From d154274100e6bd7a7785f19de7a07d0f6a31dc84 Mon Sep 17 00:00:00 2001 From: Pkarc Date: Sat, 17 Dec 2011 14:38:21 -0500 Subject: [PATCH] Added some config/init time options --- examples/Basic_TwoWay/Basic_TwoWay.pde | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/examples/Basic_TwoWay/Basic_TwoWay.pde b/examples/Basic_TwoWay/Basic_TwoWay.pde index 03c39ac..7f7b52b 100644 --- a/examples/Basic_TwoWay/Basic_TwoWay.pde +++ b/examples/Basic_TwoWay/Basic_TwoWay.pde @@ -10,8 +10,8 @@ #include const int pin_reset = 6; -const int pin_cs = 10; // default CS pin on ATMEGA8 -const int pin_interrupt = 2; // default interrupt pin on ATMEGA8 +const int pin_cs = 10; // default CS pin on ATmega8/168/328 +const int pin_interrupt = 2; // default interrupt pin on ATmega8/168/328 Mrf24j mrf(pin_reset, pin_cs, pin_interrupt); @@ -27,11 +27,17 @@ void setup() { mrf.set_pan(0xcafe); // This is _our_ address mrf.address16_write(0x6001); - + // uncomment if you want to receive any packet on this channel //mrf.set_promiscuous(true); - attachInterrupt(0, interrupt_routine, CHANGE); // interrupt 0 equivalent to pin 2 on ATMEGA8 + // uncomment if you want to enable PA/LNA external control + //mrf.set_palna(true); + + // uncomment if you want to buffer all PHY Payload + //mrf.set_bufferPHY(true); + + attachInterrupt(0, interrupt_routine, CHANGE); // interrupt 0 equivalent to pin 2(INT0) on ATmega8/168/328 last_time = millis(); interrupts(); } @@ -53,7 +59,14 @@ void loop() { void handle_rx() { Serial.print("received a packet ");Serial.print(mrf.get_rxinfo()->frame_length, DEC);Serial.println(" bytes long"); - Serial.println("Packet data:"); + if(mrf.get_bufferPHY()){ + Serial.println("Packet data (PHY Payload):"); + for (int i = 0; i < mrf.get_rxinfo()->frame_length; i++) { + Serial.print(mrf.get_rxbuf()[i]); + } + } + + Serial.println("\r\nASCII data (relevant data):"); for (int i = 0; i < mrf.rx_datalength(); i++) { Serial.write(mrf.get_rxinfo()->rx_data[i]); }