receiver: no change to protocol; revert temporary color-index handling; radiate uses ticks_us timing; development: ensure dev.py upload workflow retained

- Add n4 parameter support to main.py ESP NOW receiver
- Implement segmented_movement pattern with configurable parameters:
  * n1: segment length (number of LEDs per segment)
  * n2: spacing between segments
  * n3: forward movement speed (positions per beat)
  * n4: backward movement speed (positions per beat)
- Pattern alternates between forward and backward movement each beat
- If only n3 or n4 is set, moves in that direction every beat
- Draws repeating segments with spacing across entire LED strip
- Add Pipfile script to run dev.py directly with arguments

8_BAR_SETUP.md

@@ -0,0 +1,71 @@
+# 8-LED Bar System Setup
+
+This system supports 8 LED bars working together, each with unique names "100" through "107".
+
+## Quick Setup
+
+### 1. Configure Each LED Bar
+Each LED bar needs a unique name. Run the configuration script on each bar:
+
+```bash
+python configure_bar.py
+```
+
+Then enter the bar name (100, 101, 102, etc.) when prompted.
+
+### 2. Update Bar Names (Optional)
+To change the bar names, edit `/home/jimmy/projects/lighting-controller/src/bar_config.py`:
+
+```python
+LED_BAR_NAMES = [
+    "100",  # Bar 1
+    "101",  # Bar 2
+    "102",  # Bar 3
+    "103",  # Bar 4
+    "104",  # Bar 5
+    "105",  # Bar 6
+    "106",  # Bar 7
+    "107",  # Bar 8
+]
+```
+
+### 3. Default Settings
+All bars use the same default settings defined in `bar_config.py`:
+
+```python
+DEFAULT_BAR_SETTINGS = {
+    "pattern": "pulse",
+    "delay": 100,
+    "colors": [(0, 255, 0)],  # Default green
+    "brightness": 100,
+    "num_leds": 200,
+    "n1": 10,
+    "n2": 10,
+    "n3": 1,
+    "n": 0,
+}
+```
+
+## How It Works
+
+1. **Lighting Controller** sends ESP-NOW messages to all bars simultaneously
+2. **Each LED Bar** listens for messages addressed to its unique name
+3. **All bars** receive the same pattern/color/brightness settings
+4. **Synchronized effects** across all 8 bars
+
+## Current Features
+
+- ✅ All bars show the same pattern simultaneously
+- ✅ Individual bar addressing (100-107)
+- ✅ Optimized JSON payloads with defaults deduplication
+- ✅ Easy configuration via `bar_config.py`
+- ✅ MIDI control for all bars
+- ✅ n3 step rate functionality
+
+## Future Enhancements
+
+- Sequential patterns (bar 1 → bar 2 → bar 3...)
+- Wave effects across bars
+- Individual bar control
+- Master/slave synchronization
+- Physical arrangement awareness

Pipfile

@@ -16,4 +16,4 @@ uvicorn = "*"
 python_version = "3.12"
 
 [scripts]
-dev = 'watchfiles "./dev.py /dev/ttyACM0 src reset follow"'
+dev = "./dev.py"

configure_bar.py

@@ -0,0 +1,58 @@
+#!/usr/bin/env python3
+"""
+LED Bar Configuration Script
+Updates the settings.json file for each LED bar with its unique name
+"""
+
+import json
+import os
+
+# LED Bar names/IDs
+LED_BAR_NAMES = ["100", "101", "102", "103", "104", "105", "106", "107"]
+
+def update_bar_settings(bar_name, settings_file="settings.json"):
+    """Update the settings.json file with the bar name"""
+    if not os.path.exists(settings_file):
+        print(f"Error: {settings_file} not found")
+        return False
+    
+    # Read current settings
+    with open(settings_file, 'r') as f:
+        settings = json.load(f)
+    
+    # Update the name
+    settings["name"] = bar_name
+    
+    # Write back to file
+    with open(settings_file, 'w') as f:
+        json.dump(settings, f, indent=4)
+    
+    print(f"Updated {settings_file} with name: {bar_name}")
+    return True
+
+def main():
+    print("LED Bar Configuration Script")
+    print("=" * 40)
+    print("Available bar names:", LED_BAR_NAMES)
+    print()
+    
+    while True:
+        print("Enter bar name to configure (or 'quit' to exit):")
+        bar_name = input("> ").strip()
+        
+        if bar_name.lower() == 'quit':
+            break
+        
+        if bar_name not in LED_BAR_NAMES:
+            print(f"Invalid bar name. Must be one of: {LED_BAR_NAMES}")
+            continue
+        
+        if update_bar_settings(bar_name):
+            print(f"Successfully configured LED bar as '{bar_name}'")
+        else:
+            print("Failed to update settings")
+        
+        print()
+
+if __name__ == "__main__":
+    main()

src/main.py

@@ -1,5 +1,4 @@
-import asyncio
-import aioespnow
+
 import patterns
 from settings import Settings
 from web import web
@@ -18,13 +17,19 @@ def main():
     settings = Settings()
     print(settings)
 
+    if settings.get("color_order", "rgb") == "rbg":
+        color_order = (1, 5, 3)
+    else:
+        color_order = (1, 3, 5)
     patterns = Patterns(settings["led_pin"], settings["num_leds"], selected="off")
 
     sta_if = network.WLAN(network.STA_IF)
     sta_if.active(True)
 
     e = espnow.ESPNow()
+    e.config(rxbuf=1024)
     e.active(True)
+    # Increase buffer size for 8-bar payloads (default 526 bytes might be too small)  # Set to 1KB to handle larger multi-bar payloads
 
     wdt = machine.WDT(timeout=10000)
     wdt.feed()
@@ -44,23 +49,39 @@ def main():
         if last_msg:
             try:
                 data = json.loads(last_msg)
+                print(data)
                 defaults = data.get("d", {})
                 bar = data.get(settings.get("name"), {})
                 
-                patterns.brightness = bar.get("brightness", defaults.get("brightness", patterns.brightness))
-                patterns.delay = bar.get("delay", defaults.get("delay", patterns.delay))
-                colors = bar.get("colors", defaults.get("colors", patterns.colors))
-                patterns.colors = [tuple(int(color[i:i+2], 16) for i in settings.color_order) for color in colors]
+                # Check message type
+                message_type = defaults.get("t", "b")  # Default to beat if not specified
+                
+                # Always update parameters from message
+                patterns.brightness = bar.get("br", defaults.get("br", patterns.brightness))
+                patterns.delay = bar.get("dl", defaults.get("dl", patterns.delay))
+                patterns.colors = bar.get("cl", defaults.get("cl", patterns.colors))
                 patterns.n1 = bar.get("n1", defaults.get("n1", patterns.n1))
                 patterns.n2 = bar.get("n2", defaults.get("n2", patterns.n2))
-                patterns.step = bar.get("pattern_step", defaults.get("step", patterns.step))
+                patterns.n3 = bar.get("n3", defaults.get("n3", patterns.n3))
+                patterns.n4 = bar.get("n4", defaults.get("n4", patterns.n4))
+                patterns.step = bar.get("s", defaults.get("s", patterns.step))
                 
-                selected_pattern = bar.get("pattern", defaults.get("pattern", "off"))
+                # Print received parameters
+                print(f"Params: br={patterns.brightness}, dl={patterns.delay}, n1={patterns.n1}, n2={patterns.n2}, n3={patterns.n3}, n4={patterns.n4}, step={patterns.step}")
+                
+                # Only execute pattern if it's a beat message
+                if message_type == "b":  # Beat message
+                    selected_pattern = bar.get("pt", defaults.get("pt", "off"))
                     if selected_pattern in patterns.patterns:
-                    # Run the selected pattern ONCE in response to this message. Do not auto-tick elsewhere.
+                        # Run the selected pattern ONCE in response to this beat message
                         patterns.patterns[selected_pattern]()
                     else:
                         print(f"Pattern {selected_pattern} not found")
+                elif message_type == "u":  # Update message
+                    # Just update parameters, don't execute pattern
+                    print(f"Parameters updated: brightness={patterns.brightness}, delay={patterns.delay}")
+                else:
+                    print(f"Unknown message type: {message_type}")
             except Exception as ex:
                 print(f"Failed to load espnow data {last_msg}: {ex}")
                 continue

src/patterns.py

@@ -12,8 +12,12 @@ class Patterns(PatternBase): # Inherit from PatternBase
         self.off_width = 2 # Default off width (so total segment is 3, matching original behavior)
         self.n1 = 0 # Default start of fill range
         self.n2 = self.num_leds - 1 # Default end of fill range
+        self.n3 = 1 # Default step factor
+        self.n4 = 0
         self.oneshot = False # New: One-shot flag for patterns like fill_range
         self.patterns = {
+            "on": self.on,
+            "off": self.off,
             "flicker": self.flicker,
             "fill_range": self.fill_range,
             "n_chase": self.n_chase,
@@ -22,21 +26,47 @@ class Patterns(PatternBase): # Inherit from PatternBase
             "rainbow": self.rainbow,
             "specto": self.specto,
             "radiate": self.radiate,
+            "segmented_movement": self.segmented_movement,
+            # Shortened pattern names for optimized JSON payloads
+            "o": self.off,
+            "f": self.flicker,
+            "fr": self.fill_range,
+            "nc": self.n_chase,
+            "a": self.alternating,
+            "p": self.pulse,
+            "r": self.rainbow,
+            "s": self.specto,
+            "rd": self.radiate,
+            "sm": self.segmented_movement,
         }    
         self.step = 0
 
+    def on(self):
+        """Turn on all LEDs with current color"""
+        self.fill(self.apply_brightness(self.colors[0]))
+        self.n.write()
+        return self.delay
+
+    def off(self):
+        """Turn off all LEDs"""
+        self.fill((0, 0, 0))
+        self.n.write()
+        return self.delay
+
     def flicker(self):
         current_time = utime.ticks_ms()
         base_color = self.colors[0]
-        # Increase the range for flicker_brightness_offset
-        # Changed from self.brightness // 4 to self.brightness // 2 (or even self.brightness for max intensity)
+        # Use fixed minimum brightness of 10, flicker between 10 and full brightness
+        # Use n3 as step rate multiplier to control how fast patterns step
+        min_brightness = 10
+        step_rate = max(1, int(self.n3))
         flicker_brightness_offset = random.randint(-int(self.brightness // 1.5), int(self.brightness // 1.5))
-        flicker_brightness = max(0, min(255, self.brightness + flicker_brightness_offset))
+        flicker_brightness = max(min_brightness, min(255, self.brightness + flicker_brightness_offset))
 
         flicker_color = self.apply_brightness(base_color, brightness_override=flicker_brightness)
         self.fill(flicker_color)
         self.last_update = current_time
-        return max(1, int(self.delay // 5))
+        return max(1, int(self.delay // (5 * step_rate)))
 
     def fill_range(self):
         """
@@ -61,6 +91,7 @@ class Patterns(PatternBase): # Inherit from PatternBase
         A theater chase pattern using n1 for on-width and n2 for off-width.
         """
         current_time = utime.ticks_ms()
+        step_rate = max(1, int(self.n3))
         segment_length = self.n1 + self.n2
         if segment_length == 0: # Avoid division by zero
             self.fill((0,0,0))
@@ -68,13 +99,19 @@ class Patterns(PatternBase): # Inherit from PatternBase
             self.last_update = current_time
             return self.delay
         
+        # Use controller's step for synchronization, but scale it for chasing
+        chase_step = (self.step * step_rate) % self.num_leds
+            
         for i in range(self.num_leds):
-            if (i + self.pattern_step) % segment_length < self.n1:
+            # Calculate position relative to the chase head
+            pos_from_head = (i - chase_step) % self.num_leds
+            if pos_from_head < self.n1:
                 self.n[i] = self.apply_brightness(self.colors[0])
             else:
                 self.n[i] = (0, 0, 0)
         self.n.write()
-        self.pattern_step = (self.pattern_step + 1) % segment_length
+        
+        # Don't update internal step - use controller's step for sync
         self.last_update = current_time
         return self.delay
 
@@ -108,8 +145,8 @@ class Patterns(PatternBase): # Inherit from PatternBase
                     self.n[i] = active_color
 
         self.n.write()
-        self.step = (self.step + 1) % 2
-        return self.delay
+        # Don't update step - use the step value sent from controller for synchronization
+        return max(1, int(self.delay // 2))
     
 
     def pulse(self):
@@ -166,11 +203,16 @@ class Patterns(PatternBase): # Inherit from PatternBase
                 pos -= 170
                 return (0, pos * 3, 255 - pos * 3)
 
+        step_rate = max(1, int(self.n3))
+        # Use controller's step for synchronization, scaled for rainbow cycling
+        rainbow_step = (self.step * step_rate) % 256
+        
         for i in range(self.num_leds):
-            rc_index = (i * 256 // max(1, self.num_leds)) + self.pattern_step
+            rc_index = (i * 256 // max(1, self.num_leds)) + rainbow_step
             self.n[i] = self.apply_brightness(wheel(rc_index & 255))
         self.n.write()
-        self.pattern_step = (self.pattern_step + 1) % 256
+        
+        # Don't update internal step - use controller's step for sync
         return max(1, int(self.delay // 5))
 
     def specto(self):
@@ -221,8 +263,8 @@ class Patterns(PatternBase): # Inherit from PatternBase
             if lit_total >= self.num_leds:
                 break
             # wait self.delay ms before next ring
-            start = utime.ticks_ms()
-            while utime.ticks_diff(utime.ticks_ms(), start) < self.delay:
+            start = utime.ticks_us()
+            while utime.ticks_diff(utime.ticks_us(), start) < self.delay:
                 pass
             radius += 1
 
@@ -237,8 +279,8 @@ class Patterns(PatternBase): # Inherit from PatternBase
                 if 0 <= right < self.num_leds:
                     self.n[right] = (0, 0, 0)
             self.n.write()
-            start = utime.ticks_ms()
-            while utime.ticks_diff(utime.ticks_ms(), start) < self.delay:
+            start = utime.ticks_us()
+            while utime.ticks_diff(utime.ticks_us(), start) < self.delay:
                 pass
 
         # ensure all LEDs are off at completion
@@ -247,6 +289,112 @@ class Patterns(PatternBase): # Inherit from PatternBase
         self.run = False
         return self.delay
 
+    def segmented_movement(self):
+        """
+        Segmented movement pattern that alternates forward and backward.
+        
+        Parameters:
+        n1: Number of LEDs per segment  
+        n2: Spacing between segments (currently unused)
+        n3: Forward movement steps per beat
+        n4: Backward movement steps per beat
+        
+        Movement: Alternates between moving forward n3 steps and backward n4 steps each beat.
+        """
+        try:
+            # Get parameters
+            segment_length = max(1, int(self.n1)) if hasattr(self, 'n1') else 3
+            segment_spacing = max(0, int(self.n2)) if hasattr(self, 'n2') else 2  
+            forward_step = max(0, int(self.n3)) if hasattr(self, 'n3') else 1
+            backward_step = max(0, int(self.n4)) if hasattr(self, 'n4') else 0
+            
+            # Initialize position tracking if not exists
+            if not hasattr(self, '_sm_position'):
+                self._sm_position = 0
+                self._sm_last_step = -1
+            
+            # Check if this is a new beat (step changed)
+            if self.step != self._sm_last_step:
+                # Alternate between forward and backward movement
+                if self.step % 2 == 0:
+                    # Even steps: move forward (if n3 > 0)
+                    if forward_step > 0:
+                        self._sm_position += forward_step
+                        direction = "FWD"
+                    elif backward_step > 0:
+                        # If no forward, still move backward
+                        self._sm_position -= backward_step
+                        direction = "BWD"
+                    else:
+                        direction = "NONE"
+                else:
+                    # Odd steps: move backward (if n4 > 0)
+                    if backward_step > 0:
+                        self._sm_position -= backward_step
+                        direction = "BWD"
+                    elif forward_step > 0:
+                        # If no backward, still move forward
+                        self._sm_position += forward_step
+                        direction = "FWD"
+                    else:
+                        direction = "NONE"
+                
+                # Wrap position around strip length
+                strip_length = self.num_leds + segment_length
+                self._sm_position = self._sm_position % strip_length
+                
+                # Update last step
+                self._sm_last_step = self.step
+                
+                # DEBUG: Print every beat
+                if self.step % 5 == 0:
+                    print(f"SM: step={self.step}, dir={direction}, n3={forward_step}, n4={backward_step}, pos={self._sm_position}")
+            
+            # Clear all LEDs
+            self.fill((0, 0, 0))
+            
+            # Get color
+            color = self.apply_brightness(self.colors[0])
+            
+            # Calculate segment width (segment + spacing)
+            segment_width = segment_length + segment_spacing
+            
+            # Draw multiple segments across the strip
+            if segment_width > 0:
+                base_position = int(self._sm_position) % segment_width
+                
+                # Draw segments starting from base_position
+                current_pos = base_position
+                while current_pos < self.num_leds:
+                    # Draw segment from current_pos to current_pos + segment_length
+                    segment_end = min(current_pos + segment_length, self.num_leds)
+                    for i in range(max(0, current_pos), segment_end):
+                        self.n[i] = color
+                    
+                    # Move to next segment position
+                    current_pos += segment_width
+                
+                # Handle wrap-around: draw segments that start before 0
+                wrap_position = base_position - segment_width
+                while wrap_position > -segment_length:
+                    if wrap_position < 0:
+                        # Partial segment at start
+                        segment_end = min(wrap_position + segment_length, self.num_leds)
+                        for i in range(0, segment_end):
+                            self.n[i] = color
+                    wrap_position -= segment_width
+            
+            self.n.write()
+            return self.delay
+            
+        except Exception as e:
+            # DEBUG: Print error
+            print(f"SM Error: {e}")
+            # If anything goes wrong, turn off LEDs and return
+            self.fill((0, 0, 0))
+            self.n.write()
+            return self.delay
+
 
 if __name__ == "__main__":
     import time 

src/settings.py

@@ -13,10 +13,10 @@ class Settings(dict):
         else: self.color_order = (1, 3, 5)
 
     def set_defaults(self):
-        self["led_pin"] = 4
-        self["num_leds"] = 100
+        self["led_pin"] = 10
+        self["num_leds"] = 119
         self["color_order"] = "rgb"
-        self["name"] = f"3"
+        self["name"] = f"104"
 
     def save(self):
         try: