Files
qlcplus/padcontroller/layer.py
T
jimmyandClaude Opus 5.5 d522b1a2cf Add sound-reactive cans, a strobe pad and side chases to the test show.
The Sound pad (bank 1 note 36) toggles a QLC+ Audio Triggers widget whose
volume bar drives a Sound submaster beside the can dimmers, so the cans'
brightness follows the music while the movers stay steady. padcontroller sends
CC 100 at full on every press and release of that pad, bypassing its CC
smoothing, so switching sound off always leaves the cans at full.

test.qxw also gains Chase forward/reverse, a double and an opposing zigzag
down the side cans (RGB matrices whose colour follows the Colour 2 pads), a
Strobe flash pad with the cans' strobe channel forced HTP, and the Dimmers
frame, forced-LTP side colours and dimmer-free colour scenes from parallel
sessions.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 17:03:27 +13:00

75 lines
2.9 KiB
Python
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
"""Hold Play to move the bank 2 pads up a layer.
The SMC-PAD sends CC 27 as 127 when Play goes down and 0 when it comes up.
While it is down, pad notes 52–67 go out as 68–83, so QLC+ can tell a
second set of buttons from the first. Play itself is not passed on.
With lock_knobs, knobs 1–5 (CC 30–34) drive colour 1's sliders and knobs 6–10
(CC 35–39) drive colour 2's, but only after the Custom pad (note 67, or 83
with Play held) has been pressed. Pressing any other bank 2 pad locks them
again, and its sliders are sent back to zero so their scenes stop.
Locked knob turns are dropped.
The Sound pad (note 36) toggles QLC+'s audio triggers, which pump the cans'
Sound submaster in the Dimmers frame. Every press and release also sends CC 100
at full, so switching sound off leaves the cans at full rather than wherever
the music left them.
"""
from __future__ import annotations
PLAY_CC = 27
FIRST_NOTE = 52
LAST_NOTE = 67
SHIFT = 16
CUSTOM_NOTE = 67
KNOB_FIRST_CC = 30
KNOBS_PER_LAYER = 5
SOUND_NOTE = 36
SUBMASTER_CC = 100
class PlayLayer:
def __init__(self, lock_knobs: bool = False) -> None:
self.lock_knobs = lock_knobs
self.unlocked: set[int] = set() # layers 0 and 1
self.held = False
# (channel, note as pressed) -> note sent, so a release matches its press
self.sent: dict[tuple[int, int], int] = {}
def handle(self, data: list[int]) -> list[list[int]]:
"""The messages to send on. Empty when the message is swallowed."""
status = data[0]
kind = status & 0xF0
channel = status & 0x0F
if kind == 0xB0 and len(data) >= 3 and data[1] == PLAY_CC:
self.held = data[2] > 0
return []
if kind == 0xB0 and len(data) >= 3 and self.lock_knobs:
index = data[1] - KNOB_FIRST_CC
if 0 <= index < 2 * KNOBS_PER_LAYER and index // KNOBS_PER_LAYER not in self.unlocked:
return []
if kind not in (0x80, 0x90) or len(data) < 3:
return [list(data)]
note = data[1]
key = (channel, note)
is_on = kind == 0x90 and data[2] > 0
extra: list[list[int]] = []
if is_on and FIRST_NOTE <= note <= LAST_NOTE:
layer = 1 if self.held else 0
if note == CUSTOM_NOTE:
self.unlocked.add(layer)
elif layer in self.unlocked:
self.unlocked.discard(layer)
first = KNOB_FIRST_CC + layer * KNOBS_PER_LAYER
extra = [[0xB0, first + n, 0] for n in range(KNOBS_PER_LAYER)]
if note == SOUND_NOTE:
# Again on release, after any spectrum frame QLC+ still had queued
extra = [[0xB0, SUBMASTER_CC, 127]]
if is_on:
out = note + SHIFT if self.held and FIRST_NOTE <= note <= LAST_NOTE else note
self.sent[key] = out
else:
out = self.sent.pop(key, note)
return [[status, out, *data[2:]], *extra]