Commit Graph
31 Commits
Author SHA1 Message Date
jimmyandClaude Opus 5.5 2219788904 Give the test show Dimmers knobs instead of the custom colour mixer, and add Amber.
The colour scenes leave the dimmers to Level sliders on knobs 15, 5, 7 and 8.
The Chataigne export carries Level sliders and their starting values.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 20:03:18 +13:00
jimmyandClaude Opus 5.5 11da656ee6 Toggle the pad's bank 1 to the movers with Pause, and add a Threshold sound mode.
Pause flips bank 1 between the cans (36-51) and the movers (84-99). Threshold
flashes the cans on bass hits and is exclusive with Sound, and knob 6 is the
sides' peak. The Sound and Threshold pads light while on, and the colour pads
that were on are pressed again when QLC+ reloads the show. --lock-knobs is gone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 20:03:18 +13:00
jimmyandClaude Opus 5.5 72c227b153 Merge dev into main: the pad controller, simulator, Chataigne export and test show.
Keep main's Temple of Techno show over dev's older copy from the first venue
workspaces commit.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 20:00:21 +13:00
jimmyandClaude Opus 5.5 86d87bf8cf Add a movers bank and Pan, Tilt, Focus and Rotate knobs to the test show.
Pause toggles bank 1 between the cans and the movers (scripts/shows/mover_bank.py).
Knobs 9-12 (CC 38-41) drive all four movers' pan, tilt, focus and lens
rotate, as in templeoftechno.qxw (scripts/shows/mover_position.py).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 19:56:38 +13:00
jimmyandClaude Opus 5.5 9742121144 Rename padeditor to padcontroller, with the MIDI intercept as padcontroller.midi and its virtual port as padcontroller.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 13:25:06 +13:00
jimmyandClaude Opus 5.5 1e09cb3825 Rename the MIDI intercept to padcontroller, as a module and as a service.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 12:33:43 +13:00
jimmyandClaude Opus 5.5 00de2595b6 Move the SMC-PAD MIDI intercept into padeditor and add a systemd user service with an installer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 12:06:31 +13:00
jimmyandClaude Opus 5.5 647cfa3a75 Group scripts into pad/, shows/ and anim/ folders.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 11:54:36 +13:00
jimmyandClaude Opus 5.5 5f593b973c Move the SMC-PAD packet captures into captures/.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 11:46:01 +13:00
jimmyandClaude Sonnet 5.5 729a315c7a Generate a Chataigne project from a show spec.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-22 11:44:19 +13:00
jimmyandClaude Sonnet 5.5 e413530658 Hold Play to move bank 2 up a layer in the SMC-PAD smoother.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-22 11:44:19 +13:00
jimmyandClaude Sonnet 5.5 6c060720ee Add two sets of colour scenes to the test show and light the pads from them.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-22 11:44:19 +13:00
jimmyandClaude Sonnet 5.5 3992744a1d Light pad bank 2 from page 7, and add factory reset and a pad bank toggle to the editor.
Bank 2's lamp colours come from preset page 7, not page 3, so pad_colours.py
writes there and the editor labels it Bank 2. The factory reset loads the
image MidiSuite uploads for its own reset, and the bank toggle writes the
global-block byte MidiSuite uses to switch banks.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 20:34:34 +13:00
jimmyandClaude Opus 5.5 63b3129cca Add an SMC-PAD preset editor that saves pad colours the way MidiSuite does.
The record layout and writes come from usbmon captures of MidiSuite:
a pad colour is one three-byte write to its preset address, which lights
the lamp straight away, and Save is the empty write that keeps it after
a power cycle. Pad records are channel, note, min and max velocity, RGB,
then Led. Tempo, swing, pad curve, and transpose come from the global
block, memory type 4. The factory image from MidiSuite's Reset is kept
as a test fixture, and scripts/decode_usbmon.py prints the SysEx in a
capture.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 19:30:34 +13:00
jimmyandCursor 9b5f6b5bdd Add figure-8 and full-stage animations that can be previewed over Art-Net.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 17:39:13 +13:00
jimmyandCursor bb6e51cdc9 Build the simple console from a show spec instead of hand-written XML.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 17:39:13 +13:00
jimmyandCursor 3b0920eeb2 Add a script that writes SMC-PAD pad colours and saves them on the controller.
The lamps ignore note messages, so the colours are stored in the preset and committed with the same empty write MidiSuite's Save button sends.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 17:38:20 +13:00
jimmyandCursor c9df537567 Set SMC-PAD colours over the pad's existing Bluetooth link.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 15:53:22 +13:00
jimmyandCursor 1b181640dd Start twisted in all-colour-1 and let pad 1 wander the movers.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 15:53:22 +13:00
jimmyandCursor 9f40933227 Drive the twisted cans and movers from the SMC-PAD over Art-Net.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 15:53:22 +13:00
jimmyandCursor dc05192a25 Keep each mover's pan and tilt when the shared SMC-PAD knobs turn.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 15:53:22 +13:00
jimmyandCursor 7317bcb486 Rebuild the cabaret virtual console for the current patch and mover looks.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 15:53:22 +13:00
jimmyandCursor 1a4e51e449 Aim the cabaret movers from a page and keep the named positions.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 15:53:22 +13:00
jimmyandCursor 6c5223eec5 Drive the two cabaret Small Eyes over Art-Net without QLC+.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 15:53:22 +13:00
jimmyandCursor 7ff1519abc Put Small Eye lens rotate on channel 6 and zoom on channel 7.
The glass only spins with focus at full, so the chase scenes and the channel test follow the real map.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 15:53:22 +13:00
jimmyandCursor 12420bec93 Add Pattern Studio, SMC-PAD MIDI helpers, and the current venue workspaces.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-20 15:05:04 +13:00
jimmyandCursor c72a8d6f26 Find MidiSuite's SMC-PAD save method without talking to the pad.
The Windows app builds the flash save when it runs, so the script reads that build and reports the method instead of guessing a packet.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-19 20:36:57 +13:00
jimmyandCursor b37af2234a Add an SMC-PAD MIDI listener that maps pads and knobs.
Learn pad and knob banks into shows/midi_map.json, then print pad and knob numbers with relative encoder steps.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-09 14:00:09 +13:00
jimmyandCursor 8f08d44188 Split cabaret figure-8s onto the floor and the wall, and make Speed a fader.
Floor 8 stays on the live ground aim; Wall 8 uses the Here–Out box. Pan/tilt speed is a slider so it matches Bright and Focus.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-09-10 00:47:18 +12:00
jimmyandCursor f069a8091b Add a cabaret QLC+ workspace for the cans and Small Eyes.
Generate the board from a script so looks, positions, and figure-8s stay in one place instead of being edited by hand in QLC+.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-09-10 00:35:28 +12:00
jimmyandCursor 5eb623d6af Organize the lighting project and ship the combined XCHC show.
Group workspaces, generators, stage map, and tests into clear folders, and add the unified cans+movers show plus a simple shared/individual RGBW control board.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-09-08 00:59:36 +12:00