Added some config/init time options
This commit is contained in:
parent
22973b801b
commit
d154274100
|
@ -10,8 +10,8 @@
|
|||
#include <mrf24j.h>
|
||||
|
||||
const int pin_reset = 6;
|
||||
const int pin_cs = 10; // default CS pin on ATMEGA8
|
||||
const int pin_interrupt = 2; // default interrupt pin on ATMEGA8
|
||||
const int pin_cs = 10; // default CS pin on ATmega8/168/328
|
||||
const int pin_interrupt = 2; // default interrupt pin on ATmega8/168/328
|
||||
|
||||
Mrf24j mrf(pin_reset, pin_cs, pin_interrupt);
|
||||
|
||||
|
@ -27,11 +27,17 @@ void setup() {
|
|||
mrf.set_pan(0xcafe);
|
||||
// This is _our_ address
|
||||
mrf.address16_write(0x6001);
|
||||
|
||||
|
||||
// uncomment if you want to receive any packet on this channel
|
||||
//mrf.set_promiscuous(true);
|
||||
|
||||
attachInterrupt(0, interrupt_routine, CHANGE); // interrupt 0 equivalent to pin 2 on ATMEGA8
|
||||
// uncomment if you want to enable PA/LNA external control
|
||||
//mrf.set_palna(true);
|
||||
|
||||
// uncomment if you want to buffer all PHY Payload
|
||||
//mrf.set_bufferPHY(true);
|
||||
|
||||
attachInterrupt(0, interrupt_routine, CHANGE); // interrupt 0 equivalent to pin 2(INT0) on ATmega8/168/328
|
||||
last_time = millis();
|
||||
interrupts();
|
||||
}
|
||||
|
@ -53,7 +59,14 @@ void loop() {
|
|||
void handle_rx() {
|
||||
Serial.print("received a packet ");Serial.print(mrf.get_rxinfo()->frame_length, DEC);Serial.println(" bytes long");
|
||||
|
||||
Serial.println("Packet data:");
|
||||
if(mrf.get_bufferPHY()){
|
||||
Serial.println("Packet data (PHY Payload):");
|
||||
for (int i = 0; i < mrf.get_rxinfo()->frame_length; i++) {
|
||||
Serial.print(mrf.get_rxbuf()[i]);
|
||||
}
|
||||
}
|
||||
|
||||
Serial.println("\r\nASCII data (relevant data):");
|
||||
for (int i = 0; i < mrf.rx_datalength(); i++) {
|
||||
Serial.write(mrf.get_rxinfo()->rx_data[i]);
|
||||
}
|
||||
|
|
Loading…
Reference in New Issue