Commit Graph
13 Commits
Author SHA1 Message Date
jimmyandClaude Opus 5.5 c7546e5ea9 Show in the test show whether the pads are on the cans or the movers.
A Pads layer frame under the movers pads has Cans pads and Movers pads
buttons (scripts/shows/layer_indicator.py). The pad controller holds channel
16 note 0 (cans) or 1 (movers) down and the other up whenever Pause changes,
QLC+ reloads or it starts, and the Flash buttons light while their note is
held, so the lit one is the layer and a missed message can't leave them the
wrong way round. Each flashes an empty scene of its own: with one between
them, QLC+ lit both.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 15:09:49 +13:00
jimmyandClaude Opus 5.5 cf94c7b1ba Press the colours again when a restarted QLC+ links itself to the pad controller.
The pad controller only took a QLC+ reload as one when it had to make the
link to QLC+ itself. A restarted QLC+ often subscribes to the virtual port on
its own as it opens the show, before the next check, so the colours stayed off.
Each check now also notes the QLC+ process and port it feeds (qlc_feeds), and a
new one counts as a reload too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 13:57:22 +13:00
jimmyandClaude Opus 5.5 4fd11445e8 Add cabaret's can patterns to the test show.
Eight of make_cabaret_vc.py's Can Patterns on the cans pads 1-8, in a Can
patterns solo frame in place of the pads frame's empty Buttons 53-60:
Theater, Rainbow, Odd Even, Left Right, Scanner (with a fading tail), Fill,
Center and Pairs, laid out for the test show's cans and walking the ring round
the room (scripts/shows/can_patterns.py). Collapse and Chase Out are left out.

The masks show the Colour 1 colour; Odd Even (a checkerboard) and Left Right
swap between Colour 1 and Colour 2 through four Matrix widgets in the Chase
colours frame. All of them follow the cans' Speed dial (knob 1). Each pattern is
RGB matrices running from start to stop (rgbscripts/steps.js and swap.js, linked
into ~/.qlcplus/rgbscripts), so a chase started over one lands on top, and the
pad controller restarts the pattern that is on just after a Colour 1 press so
the new colour scene doesn't cover it.

The row of 4 (#3-#6) never animates; CLAUDE.md now says so for whatever comes
next.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 13:57:13 +13:00
jimmyandClaude Opus 5.5 e7e1cf656b Remove the sound-reactive cans from the test show.
The Sound and Threshold audio triggers go, with the Sound submaster beside the
cans' Front and Back sliders (CC 100) and the Sound peak frame with its Peak
submaster and Hit button and the Cans hit functions only Hit ran. Pads 1 and 2
are plain spare buttons again (scripts/shows/drop_sound.py). The pads frame's
own Peak (knob 6) stays: it is the chases' peak.

The pad controller drops its side of it: the Pump and Threshold modes, the
CC 100 resets, holding the side knobs at the peak and the pad lamps that showed
which mode was on. Pads 1 and 2 and knobs 5, 6 and 8 pass straight through.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 13:57:00 +13:00
jimmyandClaude Opus 5.5 f674dc9fe0 Give the movers every EFX shape and drop their Strobe in the test show.
The movers layer loses its Strobe (pad 9): its button, its scene and the
forced-HTP strobe channel it needed. Its pad, the rest of the second row
and pad 5 take the five shapes the movers did not have yet: Diamond, Square,
Corners (SquareChoppy), Leaf, and Tilt (Line2 on tilt alone). All nine sit in
the Movement solo frame, one at a time, mirrored and relative to the knobs.
Knob 13's speed dial gives Corners an eighth of its time and the rest a
quarter (scripts/shows/mover_all_efx.py). The pad controller settles the
knobs after all nine.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 01:47:15 +13:00
jimmyandClaude Opus 5.5 c3fe965e79 Add Circle and Sweep for the movers to the test show.
They fill the movers layer's top row, pads 15 and 16 (notes 98 and 99), in
the Movement solo frame with Wander and Ballyhoo: a circle of about ±45° of
pan and ±21° of tilt, and a straight pan sweep of about ±60°, both mirrored
and relative to the knobs. Knob 13's speed dial gives them a quarter of its
time, 5.5 s a round to start with (scripts/shows/mover_more_efx.py). The pad
controller settles the knobs after them too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 01:47:05 +13:00
jimmyandClaude Opus 5.5 913494c0aa Add a Ballyhoo pad for the movers to the test show.
Pad 11 on the movers layer (note 94) toggles a fast figure of eight around
the Pan and Tilt knobs, like Wander: about ±85° of pan and ±26° of tilt, all
four movers together so the pairs mirror left to right and front to back
(scripts/shows/mover_ballyhoo.py).

The pad controller now settles the knobs after Ballyhoo goes off as well as
Wander, and keeps track of each separately.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 01:46:03 +13:00
jimmyandClaude Opus 5.5 00c8c2d35d Add a Wander pad for the movers to the test show.
Pad 10 on the movers layer (note 93) toggles a relative EFX that drifts all
four movers around the Pan and Tilt knobs: a 24 s Lissajous of about ±30° pan
and ±10° tilt, each mover a quarter of the way further round, easing in over
2 s (scripts/shows/mover_wander.py).

QLC+ 4.12 leaves a relative EFX's last offset on the movers when it stops,
until the sliders under it change. So when Wander goes off, the pad
controller nudges the Pan and Tilt knobs a step and puts them back, 0.1 s
apart.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 00:49:33 +13:00
jimmyandClaude Opus 5.5 9c1ef6f2d4 Read the pad over Bluetooth first, and USB when it isn't paired.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 00:02:08 +13:00
jimmyandClaude Opus 5.5 11da656ee6 Toggle the pad's bank 1 to the movers with Pause, and add a Threshold sound mode.
Pause flips bank 1 between the cans (36-51) and the movers (84-99). Threshold
flashes the cans on bass hits and is exclusive with Sound, and knob 6 is the
sides' peak. The Sound and Threshold pads light while on, and the colour pads
that were on are pressed again when QLC+ reloads the show. --lock-knobs is gone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 20:03:18 +13:00
jimmyandClaude Opus 5.5 d522b1a2cf Add sound-reactive cans, a strobe pad and side chases to the test show.
The Sound pad (bank 1 note 36) toggles a QLC+ Audio Triggers widget whose
volume bar drives a Sound submaster beside the can dimmers, so the cans'
brightness follows the music while the movers stay steady. padcontroller sends
CC 100 at full on every press and release of that pad, bypassing its CC
smoothing, so switching sound off always leaves the cans at full.

test.qxw also gains Chase forward/reverse, a double and an opposing zigzag
down the side cans (RGB matrices whose colour follows the Colour 2 pads), a
Strobe flash pad with the cans' strobe channel forced HTP, and the Dimmers
frame, forced-LTP side colours and dimmer-free colour scenes from parallel
sessions.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 17:03:27 +13:00
jimmyandClaude Opus 5.5 8f8c69898a Read the pad over USB when it's plugged in, and keep its links to the pad and QLC+ up.
padcontroller.midi now follows the pad every 2 s: it reopens it after a
replug, moves to USB when that turns up, and re-links QLC+ to the virtual
port after a restart, so QLC+ can stay open. Only the chosen source is
subscribed, so a USB pad no longer gets Bluetooth input as well.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 14:34:05 +13:00
jimmyandClaude Opus 5.5 9742121144 Rename padeditor to padcontroller, with the MIDI intercept as padcontroller.midi and its virtual port as padcontroller.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 13:25:06 +13:00