Corners slammed the heads about 100° of pan every 0.6 s at full motor speed. It now runs at a quarter of the speed dial like the other shapes, about 1.4 s a corner, and its pad starts a collection with a Movers glide scene that sets the heads' Pan/Tilt Speed to 40 while it runs, so they ease into each corner. That channel is forced HTP on the movers, so it drops back to full speed when Corners stops instead of QLC+ holding it for everything after (scripts/shows/mover_corners_glide.py). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
qlcplus
QLC+ show files, fixture definitions, and generators for the XCHC stage (8× beamZ BCC145 parcans + 2× Small Eye 7 movers).
Layout
fixtures/ Fixture definitions (.qxf) — install into QLC+ if needed
shows/ Workspaces to open in QLC+
xchc.qxw Main show (patterns + movers, unified VC)
simple.qxw Manual board: M1/M2 pads, shared + individual RGBW
small_eye.qxw Movers-only figure-of-8 show
archive/ Older scratch workspaces
scripts/ Launchers (pattern_studio.sh, flash_luxdmx_xiao.sh)
pad/ SMC-PAD tools: lamps, MIDI patching, capture decoding
shows/ Generators / patchers for the shows and Chataigne
anim/ showfile animations to preview over Art-Net
stage/ Stage map (SVG, JSON, canvas)
tests/ Art-Net / fixture helpers used by scripts
Open in QLC+
- Full show:
shows/xchc.qxw - Simple RGBW + positions:
shows/simple.qxw
Scripts
# Rebuild simple manual board
python3 scripts/shows/make_simple_vc.py
# Rewrite can/mover patterns from stage layout
python3 scripts/shows/integrate_u_patterns.py
# Unify Patterns + Movers into one Show frame
python3 scripts/shows/unify_vc.py
# Figure-of-8 (live Art-Net or write/merge workspace)
python3 scripts/shows/figure8_small_eye.py --write-qxw shows/small_eye.qxw
Fixtures / DMX
| Fixture | Mode | Addresses |
|---|---|---|
| Small Eye 7 #1–#2 | 43ch | 1–43, 45–87 |
| BCC145 #1–#8 | 8ch | 87–150 (starts 87, 95, …) |
Copy .qxf files from fixtures/ into QLC+’s fixture library if the
manufacturer/model is missing.
SMC-PAD pad controller
padcontroller.midi reads the SMC-PAD, smooths its knobs, applies the Play
layer, and sends the result on a virtual MIDI port named padcontroller for
QLC+. Run it by hand with .venv/bin/python -m padcontroller.midi, or install
it as a systemd user service that starts at login and waits for the pad:
padcontroller/systemd/install.sh
Options after the command go to the pad controller (for example --no-lamps).
--no-enable installs it without starting it at login (start it with
systemctl --user start padcontroller). --uninstall removes the service. Logs: journalctl --user -u padcontroller -f.
Virtual pad
padcontroller.virtualpad presses pads and turns knobs without touching the
pad. It sends into the pad controller's input, so presses get the Play layer
and smoothing like the real thing. It refuses unless QLC+ last opened
shows/test.qxw (127.0.0.1 only); --force skips that.
.venv/bin/python -m padcontroller.virtualpad press 52 # Colour 1 Red
.venv/bin/python -m padcontroller.virtualpad press 52 --play # Play held: Colour 2 Red
.venv/bin/python -m padcontroller.virtualpad press --pad 1 # by pad number (shows/midi_map.json)
.venv/bin/python -m padcontroller.virtualpad cc 34 64
tests/test_e2e_pad.py uses it to press colour pads and check the simulator's
/api/state. It drives the live rig, so it only runs with PAD_E2E=1:
PAD_E2E=1 .venv/bin/python -m pytest tests/test_e2e_pad.py -v
The rest of the suite runs offline. Use pytest, since most tests are plain
def test_ functions that unittest doesn't find (pipenv install --dev
installs it):
.venv/bin/python -m pytest
Stage simulator
python -m simulator listens for Art-Net on port 6454 and draws the rig at
http://127.0.0.1:8765. The Stage drop-down on the page switches between the
stage maps in stage/. No QLC+ show is needed: stage/map.json holds every
address. --show <file.qxw> only fills in addresses a stage map leaves out and
shows where that workspace sends Art-Net. It can run as a systemd user service
the same way:
simulator/systemd/install.sh
Options after the command go to the simulator (for example --show shows/test.qxw).
--no-enable installs it without starting it at login (start it with
systemctl --user start simulator). --uninstall removes the service.
Logs: journalctl --user -u simulator -f.
Chataigne
scripts/shows/make_chataigne.py turns a show spec into a Chataigne project, so the
SMC-PAD can drive the same colour pads and sliders without QLC+.
python3 scripts/shows/make_chataigne.py shows/test.show.json chataigne/test
Open chataigne/test/test.noisette. The Pad (MIDI) module reads the SMC-PAD
directly (--pad picks the port: USB SINCO SMC-PAD-Master by default, or
SMC-PAD Bluetooth). The script does the Play-layer shift that padcontroller/layer.py does for
QLC+, with no knob smoothing, so the pad controller is not needed. Set the lamps with
scripts/pad/pad_lamps.py. The Lights (DMX) module sends Art-Net to the
node in the spec. The Preview module sends a copy to 127.0.0.1 for the simulator (--preview '' leaves it out). If it comes up on the wrong output, set DMX Type to Art-Net,
the remote host, and an output universe of net 0, subnet 0, universe 0.
The project also has a dashboard with the same buttons and sliders as the
virtual console, coloured like it. Chataigne serves it on port 9999 for a
phone or browser. Pads, knobs and dashboard stay in step.
Edit chataigne/show.template.js for behaviour; the generated test.js is
overwritten.