Files
esp32-examples/led_strip
jimmyandClaude Haiku 5.5 d6cf56f105 Add WS2812 driver library and C++ LED strip example
Move the LED strip example to C++ and split the driver into a WS2812
class (ws2812.h/.cpp). The class takes the GPIO and LED count in its
constructor and provides set(), fill(), write(), setBrightness() and a
static hsv2rgb(). The RMT encoder is now internal to ws2812.cpp.

Also adds a top-level Makefile wrapping idf.py for Linux, macOS and
Windows, and a .gitignore for build output.

Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
2026-11-10 22:22:50 +13:00
..

Supported Targets ESP32 ESP32-C3 ESP32-C5 ESP32-C6 ESP32-H2 ESP32-H21 ESP32-H4 ESP32-P4 ESP32-S2 ESP32-S3 ESP32-S31

RMT Transmit Example -- LED Strip

(See the README.md file in the upper level 'examples' directory for more information about examples.)

Almost any waveform can be generated by RMT peripheral, as long as a proper encoder is implemented. The RMT encoder is used to encode user data (e.g. RGB pixels) into format that can be recognized by hardware.

This example shows how to drive an addressable LED strip WS2812 by implementing the encoder in ws2812.cpp.

How to Use Example

Hardware Required

  • A development board with any supported Espressif SOC chip (see Supported Targets table above)
  • A USB cable for Power supply and programming
  • A WS2812 LED strip

Connection :

                              --- 5V
                               |
                               +
RMT_LED_STRIP_GPIO_NUM +------ +---|>| (WS2812 LED strip)
                        DI     +
                               |
                              --- GND

The GPIO number used in this example can be changed according to your board, by the macro RMT_LED_STRIP_GPIO_NUM defined in the source file. The number of LEDs can be changed as well by EXAMPLE_LED_NUMBERS.

Build and Flash

Run idf.py -p PORT flash monitor to build, flash and monitor the project.

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Console Output

I (302) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
I (323) example: Create RMT TX channel
I (343) example: Install led strip encoder
I (353) example: Start LED rainbow chase

After you seeing this log, you should see a rainbow chasing demonstration pattern. To change the chasing speed, you can update the EXAMPLE_CHASE_SPEED_MS value in source file.

Troubleshooting

For any technical queries, please open an [issue] (https://github.com/espressif/esp-idf/issues) on GitHub. We will get back to you soon.