Commit Graph
26 Commits
Author SHA1 Message Date
jimmyandClaude Opus 5.5 00c8c2d35d Add a Wander pad for the movers to the test show.
Pad 10 on the movers layer (note 93) toggles a relative EFX that drifts all
four movers around the Pan and Tilt knobs: a 24 s Lissajous of about ±30° pan
and ±10° tilt, each mover a quarter of the way further round, easing in over
2 s (scripts/shows/mover_wander.py).

QLC+ 4.12 leaves a relative EFX's last offset on the movers when it stops,
until the sliders under it change. So when Wander goes off, the pad
controller nudges the Pan and Tilt knobs a step and puts them back, 0.1 s
apart.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 00:49:33 +13:00
jimmyandClaude Opus 5.5 9c1ef6f2d4 Read the pad over Bluetooth first, and USB when it isn't paired.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 00:02:08 +13:00
jimmyandClaude Opus 5.5 fc8abf9c99 Set the movers' zeros and pan directions, swap M1/M2's patch, and model tilt in the simulator.
The front right mover is on DMX 1 and the front left on 45, so M1 and M2
swap addresses in the stage map and test.qxw. Measured on the rig, pan 0
faces forward on the front pair and into the middle on the back pair, back
at 85. M1 and M4 turn anticlockwise, so movers get a pan_reverse flag.

Tilt 127 now points straight down: the simulator draws a spot under the
head, and past 127 the beam flips behind the pan heading.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 22:54:14 +13:00
jimmyandClaude Opus 5.5 e96b31ab66 Re-aim cans 1, 2, 7 and 8 on the XCHC stage map.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 20:03:18 +13:00
jimmyandClaude Opus 5.5 2219788904 Give the test show Dimmers knobs instead of the custom colour mixer, and add Amber.
The colour scenes leave the dimmers to Level sliders on knobs 15, 5, 7 and 8.
The Chataigne export carries Level sliders and their starting values.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 20:03:18 +13:00
jimmyandClaude Opus 5.5 11da656ee6 Toggle the pad's bank 1 to the movers with Pause, and add a Threshold sound mode.
Pause flips bank 1 between the cans (36-51) and the movers (84-99). Threshold
flashes the cans on bass hits and is exclusive with Sound, and knob 6 is the
sides' peak. The Sound and Threshold pads light while on, and the colour pads
that were on are pressed again when QLC+ reloads the show. --lock-knobs is gone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 20:03:18 +13:00
jimmyandClaude Opus 5.5 72c227b153 Merge dev into main: the pad controller, simulator, Chataigne export and test show.
Keep main's Temple of Techno show over dev's older copy from the first venue
workspaces commit.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 20:00:21 +13:00
jimmyandClaude Opus 5.5 18f0ac2dc5 Add a virtual pad and an end-to-end test against the simulator, and run tests with pytest.
padcontroller.virtualpad presses pads and sets knobs through padcontroller-in,
refusing unless QLC+ last opened shows/test.qxw. tests/test_e2e_pad.py uses it
to check can and mover colours in the simulator's /api/state (PAD_E2E=1).

pytest is a dev package now, so the plain test functions unittest skipped run
too. test_small_eye.py is a rig tester, not a test, so pytest leaves it alone,
and the #14 direction assertion now matches the stage map (-179).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 17:58:04 +13:00
jimmyandClaude Opus 5.5 d522b1a2cf Add sound-reactive cans, a strobe pad and side chases to the test show.
The Sound pad (bank 1 note 36) toggles a QLC+ Audio Triggers widget whose
volume bar drives a Sound submaster beside the can dimmers, so the cans'
brightness follows the music while the movers stay steady. padcontroller sends
CC 100 at full on every press and release of that pad, bypassing its CC
smoothing, so switching sound off always leaves the cans at full.

test.qxw also gains Chase forward/reverse, a double and an opposing zigzag
down the side cans (RGB matrices whose colour follows the Colour 2 pads), a
Strobe flash pad with the cans' strobe channel forced HTP, and the Dimmers
frame, forced-LTP side colours and dimmer-free colour scenes from parallel
sessions.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 17:03:27 +13:00
jimmyandClaude Opus 5.5 8f8c69898a Read the pad over USB when it's plugged in, and keep its links to the pad and QLC+ up.
padcontroller.midi now follows the pad every 2 s: it reopens it after a
replug, moves to USB when that turns up, and re-links QLC+ to the virtual
port after a restart, so QLC+ can stay open. Only the chosen source is
subscribed, so a USB pad no longer gets Bluetooth input as well.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 14:34:05 +13:00
jimmyandClaude Opus 5.5 a295fefac0 Pick the simulator's stage map from a drop-down, and make the QLC+ show optional.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 14:05:42 +13:00
jimmyandClaude Opus 5.5 9742121144 Rename padeditor to padcontroller, with the MIDI intercept as padcontroller.midi and its virtual port as padcontroller.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 13:25:06 +13:00
jimmyandClaude Opus 5.5 00de2595b6 Move the SMC-PAD MIDI intercept into padeditor and add a systemd user service with an installer.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 12:06:31 +13:00
jimmyandClaude Opus 5.5 647cfa3a75 Group scripts into pad/, shows/ and anim/ folders.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 11:54:36 +13:00
jimmyandClaude Sonnet 5.5 729a315c7a Generate a Chataigne project from a show spec.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-22 11:44:19 +13:00
jimmyandClaude Sonnet 5.5 e413530658 Hold Play to move bank 2 up a layer in the SMC-PAD smoother.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-22 11:44:19 +13:00
jimmyandClaude Sonnet 5.5 3992744a1d Light pad bank 2 from page 7, and add factory reset and a pad bank toggle to the editor.
Bank 2's lamp colours come from preset page 7, not page 3, so pad_colours.py
writes there and the editor labels it Bank 2. The factory reset loads the
image MidiSuite uploads for its own reset, and the bank toggle writes the
global-block byte MidiSuite uses to switch banks.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-21 20:34:34 +13:00
jimmyandClaude Opus 5.5 63b3129cca Add an SMC-PAD preset editor that saves pad colours the way MidiSuite does.
The record layout and writes come from usbmon captures of MidiSuite:
a pad colour is one three-byte write to its preset address, which lights
the lamp straight away, and Save is the empty write that keeps it after
a power cycle. Pad records are channel, note, min and max velocity, RGB,
then Led. Tempo, swing, pad curve, and transpose come from the global
block, memory type 4. The factory image from MidiSuite's Reset is kept
as a test fixture, and scripts/decode_usbmon.py prints the SysEx in a
capture.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 19:30:34 +13:00
jimmyandCursor 24f9ca300e Add a stage simulator that draws the rig from Art-Net.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 17:39:13 +13:00
jimmyandCursor 4374ffb430 Add a show compiler so QLC+ workspaces can be described and tested.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 17:39:13 +13:00
jimmyandCursor 3b0920eeb2 Add a script that writes SMC-PAD pad colours and saves them on the controller.
The lamps ignore note messages, so the colours are stored in the preset and committed with the same empty write MidiSuite's Save button sends.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 17:38:20 +13:00
jimmyandCursor 10c39015b7 Preview open-mic colour on the rig and save it back to the pad.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 15:53:22 +13:00
jimmyandCursor c9df537567 Set SMC-PAD colours over the pad's existing Bluetooth link.
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 15:53:22 +13:00
jimmyandCursor 7ff1519abc Put Small Eye lens rotate on channel 6 and zoom on channel 7.
The glass only spins with focus at full, so the chase scenes and the channel test follow the real map.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-21 15:53:22 +13:00
jimmyandCursor c72a8d6f26 Find MidiSuite's SMC-PAD save method without talking to the pad.
The Windows app builds the flash save when it runs, so the script reads that build and reports the method instead of guessing a packet.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-10-19 20:36:57 +13:00
jimmyandCursor 5eb623d6af Organize the lighting project and ship the combined XCHC show.
Group workspaces, generators, stage map, and tests into clear folders, and add the unified cans+movers show plus a simple shared/individual RGBW control board.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-09-08 00:59:36 +12:00