jimmyandClaude Opus 5.5 d522b1a2cf Add sound-reactive cans, a strobe pad and side chases to the test show.
The Sound pad (bank 1 note 36) toggles a QLC+ Audio Triggers widget whose
volume bar drives a Sound submaster beside the can dimmers, so the cans'
brightness follows the music while the movers stay steady. padcontroller sends
CC 100 at full on every press and release of that pad, bypassing its CC
smoothing, so switching sound off always leaves the cans at full.

test.qxw also gains Chase forward/reverse, a double and an opposing zigzag
down the side cans (RGB matrices whose colour follows the Colour 2 pads), a
Strobe flash pad with the cans' strobe channel forced HTP, and the Dimmers
frame, forced-LTP side colours and dimmer-free colour scenes from parallel
sessions.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 17:03:27 +13:00
2026-08-31 08:58:55 +00:00

qlcplus

QLC+ show files, fixture definitions, and generators for the XCHC stage (8× beamZ BCC145 parcans + 2× Small Eye 7 movers).

Layout

fixtures/     Fixture definitions (.qxf) — install into QLC+ if needed
shows/        Workspaces to open in QLC+
  xchc.qxw      Main show (patterns + movers, unified VC)
  simple.qxw    Manual board: M1/M2 pads, shared + individual RGBW
  small_eye.qxw Movers-only figure-of-8 show
  archive/      Older scratch workspaces
scripts/      Launchers (pattern_studio.sh, flash_luxdmx_xiao.sh)
  pad/          SMC-PAD tools: lamps, MIDI patching, capture decoding
  shows/        Generators / patchers for the shows and Chataigne
  anim/         showfile animations to preview over Art-Net
stage/        Stage map (SVG, JSON, canvas)
tests/        Art-Net / fixture helpers used by scripts

Open in QLC+

  • Full show: shows/xchc.qxw
  • Simple RGBW + positions: shows/simple.qxw

Scripts

# Rebuild simple manual board
python3 scripts/shows/make_simple_vc.py

# Rewrite can/mover patterns from stage layout
python3 scripts/shows/integrate_u_patterns.py

# Unify Patterns + Movers into one Show frame
python3 scripts/shows/unify_vc.py

# Figure-of-8 (live Art-Net or write/merge workspace)
python3 scripts/shows/figure8_small_eye.py --write-qxw shows/small_eye.qxw

Fixtures / DMX

Fixture Mode Addresses
Small Eye 7 #1–#2 43ch 1–43, 45–87
BCC145 #1–#8 8ch 87–150 (starts 87, 95, …)

Copy .qxf files from fixtures/ into QLC+’s fixture library if the manufacturer/model is missing.

SMC-PAD pad controller

padcontroller.midi reads the SMC-PAD, smooths its knobs, applies the Play layer, and sends the result on a virtual MIDI port named padcontroller for QLC+. Run it by hand with .venv/bin/python -m padcontroller.midi, or install it as a systemd user service that starts at login and waits for the pad:

padcontroller/systemd/install.sh

Options after the command go to the pad controller (for example --lock-knobs). --no-enable installs it without starting it at login (start it with systemctl --user start padcontroller). --uninstall removes the service. Logs: journalctl --user -u padcontroller -f.

Stage simulator

python -m simulator listens for Art-Net on port 6454 and draws the rig at http://127.0.0.1:8765. The Stage drop-down on the page switches between the stage maps in stage/. No QLC+ show is needed: stage/map.json holds every address. --show <file.qxw> only fills in addresses a stage map leaves out and shows where that workspace sends Art-Net. It can run as a systemd user service the same way:

simulator/systemd/install.sh

Options after the command go to the simulator (for example --show shows/test.qxw). --no-enable installs it without starting it at login (start it with systemctl --user start simulator). --uninstall removes the service. Logs: journalctl --user -u simulator -f.

Chataigne

scripts/shows/make_chataigne.py turns a show spec into a Chataigne project, so the SMC-PAD can drive the same colour pads and sliders without QLC+.

python3 scripts/shows/make_chataigne.py shows/test.show.json chataigne/test

Open chataigne/test/test.noisette. The Pad (MIDI) module reads the SMC-PAD directly (--pad picks the port: USB SINCO SMC-PAD-Master by default, or SMC-PAD Bluetooth). The script does the Play-layer shift that padcontroller/layer.py does for QLC+, with no knob smoothing, so the pad controller is not needed. Set the lamps with scripts/pad/pad_lamps.py. The Lights (DMX) module sends Art-Net to the node in the spec. The Preview module sends a copy to 127.0.0.1 for the simulator (--preview '' leaves it out). If it comes up on the wrong output, set DMX Type to Art-Net, the remote host, and an output universe of net 0, subnet 0, universe 0. The project also has a dashboard with the same buttons and sliders as the virtual console, coloured like it. Chataigne serves it on port 9999 for a phone or browser. Pads, knobs and dashboard stay in step. Edit chataigne/show.template.js for behaviour; the generated test.js is overwritten.

S
Description
No description provided
Readme AGPL-3.0
1.5 MiB
0 Stars 1 Watchers 0 Forks
Languages
Python 84.6%
JavaScript 9.6%
CSS 1.6%
Shell 1.5%
TypeScript 1.4%
Other 1.3%