Put the movers' Wander and Ballyhoo speed on knob 13 in the test show.
A Movers speed dial on knob 13 (CC 42), beside the cans' Speed dial, sets how long Wander takes to go round and gives Ballyhoo an eighth of it (scripts/shows/mover_speed.py). QLC+ 4.12 counts an EFX's fade-in inside every round, so Wander has been taking 22 s and Ballyhoo 2.5 s, not 24 s and 3 s. The dial keeps those as its starting point and runs from 62 s and 7.5 s fully left to 10 s and 1 s fully right. The fade-ins stay, so the movers don't jump when either starts. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
ae186c51ea
commit
09aab70bd6
4 files changed
+85
-4
No files matched your search
@@ -5,11 +5,11 @@ On the movers layer (Pause on), pad 11 toggles a fast, wide figure of eight
|
||||
around wherever the Pan and Tilt knobs (9 and 10, CC 38 and 39) put the movers,
|
||||
as Wander does:
|
||||
|
||||
94 Ballyhoo an Eight about ±85° of pan and ±26° of tilt, 3 s round
|
||||
94 Ballyhoo an Eight about ±85° of pan and ±26° of tilt, 2.5 s round
|
||||
|
||||
All four start together. M1 and M4 turn the other way to M2 and M3, so the
|
||||
same move mirrors left to right and front to back, and the beams sweep out
|
||||
and cross in the middle together. It fades in over 0.5 s. When it goes off,
|
||||
and cross in the middle together. It fades in over 0.5 s, which QLC+ counts inside each 3 s round. When it goes off,
|
||||
the pad controller nudges the two knobs so QLC+ drops its last offset
|
||||
(padcontroller/layer.py).
|
||||
|
||||
|
||||
@@ -0,0 +1,64 @@
|
||||
#!/usr/bin/env python3
|
||||
"""Add a Movers speed dial on knob 13 to shows/test.qxw.
|
||||
|
||||
Knob 13 (CC 42) sets how long Wander and Ballyhoo take to go round, as knob 1
|
||||
does for the cans' chases. Wander gets the dial's time and Ballyhoo an eighth of
|
||||
it. QLC+ 4.12 counts an EFX's fade-in inside every round, not just the first, so
|
||||
a round takes that less its fade-in (2 s for Wander, 0.5 s for Ballyhoo):
|
||||
|
||||
Knob fully left 62 s Wander, 7.5 s Ballyhoo
|
||||
Starting value 22 s Wander, 2.5 s Ballyhoo (as before the dial)
|
||||
Knob fully right 10 s Wander, 1 s Ballyhoo
|
||||
|
||||
The fade-ins stay, so the movers don't jump when either starts. The dial sits
|
||||
beside the cans' Speed dial.
|
||||
|
||||
python3 scripts/shows/mover_speed.py
|
||||
|
||||
Run it once on a show with Wander and Ballyhoo; it stops if the dial is already there.
|
||||
QLC+ has to reopen the show to see it.
|
||||
"""
|
||||
|
||||
from __future__ import annotations
|
||||
|
||||
import re
|
||||
|
||||
from mover_bank import NO_FUNCTION, ROOT, appearance
|
||||
|
||||
SHOW = ROOT / "shows" / "test.qxw"
|
||||
|
||||
SPEED_CC = 42 # knob 13
|
||||
SLOWEST_MS, FASTEST_MS, START_MS = 64000, 12000, 24000
|
||||
# Index into QLC+'s speed dial factors: (Not Sent), 0, 1/16, 1/8, 1/4, 1/2, 1, 2, 4, 8, 16
|
||||
TIMES_1, TIMES_1_8 = 6, 3
|
||||
NOT_SENT = 0
|
||||
|
||||
|
||||
def main() -> None:
|
||||
xml = SHOW.read_text()
|
||||
if 'Caption="Movers speed"' in xml:
|
||||
raise SystemExit(f"{SHOW.relative_to(ROOT)} already has the movers speed dial")
|
||||
engine, console = xml.split("<VirtualConsole>")
|
||||
wid = max(int(i) for i in re.findall(r' ID="(\d+)"', console) if int(i) != NO_FUNCTION) + 1
|
||||
|
||||
def function(name: str) -> int:
|
||||
return int(re.search(rf'<Function ID="(\d+)" Type="EFX" Name="{name}">', engine).group(1))
|
||||
|
||||
rows = "".join(f' <Function FadeIn="{NOT_SENT}" FadeOut="{NOT_SENT}" Duration="{factor}">{function(name)}</Function>\n'
|
||||
for name, factor in (("Movers wander", TIMES_1), ("Movers ballyhoo", TIMES_1_8)))
|
||||
dial = (f' <SpeedDial Caption="Movers speed" ID="{wid}">\n'
|
||||
' <WindowState Visible="True" X="1820" Y="10" Width="110" Height="240"/>\n'
|
||||
+ appearance(" ", "Sunken")
|
||||
+ f' <AbsoluteValue Minimum="{SLOWEST_MS}" Maximum="{FASTEST_MS}">\n'
|
||||
f' <Input Universe="1" Channel="{SPEED_CC}"/>\n'
|
||||
' </AbsoluteValue>\n'
|
||||
f' <Time>{START_MS}</Time>\n'
|
||||
+ rows + ' </SpeedDial>\n')
|
||||
|
||||
xml = xml.replace(" </Frame>\n <Properties>", dial + " </Frame>\n <Properties>", 1)
|
||||
SHOW.write_text(xml)
|
||||
print(f"Added the movers speed dial to {SHOW.relative_to(ROOT)} (widget {wid}, knob 13)")
|
||||
|
||||
|
||||
if __name__ == "__main__":
|
||||
main()
|
||||
@@ -5,10 +5,11 @@ On the movers layer (Pause on), pad 10 toggles a slow relative EFX that drifts
|
||||
all four movers around wherever the Pan and Tilt knobs (9 and 10, CC 38 and 39)
|
||||
put them, so turning the knobs moves the middle of the wander:
|
||||
|
||||
93 Wander a Lissajous about ±30° of pan and ±10° of tilt, 24 s round
|
||||
93 Wander a Lissajous about ±30° of pan and ±10° of tilt, 22 s round
|
||||
|
||||
Each mover starts a quarter of the way further round, so they don't move as one.
|
||||
It fades in over 2 s, so the movers ease off the knob position. QLC+ 4.12 leaves
|
||||
It fades in over 2 s, so the movers ease off the knob position. QLC+ counts the
|
||||
fade-in inside each 24 s round, which leaves 22 s. QLC+ 4.12 leaves
|
||||
a relative EFX's last offset on the movers when it stops (with or without a
|
||||
fade-out), so the pad controller nudges the two knobs when Wander goes off
|
||||
(padcontroller/layer.py).
|
||||
|
||||
@@ -2687,6 +2687,22 @@
|
||||
<Function FadeIn="0" FadeOut="0" Duration="9">45</Function>
|
||||
<Function FadeIn="0" FadeOut="0" Duration="9">50</Function>
|
||||
</SpeedDial>
|
||||
<SpeedDial Caption="Movers speed" ID="115">
|
||||
<WindowState Visible="True" X="1820" Y="10" Width="110" Height="240"/>
|
||||
<Appearance>
|
||||
<FrameStyle>Sunken</FrameStyle>
|
||||
<ForegroundColor>Default</ForegroundColor>
|
||||
<BackgroundColor>Default</BackgroundColor>
|
||||
<BackgroundImage>None</BackgroundImage>
|
||||
<Font>Default</Font>
|
||||
</Appearance>
|
||||
<AbsoluteValue Minimum="64000" Maximum="12000">
|
||||
<Input Universe="1" Channel="42"/>
|
||||
</AbsoluteValue>
|
||||
<Time>24000</Time>
|
||||
<Function FadeIn="0" FadeOut="0" Duration="6">69</Function>
|
||||
<Function FadeIn="0" FadeOut="0" Duration="3">70</Function>
|
||||
</SpeedDial>
|
||||
</Frame>
|
||||
<Properties>
|
||||
<Size Width="2400" Height="1050"/>
|
||||
|
||||
Reference in new issue
Block a user