Commit Graph
22 Commits
Author SHA1 Message Date
jimmyandClaude Sonnet 5.5 3992744a1d Light pad bank 2 from page 7, and add factory reset and a pad bank toggle to the editor.
Bank 2's lamp colours come from preset page 7, not page 3, so pad_colours.py
writes there and the editor labels it Bank 2. The factory reset loads the
image MidiSuite uploads for its own reset, and the bank toggle writes the
global-block byte MidiSuite uses to switch banks.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 20:34:34 +13:00
jimmyandClaude Opus 5.5 63b3129cca Add an SMC-PAD preset editor that saves pad colours the way MidiSuite does.
The record layout and writes come from usbmon captures of MidiSuite:
a pad colour is one three-byte write to its preset address, which lights
the lamp straight away, and Save is the empty write that keeps it after
a power cycle. Pad records are channel, note, min and max velocity, RGB,
then Led. Tempo, swing, pad curve, and transpose come from the global
block, memory type 4. The factory image from MidiSuite's Reset is kept
as a test fixture, and scripts/decode_usbmon.py prints the SysEx in a
capture.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 19:30:34 +13:00
jimmyandCursor adca8e17a4 Put the XCHC colour scenes on the virtual console for the SMC-PAD.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 17:39:13 +13:00
jimmyandCursor 24f9ca300e Add a stage simulator that draws the rig from Art-Net.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 17:39:13 +13:00
jimmyandCursor 9b5f6b5bdd Add figure-8 and full-stage animations that can be previewed over Art-Net.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 17:39:13 +13:00
jimmyandCursor bb6e51cdc9 Build the simple console from a show spec instead of hand-written XML.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 17:39:13 +13:00
jimmyandCursor 4374ffb430 Add a show compiler so QLC+ workspaces can be described and tested.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 17:39:13 +13:00
jimmyandCursor fee1985e1a Record the XCHC hang, patch, and aiming on the stage map.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 17:39:13 +13:00
jimmyandCursor aa287b0adc Match the Small Eye mode to the lamp by swapping zoom and lens rotate.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 17:39:13 +13:00
jimmyandCursor 3b0920eeb2 Add a script that writes SMC-PAD pad colours and saves them on the controller.
The lamps ignore note messages, so the colours are stored in the preset and committed with the same empty write MidiSuite's Save button sends.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 17:38:20 +13:00
jimmyandCursor 12420bec93 Add Pattern Studio, SMC-PAD MIDI helpers, and the current venue workspaces.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-20 15:05:04 +13:00
jimmyandCursor 55a38478db Add a Chauvet Scorpion Dual RGB fixture definition.
The green Scorpion Dual profile uses a different channel order, so the RGB laser needs its own 10-channel map.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-19 16:16:17 +13:00
jimmyandCursor 054124470b Add twisted pad scenes, phased can chasers, and a venue wave that starts in all-colour-1.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-10 17:16:13 +13:00
jimmyandCursor 68f8a594d1 Add twisted show with SMC-PAD knobs for parcan colour and brightness.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-09 15:07:54 +13:00
jimmyandCursor b37af2234a Add an SMC-PAD MIDI listener that maps pads and knobs.
Learn pad and knob banks into shows/midi_map.json, then print pad and knob numbers with relative encoder steps.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-09 14:00:09 +13:00
jimmy 3bb38f6ddf Copy cabaret to default 2026-09-27 15:10:07 +13:00
jimmyandCursor 8f08d44188 Split cabaret figure-8s onto the floor and the wall, and make Speed a fader.
Floor 8 stays on the live ground aim; Wall 8 uses the Here–Out box. Pan/tilt speed is a slider so it matches Bright and Focus.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-09-10 00:47:18 +12:00
jimmyandCursor f069a8091b Add a cabaret QLC+ workspace for the cans and Small Eyes.
Generate the board from a script so looks, positions, and figure-8s stay in one place instead of being edited by hand in QLC+.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-09-10 00:35:28 +12:00
jimmyandCursor 5eb623d6af Organize the lighting project and ship the combined XCHC show.
Group workspaces, generators, stage map, and tests into clear folders, and add the unified cans+movers show plus a simple shared/individual RGBW control board.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-09-08 00:59:36 +12:00
jimmyandCursor c92094cc26 Add QLC+ fixture definitions for beamZ BCC145 and Small Eye 7 Mover.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-09-07 20:42:19 +12:00
jimmyandCursor 709dd0ea4f Add xchc workspace for eight BCC145 cans with patterns and RGBW control.
Includes chasers for color transitions, rainbow, odd/even fades, and a red test sequence, plus an All Dim master and per-can RGBW sliders.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-09-01 21:56:27 +12:00
jimmy a24d74bde0 Initial commit 2026-08-31 08:58:55 +00:00