Commit Graph
25 Commits
Author SHA1 Message Date
jimmyandClaude Sonnet 5.5 38162d4b89 feat: faster, correct preset editor; default presets use their own pattern
- Editing a preset can change its pattern (the dropdown was disabled).
- on, off and rainbow are built-in patterns and are always listed, so the
  editor no longer falls back to the first pattern (aurora) for them.
- The editor loads the pattern names once and only the selected pattern's
  definition (new GET /patterns/names and GET /patterns/<name>).
- A shared GET cache (fetch_cache.js) reuses profile, palette, zone, preset,
  group and pattern lookups; any write clears it and entries expire at 30 s.
- The seeded rainbow preset uses the rainbow pattern.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-11-10 01:46:11 +13:00
jimmyandClaude Sonnet 5.5 f85021d40d feat: Wi-Fi access point with a setting, password and boot button
The controller runs an AP (SSID = hostname, 192.168.5.1) next to ESP-NOW,
on by default. Network settings gain an on/off switch (ap_enabled) and an
optional WPA2 password (ap_password, 8-63 chars; empty is open). A button
on D7 (GPIO44) held at boot forces the AP on.

Wi-Fi now starts before Ethernet, and a missing W5500 no longer aborts the
boot: the web server and mDNS start anyway so the AP stays usable.

Network tuning found while testing over the AP: HTTP backlog 10 and 12 open
sockets (the default 5 dropped the 6th SYN, a 1 s stall on every page load),
larger TCP and Wi-Fi buffers, and IPv6 link-local addresses so mDNS answers
AAAA queries (browsers waited about a second for them).

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-11-10 01:46:05 +13:00
jimmyandClaude Opus 5.5 06953028ab feat(ui): driver settings and code updates over ESP-NOW
Settings gets a Driver tab (/settings/editor). It sends a driver its settings through PUT /devices/<id>, which now forwards name too, and runs the tools/driver_ota.py session from the browser. The firmware embeds the led-driver files and a manifest of their hashes, because crypto.subtle is unavailable over plain HTTP.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 23:51:41 +13:00
jimmyandClaude Opus 5.5 2f0c26e9b8 feat: default IP, reset reason in /status, seeded default group
With no DHCP answer in 15 seconds the controller takes 192.168.4.1/24, for a cable straight to a PC with a static IP. /status reports why the board last restarted. First boot also seeds a default group that the default zone plays to.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 22:25:22 +13:00
jimmyandClaude Opus 5.5 190c8bc982 feat: seed a default profile at first boot
A store with no profile gets a default one, using the seed POST /profiles already
creates plus a starter palette. db/ now holds those records instead of stored
data, and the unused db/presets/*.bin files are gone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 20:47:00 +13:00
jimmyandClaude Opus 5.5 a560a1a72b feat(ui): Edit mode Menu on desktop, device groups and Identify
Sequences, Settings and Audio only show in Edit mode. On wide screens the Edit
mode actions and Run mode move into the Menu.

Edit device gets a Groups checklist. The Devices list and Edit device group
show names without addresses, and every device in Edit device group, in the
group or in the list to add from, gets an Identify button.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 20:47:00 +13:00
jimmyandClaude Opus 5.5 b2cd242390 docs: describe the v2 controller's API, UI and tests
API.md now documents what the firmware serves: groups, combined
brightness, beat-driven sequences, import/export, /api/audio, patterns
over ESP-NOW, outputs, /ws, driver OTA, and how API calls become driver
messages and group commands. The user guide follows the current UI; the
in-app audio help describes the microphone instead of input devices.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:42:03 +13:00
jimmyandClaude Opus 5.5 32c0ecfa76 feat: update led-driver app files over ESP-NOW
tools/driver_ota.py (make ota-drivers) pushes the driver's .py files
through the controller, one file per POST /drivers/ota/file. Drivers
skip files they already have, and the rest are committed together.

- one target: acked unicast, two chunks in flight
- several targets: each file is broadcast once, then each driver is
  asked for its missing chunks and repaired by unicast
- rel: rel_send_seq, rel_wait and rel_send_wait, plus a callback for
  the drivers' 0x26 status replies
- commands are retried, because status replies are not acked
- broadcast chunks are paced 50 ms apart: faster broadcast left C3
  drivers unable to receive until reset
- bench results in docs/BENCH_TEST.md, endpoints in docs/API.md

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 23:45:38 +13:00
jimmyandClaude Opus 5.5 1c222771a5 refactor: move the v2 controller to the repository root
The ESP-IDF project, docs, tools, tests and web UI move from v2/ to the
root, and the Makefile, README, build scripts and test runner drop the
v2/ prefix.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 23:44:58 +13:00
jimmyandClaude Sonnet 5.5 71bd320661 feat(v2): move web UI into v2, remove legacy MicroPython app
Move the web assets and templates under v2/web, drop the old src/, lib/
and scripts, and update firmware, tools, docs and db files. Add the audio
page, LED test scripts and VPN autoconnect script.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-11-02 20:30:02 +13:00
jimmyandClaude Sonnet 5.5 7336c7fb22 docs: document engine, outputs, sequences, brightness and search; update spec
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:02:13 +13:00
jimmyandClaude Opus 5.5 a5a7fc575f feat(engine): Pi-side animation engine with protocol outputs and sequencer
Add src/engine, modelled on technicalkiwi/portal's player and sequence runner:

- Pixel generator: runs the unchanged led-driver patterns under CPython
  (utime shim + NeoPixel-like buffer) on a per-zone render thread and
  streams frames to pixel outputs, with keepalive for static frames.
- Output drivers: DDP, Art-Net (ArtDMX/ArtSync), sACN/E1.31, USB-DMX
  (Enttec Pro / Open DMX), plus an ESP32 preset output that reuses the
  existing preset + select delivery path. Registry in db/output.json,
  CRUD and test pattern at /outputs.
- Sequencer: timed preset chains per zone (portal step shape), deadline
  scheduling, loop/repeat, resume after restart; legacy sequence records
  are migrated. Zone play/stop, sequence and scene play/stop endpoints.
- CLI (python -m engine.cli), Outputs and Sequences modals, preset tiles
  drive pixel outputs, API/README docs, engine test suite.

ESP32 firmware is unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 13:24:14 +13:00
piandCursor 827eb97203 feat(settings): server global brightness and Wi-Fi driver resync
- Serve GET /settings as JSON by removing duplicate HTML route (use /settings/page for the standalone UI).

- Save global_brightness via PUT; broadcast to connected drivers; push saved level when outbound WS connects.

- Zones UI loads brightness from GET /settings only (no localStorage).

- Bump led-driver submodule for settings.save on brightness with save flag.

- Extend API doc and endpoint tests for global_brightness.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 22:15:30 +12:00
jimmy 96712dda88 feat(controller): migrate wifi drivers from tcp to websocket clients 2026-04-14 23:13:26 +12:00
pi 28b19b5219 docs: zones, transports, pattern ota, and submodule readmes
Made-with: Cursor
2026-04-12 00:13:54 +12:00
pi fd618d7714 feat(zones): rename tabs to zones across api, ui, and storage
Made-with: Cursor
2026-04-06 18:22:03 +12:00
pi f8eba0ee7e feat(api): tcp driver registry, identify, preset push delivery
- Track Wi-Fi TCP clients, liveness pings, disconnect broadcast, bind errors via gather\n- Device list/get include connected; POST identify with __identify preset\n- Presets push/send delivery helpers; bump led-driver hello type

Made-with: Cursor
2026-04-06 00:21:57 +12:00
pi e6b5bf2cf1 feat(devices): wifi tcp registry, device API/UI, tests; bump led-tool
Made-with: Cursor
2026-04-05 21:13:07 +12:00
pi 09a87b79d2 docs(ui): update help assets and regenerate help pdf 2026-03-26 00:40:40 +13:00
jimmy b7c45fd72c docs(ui): switch user-facing spelling to colour
Made-with: Cursor
2026-03-22 00:00:12 +13:00
jimmy ef968ebe39 docs: run/edit mode, profiles behavior, send presets
Made-with: Cursor
2026-03-21 23:51:00 +13:00
jimmy edadb40cb6 docs: rewrite API reference for current HTTP and driver flows
Made-with: Cursor
2026-03-21 23:15:44 +13:00
jimmy 81bf4dded5 docs: update msg.json example payload
Made-with: Cursor
2026-03-21 20:17:33 +13:00
jimmy 7e33f7db6a Add additional configuration and utility files
- Add install script and message configuration
- Add settings controller and templates
- Add ESP-NOW message utility
- Update API documentation
2026-01-27 13:05:09 +13:00
jimmy 9e2409430c Add documentation and utility modules
- Add API specification documentation
- Add system specification document
- Add UI mockups and documentation
- Add utility modules (wifi)
2026-01-11 21:34:18 +13:00