fc8abf9c99
Set the movers' zeros and pan directions, swap M1/M2's patch, and model tilt in the simulator.
jimmyandClaude Opus 5.52026-10-22 22:54:14 +13:00
2b0f9e2f9b
Re-arrange the test show's console and put the movers' brightness with their position knobs.
jimmyandClaude Opus 5.52026-10-22 20:47:22 +13:00
2219788904
Give the test show Dimmers knobs instead of the custom colour mixer, and add Amber.
jimmyandClaude Opus 5.52026-10-22 20:03:18 +13:00
11da656ee6
Toggle the pad's bank 1 to the movers with Pause, and add a Threshold sound mode.
jimmyandClaude Opus 5.52026-10-22 20:03:18 +13:00
72c227b153
Merge dev into main: the pad controller, simulator, Chataigne export and test show.
jimmyandClaude Opus 5.52026-10-22 20:00:21 +13:00
86d87bf8cf
Add a movers bank and Pan, Tilt, Focus and Rotate knobs to the test show.
jimmyandClaude Opus 5.52026-10-22 19:56:38 +13:00
18f0ac2dc5
Add a virtual pad and an end-to-end test against the simulator, and run tests with pytest.
jimmyandClaude Opus 5.52026-10-22 17:58:04 +13:00
d522b1a2cf
Add sound-reactive cans, a strobe pad and side chases to the test show.
jimmyandClaude Opus 5.52026-10-22 17:03:27 +13:00
6bbb3d5a29
Add CLAUDE.md: check the pad controller and simulator are up, and keep the test show on 127.0.0.1.
jimmyandClaude Opus 5.52026-10-22 14:34:05 +13:00
643f7c8fb6
Send the test show's Art-Net to 127.0.0.1 for the simulator.
jimmyandClaude Opus 5.52026-10-22 14:34:05 +13:00
8f8c69898a
Read the pad over USB when it's plugged in, and keep its links to the pad and QLC+ up.
jimmyandClaude Opus 5.52026-10-22 14:34:05 +13:00
a295fefac0
Pick the simulator's stage map from a drop-down, and make the QLC+ show optional.
jimmyandClaude Opus 5.52026-10-22 14:05:42 +13:00
df05c8ca49
Add a systemd user service and installer for the stage simulator.
jimmyandClaude Opus 5.52026-10-22 13:29:23 +13:00
20f018a523
Let the padcontroller installer install the service without enabling it at login.
jimmyandClaude Opus 5.52026-10-22 13:27:48 +13:00
9742121144
Rename padeditor to padcontroller, with the MIDI intercept as padcontroller.midi and its virtual port as padcontroller.
jimmyandClaude Opus 5.52026-10-22 13:25:06 +13:00
1e09cb3825
Rename the MIDI intercept to padcontroller, as a module and as a service.
jimmyandClaude Opus 5.52026-10-22 12:33:43 +13:00
00de2595b6
Move the SMC-PAD MIDI intercept into padeditor and add a systemd user service with an installer.
jimmyandClaude Opus 5.52026-10-22 12:06:31 +13:00
3992744a1d
Light pad bank 2 from page 7, and add factory reset and a pad bank toggle to the editor.
jimmyandClaude Sonnet 5.52026-10-21 20:34:34 +13:00
63b3129cca
Add an SMC-PAD preset editor that saves pad colours the way MidiSuite does.
jimmyandClaude Opus 5.52026-10-21 19:30:34 +13:00
adca8e17a4
Put the XCHC colour scenes on the virtual console for the SMC-PAD.
jimmyandCursor2026-10-21 17:39:13 +13:00
24f9ca300e
Add a stage simulator that draws the rig from Art-Net.
jimmyandCursor2026-10-21 17:39:13 +13:00
9b5f6b5bdd
Add figure-8 and full-stage animations that can be previewed over Art-Net.
jimmyandCursor2026-10-21 17:39:13 +13:00
bb6e51cdc9
Build the simple console from a show spec instead of hand-written XML.
jimmyandCursor2026-10-21 17:39:13 +13:00
4374ffb430
Add a show compiler so QLC+ workspaces can be described and tested.
jimmyandCursor2026-10-21 17:39:13 +13:00
fee1985e1a
Record the XCHC hang, patch, and aiming on the stage map.
jimmyandCursor2026-10-21 17:39:13 +13:00
aa287b0adc
Match the Small Eye mode to the lamp by swapping zoom and lens rotate.
jimmyandCursor2026-10-21 17:39:13 +13:00
3b0920eeb2
Add a script that writes SMC-PAD pad colours and saves them on the controller.
jimmyandCursor2026-10-21 17:38:20 +13:00
f4b927e0cb
Update the open mic knob diagram.
jimmyandCursor2026-10-21 15:53:22 +13:00
9d1d254e39
Add the Temple of Techno show for fifteen cans and four movers.
jimmyandCursor2026-10-21 15:53:22 +13:00
97ce89fcbd
Add a simple show for eight BT270 pars.
jimmyandCursor2026-10-21 15:53:22 +13:00
185d885e39
Add the Flow Forum show and its colour cues.
jimmyandCursor2026-10-21 15:53:22 +13:00
68f8e1913d
Add the Ludi show for the eight cans and two Small Eyes.
jimmyandCursor2026-10-21 15:53:22 +13:00
4b53f506e9
Repatch the default show onto fifteen cans and four movers.
jimmyandCursor2026-10-21 15:53:22 +13:00
10c39015b7
Preview open-mic colour on the rig and save it back to the pad.
jimmyandCursor2026-10-21 15:53:22 +13:00
c9df537567
Set SMC-PAD colours over the pad's existing Bluetooth link.
jimmyandCursor2026-10-21 15:53:22 +13:00
b1181e6f28
Edit mover patterns from the SMC-PAD and save the corner aims.
jimmyandCursor2026-10-21 15:53:22 +13:00
1b181640dd
Start twisted in all-colour-1 and let pad 1 wander the movers.
jimmyandCursor2026-10-21 15:53:22 +13:00
9f40933227
Drive the twisted cans and movers from the SMC-PAD over Art-Net.
jimmyandCursor2026-10-21 15:53:22 +13:00
dc05192a25
Keep each mover's pan and tilt when the shared SMC-PAD knobs turn.
jimmyandCursor2026-10-21 15:53:22 +13:00
7317bcb486
Rebuild the cabaret virtual console for the current patch and mover looks.
jimmyandCursor2026-10-21 15:53:22 +13:00
1a4e51e449
Aim the cabaret movers from a page and keep the named positions.
jimmyandCursor2026-10-21 15:53:22 +13:00
6c5223eec5
Drive the two cabaret Small Eyes over Art-Net without QLC+.
jimmyandCursor2026-10-21 15:53:22 +13:00
7ff1519abc
Put Small Eye lens rotate on channel 6 and zoom on channel 7.
jimmyandCursor2026-10-21 15:53:22 +13:00
12420bec93
Add Pattern Studio, SMC-PAD MIDI helpers, and the current venue workspaces.
jimmyandCursor2026-10-20 15:05:04 +13:00
c72a8d6f26
Find MidiSuite's SMC-PAD save method without talking to the pad.
jimmyandCursor2026-10-19 20:36:57 +13:00
97d4449a86
Save the open mic levels and split can brightness into sides and centre.
jimmyandCursor2026-10-19 19:53:07 +13:00
084f77c840
Merge remote main before pushing the open mic show.
jimmy2026-10-19 19:20:03 +13:00
ab364601ce
Add the open mic show for the front movers and floor cans.
jimmyandCursor2026-10-19 19:19:37 +13:00