Toggle the pad's bank 1 to the movers with Pause, and add a Threshold sound mode.

Pause flips bank 1 between the cans (36-51) and the movers (84-99). Threshold
flashes the cans on bass hits and is exclusive with Sound, and knob 6 is the
sides' peak. The Sound and Threshold pads light while on, and the colour pads
that were on are pressed again when QLC+ reloads the show. --lock-knobs is gone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
jimmyandClaude Opus 5.5 committed 2026-10-22 20:03:18 +13:00
1 parent 72c227b153
commit 11da656ee6
6 files changed
+378 -81

No files matched your search

+1 -1
View File
@@ -62,7 +62,7 @@ it as a systemd user service that starts at login and waits for the pad:
padcontroller/systemd/install.sh
```
Options after the command go to the pad controller (for example `--lock-knobs`).
Options after the command go to the pad controller (for example `--no-lamps`).
`--no-enable` installs it without starting it at login (start it with
`systemctl --user start padcontroller`). `--uninstall` removes the service. Logs: `journalctl --user -u padcontroller -f`.
+113 -32
View File
@@ -4,16 +4,37 @@ The SMC-PAD sends CC 27 as 127 when Play goes down and 0 when it comes up.
While it is down, pad notes 52–67 go out as 68–83, so QLC+ can tell a
second set of buttons from the first. Play itself is not passed on.
With lock_knobs, knobs 1–5 (CC 30–34) drive colour 1's sliders and knobs 6–10
(CC 35–39) drive colour 2's, but only after the Custom pad (note 67, or 83
with Play held) has been pressed. Pressing any other bank 2 pad locks them
again, and its sliders are sent back to zero so their scenes stop.
Locked knob turns are dropped.
Pause (CC 28) does the same for bank 1, but toggles: each press flips it.
Off, bank 1 pads 36–51 go out as they are, for the cans. On, they go out as
84–99, for the movers. Pause itself is not passed on. The movers are not
sound reactive, so Sound and Threshold (84 and 85) do nothing on their layer.
The Sound pad (note 36) toggles QLC+'s audio triggers, which pump the cans'
Sound submaster in the Dimmers frame. Every press and release also sends CC 100
at full, so switching sound off leaves the cans at full rather than wherever
the music left them.
The Threshold pad (note 37) toggles a second audio trigger, which flashes the
cans to full on bass hits. While it is on, CC 100 is held at 0 so the cans sit
dark between hits; switching it off puts the submaster back to full.
The two are exclusive: turning one on taps the other's note first when it is
on, so QLC+ switches it off.
Knob 6 (CC 35) is the sides' peak. It goes on to the Peak submasters, which
set how bright the Threshold hits, the chases and the strobe flash. While Sound is on,
it also holds both side sliders (knobs 5 and 8, CC 34 and 37) at its value, so
the bass pumps the sides up to it; turns of knobs 5 and 8 meanwhile are kept
and put back when Sound goes off.
pump and threshold follow the two pads' presses, so the pad controller can
light whichever is on. QLC+ sends no feedback for its audio triggers, so they
are only a guess; reopen() clears them, as QLC+ starts with both off.
colours holds the last colour pad pressed in each set, as sent (52–67 for the
cans, 68–83 for the movers), or None once it is pressed again: the colour
buttons toggle in a solo frame. QLC+ does not save which buttons are on, so
reopen() presses them again when QLC+ loads the show.
"""
from __future__ import annotations
@@ -22,20 +43,30 @@ PLAY_CC = 27
FIRST_NOTE = 52
LAST_NOTE = 67
SHIFT = 16
CUSTOM_NOTE = 67
KNOB_FIRST_CC = 30
KNOBS_PER_LAYER = 5
PAUSE_CC = 28
BANK_1_FIRST = 36
BANK_1_LAST = 51
MOVERS_SHIFT = 48 # bank 1 goes out as 84–99 while Pause is on, above bank 2's held layer
SOUND_NOTE = 36
THRESHOLD_NOTE = 37
SUBMASTER_CC = 100
KNOB_CHANNEL = 0
PEAK_CC = 35 # knob 6
SIDE_CCS = (34, 37) # knobs 5 and 8: Cans 9–15 and Cans 1, 2, 7, 8
class PlayLayer:
def __init__(self, lock_knobs: bool = False) -> None:
self.lock_knobs = lock_knobs
self.unlocked: set[int] = set() # layers 0 and 1
def __init__(self) -> None:
self.held = False
self.movers = False # Pause toggles bank 1 between the cans and the movers
# (channel, note as pressed) -> note sent, so a release matches its press
self.sent: dict[tuple[int, int], int] = {}
self.pump = False
self.threshold = False
# Last value of each knob below, from the pad; QLC+ starts them at full.
self.knobs = {cc: 127 for cc in (PEAK_CC, *SIDE_CCS)}
# set -> (channel, note sent) of the colour that is on
self.colours: dict[int, tuple[int, int] | None] = {1: None, 2: None}
def handle(self, data: list[int]) -> list[list[int]]:
"""The messages to send on. Empty when the message is swallowed."""
@@ -45,30 +76,80 @@ class PlayLayer:
if kind == 0xB0 and len(data) >= 3 and data[1] == PLAY_CC:
self.held = data[2] > 0
return []
if kind == 0xB0 and len(data) >= 3 and self.lock_knobs:
index = data[1] - KNOB_FIRST_CC
if 0 <= index < 2 * KNOBS_PER_LAYER and index // KNOBS_PER_LAYER not in self.unlocked:
return []
if kind == 0xB0 and len(data) >= 3 and data[1] == PAUSE_CC:
if data[2] > 0:
self.movers = not self.movers
return []
if kind == 0xB0 and len(data) >= 3 and channel == KNOB_CHANNEL and data[1] in self.knobs:
self.knobs[data[1]] = data[2]
if data[1] == PEAK_CC:
return [list(data), *self.sides()]
return [] if self.pump else [list(data)]
if kind not in (0x80, 0x90) or len(data) < 3:
return [list(data)]
note = data[1]
key = (channel, note)
key = (channel, data[1])
is_on = kind == 0x90 and data[2] > 0
extra: list[list[int]] = []
if is_on and FIRST_NOTE <= note <= LAST_NOTE:
layer = 1 if self.held else 0
if note == CUSTOM_NOTE:
self.unlocked.add(layer)
elif layer in self.unlocked:
self.unlocked.discard(layer)
first = KNOB_FIRST_CC + layer * KNOBS_PER_LAYER
extra = [[0xB0, first + n, 0] for n in range(KNOBS_PER_LAYER)]
if note == SOUND_NOTE:
# Again on release, after any spectrum frame QLC+ still had queued
extra = [[0xB0, SUBMASTER_CC, 127]]
if is_on:
out = note + SHIFT if self.held and FIRST_NOTE <= note <= LAST_NOTE else note
out = self.shifted(data[1])
self.sent[key] = out
else:
out = self.sent.pop(key, note)
return [[status, out, *data[2:]], *extra]
out = self.sent.pop(key, data[1])
note = out
before: list[list[int]] = []
extra: list[list[int]] = []
if note == SOUND_NOTE:
if is_on:
if self.threshold:
before = tap(channel, THRESHOLD_NOTE)
self.threshold = False
self.pump = not self.pump
extra = self.sides(restore=not self.pump)
# Again on release, after any spectrum frame QLC+ still had queued
extra = [*extra, [0xB0, SUBMASTER_CC, 127]]
elif note == THRESHOLD_NOTE:
if is_on:
if self.pump:
before = tap(channel, SOUND_NOTE)
self.pump = False
extra = self.sides(restore=True)
self.threshold = not self.threshold
extra = [*extra, [0xB0, SUBMASTER_CC, 0 if self.threshold else 127]]
if is_on and FIRST_NOTE <= out <= LAST_NOTE + SHIFT:
colour_set = 1 if out <= LAST_NOTE else 2
pressed = (channel, out)
self.colours[colour_set] = None if self.colours[colour_set] == pressed else pressed
return [*before, [status, out, *data[2:]], *extra]
def shifted(self, note: int) -> int:
"""The note a press goes out as: bank 2 up while Play is held, bank 1 up while Pause is on."""
if self.held and FIRST_NOTE <= note <= LAST_NOTE:
return note + SHIFT
if self.movers and BANK_1_FIRST <= note <= BANK_1_LAST:
return note + MOVERS_SHIFT
return note
def reopen(self) -> list[list[int]]:
"""QLC+ has loaded the show: everything is off. Press the colours that were on.
The Sound submaster goes back to full too, as sound is off.
"""
self.pump = False
self.threshold = False
out = []
for colour in self.colours.values():
if colour is not None:
out += tap(*colour)
return out + [[0xB0, SUBMASTER_CC, 127]]
def sides(self, restore: bool = False) -> list[list[int]]:
"""The side sliders at the peak while Sound is on, or back at their own knobs."""
if restore:
return [[0xB0 | KNOB_CHANNEL, cc, self.knobs[cc]] for cc in SIDE_CCS]
if not self.pump:
return []
return [[0xB0 | KNOB_CHANNEL, cc, self.knobs[PEAK_CC]] for cc in SIDE_CCS]
def tap(channel: int, note: int) -> list[list[int]]:
"""A press and release of note, to toggle a QLC+ button off."""
return [[0x90 | channel, note, 127], [0x80 | channel, note, 0]]
+88 -11
View File
@@ -6,6 +6,7 @@ immediately, and eases Control Change values toward their targets at
On start it also sets the pad lamps over USB (scripts/pad/pad_lamps.py): bank 1 off and
bank 2 in the colours from shows/test.qxw. On Bluetooth it says so and carries on.
While it runs, the Pump and Threshold pads (notes 36 and 37) light while their mode is on.
While Play is held, bank 2 notes 52–67 go out as 68–83 (see padcontroller/layer.py).
Point QLC+ MIDI input at that virtual port (midi.qxw does this via
@@ -13,6 +14,11 @@ patch_smc_pad.py once the pad controller is running). Every 2 s it checks the
links: it reopens the pad when it is replugged (or moves to USB when that turns
up) and re-links QLC+ to the virtual port after a restart, so QLC+ can stay open.
QLC+ reopens its MIDI port when it loads a show, so a new link to QLC+ while
the pad controller runs means the show has just loaded with every button off.
REOPEN_DELAY later it presses the last colour pads again (see PlayLayer.colours),
which it keeps in COLOURS_FILE so they outlive a restart of the pad controller.
Usage:
.venv/bin/python -m padcontroller.midi
# optional: --tau 0.05 (seconds; lower = snappier, higher = silkier)
@@ -23,10 +29,13 @@ padcontroller/systemd/install.sh runs it as a systemd user service.
from __future__ import annotations
import argparse
import json
import math
import os
import re
import subprocess
import sys
import threading
import time
from dataclasses import dataclass, field
from pathlib import Path
@@ -42,9 +51,11 @@ from padcontroller.layer import SUBMASTER_CC, PlayLayer # noqa: E402
# The lamp colours come from the show scripts, which are not part of this package.
sys.path.insert(0, str(ROOT / "scripts" / "pad"))
from pad_lamps import set_lamps # noqa: E402
from pad_lamps import set_lamps, set_sound_lamps # noqa: E402
VIRTUAL_NAME = "padcontroller"
COLOURS_FILE = Path(os.environ.get("XDG_STATE_HOME", Path.home() / ".local" / "state")) / "padcontroller" / "colours.json"
REOPEN_DELAY = 1.5 # s for QLC+ to finish loading the virtual console
# USB first when the pad is plugged in, Bluetooth otherwise.
SOURCE_HINTS = (
"SINCO SMC-PAD-Master",
@@ -123,14 +134,63 @@ def missing_links(ports: list[AlsaPort], src_name: str | None) -> list[tuple[str
return links
def ensure_links(src_name: str | None) -> None:
def ensure_links(src_name: str | None) -> bool:
"""Make the missing links. True when one of them is to QLC+."""
try:
out = subprocess.check_output(["aconnect", "-l"], text=True)
except (FileNotFoundError, subprocess.CalledProcessError):
return
for src, dst in missing_links(parse_aconnect(out), src_name):
return False
ports = parse_aconnect(out)
qlc = {p.addr for p in ports if p.client == "qlcplus"}
to_qlc = False
for src, dst in missing_links(ports, src_name):
if subprocess.run(["aconnect", src, dst], capture_output=True).returncode == 0:
print(f"Linked {src} -> {dst}", flush=True)
to_qlc = to_qlc or dst in qlc
return to_qlc
def load_colours(layer: PlayLayer) -> None:
try:
saved = json.loads(COLOURS_FILE.read_text())
layer.colours = {int(k): tuple(v) if v else None for k, v in saved.items()}
except (OSError, ValueError, TypeError):
pass
def save_colours(layer: PlayLayer) -> None:
try:
COLOURS_FILE.parent.mkdir(parents=True, exist_ok=True)
COLOURS_FILE.write_text(json.dumps(layer.colours) + "\n")
except OSError as exc:
print(f"Colours not saved: {exc}", flush=True)
class SoundLamps:
"""Show which sound pad is on, off the MIDI loop: each write takes ~60 ms."""
def __init__(self) -> None:
self.wanted: tuple[bool, bool] | None = None
self.wake = threading.Event()
threading.Thread(target=self._run, daemon=True).start()
def show(self, pump: bool, threshold: bool) -> None:
self.wanted = (pump, threshold)
self.wake.set()
def _run(self) -> None:
shown = None
while True:
self.wake.wait()
self.wake.clear()
wanted = self.wanted
if wanted is None or wanted == shown:
continue
try:
set_sound_lamps(*wanted)
shown = wanted
except (SystemExit, Exception) as exc: # no Private port on Bluetooth
print(f"Sound lamps not set: {exc}", flush=True)
def main() -> None:
@@ -142,11 +202,6 @@ def main() -> None:
help="smoothing time constant in seconds (default 0.055)",
)
ap.add_argument("--rate", type=float, default=120.0, help="update Hz")
ap.add_argument(
"--lock-knobs",
action="store_true",
help="knobs 1-10 move test.qxw's custom sliders only after the Custom pad is pressed",
)
ap.add_argument("--no-lamps", action="store_true", help="leave the pad lamp colours alone")
args = ap.parse_args()
@@ -163,14 +218,21 @@ def main() -> None:
current: dict[tuple[int, int], float] = {}
target: dict[tuple[int, int], float] = {}
last_sent: dict[tuple[int, int], int] = {}
layer = PlayLayer(lock_knobs=args.lock_knobs)
layer = PlayLayer()
load_colours(layer)
saved_colours = dict(layer.colours)
reopen_at: float | None = None
# Links made this soon after start are ours being restored, with QLC+'s buttons as they were.
reopen_from = time.monotonic() + 5.0
print(f"Source: {src_name}", flush=True)
print(f"Virtual: {VIRTUAL_NAME} (tau={args.tau}s @ {args.rate} Hz)", flush=True)
print("Pass notes through (Play held shifts bank 2 up 16); smooth CC. Ctrl+C to stop.", flush=True)
ensure_links(src_name)
sound_lamps = None
if not args.no_lamps:
set_lamps()
sound_lamps = SoundLamps()
dt = 1.0 / args.rate
alpha = 1.0 - math.exp(-dt / max(args.tau, 1e-4))
@@ -192,9 +254,19 @@ def main() -> None:
else:
print("Source: (pad gone, waiting)", flush=True)
src_name = best_name
ensure_links(src_name)
if ensure_links(src_name) and now >= reopen_from:
reopen_at = now + REOPEN_DELAY
next_link_check = now + 2.0
if reopen_at is not None and now >= reopen_at:
reopen_at = None
taps = layer.reopen()
for out in taps:
midiout.send_message(out)
print(f"QLC+ reopened: pressed {sum(out[0] & 0xF0 == 0x90 for out in taps)} colour pad(s) again", flush=True)
if sound_lamps:
sound_lamps.show(layer.pump, layer.threshold)
# Drain inbound
while True:
msg = midiin.get_message()
@@ -215,6 +287,11 @@ def main() -> None:
else:
# Notes, aftertouch, PC, the Sound reset (always resent), etc. → immediate
midiout.send_message(out)
if sound_lamps:
sound_lamps.show(layer.pump, layer.threshold)
if layer.colours != saved_colours:
save_colours(layer)
saved_colours = dict(layer.colours)
# Ease CC toward targets and emit when quantized value moves
for key, tgt in list(target.items()):
+1 -1
View File
@@ -2,7 +2,7 @@
# Install the SMC-PAD pad controller as a systemd user service and start it.
#
# padcontroller/systemd/install.sh # install, enable, start
# padcontroller/systemd/install.sh --lock-knobs # pass options to the pad controller
# padcontroller/systemd/install.sh --no-lamps # pass options to the pad controller
# padcontroller/systemd/install.sh --no-enable # install only; start it with
# # systemctl --user start padcontroller
# padcontroller/systemd/install.sh --uninstall
+37
View File
@@ -28,5 +28,42 @@ def set_lamps() -> None:
print(f"Lamps not set: {exc}", flush=True)
# Bank 1 pads 1 and 2 (notes 36 and 37), lit while their sound mode is on.
PUMP_RGB = (0, 255, 0)
THRESHOLD_RGB = (255, 120, 0)
def set_sound_lamps(pump: bool, threshold: bool) -> None:
"""Light the Pump and Threshold pads while their mode is on, without saving.
Writes only the pad's running copy, so the stored preset (bank 1 off) comes
back on a power cycle. Needs the USB Private port; raises when it is missing.
"""
sys.path.insert(0, str(ROOT))
sys.path.insert(0, str(ROOT / "scripts" / "pad"))
import pad_colours
import rtmidi
from padcontroller.device import transact
from padcontroller.preset import scale
from padcontroller.sysex import RAM, write_request
lamps = {0: PUMP_RGB if pump else (0, 0, 0), 1: THRESHOLD_RGB if threshold else (0, 0, 0)}
midiout = rtmidi.MidiOut(rtapi=rtmidi.API_LINUX_ALSA)
midiin = rtmidi.MidiIn(rtapi=rtmidi.API_LINUX_ALSA)
index = midiout.get_ports().index(pad_colours.private_port(midiout.get_ports()))
midiin.open_port(index)
midiin.ignore_types(sysex=False, timing=True, active_sense=True)
midiout.open_port(index)
try:
for base in pad_colours.bank_bases(1):
for pad, rgb in lamps.items():
address = RAM + base + pad * pad_colours.RECORD + pad_colours.RGB_AT
transact(midiout, midiin, write_request(address, bytes(scale(c) for c in rgb)))
finally:
for port in (midiout, midiin):
port.close_port()
port.delete()
if __name__ == "__main__":
set_lamps()
+138 -36
View File
@@ -8,6 +8,9 @@ from padcontroller.layer import PlayLayer # noqa: E402
PLAY_DOWN = [0xB0, 27, 127]
PLAY_UP = [0xB0, 27, 0]
PAUSE_DOWN = [0xB0, 28, 127]
PAUSE_UP = [0xB0, 28, 0]
SIDES_FULL = [[0xB0, 34, 127], [0xB0, 37, 127]]
class PlayLayerTest(unittest.TestCase):
@@ -46,44 +49,143 @@ class PlayLayerTest(unittest.TestCase):
def test_sound_pad_puts_the_submaster_back_to_full(self):
layer = PlayLayer()
self.assertEqual(layer.handle([0x99, 36, 100]), [[0x99, 36, 100], [0xB0, 100, 127]])
self.assertEqual(layer.handle([0x99, 36, 100]), [[0x99, 36, 100], *SIDES_FULL, [0xB0, 100, 127]])
self.assertEqual(layer.handle([0x89, 36, 0]), [[0x89, 36, 0], [0xB0, 100, 127]])
self.assertEqual(layer.handle([0x99, 37, 100]), [[0x99, 37, 100]])
def test_threshold_pad_holds_the_submaster_at_zero_while_on(self):
layer = PlayLayer()
self.assertEqual(layer.handle([0x99, 37, 100]), [[0x99, 37, 100], [0xB0, 100, 0]])
self.assertEqual(layer.handle([0x89, 37, 0]), [[0x89, 37, 0], [0xB0, 100, 0]])
self.assertEqual(layer.handle([0x99, 37, 100]), [[0x99, 37, 100], [0xB0, 100, 127]])
self.assertEqual(layer.handle([0x89, 37, 0]), [[0x89, 37, 0], [0xB0, 100, 127]])
def test_sound_pads_track_which_mode_is_on(self):
layer = PlayLayer()
layer.handle([0x99, 36, 100])
layer.handle([0x89, 36, 0])
self.assertEqual((layer.pump, layer.threshold), (True, False))
layer.handle([0x99, 36, 100])
layer.handle([0x99, 36, 0]) # note on at velocity 0 is a release
self.assertEqual((layer.pump, layer.threshold), (False, False))
def test_turning_threshold_on_switches_pump_off_first(self):
layer = PlayLayer()
layer.handle([0x99, 36, 100])
self.assertEqual(
layer.handle([0x99, 37, 100]),
[[0x99, 36, 127], [0x89, 36, 0], [0x99, 37, 100], *SIDES_FULL, [0xB0, 100, 0]],
)
self.assertEqual((layer.pump, layer.threshold), (False, True))
def test_turning_pump_on_switches_threshold_off_first(self):
layer = PlayLayer()
layer.handle([0x99, 37, 100])
self.assertEqual(
layer.handle([0x99, 36, 100]),
[[0x99, 37, 127], [0x89, 37, 0], [0x99, 36, 100], *SIDES_FULL, [0xB0, 100, 127]],
)
self.assertEqual((layer.pump, layer.threshold), (True, False))
def test_turning_a_mode_off_leaves_the_other_alone(self):
layer = PlayLayer()
layer.handle([0x99, 37, 100])
self.assertEqual(layer.handle([0x99, 37, 100]), [[0x99, 37, 100], [0xB0, 100, 127]])
self.assertEqual((layer.pump, layer.threshold), (False, False))
def test_peak_knob_goes_on_to_the_hits_submaster(self):
layer = PlayLayer()
self.assertEqual(layer.handle([0xB0, 35, 60]), [[0xB0, 35, 60]])
def test_side_knobs_pass_through_while_sound_is_off(self):
layer = PlayLayer()
self.assertEqual(layer.handle([0xB0, 34, 90]), [[0xB0, 34, 90]])
layer.handle([0x99, 37, 100]) # Threshold keeps them: the submaster holds the sides dark
self.assertEqual(layer.handle([0xB0, 37, 80]), [[0xB0, 37, 80]])
def test_pump_holds_the_sides_at_the_peak(self):
layer = PlayLayer()
layer.handle([0xB0, 34, 90])
layer.handle([0xB0, 35, 60])
self.assertEqual(layer.handle([0x99, 36, 100]),
[[0x99, 36, 100], [0xB0, 34, 60], [0xB0, 37, 60], [0xB0, 100, 127]])
self.assertEqual(layer.handle([0xB0, 35, 40]), [[0xB0, 35, 40], [0xB0, 34, 40], [0xB0, 37, 40]])
self.assertEqual(layer.handle([0xB0, 37, 100]), []) # kept for later
def test_pump_off_puts_the_side_knobs_back(self):
layer = PlayLayer()
layer.handle([0xB0, 34, 90])
layer.handle([0xB0, 35, 60])
layer.handle([0x99, 36, 100])
layer.handle([0xB0, 37, 100])
self.assertEqual(layer.handle([0x99, 36, 100]),
[[0x99, 36, 100], [0xB0, 34, 90], [0xB0, 37, 100], [0xB0, 100, 127]])
def test_threshold_taking_over_from_pump_puts_the_side_knobs_back(self):
layer = PlayLayer()
layer.handle([0xB0, 34, 90])
layer.handle([0xB0, 35, 60])
layer.handle([0x99, 36, 100])
self.assertEqual(layer.handle([0x99, 37, 100]),
[[0x99, 36, 127], [0x89, 36, 0], [0x99, 37, 100],
[0xB0, 34, 90], [0xB0, 37, 127], [0xB0, 100, 0]])
def test_colours_remember_the_last_pad_in_each_set(self):
layer = PlayLayer()
layer.handle([0x99, 52, 100])
layer.handle([0x99, 55, 100])
layer.handle(PLAY_DOWN)
layer.handle([0x99, 61, 100]) # Colour 2 Blue, sent as 77
self.assertEqual(layer.colours, {1: (9, 55), 2: (9, 77)})
def test_pressing_the_lit_colour_again_turns_it_off(self):
layer = PlayLayer()
layer.handle([0x99, 52, 100])
layer.handle([0x89, 52, 0])
layer.handle([0x99, 52, 100])
self.assertEqual(layer.colours[1], None)
def test_reopen_presses_the_colours_again_and_clears_sound(self):
layer = PlayLayer()
layer.handle([0x99, 54, 100])
layer.handle(PLAY_DOWN)
layer.handle([0x99, 66, 100])
layer.handle(PLAY_UP)
layer.handle([0x99, 36, 100])
self.assertEqual(layer.reopen(), [[0x99, 54, 127], [0x89, 54, 0], [0x99, 82, 127], [0x89, 82, 0],
[0xB0, 100, 127]])
self.assertEqual((layer.pump, layer.threshold), (False, False))
self.assertEqual(layer.colours, {1: (9, 54), 2: (9, 82)}) # still on, for the next reopen
def test_pause_toggles_bank_1_to_the_movers(self):
layer = PlayLayer()
self.assertEqual(layer.handle(PAUSE_DOWN), [])
self.assertEqual(layer.handle(PAUSE_UP), [])
self.assertEqual(layer.handle([0x99, 40, 100]), [[0x99, 88, 100]])
self.assertEqual(layer.handle([0x99, 51, 100]), [[0x99, 99, 100]])
self.assertEqual(layer.handle([0x99, 52, 100]), [[0x99, 52, 100]])
layer.handle(PAUSE_DOWN)
layer.handle(PAUSE_UP)
self.assertEqual(layer.handle([0x99, 44, 100]), [[0x99, 44, 100]])
def test_sound_pads_do_nothing_on_the_movers_layer(self):
layer = PlayLayer()
layer.handle(PAUSE_DOWN)
self.assertEqual(layer.handle([0x99, 36, 100]), [[0x99, 84, 100]])
self.assertEqual(layer.handle([0x89, 36, 0]), [[0x89, 84, 0]])
self.assertEqual(layer.handle([0x99, 37, 100]), [[0x99, 85, 100]])
self.assertEqual(layer.handle([0x89, 37, 0]), [[0x89, 85, 0]])
self.assertEqual((layer.pump, layer.threshold), (False, False))
def test_bank_1_release_matches_its_press_across_pause(self):
layer = PlayLayer()
layer.handle(PAUSE_DOWN)
layer.handle([0x99, 48, 100])
layer.handle(PAUSE_DOWN)
self.assertEqual(layer.handle([0x89, 48, 0]), [[0x89, 96, 0]])
def test_reopen_with_no_colours_only_resets_the_submaster(self):
self.assertEqual(PlayLayer().reopen(), [[0xB0, 100, 127]])
if __name__ == "__main__":
unittest.main()
class LockedKnobsTest(unittest.TestCase):
def test_knobs_are_dropped_until_custom_is_pressed(self):
layer = PlayLayer(lock_knobs=True)
self.assertEqual(layer.handle([0xB0, 31, 64]), [])
layer.handle([0x99, 67, 100])
self.assertEqual(layer.handle([0xB0, 31, 64]), [[0xB0, 31, 64]])
self.assertEqual(layer.handle([0xB0, 36, 64]), [])
def test_another_pad_locks_them_again(self):
layer = PlayLayer(lock_knobs=True)
layer.handle([0x99, 67, 100])
layer.handle([0x99, 60, 100])
self.assertEqual(layer.handle([0xB0, 31, 64]), [])
def test_locking_sends_the_sliders_back_to_zero(self):
layer = PlayLayer(lock_knobs=True)
layer.handle([0x99, 67, 100])
sent = layer.handle([0x99, 60, 100])
self.assertEqual(sent[0], [0x99, 60, 100])
self.assertEqual(sent[1:], [[0xB0, 30 + n, 0] for n in range(5)])
self.assertEqual(layer.handle([0x99, 61, 100]), [[0x99, 61, 100]])
def test_play_layer_unlocks_the_second_set(self):
layer = PlayLayer(lock_knobs=True)
layer.handle(PLAY_DOWN)
layer.handle([0x99, 67, 100])
self.assertEqual(layer.handle([0xB0, 36, 64]), [[0xB0, 36, 64]])
self.assertEqual(layer.handle([0xB0, 31, 64]), [])
def test_other_knobs_and_unlocked_mode_are_untouched(self):
self.assertEqual(PlayLayer(lock_knobs=True).handle([0xB0, 40, 64]), [[0xB0, 40, 64]])
self.assertEqual(PlayLayer().handle([0xB0, 31, 64]), [[0xB0, 31, 64]])