feat: Wi-Fi access point with a setting, password and boot button
The controller runs an AP (SSID = hostname, 192.168.5.1) next to ESP-NOW, on by default. Network settings gain an on/off switch (ap_enabled) and an optional WPA2 password (ap_password, 8-63 chars; empty is open). A button on D7 (GPIO44) held at boot forces the AP on. Wi-Fi now starts before Ethernet, and a missing W5500 no longer aborts the boot: the web server and mDNS start anyway so the AP stays usable. Network tuning found while testing over the AP: HTTP backlog 10 and 12 open sockets (the default 5 dropped the 6th SYN, a 1 s stall on every page load), larger TCP and Wi-Fi buffers, and IPv6 link-local addresses so mDNS answers AAAA queries (browsers waited about a second for them). Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
9989dd3062
commit
f85021d40d
11 files changed
+197
-22
No files matched your search
@@ -61,6 +61,8 @@ Keys with meaning on the controller (others are stored as they are):
|
||||
|
||||
| Key | Checked | Meaning |
|
||||
|-----|---------|---------|
|
||||
| `ap_enabled` | | Wi-Fi access point (open, SSID = hostname, `192.168.5.1`); default `true`; applies after a restart. Holding the D7 button at boot forces it on |
|
||||
| `ap_password` | | AP password, 8-63 characters (WPA2); empty (default) is an open network; applies after a restart |
|
||||
| `hostname` | | mDNS name (`<hostname>.local`, default `led-controller`); applies after a restart |
|
||||
| `static_ips` | | List of `{ip, netmask?, gw, dns?}` tried in order when the Ethernet link comes up; the first whose gateway answers ARP is used, else DHCP, else `192.168.4.1/24` for a direct PC cable. Applies after a restart |
|
||||
| `global_brightness` | integer 0–255 | Global factor of each driver's brightness (see Groups). Stored only: the UI pushes each driver its combined value |
|
||||
|
||||
+1
-1
@@ -106,7 +106,7 @@ The preset editor:
|
||||
|
||||
## Settings
|
||||
|
||||
**Settings** (Edit mode) holds the controller's name, the ESP-NOW channel (for reference: the controller's channel is set at build time), its mDNS **hostname** and the **static IPs** it tries on the Ethernet link (DHCP when none answers). With no DHCP server, as on a cable straight to a PC, the controller is at `192.168.4.1`; give the PC a static IP such as `192.168.4.2`. Network changes apply after a restart. **Driver** in Settings sends a driver its name, LED count, colour order, startup mode, maximum brightness and direction over ESP-NOW, with no cable. **Update code** there sends a driver, or all of them, the led-driver code built into the controller. `led-cli` on a computer edits a driver's whole `settings.json` over USB.
|
||||
**Settings** (Edit mode) holds the controller's name, the ESP-NOW channel (for reference: the controller's channel is set at build time), a **Wi-Fi access point** switch (on by default; network named after the hostname, with an optional WPA2 password, controller at `192.168.5.1`; holding the button on D7 at boot forces it on), its mDNS **hostname** and the **static IPs** it tries on the Ethernet link (DHCP when none answers). With no DHCP server, as on a cable straight to a PC, the controller is at `192.168.4.1`; give the PC a static IP such as `192.168.4.2`. Network changes apply after a restart. **Driver** in Settings sends a driver its name, LED count, colour order, startup mode, maximum brightness and direction over ESP-NOW, with no cable. **Update code** there sends a driver, or all of them, the led-driver code built into the controller. `led-cli` on a computer edits a driver's whole `settings.json` over USB.
|
||||
|
||||

|
||||
|
||||
|
||||
@@ -103,6 +103,23 @@ menu "Beat detection config"
|
||||
|
||||
endmenu
|
||||
|
||||
menu "AP config"
|
||||
|
||||
config AP_BUTTON_GPIO
|
||||
int "AP button GPIO (XIAO D7), -1 for none"
|
||||
default 44
|
||||
help
|
||||
Push button to ground. Held while the controller boots, it turns
|
||||
the Wi-Fi access point on even when the ap_enabled setting is off.
|
||||
GPIO44 is also UART0 RX; the button only pulls it low at boot.
|
||||
|
||||
config AP_HOLD_MS
|
||||
int "Hold time at boot (ms)"
|
||||
range 100 5000
|
||||
default 1000
|
||||
|
||||
endmenu
|
||||
|
||||
menu "ESP-NOW config"
|
||||
|
||||
config ESPNOW_CHANNEL
|
||||
|
||||
+13
@@ -348,6 +348,10 @@ void api_settings_defaults(void)
|
||||
api_set(st, "global_brightness", cJSON_CreateNumber(255));
|
||||
changed = true;
|
||||
}
|
||||
if (!cJSON_IsBool(cJSON_GetObjectItem(st, "ap_enabled"))) {
|
||||
api_set(st, "ap_enabled", cJSON_CreateBool(true));
|
||||
changed = true;
|
||||
}
|
||||
if (changed) {
|
||||
store_save("settings");
|
||||
}
|
||||
@@ -382,6 +386,15 @@ static esp_err_t put_settings(httpd_req_t *req)
|
||||
bad = INTS[i].err;
|
||||
}
|
||||
}
|
||||
const cJSON *ap = cJSON_GetObjectItem(body, "ap_enabled");
|
||||
if (ap && !cJSON_IsBool(ap)) {
|
||||
bad = "ap_enabled must be true or false";
|
||||
}
|
||||
const cJSON *pw = cJSON_GetObjectItem(body, "ap_password");
|
||||
if (!bad && pw && !cJSON_IsNull(pw) &&
|
||||
!(cJSON_IsString(pw) && (!pw->valuestring[0] || (strlen(pw->valuestring) >= 8 && strlen(pw->valuestring) <= 63)))) {
|
||||
bad = "ap_password must be empty (open) or 8 to 63 characters";
|
||||
}
|
||||
const cJSON *sw = cJSON_GetObjectItem(body, "sequence_switch_wait");
|
||||
if (!bad && sw && !cJSON_IsNull(sw) &&
|
||||
!(cJSON_IsString(sw) && (!strcasecmp(sw->valuestring, "beat") || !strcasecmp(sw->valuestring, "downbeat")))) {
|
||||
|
||||
+40
-2
@@ -210,12 +210,50 @@ void espnow_tx_stats(espnow_stats_t *out)
|
||||
*out = s_stats;
|
||||
}
|
||||
|
||||
esp_err_t espnow_tx_init(void)
|
||||
// A link-local IPv6 address on the AP lets the mDNS responder answer the AAAA half of a browser's
|
||||
// lookup; without it the browser waits about a second for an answer that never comes.
|
||||
static esp_netif_t *s_ap_netif;
|
||||
static void ap_event(void *arg, esp_event_base_t base, int32_t id, void *data)
|
||||
{
|
||||
if (s_ap_netif) {
|
||||
esp_netif_create_ip6_linklocal(s_ap_netif);
|
||||
}
|
||||
}
|
||||
|
||||
esp_err_t espnow_tx_init(const char *ap_ssid, const char *ap_password)
|
||||
{
|
||||
wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
|
||||
ESP_RETURN_ON_ERROR(esp_wifi_init(&cfg), TAG, "wifi init");
|
||||
ESP_RETURN_ON_ERROR(esp_wifi_set_storage(WIFI_STORAGE_RAM), TAG, "storage");
|
||||
ESP_RETURN_ON_ERROR(esp_wifi_set_mode(WIFI_MODE_STA), TAG, "mode");
|
||||
if (ap_ssid) {
|
||||
// Not the Ethernet fallback subnet (192.168.4.x)
|
||||
esp_netif_t *ap = esp_netif_create_default_wifi_ap();
|
||||
ESP_RETURN_ON_FALSE(ap, ESP_FAIL, TAG, "ap netif");
|
||||
s_ap_netif = ap;
|
||||
ESP_RETURN_ON_ERROR(esp_event_handler_register(WIFI_EVENT, WIFI_EVENT_AP_START, ap_event, NULL), TAG, "ap event");
|
||||
esp_netif_ip_info_t ip = { 0 };
|
||||
ip.ip.addr = ESP_IP4TOADDR(192, 168, 5, 1);
|
||||
ip.gw.addr = ip.ip.addr;
|
||||
ip.netmask.addr = ESP_IP4TOADDR(255, 255, 255, 0);
|
||||
esp_netif_dhcps_stop(ap);
|
||||
ESP_RETURN_ON_ERROR(esp_netif_set_ip_info(ap, &ip), TAG, "ap ip");
|
||||
esp_netif_dhcps_start(ap);
|
||||
wifi_config_t ac = { 0 };
|
||||
strlcpy((char *)ac.ap.ssid, ap_ssid, sizeof(ac.ap.ssid));
|
||||
ac.ap.ssid_len = strlen((char *)ac.ap.ssid);
|
||||
ac.ap.channel = CONFIG_ESPNOW_CHANNEL;
|
||||
if (ap_password && strlen(ap_password) >= 8) {
|
||||
strlcpy((char *)ac.ap.password, ap_password, sizeof(ac.ap.password));
|
||||
ac.ap.authmode = WIFI_AUTH_WPA2_PSK;
|
||||
} else {
|
||||
ac.ap.authmode = WIFI_AUTH_OPEN;
|
||||
}
|
||||
ac.ap.max_connection = 4;
|
||||
ESP_RETURN_ON_ERROR(esp_wifi_set_mode(WIFI_MODE_APSTA), TAG, "mode");
|
||||
ESP_RETURN_ON_ERROR(esp_wifi_set_config(WIFI_IF_AP, &ac), TAG, "ap config");
|
||||
} else {
|
||||
ESP_RETURN_ON_ERROR(esp_wifi_set_mode(WIFI_MODE_STA), TAG, "mode");
|
||||
}
|
||||
ESP_RETURN_ON_ERROR(esp_wifi_start(), TAG, "start");
|
||||
ESP_RETURN_ON_ERROR(esp_wifi_set_ps(WIFI_PS_NONE), TAG, "ps");
|
||||
ESP_RETURN_ON_ERROR(esp_wifi_set_max_tx_power(80), TAG, "tx power"); // 20 dBm
|
||||
|
||||
+4
-2
@@ -30,8 +30,10 @@ typedef struct {
|
||||
uint32_t sim_dropped; // frames discarded by the lossy-link test mode
|
||||
} espnow_stats_t;
|
||||
|
||||
// Start Wi-Fi (no AP) on the configured channel and ESP-NOW; hooks beat_set_callback
|
||||
esp_err_t espnow_tx_init(void);
|
||||
// Start Wi-Fi on the configured channel and ESP-NOW; hooks beat_set_callback.
|
||||
// ap_ssid non-NULL also runs an access point of that name (192.168.5.1): WPA2 with
|
||||
// ap_password (8-63 chars), open when it is NULL or empty.
|
||||
esp_err_t espnow_tx_init(const char *ap_ssid, const char *ap_password);
|
||||
|
||||
// Queue a bulk frame (<= 240 bytes). mac NULL broadcasts. Unicast frames are
|
||||
// retried; they never go out within the hold-off window after a beat.
|
||||
|
||||
+60
-16
@@ -44,6 +44,7 @@ static const char *TAG = "eth";
|
||||
|
||||
static httpd_handle_t s_server = NULL;
|
||||
static esp_netif_t *s_eth_netif = NULL;
|
||||
static bool s_ap_on = false; // Wi-Fi access point running
|
||||
|
||||
static const char *reset_reason(void)
|
||||
{
|
||||
@@ -75,19 +76,21 @@ static esp_err_t status_get_handler(httpd_req_t *req)
|
||||
mic_get_level(&level);
|
||||
espnow_tx_stats(&es);
|
||||
rel_stats(&rs);
|
||||
esp_netif_get_ip_info(s_eth_netif, &ip_info);
|
||||
esp_netif_get_mac(s_eth_netif, mac);
|
||||
if (s_eth_netif) { // NULL when the W5500 did not start
|
||||
esp_netif_get_ip_info(s_eth_netif, &ip_info);
|
||||
esp_netif_get_mac(s_eth_netif, mac);
|
||||
}
|
||||
snprintf(ip, sizeof(ip), IPSTR, IP2STR(&ip_info.ip));
|
||||
snprintf(macs, sizeof(macs), MACSTR, MAC2STR(mac));
|
||||
snprintf(buf, sizeof(buf),
|
||||
"{\"ip\":\"%s\",\"mac\":\"%s\",\"uptime_s\":%lld,\"reset_reason\":\"%s\",\"free_heap\":%lu,\"free_internal\":%lu,"
|
||||
"{\"ap\":%s,\"ip\":\"%s\",\"mac\":\"%s\",\"uptime_s\":%lld,\"reset_reason\":\"%s\",\"free_heap\":%lu,\"free_internal\":%lu,"
|
||||
"\"mic_rms_dbfs\":%.1f,\"mic_peak_dbfs\":%.1f,\"mic_spl_db\":%.1f,"
|
||||
"\"bpm\":%.1f,\"beat_confidence\":%.2f,\"beat_locked\":%s,\"beats\":%lu,\"onsets\":%lu,"
|
||||
"\"meter\":%d,\"bar_beat\":%d,\"bar_sure\":%s,\"downbeats\":%lu,"
|
||||
"\"espnow\":{\"beats_sent\":%lu,\"beat_send_fail\":%lu,\"bulk_sent\":%lu,"
|
||||
"\"bulk_retries\":%lu,\"bulk_failed\":%lu,\"sim_dropped\":%lu},"
|
||||
"\"link\":{\"ver\":%u,\"acked\":%lu,\"ack_timeouts\":%lu,\"retransmits\":%lu,\"resyncs\":%lu,\"digests\":%lu}}",
|
||||
ip, macs, (long long)(esp_timer_get_time() / 1000000), reset_reason(), (unsigned long)esp_get_free_heap_size(),
|
||||
s_ap_on ? "true" : "false", ip, macs, (long long)(esp_timer_get_time() / 1000000), reset_reason(), (unsigned long)esp_get_free_heap_size(),
|
||||
(unsigned long)heap_caps_get_free_size(MALLOC_CAP_INTERNAL), level.rms_dbfs, level.peak_dbfs, level.spl_db,
|
||||
bi.bpm, bi.confidence, bi.locked ? "true" : "false", (unsigned long)bi.beat_count,
|
||||
(unsigned long)bi.onset_count, bi.meter, bi.bar_beat, bi.bar_sure ? "true" : "false",
|
||||
@@ -107,6 +110,34 @@ static esp_err_t status_get_handler(httpd_req_t *req)
|
||||
#define DEFAULT_NETMASK ESP_IP4TOADDR(255, 255, 255, 0)
|
||||
#define DHCP_WAIT_S 15
|
||||
|
||||
// Boolean setting; def when missing or not a boolean
|
||||
static bool settings_bool(const char *key, bool def)
|
||||
{
|
||||
cJSON *v = cJSON_GetObjectItem(store_settings(), key);
|
||||
return cJSON_IsBool(v) ? cJSON_IsTrue(v) : def;
|
||||
}
|
||||
|
||||
// AP button held (to ground) for AP_HOLD_MS from boot
|
||||
static bool ap_button_held(void)
|
||||
{
|
||||
#if CONFIG_AP_BUTTON_GPIO >= 0
|
||||
gpio_config_t io = { .pin_bit_mask = 1ULL << CONFIG_AP_BUTTON_GPIO, .mode = GPIO_MODE_INPUT,
|
||||
.pull_up_en = GPIO_PULLUP_ENABLE };
|
||||
if (gpio_config(&io) != ESP_OK) {
|
||||
return false;
|
||||
}
|
||||
for (int t = 0; t < CONFIG_AP_HOLD_MS; t += 10) {
|
||||
if (gpio_get_level(CONFIG_AP_BUTTON_GPIO)) {
|
||||
return false;
|
||||
}
|
||||
vTaskDelay(pdMS_TO_TICKS(10));
|
||||
}
|
||||
return true;
|
||||
#else
|
||||
return false;
|
||||
#endif
|
||||
}
|
||||
|
||||
static const char *settings_str(const char *key)
|
||||
{
|
||||
cJSON *v = cJSON_GetObjectItem(store_settings(), key);
|
||||
@@ -257,6 +288,8 @@ static void start_webserver(void)
|
||||
config.max_uri_handlers = 80;
|
||||
config.stack_size = 8192;
|
||||
config.lru_purge_enable = true;
|
||||
config.max_open_sockets = 12; // browsers open 6 connections at once
|
||||
config.backlog_conn = 10; // the default 5 drops the 6th SYN, a 1 s retry
|
||||
if (httpd_start(&s_server, &config) != ESP_OK) {
|
||||
ESP_LOGE(TAG, "HTTP server start failed");
|
||||
return;
|
||||
@@ -287,6 +320,7 @@ static void eth_event_handler(void *arg, esp_event_base_t event_base,
|
||||
esp_eth_ioctl(eth_handle, ETH_CMD_G_SPEED, &speed);
|
||||
esp_eth_ioctl(eth_handle, ETH_CMD_G_DUPLEX_MODE, &duplex);
|
||||
ESP_LOGI(TAG, "Ethernet Link Up, MAC " MACSTR, MAC2STR(mac));
|
||||
esp_netif_create_ip6_linklocal(s_eth_netif); // lets mDNS answer AAAA queries (see espnow_tx.c)
|
||||
xTaskCreate(link_up_task, "link_up", 4096, NULL, 5, NULL);
|
||||
ESP_LOGI(TAG, "%s Mbps %s Duplex",
|
||||
speed == ETH_SPEED_100M ? "100" : "10",
|
||||
@@ -407,21 +441,31 @@ void app_main(void)
|
||||
ESP_ERROR_CHECK(esp_netif_init());
|
||||
ESP_ERROR_CHECK(esp_event_loop_create_default());
|
||||
|
||||
esp_eth_handle_t eth_handle = NULL;
|
||||
ESP_ERROR_CHECK(w5500_init(ð_handle));
|
||||
|
||||
esp_netif_config_t netif_cfg = ESP_NETIF_DEFAULT_ETH();
|
||||
s_eth_netif = esp_netif_new(&netif_cfg);
|
||||
ESP_ERROR_CHECK(esp_netif_attach(s_eth_netif, esp_eth_new_netif_glue(eth_handle)));
|
||||
|
||||
// Wi-Fi (AP + ESP-NOW) comes up first so the AP is there even if Ethernet fails
|
||||
const char *host = settings_str("hostname");
|
||||
esp_netif_set_hostname(s_eth_netif, host ? host : DEFAULT_HOSTNAME);
|
||||
bool held = ap_button_held();
|
||||
s_ap_on = settings_bool("ap_enabled", true) || held;
|
||||
ESP_LOGI(TAG, "AP %s%s", s_ap_on ? "on" : "off", held ? " (button held)" : "");
|
||||
ESP_ERROR_CHECK(espnow_tx_init(s_ap_on ? (host ? host : DEFAULT_HOSTNAME) : NULL, settings_str("ap_password")));
|
||||
|
||||
ESP_ERROR_CHECK(esp_event_handler_register(ETH_EVENT, ESP_EVENT_ANY_ID, ð_event_handler, NULL));
|
||||
ESP_ERROR_CHECK(esp_event_handler_register(IP_EVENT, IP_EVENT_ETH_GOT_IP, &got_ip_event_handler, NULL));
|
||||
// Ethernet is optional: without it the web UI is still served over the AP
|
||||
esp_eth_handle_t eth_handle = NULL;
|
||||
if (w5500_init(ð_handle) == ESP_OK) {
|
||||
esp_netif_config_t netif_cfg = ESP_NETIF_DEFAULT_ETH();
|
||||
s_eth_netif = esp_netif_new(&netif_cfg);
|
||||
ESP_ERROR_CHECK(esp_netif_attach(s_eth_netif, esp_eth_new_netif_glue(eth_handle)));
|
||||
|
||||
ESP_ERROR_CHECK(esp_eth_start(eth_handle));
|
||||
ESP_ERROR_CHECK(espnow_tx_init());
|
||||
esp_netif_set_hostname(s_eth_netif, host ? host : DEFAULT_HOSTNAME);
|
||||
|
||||
ESP_ERROR_CHECK(esp_event_handler_register(ETH_EVENT, ESP_EVENT_ANY_ID, ð_event_handler, NULL));
|
||||
ESP_ERROR_CHECK(esp_event_handler_register(IP_EVENT, IP_EVENT_ETH_GOT_IP, &got_ip_event_handler, NULL));
|
||||
|
||||
ESP_ERROR_CHECK(esp_eth_start(eth_handle));
|
||||
} else {
|
||||
ESP_LOGE(TAG, "Ethernet unavailable, continuing without it%s", s_ap_on ? " (web UI on the AP)" : "");
|
||||
start_webserver();
|
||||
start_mdns();
|
||||
}
|
||||
ESP_ERROR_CHECK(rel_init());
|
||||
ESP_ERROR_CHECK(engine_init());
|
||||
ESP_ERROR_CHECK(mic_start());
|
||||
|
||||
@@ -22,3 +22,12 @@ CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE=y
|
||||
CONFIG_HTTPD_WS_SUPPORT=y
|
||||
CONFIG_HTTPD_WS_POST_HANDSHAKE_CB_SUPPORT=y
|
||||
CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=8192
|
||||
CONFIG_LWIP_TCP_SND_BUF_DEFAULT=16384
|
||||
CONFIG_LWIP_TCP_WND_DEFAULT=16384
|
||||
CONFIG_LWIP_TCP_RECVMBOX_SIZE=12
|
||||
CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM=16
|
||||
CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM=64
|
||||
CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM=64
|
||||
CONFIG_ESP_WIFI_TX_BA_WIN=16
|
||||
CONFIG_ESP_WIFI_RX_BA_WIN=16
|
||||
CONFIG_LWIP_MAX_SOCKETS=16
|
||||
+27
-1
@@ -98,6 +98,9 @@ document.addEventListener('DOMContentLoaded', () => {
|
||||
const hostInput = document.getElementById('hostname-input');
|
||||
if (hostInput && staticIpsList && data && typeof data === 'object') {
|
||||
hostInput.value = data.hostname || '';
|
||||
setApToggle(data.ap_enabled !== false);
|
||||
const apPw = document.getElementById('ap-password-input');
|
||||
if (apPw) apPw.value = data.ap_password || '';
|
||||
staticIpsList.innerHTML = '';
|
||||
(Array.isArray(data.static_ips) ? data.static_ips : []).forEach(addStaticIpRow);
|
||||
}
|
||||
@@ -106,6 +109,19 @@ document.addEventListener('DOMContentLoaded', () => {
|
||||
}
|
||||
}
|
||||
|
||||
const apToggle = document.getElementById('ap-enabled-toggle');
|
||||
function setApToggle(on) {
|
||||
if (apToggle) {
|
||||
apToggle.setAttribute('aria-pressed', on ? 'true' : 'false');
|
||||
apToggle.classList.toggle('is-on', on);
|
||||
}
|
||||
}
|
||||
if (apToggle) {
|
||||
apToggle.addEventListener('click', () => {
|
||||
setApToggle(apToggle.getAttribute('aria-pressed') !== 'true');
|
||||
});
|
||||
}
|
||||
|
||||
const staticIpsList = document.getElementById('static-ips-list');
|
||||
const STATIC_IP_FIELDS = [
|
||||
['ip', 'IP address', '192.168.1.50'],
|
||||
@@ -256,6 +272,11 @@ document.addEventListener('DOMContentLoaded', () => {
|
||||
showSettingsMessage('Hostname may only contain letters, digits and hyphens', 'error');
|
||||
return;
|
||||
}
|
||||
const apPassword = (document.getElementById('ap-password-input') || { value: '' }).value;
|
||||
if (apPassword && (apPassword.length < 8 || apPassword.length > 63)) {
|
||||
showSettingsMessage('Access point password must be 8 to 63 characters, or empty for open', 'error');
|
||||
return;
|
||||
}
|
||||
let staticIps;
|
||||
try {
|
||||
staticIps = readStaticIps();
|
||||
@@ -267,7 +288,12 @@ document.addEventListener('DOMContentLoaded', () => {
|
||||
const response = await fetch('/settings/settings', {
|
||||
method: 'PUT',
|
||||
headers: { 'Content-Type': 'application/json' },
|
||||
body: JSON.stringify({ hostname, static_ips: staticIps }),
|
||||
body: JSON.stringify({
|
||||
hostname,
|
||||
static_ips: staticIps,
|
||||
ap_password: apPassword,
|
||||
ap_enabled: !apToggle || apToggle.getAttribute('aria-pressed') === 'true',
|
||||
}),
|
||||
});
|
||||
const result = await response.json();
|
||||
if (response.ok) {
|
||||
|
||||
@@ -1282,6 +1282,16 @@ html.simulated-bpm-mode .seq-switch-toggle-wrap {
|
||||
background-color: #e8e4ff;
|
||||
}
|
||||
|
||||
.nav-slide-toggle-switch.is-on {
|
||||
background-color: #1b5e20;
|
||||
border-color: #4caf50;
|
||||
}
|
||||
|
||||
.nav-slide-toggle-switch.is-on .nav-slide-toggle-thumb {
|
||||
left: calc(100% - 1rem - 2px);
|
||||
background-color: #e8f5e9;
|
||||
}
|
||||
|
||||
.main-menu-dropdown .nav-slide-toggle-wrap--mobile {
|
||||
display: flex;
|
||||
justify-content: center;
|
||||
|
||||
@@ -1182,6 +1182,20 @@
|
||||
<input type="text" id="hostname-input" placeholder="led-controller" pattern="[A-Za-z0-9\-]+" maxlength="63">
|
||||
<small>The controller answers at <code>hostname.local</code>.</small>
|
||||
</div>
|
||||
<div class="form-group">
|
||||
<label for="ap-enabled-toggle">Wi-Fi access point</label>
|
||||
<div class="nav-slide-toggle-wrap">
|
||||
<button type="button" role="switch" class="nav-slide-toggle-switch" id="ap-enabled-toggle" aria-pressed="true" aria-label="Wi-Fi access point enabled">
|
||||
<span class="nav-slide-toggle-track" aria-hidden="true"><span class="nav-slide-toggle-thumb"></span></span>
|
||||
</button>
|
||||
</div>
|
||||
<small>Named after the hostname; the controller is at <code>192.168.5.1</code> on it. Holding the button on D7 while the controller boots turns it on even when this is off.</small>
|
||||
</div>
|
||||
<div class="form-group">
|
||||
<label for="ap-password-input">Access point password</label>
|
||||
<input type="text" id="ap-password-input" placeholder="open (no password)" minlength="8" maxlength="63" autocomplete="off">
|
||||
<small>8 to 63 characters (WPA2). Leave empty for an open network.</small>
|
||||
</div>
|
||||
<div class="form-group">
|
||||
<label>Static IPs</label>
|
||||
<small>Tried in order each time the Ethernet link comes up; the first whose gateway answers is used. If none does, or the list is empty, DHCP is used. With no DHCP server, as on a cable straight to a PC, the controller is at <code>192.168.4.1</code>; give the PC a static IP such as <code>192.168.4.2</code>.</small>
|
||||
|
||||
Reference in new issue
Block a user