Move the LED strip example to C++ and split the driver into a WS2812 class (ws2812.h/.cpp). The class takes the GPIO and LED count in its constructor and provides set(), fill(), write(), setBrightness() and a static hsv2rgb(). The RMT encoder is now internal to ws2812.cpp. Also adds a top-level Makefile wrapping idf.py for Linux, macOS and Windows, and a .gitignore for build output. Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
57 lines
2.4 KiB
Markdown
57 lines
2.4 KiB
Markdown
| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 | ESP32-S31 |
|
|
| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- | --------- |
|
|
# RMT Transmit Example -- LED Strip
|
|
|
|
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
|
|
|
Almost any waveform can be generated by RMT peripheral, as long as a proper encoder is implemented. The RMT encoder is used to encode user data (e.g. RGB pixels) into format that can be recognized by hardware.
|
|
|
|
This example shows how to drive an addressable LED strip [WS2812](https://cdn-shop.adafruit.com/datasheets/WS2812B.pdf) by implementing the encoder in [ws2812.cpp](main/ws2812.cpp).
|
|
|
|
## How to Use Example
|
|
|
|
### Hardware Required
|
|
|
|
* A development board with any supported Espressif SOC chip (see `Supported Targets` table above)
|
|
* A USB cable for Power supply and programming
|
|
* A WS2812 LED strip
|
|
|
|
Connection :
|
|
|
|
```
|
|
--- 5V
|
|
|
|
|
+
|
|
RMT_LED_STRIP_GPIO_NUM +------ +---|>| (WS2812 LED strip)
|
|
DI +
|
|
|
|
|
--- GND
|
|
```
|
|
|
|
The GPIO number used in this example can be changed according to your board, by the macro `RMT_LED_STRIP_GPIO_NUM` defined in the [source file](main/main.cpp). The number of LEDs can be changed as well by `EXAMPLE_LED_NUMBERS`.
|
|
|
|
### Build and Flash
|
|
|
|
Run `idf.py -p PORT flash monitor` to build, flash and monitor the project.
|
|
|
|
(To exit the serial monitor, type ``Ctrl-]``.)
|
|
|
|
See the [Getting Started Guide](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/index.html) for full steps to configure and use ESP-IDF to build projects.
|
|
|
|
## Console Output
|
|
|
|
```
|
|
I (302) cpu_start: Starting scheduler on PRO CPU.
|
|
I (0) cpu_start: Starting scheduler on APP CPU.
|
|
I (323) example: Create RMT TX channel
|
|
I (343) example: Install led strip encoder
|
|
I (353) example: Start LED rainbow chase
|
|
```
|
|
|
|
|
|
After you seeing this log, you should see a rainbow chasing demonstration pattern. To change the chasing speed, you can update the `EXAMPLE_CHASE_SPEED_MS` value in [source file](main/main.cpp).
|
|
|
|
## Troubleshooting
|
|
|
|
For any technical queries, please open an [issue] (https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.
|