The Sound and Threshold audio triggers go, with the Sound submaster beside the cans' Front and Back sliders (CC 100) and the Sound peak frame with its Peak submaster and Hit button and the Cans hit functions only Hit ran. Pads 1 and 2 are plain spare buttons again (scripts/shows/drop_sound.py). The pads frame's own Peak (knob 6) stays: it is the chases' peak. The pad controller drops its side of it: the Pump and Threshold modes, the CC 100 resets, holding the side knobs at the peak and the pad lamps that showed which mode was on. Pads 1 and 2 and knobs 5, 6 and 8 pass straight through. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
303 lines
11 KiB
Python
303 lines
11 KiB
Python
"""Pad controller: intercept the SMC-PAD's MIDI and smooth its knob CCs so RGBW fades feel less stepped.
|
||
|
||
Reads the physical pad (Bluetooth or USB), passes pad notes through
|
||
immediately, and eases Control Change values toward their targets at
|
||
~120 Hz before emitting on a virtual port named "padcontroller".
|
||
|
||
On start it also sets the pad lamps over USB (scripts/pad/pad_lamps.py): bank 1 off and
|
||
bank 2 in the colours from shows/test.qxw. On Bluetooth it says so and carries on.
|
||
While Play is held, bank 2 notes 52–67 go out as 68–83 (see padcontroller/layer.py).
|
||
|
||
Point QLC+ MIDI input at that virtual port (midi.qxw does this via
|
||
patch_smc_pad.py once the pad controller is running). Every 2 s it checks the
|
||
links: it reopens the pad when it is replugged (or moves to Bluetooth when that
|
||
turns up) and re-links QLC+ to the virtual port after a restart, so QLC+ can stay open.
|
||
|
||
QLC+ reopens its MIDI port when it loads a show, so a new link to QLC+ while
|
||
the pad controller runs means the show has just loaded with every button off.
|
||
REOPEN_DELAY later it presses the last colour pads again (see PlayLayer.colours),
|
||
which it keeps in COLOURS_FILE so they outlive a restart of the pad controller.
|
||
|
||
When one of the movers' movement pads goes off, SETTLE_DELAY later it
|
||
nudges the Pan and Tilt knobs a step and puts them back, so QLC+ drops
|
||
the EFX's last offset (see PlayLayer.settle).
|
||
|
||
Usage:
|
||
.venv/bin/python -m padcontroller.midi
|
||
# optional: --tau 0.05 (seconds; lower = snappier, higher = silkier)
|
||
|
||
padcontroller/systemd/install.sh runs it as a systemd user service.
|
||
"""
|
||
|
||
from __future__ import annotations
|
||
|
||
import argparse
|
||
import json
|
||
import math
|
||
import os
|
||
import re
|
||
import subprocess
|
||
import sys
|
||
import time
|
||
from dataclasses import dataclass, field
|
||
from pathlib import Path
|
||
from typing import Callable
|
||
|
||
ROOT = Path(__file__).resolve().parents[1]
|
||
import glob
|
||
|
||
for p in glob.glob(str(ROOT / ".venv" / "lib" / "python*" / "site-packages")):
|
||
sys.path.insert(0, p)
|
||
import rtmidi
|
||
|
||
from padcontroller.layer import PlayLayer # noqa: E402
|
||
|
||
# The lamp colours come from the show scripts, which are not part of this package.
|
||
sys.path.insert(0, str(ROOT / "scripts" / "pad"))
|
||
from pad_lamps import set_lamps # noqa: E402
|
||
|
||
VIRTUAL_NAME = "padcontroller"
|
||
COLOURS_FILE = Path(os.environ.get("XDG_STATE_HOME", Path.home() / ".local" / "state")) / "padcontroller" / "colours.json"
|
||
REOPEN_DELAY = 1.5 # s for QLC+ to finish loading the virtual console
|
||
SETTLE_DELAY = 0.1 # s for QLC+ to stop a relative EFX before the knob nudge, and between its two steps
|
||
# Bluetooth first when the pad is paired, USB otherwise.
|
||
SOURCE_HINTS = (
|
||
"SMC-PAD Bluetooth",
|
||
"SINCO SMC-PAD-Master",
|
||
"SINCO SMC-PAD-Private",
|
||
"SINCO",
|
||
"SMC-PAD",
|
||
)
|
||
|
||
|
||
def pick_source(names: list[str]) -> int | None:
|
||
"""Index of the best SMC-PAD port in names, or None when the pad is not there."""
|
||
for hint in SOURCE_HINTS:
|
||
for i, name in enumerate(names):
|
||
if hint in name and VIRTUAL_NAME not in name:
|
||
return i
|
||
return None
|
||
|
||
|
||
def find_source_port(midiin: rtmidi.MidiIn) -> int:
|
||
ports = midiin.get_ports()
|
||
i = pick_source(ports)
|
||
if i is None:
|
||
raise SystemExit(
|
||
"No SMC-PAD MIDI source found. Ports:\n " + "\n ".join(ports or ["(none)"])
|
||
)
|
||
return i
|
||
|
||
|
||
@dataclass
|
||
class AlsaPort:
|
||
addr: str # "client:port"
|
||
client: str
|
||
name: str
|
||
to: set[str] = field(default_factory=set)
|
||
sources: set[str] = field(default_factory=set)
|
||
|
||
|
||
def parse_aconnect(text: str) -> list[AlsaPort]:
|
||
"""The ports in `aconnect -l` output, with who they connect to and from."""
|
||
ports: list[AlsaPort] = []
|
||
client = client_name = None
|
||
for line in text.splitlines():
|
||
m = re.match(r"client (\d+): '([^']+)'", line)
|
||
if m:
|
||
client, client_name = m.group(1), m.group(2)
|
||
continue
|
||
m = re.match(r"\s+(\d+)\s+'([^']+)'", line)
|
||
if m and client is not None:
|
||
ports.append(AlsaPort(f"{client}:{m.group(1)}", client_name, m.group(2).strip()))
|
||
continue
|
||
m = re.match(r"\s+(Connecting To|Connected From):(.*)", line)
|
||
if m and ports:
|
||
addrs = set(re.findall(r"\d+:\d+", m.group(2)))
|
||
(ports[-1].to if m.group(1) == "Connecting To" else ports[-1].sources).update(addrs)
|
||
return ports
|
||
|
||
|
||
def missing_links(ports: list[AlsaPort], src_name: str | None) -> list[tuple[str, str]]:
|
||
"""(from, to) ALSA links the pad controller should have but doesn't.
|
||
|
||
The pad into padcontroller-in (Bluetooth MIDI sometimes drops it, and a replugged
|
||
USB pad comes back without it), and padcontroller out to every QLC+ client
|
||
(QLC+ only subscribes when it opens the port, so it loses it when we restart).
|
||
"""
|
||
links = []
|
||
ours_in = next((p for p in ports if p.client == "padcontroller-in"), None)
|
||
ours_out = next((p for p in ports if p.client == "padcontroller-out"), None)
|
||
m = re.search(r"(\d+:\d+)$", src_name or "")
|
||
if ours_in and m and m.group(1) not in ours_in.sources:
|
||
links.append((m.group(1), ours_in.addr))
|
||
if ours_out:
|
||
for p in ports:
|
||
if p.client == "qlcplus" and p.addr not in ours_out.to:
|
||
links.append((ours_out.addr, p.addr))
|
||
return links
|
||
|
||
|
||
def ensure_links(src_name: str | None) -> bool:
|
||
"""Make the missing links. True when one of them is to QLC+."""
|
||
try:
|
||
out = subprocess.check_output(["aconnect", "-l"], text=True)
|
||
except (FileNotFoundError, subprocess.CalledProcessError):
|
||
return False
|
||
ports = parse_aconnect(out)
|
||
qlc = {p.addr for p in ports if p.client == "qlcplus"}
|
||
to_qlc = False
|
||
for src, dst in missing_links(ports, src_name):
|
||
if subprocess.run(["aconnect", src, dst], capture_output=True).returncode == 0:
|
||
print(f"Linked {src} -> {dst}", flush=True)
|
||
to_qlc = to_qlc or dst in qlc
|
||
return to_qlc
|
||
|
||
|
||
def load_colours(layer: PlayLayer) -> None:
|
||
try:
|
||
saved = json.loads(COLOURS_FILE.read_text())
|
||
layer.colours = {int(k): tuple(v) if v else None for k, v in saved.items()}
|
||
except (OSError, ValueError, TypeError):
|
||
pass
|
||
|
||
|
||
def save_colours(layer: PlayLayer) -> None:
|
||
try:
|
||
COLOURS_FILE.parent.mkdir(parents=True, exist_ok=True)
|
||
COLOURS_FILE.write_text(json.dumps(layer.colours) + "\n")
|
||
except OSError as exc:
|
||
print(f"Colours not saved: {exc}", flush=True)
|
||
|
||
|
||
def main() -> None:
|
||
ap = argparse.ArgumentParser(description=__doc__)
|
||
ap.add_argument(
|
||
"--tau",
|
||
type=float,
|
||
default=0.055,
|
||
help="smoothing time constant in seconds (default 0.055)",
|
||
)
|
||
ap.add_argument("--rate", type=float, default=120.0, help="update Hz")
|
||
ap.add_argument("--no-lamps", action="store_true", help="leave the pad lamp colours alone")
|
||
args = ap.parse_args()
|
||
|
||
midiin = rtmidi.MidiIn(rtapi=rtmidi.API_LINUX_ALSA, name="padcontroller-in")
|
||
midiout = rtmidi.MidiOut(rtapi=rtmidi.API_LINUX_ALSA, name="padcontroller-out")
|
||
|
||
src = find_source_port(midiin)
|
||
src_name = midiin.get_ports()[src]
|
||
midiin.open_port(src)
|
||
midiin.ignore_types(timing=True, active_sense=True, sysex=True)
|
||
midiout.open_virtual_port(VIRTUAL_NAME)
|
||
|
||
# current/target as floats 0..127, keyed by (channel, cc)
|
||
current: dict[tuple[int, int], float] = {}
|
||
target: dict[tuple[int, int], float] = {}
|
||
last_sent: dict[tuple[int, int], int] = {}
|
||
layer = PlayLayer()
|
||
load_colours(layer)
|
||
saved_colours = dict(layer.colours)
|
||
reopen_at: float | None = None
|
||
# (when, messages to send then), for the settle after a mover EFX
|
||
later: list[tuple[float, Callable[[], list[list[int]]]]] = []
|
||
# Links made this soon after start are ours being restored, with QLC+'s buttons as they were.
|
||
reopen_from = time.monotonic() + 5.0
|
||
|
||
print(f"Source: {src_name}", flush=True)
|
||
print(f"Virtual: {VIRTUAL_NAME} (tau={args.tau}s @ {args.rate} Hz)", flush=True)
|
||
print("Pass notes through (Play held shifts bank 2 up 16); smooth CC. Ctrl+C to stop.", flush=True)
|
||
ensure_links(src_name)
|
||
if not args.no_lamps:
|
||
set_lamps()
|
||
|
||
dt = 1.0 / args.rate
|
||
alpha = 1.0 - math.exp(-dt / max(args.tau, 1e-4))
|
||
next_link_check = time.monotonic() + 2.0
|
||
|
||
try:
|
||
while True:
|
||
now = time.monotonic()
|
||
if now >= next_link_check:
|
||
# Follow the pad: reopen it when it comes back, and move to Bluetooth when paired.
|
||
names = midiin.get_ports()
|
||
best = pick_source(names)
|
||
best_name = names[best] if best is not None else None
|
||
if best_name != src_name:
|
||
midiin.close_port()
|
||
if best is not None:
|
||
midiin.open_port(best)
|
||
print(f"Source: {best_name}", flush=True)
|
||
else:
|
||
print("Source: (pad gone, waiting)", flush=True)
|
||
src_name = best_name
|
||
if ensure_links(src_name) and now >= reopen_from:
|
||
reopen_at = now + REOPEN_DELAY
|
||
next_link_check = now + 2.0
|
||
|
||
if reopen_at is not None and now >= reopen_at:
|
||
reopen_at = None
|
||
taps = layer.reopen()
|
||
for out in taps:
|
||
midiout.send_message(out)
|
||
print(f"QLC+ reopened: pressed {sum(out[0] & 0xF0 == 0x90 for out in taps)} colour pad(s) again", flush=True)
|
||
|
||
# Drain inbound
|
||
while True:
|
||
msg = midiin.get_message()
|
||
if msg is None:
|
||
break
|
||
data, _ = msg
|
||
if not data:
|
||
continue
|
||
for out in layer.handle(list(data)):
|
||
cmd = out[0] & 0xF0
|
||
if cmd == 0xB0 and len(out) >= 3:
|
||
# Control Change → smooth
|
||
key = (out[0] & 0x0F, out[1])
|
||
target[key] = float(out[2])
|
||
if key not in current:
|
||
current[key] = float(out[2])
|
||
last_sent[key] = -1
|
||
else:
|
||
# Notes, aftertouch, PC, etc. → immediate
|
||
midiout.send_message(out)
|
||
if layer.settle:
|
||
layer.settle = False
|
||
later += [(now + SETTLE_DELAY, layer.nudge), (now + 2 * SETTLE_DELAY, layer.positions)]
|
||
for due in [item for item in later if now >= item[0]]:
|
||
later.remove(due)
|
||
for out in due[1]():
|
||
midiout.send_message(out)
|
||
if layer.colours != saved_colours:
|
||
save_colours(layer)
|
||
saved_colours = dict(layer.colours)
|
||
|
||
# Ease CC toward targets and emit when quantized value moves
|
||
for key, tgt in list(target.items()):
|
||
cur = current.get(key, tgt)
|
||
cur = cur + (tgt - cur) * alpha
|
||
# Snap when close so we actually reach the endpoint
|
||
if abs(tgt - cur) < 0.15:
|
||
cur = tgt
|
||
current[key] = cur
|
||
q = int(round(cur))
|
||
q = 0 if q < 0 else 127 if q > 127 else q
|
||
if last_sent.get(key) != q:
|
||
ch, cc = key
|
||
midiout.send_message([0xB0 | ch, cc, q])
|
||
last_sent[key] = q
|
||
|
||
time.sleep(dt)
|
||
except KeyboardInterrupt:
|
||
print("\nStopped.", flush=True)
|
||
finally:
|
||
midiin.close_port()
|
||
midiout.close_port()
|
||
del midiin
|
||
del midiout
|
||
|
||
|
||
if __name__ == "__main__":
|
||
main()
|