the main data endpoints when being forced so by the USB; this can
happen when attaching the JTAGICE3 to a USB 1.1 connection
* jtag3.c (jtag3_initialize): When detecting a downgraded max
transfer size on the JTAGICE3 (presumably, due to being connected
to USB 1.1 only), bail out as its firmware cannot properly handle
this (by now)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1129 81a1dc3b-b13d-400b-aceb-764788c761c2
(USBDEV_BULK_EP_READ_STK600): new define values
* stk500v2.c (stk600_open): use the STK600 EP values,
as they are different from AVRISPmkII
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1126 81a1dc3b-b13d-400b-aceb-764788c761c2
* jtagmkII.c (jtagmkII_initialize): For Xmega devices, and
firmware >= 7.x, don't trigger a RESET, in order to work around a
firmware bug that appears to be present in at least firmware 7.24
for the Dragon.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1125 81a1dc3b-b13d-400b-aceb-764788c761c2
* avrpart.c: (Dito)
* avrpart.h: (Dito)
* lexer.l: (Dito)
* avrdude.conf.in: Add "ocdrev" key/value pairs, based
on the AS6 XML file information.
* jtag3.c: Use the ocdrev in the parameter block.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1124 81a1dc3b-b13d-400b-aceb-764788c761c2
* jtag3.h: (Dito.)
* jtag3_private.h: Add two new commands
* stk500v2.c: Implement the "MonCon disable" hack that
allows temporarily falling back to ISP when trying to
talk to a part that has debugWIRE enabled
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1123 81a1dc3b-b13d-400b-aceb-764788c761c2
* avrdude.conf.in: Add "jtag3isp" programmer
* jtag3.c: jtag3_setparm() is now public
* jtag3.h: (Dito)
* stk500v2_private.h: Command 0x1D is CMD_SPI_MULTI only
for STK500v2, AVRISPmkII, and JTAGICEmkII; for JTAGICE3,
it's CMD_SET_SCK now; also add CMD_GET_SCK
* avrpart.c (avr_get_output_index): New function
* avrpart.h: (Dito)
* stk500v2.c: Implement the pasthrough programmer glue logic
for JTAGICE3 in ISP mode
* stk500v2.h: (Dito)
* avrdude.1: Document the JTAGICE3 support.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1119 81a1dc3b-b13d-400b-aceb-764788c761c2
m->offset from addr, JTAGICE3 doesn't need it anymore (similar
to JTAGICEmkII with 7+ firmware)
* jtag3.c (jtag3_read_byte): Allow for full-page reads of
EEPROM also for Xmega and debugWIRE, allow for signature
read in debugWIRE
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1117 81a1dc3b-b13d-400b-aceb-764788c761c2
across during development
* jtag3.c: (Dito.)
* usb_libusb.c: Reduce timeouts from 100 to 10 s, still long
enough, but not getting cold feet when something goes wrong.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1116 81a1dc3b-b13d-400b-aceb-764788c761c2
* usbdevs.h: Add defines that mark an event in return
from usb_recv_frame().
* usb_libusb.c: (Dito.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1115 81a1dc3b-b13d-400b-aceb-764788c761c2
* avrdude.conf.in: Fix page sizes for all Xmega devices,
by cross-checking against Atmel Studio's device XML files
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1112 81a1dc3b-b13d-400b-aceb-764788c761c2
PDI and JTAG).
* jtagmkII.c (jtagmkII_set_xmega_params): Use "fuse1" rather
than "fuse0" memory space to fill in the NVM offset from, as
there is no "fuse0" on some Xmega devices.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1111 81a1dc3b-b13d-400b-aceb-764788c761c2
traces made by Knut Schwichtenberg, and by similarity to
JTAGICEmkII.
Still quite incomplete, just megaAVR/JTAG is done by now.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1109 81a1dc3b-b13d-400b-aceb-764788c761c2
bug #37727 Add support for LM3S811 dev board as a programmer
* lexer.l,config_gram.y: accepting inverted pins at pin lists
syntax: ~num or ~(num,num,...)
* par.c: par_set_many_bits is now usable with inverted pins
* avrftdi.c: fixed wrong index in ftdi_pin_name
* avrdude.conf.in: added programmer lm3s811
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1106 81a1dc3b-b13d-400b-aceb-764788c761c2
No signs are allowed as negative values do not make sense for current config values.
* buspirate.c: include own header file buspirate.h
* doc/.cvsignore: add programmers.texi to ignore list
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1105 81a1dc3b-b13d-400b-aceb-764788c761c2
$(builddir) for generated files, so "make distcheck"
works again.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1104 81a1dc3b-b13d-400b-aceb-764788c761c2
* ft245r.c: added semaphore workaround for MacOS X,
added pthread_testcancel in reader thread
* configure.ac: added check for TYPE_232H in libftdi (not in libftdi < 0.20)
* avrftdi.c: do not use TYPE_232H if not declared
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1101 81a1dc3b-b13d-400b-aceb-764788c761c2
-Error was a result of a mixup between 2232C/D and 2232H
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1099 81a1dc3b-b13d-400b-aceb-764788c761c2
Bugfixes:
-remove ftdi_usb_purge_buffers(), since it does not flush, but clear buffers
-fix bad polling in avrftdi_flash_write() where it was possible to poll a 0xff
value.
Maintenance:
-use #defines from libftdi for MPSSE commands where applicable
-reformat E() and E_VOID() macros
-remove TYPE_* macros
-clean up private structure (remove pin_inversion, type and ftype)
-adds ftdi_pin_name() to turn a (FTDI) pin number to a human readable string
-adds avrftdi_print to encapsulate "if(verbose > c) fprintf()"-idiom
-nicer / better understandable (I hope) output
-removes pin_limit() and adds a member in the private data structure.
TYPE_* macros can be removed; decision is made from (struct ftdi_context).type
-add_pin(s)() functions reworked. parameters are validated first, if everything
is alright, pin_value is modified. pin_inversion mask is not needed; use
PIN_INVERTED instead
-change set_pin(s)(), so that it gets the pin value used by avrdude (and not a
bit mask). This way, PIN_INVERTED is usable and pin_inversion is not needed.
Plus, the interface is consistent with the add_pin() signature. Also move
parameter validation to the start of the function. I also commented out the
warning, that a pin is not defined, because it is annoying.
-clean up avrftdi_open(): first parameter validation, then USB lookup, interface
initialization then pin setup
-avrftdi_eeprom_read/write() and avrftdi_flash_read/write(): convert to new
calling scheme, where every paged_* function is called once for every page
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1098 81a1dc3b-b13d-400b-aceb-764788c761c2
Renames pin_name() from avrpart.c to avr_pin_name() and adds a
(globally visible)declaration in avrpart.h
The function takes an integer argument from the pin-enum in pindefs.h and
converts it to a string. The returned string corresponds to the pin names used
in avrdude.conf.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1095 81a1dc3b-b13d-400b-aceb-764788c761c2
fix breakage introduced by the recent page handling reorg;
it used to cause an infinite loop
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1091 81a1dc3b-b13d-400b-aceb-764788c761c2
in memory type calculation for Xmega "boot" memory region.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1087 81a1dc3b-b13d-400b-aceb-764788c761c2
* main.c: after locating the part information, determine default
memtype for all update options that didn't have a memtype
specified; this is "application" for Xmega parts, and "flash" for
everything else.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1086 81a1dc3b-b13d-400b-aceb-764788c761c2
scanning the program header table, the offsets from a program
header entry must never be used directly when checking the bounds
of the current AVR memory region. Instead, they must always be
checked based on the corresponding section's entry. That way,
Xmega devices now properly take into account whether the segment
fits into any of the application/apptable/boot memory region.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1085 81a1dc3b-b13d-400b-aceb-764788c761c2
read device signature
* main.c: When reading the signature yields 0x000000 or 0xffffff,
retry (up to twice) after some progressive delay.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1084 81a1dc3b-b13d-400b-aceb-764788c761c2
ATxmega128D4): New devices. As Xmega D doesn't feature a fuse0
memory cell, move that one out from the generic .xmega part into
the individual Xmega A parts.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1083 81a1dc3b-b13d-400b-aceb-764788c761c2
* stk500.c (stk500_initialize): Insert dummy values for PAGEL and
BS2 if they are not present in the config file, in order to be able
to proceed with the stk500_set_extended_parms() anyway.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1082 81a1dc3b-b13d-400b-aceb-764788c761c2
* stk500v2.c: For the "flash" pseudo-memory of Xmega devices,
distinguish addresses between "application" and "boot" area.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1081 81a1dc3b-b13d-400b-aceb-764788c761c2
program header segment, subtract `low' from ph[n].p_paddr in order
to correct the magic section offsets for the AVR's non-flash
memory regions.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1080 81a1dc3b-b13d-400b-aceb-764788c761c2
Joerg Wunsch
Rene Liebscher
Hannes Weisbach