avrdude/NEWS

1502 lines
58 KiB
Plaintext
Raw Normal View History

$Id$
Approximate change log for AVRDUDE by version.
(For detailed changes, see the version control system logs.)
----------------------------------------------------------------------
Changes since version 7.0:
* Major changes compared to the previous version:
2022-12-21 19:14:50 +00:00
- Provide a new programmer -c urclock for bootloader urprotocol
2022-11-22 01:29:07 +00:00
+ Urclock fully supports vector bootloaders at no extra code size
+ Uprotocol
https://github.com/stefanrueger/urboot/blob/main/urprotocol.md
2022-12-21 19:14:50 +00:00
allows programming much shorter bootloaders with more features:
* Exports a pgm_write_page(sram, progmem) function that the
application can call at FLASHEND-4+1 to use flash as storage
2022-11-22 01:29:07 +00:00
* Supports EEPROM reads/writes
* Protects itself from overwriting
* Vector bootloaders: can protect the reset vector
* Offers Chip Erase function (quicker than uploading 0xff's)
+ Urclock when compiled with libreadline supports bootloaders in
terminal mode (preventing them from WDT timeout)
+ The -c urclock programmer provides a metadata interface that
allows unused flash to be used as storage
2022-12-21 19:14:50 +00:00
+ avrdude -c urclock is backward compatible with avrdude -c arduino
2022-11-22 01:29:07 +00:00
2022-12-21 19:14:50 +00:00
- Add TPI support for Microchip tools #1205
2022-12-14 00:27:13 +00:00
2022-12-21 19:14:50 +00:00
- Add C-strings, C characters and double to terminal write
2022-12-14 00:27:13 +00:00
2022-12-21 19:14:50 +00:00
- Provide write flash in the terminal (using a cache)
- Provide page erase in the terminal as pgerase
2022-12-28 07:58:33 +00:00
2022-12-27 14:43:27 +00:00
- Add support for NetBSD and OpenBSD to build.sh
2022-12-21 19:14:50 +00:00
* New devices supported: none
* New programmers supported:
2022-12-21 19:14:50 +00:00
- urclock = Urclock programmer for bootloaders using urprotocol
- xplainedmini_tpi = Atmel AVR XplainedMini in TPI mode
- xplainedpro_pdi = Atmel AVR XplainedPro in PDI mode
- atmelice_tpi = Atmel-ICE (ARM/AVR) in TPI mode
- powerdebugger_tpi = Atmel PowerDebugger (ARM/AVR) in TPI mode
- pickit4 = MPLAB(R) PICkit 4 in JTAG mode
- pickit4_tpi = MPLAB(R) PICkit 4 in TPI mode
- snap = MPLAB(R) SNAP in JTAG mode
- snap_tpi = MPLAB(R) SNAP in TPI mode
- arduino_gemma = Arduino Gemma bootloader disguised as USBtiny
- adafruit_gemma = Adafruit Trinket Gemma bootloader disguised as USBtiny
- digilent-hs2 = Digilient JTAG HS2 (MPSSE)
2022-12-27 14:43:27 +00:00
- tigard = Tigard interface board
2022-12-14 00:27:13 +00:00
* Issues fixed:
2022-06-10 18:38:54 +00:00
- Fix micronucleus bootloader to check for unresponsive USB
devices #945
- Fix src/CMakeLists.txt to honor CMAKE_INSTALL_LIBDIR #972
2022-10-05 22:21:52 +00:00
- [bug #43898] atmega644p remains stopped after JTAG
transaction #366
- Wrong timings for ATmega328PB and other parts in avrdude.conf
#976
- FT232R based programmer ATmega2560 Flash Reading Problem #995
also #474
- Enable avrdude to send full input file incl trailing 0xff
#936
- Portname default for linuxspi programmer not recognized #926
- JTAG1 unable to write fuse and lock bits #443
- Unknown option '-s' on command line (legacy) #1032
- STK500/arduino/xbee programmers fail EEPROM r/w for some
parts #967 also #421
- Design issue: jtag2updi is hardcoded to fail for parts with
has_pdi = yes #1037
- Option parse error: after -U flash:w:program_to_upload.hex,
subsequent -V ignored #441
- Automatic verification is designed to fail for stdin #1044
- Display correct number of bytes when input file has holes
#1005
- Cmake installs avrdude.1 in the wrong place on Linux #1064
- avr910 -qq prompt too verbose #1081
- avrftdi.c: paged write can fail at addr 0 #1073
- Permission denied accessing /sys/class/gpio/gpioX/direction
would leave pin exported #472 also #372
- Raspberry Pi sysfs bug workaround for linuxgpio driver #386
- Fix CMake avrdude.conf dependency to avrdude.conf.in #1035
- CMake infrastructure does not handle documentation #947
- New feature: ability to reset FLIPv2 targets #733
- Fix Extended address not sent with avr109/butterfly #360
and #454
- Enable AVR JTAG ICE mkI program EEPROM in terminal mode
#1054
- Make flash writes work in terminal mode #1020
- Add support for XMEGA specific AVR109 protocol extensions
used by XBoot #200
- jtag2updi can not write EEPROM in terminal mode #1116
- Make UPDI programmers less verbose during initialization
#1084
- Quell mode isn't handled systematically #1114
2022-10-23 22:33:56 +00:00
- Mixing the progress bar with warning messages #1136
- Inconsistent terminal output re stdout and stderr #1130
- Supress the warning for Microchip SNAP #1135
- ATtiny85 communication problem with default bitclock #1133
- [Regression] Optiboot for "modern AVRs" no longer works #1120
- Cannot access EEPROM on some bootloader/part combos #970
2022-11-25 23:35:37 +00:00
- -U writes sometimes more bytes to flash/memory than input
file has #1050
- debugWire using dragon_dw and jtag2dw not working #1168
- && echo OK does not work after -c urclock #1192
2022-11-27 19:12:19 +00:00
- Serial drain timeout needs calibrating for -c urclock #1193
2022-12-14 00:27:13 +00:00
- avrdude -U file.elf misses second and following suitable
sections in elf segements #1204
- Avrdude on macOS has problems with libedit #1173
- urclock support for optiboot_x and optiboot_dx #1200
- Terminal does not continue read/dump correctly #1201
2022-12-21 19:14:50 +00:00
- JTAG3 programmer info not available in ISP mode #1212
- Extra avrdude> prompt with -qqt in terminal mode #1214
- PICkit4 and SNAP serial numbers not read by Avrdude #1038
- Optiboot EEPROM support cannot be detected by avrdude #1224
- megaAVR JTAG programming doesn't work for SNAP and PICkit4
#1052
2022-12-31 16:14:49 +00:00
- urclock/FTDI communication issues #1245
2022-06-10 18:38:54 +00:00
* Pull requests:
2022-05-08 18:39:12 +00:00
- Fix .Dd macro in manpage #949
2022-05-30 05:01:22 +00:00
- fix M1 homebrew path #950
2022-06-10 18:38:54 +00:00
- CMake Enhancements #962
2022-06-19 17:56:56 +00:00
- Reduce programmer desc string length in avrdude.conf
to < 80 characters #1000
2022-06-26 20:58:25 +00:00
- Dragon JTAG fix #979
2022-06-26 21:00:32 +00:00
- adding support for all Linux baud rates v.2 #993
2022-06-28 20:53:24 +00:00
- Replace internal knowledge in jtag3.c by a public API #996
- JTAG3 UPDI EEPROM fix #1013
2022-06-28 21:46:06 +00:00
- Treat x bits in .conf SPI commands as 0 #943
2022-07-12 14:52:37 +00:00
- Fix avrftdi support for ATmega2560 et al #998
- Fix avrdude.conf timings for ATmega328PB and other parts #1001
- Fix PICKit2 ATmega2560 flash paged flash read #1023
- Fix ft245r paged read for ATmega2560 et al #1018
- Add option -A that supresses trailing 0xff optimisation
and automatically do so for -c arduino #936
2022-08-31 16:35:03 +00:00
- Fix linuxspi default port #933
2022-07-18 13:38:37 +00:00
- Add support for high-voltage UPDI im jtag3.c #1015
2022-10-05 22:21:52 +00:00
- Fix terminal write edge cases; add one read mode; add quell
command #1025
2022-08-31 16:35:03 +00:00
- Fix usbtiny read for parts with more than 64 kB flash #1029
- CMakeLists.txt: fix build without C++ #1016
2022-08-03 00:19:48 +00:00
- Provide file format I: Intel HEX with comments that ignores
checksum errors #1030
- Enable writing fuse and lock bits for AVR-JTAGICE #1031
- Ignore -s flag as safemode is no longer supported #1033
2022-08-31 16:35:03 +00:00
- Developer options to describe parts and
2022-08-03 00:19:48 +00:00
extend avrdude.conf syntax #1040
- Deprecate original STK500 v1 protocol in favour of optiboot
2022-08-31 16:35:03 +00:00
and Arduino as ISP #1046
2022-08-03 00:19:48 +00:00
- Add jtagmkii_updi programmer option #1048
2022-08-04 17:19:43 +00:00
- Enable stdin verification, display correct number of bytes
written/verified, check -U memory names against spelling
errors and exit but skip -U memory updates with known
memories that the part lacks #1053
- Handle invalid -U file format specifiers for input #1042
2022-08-14 23:56:38 +00:00
- Implement a dry run for -U updates before opening the
programmer #1056
- Implement -c <wildcard>/dev_options for printing avrdude.conf
show comments with -p*/s or -c*/s; Reduce -p */r raw output;
specifying the full memory name now always works; stop
listing programmers where id starts with dot #1059
- Fix logfile short option in man-page; fix install dir for man
page #1063
2022-08-23 16:23:47 +00:00
- Use const for programmer functions where useful; add second
argument for programmer enable interface function
void (*enable)(PROGRAMMER *pgm, const AVRPART *p) #1078
- Make avr910 programmer initialize() less verbose #1083
- Fix flash paged write for avrftdi.c #1074
2022-08-31 16:35:03 +00:00
- Fix 4 parts wrt to their interfaces in avrdude.conf; rewrite
avrdude.conf.in file from avrdude -c* -p* output; reformat
conditional programmers in avrdude.conf.in using -c*; fix
reset=dedicated|io; entries #1086
- Add prog_modes, a bitwise or of prgramming modes, to part and
programmer definitions; add to part definition
+ mcuid, a unique id in 0..2039 for 8-bit AVR
+ n_interrupts, the number of interrupts
+ n_page_erase, if set, the # of pages erased for NVM erase
implement a simple calculator in config_gram.y for numeric
values; set part prog_modes, mcuid, n_interrupts and
n_page_erase in avrdude.conf.in; add external intelligence
about AVRs avrintel.[ch] to the project and warn during
parsing if mcuid is incompatible with it #1091
2022-09-24 12:29:04 +00:00
- Fix permission denied error in linuxgpio programmer #917
- Add a programmer arduino_gemma for the Arduino Gemma
bootloader and another one, adafruit_gemma, for the Adafruit
Trinket Gemma bootloader in avrdude.conf; #1093
- Add digilent-hs2 programmer in avrdude.conf #1094
- Fix dependency chain between avrdude.conf.in and
avrdude.conf #1095
- Build docs with CMake #1096
- New feature so user can print all compatible parts for a
programmer using -p\? -c programmer and vice versa #1099
- Add extended parameter disable_no_cs for linuxspi programmer
#1100
2022-10-05 22:21:52 +00:00
- Fix avr109 extended address #1101
- Add support for Flip 2 reset on exit #1102
- Support for Power Debugger analog readings in terminal mode
#1105
- Provide cached byte-wise read/write API #1106
- AVR109: support for prodsig read and usersig read/write #1108
- Add missing AVR variants the original JTAG ICE supports #1109
- Improve help message in terminal and provide new command
pgerase #1113
2022-10-11 13:49:44 +00:00
- Fix pointer truncation for Windows x64 #1119
- Fix jtag3_page_erase for targets with UPDI #1112
- Fix writing of last word on DWORD TPI parts #1115
- Use byte-wise read/write when page size is 1 in terminal
cache #1121
- Suppress Teensy USB communication error message on reboot #1122
- Fix UPDI erase when target is locked #1125
- Review and overhaul AVRDUDE's messaging system #1126
2022-10-23 22:33:56 +00:00
- Look for ~/.config/avrdude/avrdude.rc then ~/.avrduderc #1131
- Revamp terminal output (progress bar, callback and
stdout/stderr) #1132
- Detect PICkit4 and SNAP in PIC mode #1138
- Mention -B in the error message #1139
- Support optiboot, optiboot_dx and optiboot_x bootloaders for
-c arduino #1140
- Always use paged access for programmers that serve
bootloaders #1141
- Add libreadline-dev for Linux github action build #1146
2022-10-29 10:05:25 +00:00
- Implementation of SerialUPDI page erase operation #1151
2022-11-01 18:20:06 +00:00
- Fix Type 2 HV UPDI #1164
2022-11-19 09:00:20 +00:00
- Rewrite authors/copyrights #1182
2022-11-21 22:33:37 +00:00
- Add fallback for EM_AVR #1181
- Add a workaround for issue 1173 #1185
2022-11-22 01:29:07 +00:00
- Add xplainedpro_pdi programmer #1147
- Provide Urclock programmer #1171
- Fix JTAGICE mkII (not initializing after chip erase) #1172
- Ensure default_programmer from config files is used #1174
- Make terminal write's automatic number width less surprising
#1175
- Print HAVE_LIBREADLINE status when making the project #1184
2022-11-25 23:35:37 +00:00
- Pad pages with input file contents before avr_write() #1188
- Deprecate mosi/miso in favour of sdo/sdi #1189
- Provide bootloader-hash tool #1190
- Fix JTAGICE mkII parameters for parts with bootloaders #1191
- Fix shell exit value when chip erase is delayed #1194
2022-11-27 19:12:19 +00:00
- Support autobaud for urclock programmer #1198
- Fix userrow size and page_size for ATtiny3216/7 #1199
2022-12-14 00:27:13 +00:00
- Added TPI support for Microchip tools #1205
- Fix reading of .elf files #1206
- Use libedit only in interactive mode #1207
- Add urclock support for bootloaders in low flash #1208
- Terminal read improvements #1209
2022-12-21 19:14:50 +00:00
- Print meaningful error when a too slow ISP clock is detected #1216
- Check alternative USB PID for PICkit4/SNAP in PIC mode #1219
- Remove extraneous avrdude> prompt at end of terminal session #1220
- Read programmer serial number from libusb or hidusb #1223
- Hint at -xeepromrw option in EEPROM error messages #1226
- Add JTAG support for PICkit4 and Snap. #1233
2022-12-27 14:43:27 +00:00
- Mention developer options in documentation and Usage() #1234
2022-12-28 13:21:28 +00:00
- Print expected signature on signature mismatch #1237
2022-12-27 14:43:27 +00:00
- To work around Issue #1107 #1240
- Update build.sh for NetBSD #1241
2022-12-28 07:58:33 +00:00
- Add FT2232H support for Windows, Tigard programmer #1242
2022-12-29 03:03:08 +00:00
- Modify recv timeouts to accommodate urclock sync with ftdi
#1246
2022-12-31 16:14:49 +00:00
- CMake updates #1243
- Silence conf path detection debug output #1247
- Make WIN32 ser_recv() fail on time-out #1248
- Guard urclock_getsync() against initial spurious input #1251
2022-05-08 18:39:12 +00:00
* Internals:
2022-10-05 22:21:52 +00:00
- Implement -c <wildcard>/dev_opts and -p <wildcard>/dev_opts
for printing avrdude.conf programmer and part entries
2022-12-21 19:14:50 +00:00
- Added shorter alternative ISP commands for avrdude.conf
- Reformatted avrdude.conf to canonical form
2022-10-05 22:21:52 +00:00
- Reviewed API for prgrammer functions: use const for
programmer functions where useful; add second argument for
void (*enable)(PROGRAMMER *pgm, const AVRPART *p) #1078
2022-12-21 19:14:50 +00:00
- Reviewed messaging system making warnings and errors explicit
and treat them systematically
2022-10-05 22:21:52 +00:00
2022-05-07 20:39:47 +00:00
Changes in version 7.0:
* Major changes compared to the previous version:
- Completely revamped Windows support, including MSVC
- Started to add CMake (by now, parallel with autoconf/automake)
2022-01-21 20:55:36 +00:00
- New-architecture devices (AVR8X mega and tiny) can access all
fuses, and memory display shows meaningful alias names
- The "safemode" feature has been removed. The major class of
programmers it has been designed for (lowlevel bitbang
programmers on parallel or serial ports) virtually doesn't exist
anymore, and the fuse combination that was covered by it do not
match the fuses of modern AVR devices anyway.
- avrdude.conf is now being looked up in the location of the
executable file first, before considering the configured default
location; this eases a "portable use" where the entire suite is
not installed into its configured default location. (Basically
only relevant for unixoid systems; on Windows, this search order
has been used for many years already.)
* New devices supported:
2022-01-07 08:10:30 +00:00
- ATtiny828, ATtiny87, ATtiny167, ATtiny48, ATtiny102, ATtiny104
- LGT8F88P, LGT8F168P, LGT8F328P (fixed names of these parts)
- ATmeg164A, ATmega169A, ATmega169P, ATmega169PA, ATmega329A,
ATmega329PA, ATmega3290, ATmega3290A, ATmega3290PA, ATmega649A,
ATmega649P, ATmega6490A, ATmega6490P, ATmega165, ATmega165A,
ATmega165P, ATmega165PA, ATmega325A, ATmega325P, ATmega325PA,
ATmega645A, ATmega645P, ATmega3250A, ATmega3250P, ATmega3250PA,
ATmega6450A, ATmega6450P
2022-01-13 20:47:53 +00:00
- ATmega48A/48PA/88A/88PA/168A/168PA, ATmega164A/644A/644PA,
ATmega16A/32A/64A/128A, ATtiny13A, ATtiny24A/44A/84A,
ATtiny261A/461A/861A, ATtiny828R, ATtiny2313A, ATtiny1634R
- ATtiny3224, ATtiny3226 and ATtiny3227
- AVR16DD14/20/28/32, AVR32DD14/20/28/32 and AVR64DD14/20/28/32
- AVR8EA28/32, AVR16EA28/32/48, AVR32EA28/32/48 and AVR64EA28/32/64
2022-03-31 21:14:35 +00:00
- ATmega16U4
* New programmers supported:
- SerialUPDI (UPDI devices connected to serial port with few
passive parts)
- PicKit4 / SNAP (now also in ISP and PDI mode)
2022-01-07 08:08:58 +00:00
- Teensy bootloader (PR #802)
- Micronucleus bootloader (PR #786)
2022-01-18 12:26:52 +00:00
- ft232h (generic variant, PR #842)
2022-05-01 20:31:19 +00:00
- Kristech KT-LINK FT2232H interface with IO switching and voltage
buffers (PR #930)
* Issues fixed:
- Curiosity Nano and terminal mode #790 (only the actual bugs
reported)
- CMake doesn't correctly handle conditionals in avrdude.conf.in
#776
- CMake doesn't detect FreeBSD's libusb-1.0 (compatibility) #775
- CMake doesn't correctly handle conditionals in avrdude.conf.in
#776
2022-01-03 22:35:10 +00:00
- CMake: Recognize more than just bison #785
- [bug #26007] ATTiny167 not supported #150
- [bug #47375] ATtiny102/104 descriptions missing in configuration
file #409
- No error message when connecting to a not-connected AVRISP mkII
programmer #813
- [bug #53180] missing programmer or bad -P option argument
doesn't result in error message #471
2022-01-10 20:27:01 +00:00
- ATmega328P reported as lgt8fx328p #812
- [bug #48004] Dead link for linuxgpio in avrdude description #419
2022-01-11 21:13:57 +00:00
- Segmentation fault when writing ATtiny104 fuse #823
2022-01-27 22:20:26 +00:00
- USBasp returns ERANGE for unknown error #848
2022-01-30 09:45:53 +00:00
- Compiler warnings #856
2022-02-20 13:35:50 +00:00
- Can't get serialupdi to work #874
2022-02-20 13:37:04 +00:00
- Rework HID support for Windows #881
2022-02-20 15:58:39 +00:00
- List of signing keys? #884
2022-03-01 22:30:11 +00:00
- Pickit4 UPDI is writing at offset 0x4000 into flash instead of 0x0000. #892
2022-03-03 22:15:20 +00:00
- SerialUPDI programmer can't write to usersig/userrow in terminal mode #889
- Signature read command for ATmega165* was wrong (no-id)
- Cannot use non-standard baud rates for uploading on MacOS #771
- Wrong values in avrdude.conf #897
- AVR-Eclipse plugin broken by missing -u commandline option #890
2022-04-05 18:55:23 +00:00
- Timeout passed to hid_read_timeout() is too short for instances
where the EDBG AVRISP 'Enter Programming Mode' command fails #900
- Terminal write mode doesn't support string input (yet) #913
2022-04-10 20:20:11 +00:00
- Terminal mode: memory fill with strings may cause Avrdude to crash. #922
- Some parts have wrong or missing ISP commands #915
2022-05-01 20:31:19 +00:00
- Incorrect -b conversion for linuxspi programmer #927
- ATtiny43U calibration memory size #921
* Pull requests:
- GitHub Migration #765
- Update toplevel files. #767
- GitHub Migration part 2 #768
- Remove 'windows' folder with giveio.sys driver #769
- SerialUPDI implementation - release candidate 1 #772
- Fix typos #777
- Fix memory leaks #779
- As promised, documentation for SerialUPDI programmer #782
- Improve CMake project #783
- Fix avr_read() for page reads #784
- Serialupdi manpage #787
- Add PicKit4 and SNAP programmers #791
2022-01-03 22:35:10 +00:00
- Use yacc/byacc as an alternative to bison, closes #785 #793
- Derive program version string from last commit #794
- Find 'avrdude.conf' based on absolute path to executable #780
2022-01-04 13:07:15 +00:00
- buspirate: fix -Wtautological-constant-out-of-range-compare #796
2022-01-05 16:54:49 +00:00
- avrftdi: don't use the deprecated ftdi_usb_purge_buffers routine #792
2022-01-05 21:46:36 +00:00
- Ignore ctags index file #804
2022-01-06 14:55:51 +00:00
- term: fix memleakOnRealloc #806
- Add missing ATtiny targets to avrdude.conf #803
2022-01-07 08:08:58 +00:00
- Add support for Teensy bootloader #802
2022-01-07 08:23:49 +00:00
- Conffile clean up #801
2022-01-07 12:17:25 +00:00
- Fix typos all over the code #807
- Add MSVC builds and better WinUSB/FTDI support #798
2022-01-07 20:40:59 +00:00
- buspirate: fix invalidScanfArgType_int warning #808
2022-01-08 17:27:48 +00:00
- Ignore ac_cfg.h.in~ #810
- Notify open failure #814
2022-01-10 20:27:01 +00:00
- Print expected part #817
2022-01-10 20:33:31 +00:00
- pindefs: conform to the function declaration #818
- Add support for Micronucleus bootloader #786
2022-01-11 11:45:04 +00:00
- Remove ac_cfg.h from libavrdude.h #820
2022-01-11 14:41:32 +00:00
- CMake: enable dynamic-link library for libavrdude #826
2022-01-11 21:13:57 +00:00
- Fix for TPI fuse write (issue #823) #828
- Add missing ATmega__5 and ATmega__9 targets to avrdude.conf #809
2022-01-13 20:47:53 +00:00
- Add missing ATmega and ATtiny targets #832
2022-01-14 07:25:43 +00:00
- Added missing RTS/DTR management feature to serialupdi
programmer #811
- Add missing tinyAVR-2, AVR DD and AVR EA targets #836
2022-01-18 12:26:52 +00:00
- Add a new programmer ft232h #842
2022-01-20 09:23:31 +00:00
- Reduce verbosity when setting fuses and uploading programs #845
2022-01-21 20:28:15 +00:00
- jtagmkii: Reduce the number of sync attempts to 10 + print
number of attempts #844
2022-01-21 20:38:25 +00:00
- CMake: add initial support for installing lib and include files #829
- Add SPI support to USBtiny #816
2022-01-21 20:55:36 +00:00
- Add more memory sections to read from #815
2022-01-21 20:56:36 +00:00
- Add a build script for Unix-like systems #849
2022-01-27 22:20:26 +00:00
- Fix receive buffer implementation in ftdi_syncbb programmer #843
- CMake: split configuration in two files #852
- Set number of connection retry attempts for Arduino/STK500
programmer #854
- Fix libusb-1.0 error strings #850
2022-01-30 09:45:53 +00:00
- Assign proper type to msg[] in errstr() #857
- Fix Arduino retry attempts #855
2022-02-05 20:59:04 +00:00
- CMake: use CMAKE_CURRENT_BINARY_DIR to locate avrdude.conf #858
2022-02-05 21:03:59 +00:00
- Remove the "safemode" feature. #859
2022-02-10 19:39:51 +00:00
- Add support for reading from more memory sections #863
- Alias keyword #868
2022-02-11 20:17:01 +00:00
- Add fuse name aliases to avrdude.conf + tweak update.c #869
2022-02-11 20:45:31 +00:00
- Print JTAG3 clocks after configuration + string formatting #853
2022-02-11 21:17:09 +00:00
- Tweak programmer info formatting strings #872
2022-02-18 20:37:27 +00:00
- Remove libhid support in ser_avrdoper.c in favor of libhidapi #882
2022-02-18 21:53:45 +00:00
- Reduce jtag3 output verbosity #877
2022-02-18 22:02:25 +00:00
- Fix Curiosity Nano target voltage #878
- Smallest possible fix for PL2303HX #885
- Add missing USBtiny derived programmers #873
2022-02-20 19:59:28 +00:00
- Cleanup of POSIX serial init code #886
2022-02-21 20:54:47 +00:00
- Avrdude terminal write improvements #880
2022-02-21 22:28:50 +00:00
- Add userrow and usersig aliases #888
2022-03-01 22:30:11 +00:00
- For UPDI devices do not add offset when accessing flash. #895
2022-03-03 22:15:20 +00:00
- Support both userrow and usersig names #893
- Fix ugly terminal write bug #896
- Improve terminal read functionality #894
- Macos nonstandard baudrates #898
- Fix errors in Avrdude.conf #899
- Minor terminal write improvements #902
- Term docs #903
2022-03-31 21:14:35 +00:00
- Add progressbar for read and write command #912
- Add MacOS serial/parallel port note #908
- Add ATmega16U4 to avrdude.conf #910
- Mask out unused ATmega32U4 efuse bits #909
2022-04-05 18:55:23 +00:00
- Increased timeout passed to hid_read_timeout() #901
- Add terminal write string functionality #914
2022-04-10 20:20:11 +00:00
- Update documentation link to new URL #929
- Fix terminal write buffer overflow issue #924
2022-05-01 20:31:19 +00:00
- Fix linuxspi baud to clock period calculation #931
- Added KT-LINK FT2232H interface with IO switching and voltage buffers. #930
* Internals:
- Development moved to Github
2022-02-11 20:17:01 +00:00
- Addition of "alias" keyword to avrdude.conf.in syntax; used
for fuse name aliases right now
Version 6.4:
* Major changes compared to the previous version:
- libhidapi support (part of patch #8717)
- use libhidapi as (optional) transport for CMSIS-DAP compliant
debuggers (JTAGICE3 with firmware 3+, AtmelICE, EDBG, mEDBG)
- UPDI support added (AVR8X family)
- TPI support for USBtinyISP
- TPI support for ft245r
- TPI support for linuxgpio
- AVR Doper uses libhidapi rather than raw libusb (patch #9033)
- -P net:host:port can use IPv6 now (Posix systems only)
- New configure option: -disable-libusb_1_0
- extended UPDI device context (> 64 Ki flash)
- major overhaul of ft245r driver (patch #9327/#9328)
- some improvements in linuxspi driver
- Use -B <bitclock> rather than -b <baudrate> for linuxspi driver
- unused lock byte bits are not masked on read anymore
- parport support disabled by default; configure with
--enable-parport to explicitly enable it
* New devices supported:
- ATmega328PB
- AVR8X family, ATtiny1617, ATtiny817, ATtiny202, ATtiny204,
ATtiny402, ATtiny404, ATtiny406, ATtiny804, ATtiny806,
ATtiny807, ATtiny1604, ATtiny1606, ATtiny1607, ATtiny212,
ATtiny214, ATtiny412, ATTiny414, ATtiny416, ATtiny417,
ATtiny814, ATtiny816, ATtiny1614, ATtiny1616, ATtiny3214,
ATtiny3216, ATtiny3217, ATmega3208, ATmega3209, ATmega4808,
ATmega4809
- ATtiny841, ATtiny441
- ATmega64M1
- ATmega324A
- ATmega808, ATmega809, ATmega1608, ATmega1609, AVR DA, AVR DB
- LGT8FX88P, LGT8FX168P, LGT8FX328P
- ATmega324PB
- ATmega8A
* New programmers supported:
- ehajo-isp (commercial version of USBtiny)
- XplainedPro in UPDI mode
- XplainedMini in UPDI mode
- JTAGICE3 in UPDI mode
- Atmel Powerdebugger in all modes (JTAG, PDI, UPDI, debugWIRE, ISP)
- linuxspi (direct SPI bus e.g. on Raspberry Pi devices)
- PICkit4, Snap, PKoB
- iseavrprog
- XBeeBoot
* Bugfixes:
bug #47550: Linux GPIO broken
bug #47718: "lfuse reads as" not displayed in verbose mode - SOLUTION
bug #48084: Avoid compiled-in timestamp for reproducible release builds
bug #47376: ATtiny841 description missing in configuration file
bug #49455: support for tiny441
bug #57428: document when 'arduino' or 'wiring' should be used, and -D requirement of latter
bug #58095: error setting efuse on atmega328pb variant
bug #51409: Can't program EFUSE on ATmega32M1
bug #60753: Patch #1436 breaks multiple programmer/device combinations on MacOS BigSur
bug #59525: Bogus error message because Copy/Paste typo in stk500.c
bug #58078: [PATCH] buspirate: remove compound literals (fixes GCC>=9)
bug #57453: [PATCH] fix reference to nonexistant -m option by changing to -U
bug #59227: Add new part. How does one get a part added to the CONF file?
bug #55009: no efuses for m164a/pa
bug #55734: USBtiny programming of ATmega328p broken by Patch #9278
bug #58495: Add atmega324pb support to avrdude.conf.in
bug #60863: avrftdi programming error probably caused by multiple, consecutive empty pages
bug #50517: Reading fails if "immediate mode" for output file format is selected - fileio: invalid operation=1
bug #50630: Erase Cycle Counter options ( -y -Y n ) should be removed from usage Message
bug #48767: ser_drain() for TCP on Windows doesn't work
bug #46759: avrdude 6.1 -> 6.2 regression: lock byte verification error
bug #58440: linuxgpio PIN limit too low
bug #55462: wrong programmer id check in jtag3_getsync() and jtag3_close()
bug #58994: VPP PWM still enabled at the end of programming process
bug #57338: if safemode has to change fuses avrdude should exit with non-zero exit code
bug #60575: Permission denied on macOS Big Sur
* Patches:
patch #9482: Add support for UPDI and AVR8X
patch #9508: Add PowerDebugger and XPlained Mini in UPDI mode
patch #9507: Fix UPDI chip erase
patch #9506: Script to create device configuration stub from Atmel
ATDF files
patch #9423: Support ATtiny841 and ATtiny441
patch #9530: Update URL to Ladyada's USBtinyISP page.
patch #9317: Support atmega64m1 as part
patch #9222: Enable silent build
patch #8924: Enable TPI for usbtiny
patch #9033: avrdoper backend uses libhidapi instead of libusb
patch #8580: FT245r support to select device by serial number
patch #8910: ATxmega32c4 and ATxmega16c4 have wrong signatures
patch #8219: Fix boot_start for xmega devices on jtagmkII
patch #9185: Add extended_param to usbasp.c - erasing
patch #8311: Add IPv6 support to the -Pnet:host:port option
patch #9542: Correct "usersig" on avr8x devices
patch #8128: Added new option to configure.ac script
patch #8444: Proposal for modifications in -B and -U command options managment (partially)
patch #9735: spelling error fix: psuedo -> pseudo
patch #9893: [PATCH] Reader reads ftdi handle after main thread close it
patch #9819: Address several leaks in SVN rev 1429
patch #9820: Fix some out-of-bounds/uninitialized issues
patch #9818: correct typos in SVN rev 1429
patch #9732: usbtiny_paged_load overflows buffer e.g. when reading EEPROM
patch #9966: Add JTAGICE3 in UPDI mode
patch #9963: UsbAsp 3 MHz patch for UsbAsp-flash firmware
patch #9816: Implement new programmer type: linuxspi
patch #9811: ATmega328pb has efuse bit 3
patch #9744: Patch for ATMega324A support
patch #10000: Add support for extended UPDI device context
patch #9697: Add iseavrprog support
patch #10017: uspasp / tpi: Automatically clear configuration byte (fuse) before writing it
patch #8957: Allow reading prodsig memory from stk500v2 on xmega devices
patch #9110: Let reserved fuse bits to be read as *don't care*
patch #9253: Fix for giving terminal_mode commands more than 20 arguments
patch #9320: fix TPI RESET in bitbang.c
patch #9079: Fix ftdi_syncbb teardown (supersedes #9893, superseded by #9328)
patch #9122: Fixed MISO sampling in ftdi_syncbb
patch #9123: ftdi_syncbb: use FT245R_CYCLES in ft245r_set_bitclock()
patch #8719: Support Over-the-Air bootloading with XBeeBoot
patch #9757: Fix ATtiny817 Xplained Mini programmer
patch #9327: ft245r.c: add TPI support (patches 1-4)
patch #9328: ft245r.c: add TPI support (patches 5-7)
patch #10027: linuxspi: Add reset pulse, according to AVR programming algorithm
patch #10028: linuxspi: close() only when necessary
patch #10029: linuxspi: Report GPIO_GET_LINEHANDLE_IOCTL errors
patch #10030: linuxspi: Support inverted GPIO pin
patch #10031: linuxspi: Support GPIO uAPI v2
(no-id): Improve documentation of linuxspi driver, provide portname default
(no-id): Use -B <bitclock> rather than -b <baudrate> for linuxspi driver
patch #9304: [Bug #48767] Implemented WinSock variation of "ser_drain(...)" functionality
patch #8996: Remove lock byte read mask (bug#21954, bug#46759)
patch #8923: Enable TPI for linuxgpio
patch #10153: linuxspi: Support "-E reset" and "-E noreset"
* Internals:
- New avrdude.conf keyword "family_id", used to verify SIB attributes
on AVR8X architecture if device is locked.
Version 6.3:
* Major changes compared to the previous version:
- Backout of
patch #8380: adds 500k 1M 2M baud to ser_posix.c
It broke the functionality in too many situations
(bug #46610/46483)
* New devices supported:
- ATmega48PB, ATmega88PB, ATmega168PB
- ATtiny28 (HVPP-only device)
* New programmers supported:
- Atmel mEDBG: xplainedmini, xplainedmini_dw
* Bugfixes
- bug #46610: Floating point exception (core dumped) arch linux rpi2
- bug #46483: version 6.2. ser_open(): can't set attributes for device
- patch #8435: Implementing mEDBG CMSIS-DAP protocol
- patch #8735: ATtiny28 support in avrdude.conf
- patch #8896: Silence cppcheck warnings in 6.2 code
- patch #8895: Spelling in 6.2 code
Version 6.2:
* Major changes compared to the previous version:
- The stk500v2 implementation now uses its own higher-level
command implementation for byte-wide access, rather than the
historic SPI_MULTI command where all the low-level ISP
implementation had to be assembled manually inside AVRDUDE. In
addition to the traditional STK500, this implementation is also
used by all the more modern Atmel tools (AVRISPmkII, JTAGICEmkII
in ISP mode, STK600 in ISP mode).
- The -B option can be suffixed with "Hz", "kHz", or "MHz", in
order to specify a bitclock frequency rather than period.
- Print part id after signature (patch #8440 )
- buspirate: Also support "cpufreq" extended parameter
in binary mode (patch #8504 )
- The "-P net:" syntax (forwarding of serial data over TCP) is now
also implemented for Win32 systems.
- Allow for arbitrary serial baudrates under Linux (OSX and *BSD
could already handle it).
* New devices supported:
- AT90PWM216 (bug #42310: New part description for AT90PWM216)
- ATmega32M1 (patch #7694 Add support for the atmega32m1)
* New programmers supported:
- ftdi_syncbb
+ uncompatino, ttl232r (FTDI TTL232R-5V with ICSP adapter)
(patch #8529 2 more ftdi_syncbb devices)
* Bugfixes
- bug #45727: Wrong atmega8u2 flash parameters
- bug #46020: Add TIAO TUMPA to the conf file.
- bug #46021: Please add read in the memory lock section of ATtiny85
- bug #42337 avrdude.conf updates for UM232H/CM232H
- bug #42056: double free or corruption triggered at exit
- bug #42158: Linux GPIO - Source Typo
- bug #42516 spelling-error-in-binary
- patch #8419 fix ftdi_syncbb hang with libftdi 1
- bug #43002 usbasp debug output typo
- patch #8511 Fix reset on FT245R
- bug #40142 Floating point exception on Ubuntu 10.04
- bug #22248: Read efuse error (partial fix)
- bug #42267: jtag3isp fails to read lock and fuse bytes directly
after changing lock byte
- bug #41561: AVRDUDE 6.0.1/USBasp doesn't write first bytes of
flash page
- bug #43078: AVRDUDE crashes after sucessfully reading/writing eeprom
- bug #43137: Writing and reading incorrect pages when using jtagicemkI
- bug #40870: config nitpick: ATtiny25/45/85 have 1 calibration byte not 2
- bug #42908: no external reset at JTAGICE3
- patch #8437: [PATCH] Serial-over-ethernet for Win32
- bug #44717: avrdude creates empty flash dump
* Internals:
- Removing exit calls from config parser
- bug #42662 clang warnings under FreeBSD 10.x
Version 6.1:
* Major changes compared to the previous version:
- Atmel EDBG protocol support added (JTAGICE3, XplainedPro, Atmel-ICE)
* New programmers supported:
- Atmel DFU, using FLIP protocol version 1 (AT90USB and ATmega*U* devices),
or version 2 (Xmega devices)
- Atmel-ICE (ARM/AVR), JTAG, PDI, debugWIRE, ISP modi
* Bugfixes
- bug #40055: AVRDUDE segfaults when writing eeprom
- bug #40085: Typo fix in fuses report (for 6.1-svn-20130917)
- bug #40782: Verify errors for object size > 16 k on x32e5 due
to typo in avrdude.conf
- bug #40817: Elf file support (possibly) not working on 6.0.1 windows build
- bug #40897: AT Mega2560 not correctly programmed with stk500(v1)
ISP (solution patch)
- bug #41357: OS X: Avrdude messes with the usb stack?
- bug #41402: dfu.c missing include <stdint.h>
- patch #7896: DFU FLIPv2 programming support
- patch #XXXX: xxx
* Internals:
- (Some) programmers can take a list of USB PIDs now.
Version 6.0:
* Major changes compared to the previous version:
- Programmer types in configuration file are no longer keywords but
specified as string.
So you need to change 'type = XYZ;' to 'type = "XYZ";' in own
config files. (internal: The parser does not need to know all
programmer types now, new programmers will update only the table
in pgm_type.c.)
- The erase cycle counter (formerly options -y / -Y) has been
removed.
- Specifying a -U option without a memory type (short form of
option argument list) now defaults to "application" memory for
Xmega devices, and "flash" for everything else. This ensures
the Xmega bootloader is not accidentally touched.
- For programmers that support it, the default erase method is a
page erase now, rather than a chip erase (Xmega only).
- Keep track of input file contents
Memory segments are being tracked to remember whether they've
been actually read from a file. Only segments that came from a
file are being programmed into the device, or considered for
verification. This drastically improves handling speed for
sparse files (e.g. files that have a second bootloader segment),
and it ensures the device contents is actually compared for
everything mentioned in the file (even in case the file has
large 0xFF blocks).
- The -U option now accepts ELF files as input files, and extracts
the appropriate section contents that matches the requested memory
region. To enable this feature, the host system used for the
compilation must have a libelf around, including the respective
header files (i.e., package "libelf-devel" on many Linux systems).
- Programmers and parts lists
They are now sorted at output with '-c ?'/'-p ?'. (patch #7671:
Sorting programmers and parts lists for console output)
Programmers and parts lists in documentation generated from lists
mentioned above. (patch #7687: Autogenerating programmers and
parts lists for docs)
Output list of programmer types with '-c ?type', add list to
documentation
- Configuration files now accepts parent parts/programmers, parts
starting with '.' (eg. .xmega) are not included in output parts
list and can be used as abstract parents
(bug #34302: Feature request : device configuration with parent classes)
(patch #7688: Implement parent programmers feature)
- Additional config files which are read after default can be
specified on command line using '-C +filename'
(patch #7699 Read additional config files)
- "Safemode" can now be turned off by default from within a
configuration file (like ~/.avrduderc).
- The new option -l logfile allows to redirect diagnostic messages
to a logfile rather than stderr. Useful to record debugging
traces, in particular in environments which do not offer
shell-style redirection functionality for standard streams.
- When leaving debugWIRE mode, immediately retry with ISP rather
than bailing out completely.
- The USBasp programmer implementation now supports detailed traces
with -vvv, and device communication traces with -vvvv.
- The "verbose" terminal mode command allows to query or modify the
verbosity level.
* New devices supported:
- ATmega48P (patch #7629 add support for atmega48p)
- AT90PWM316 (bug #21797: AT90PWM316: New part description)
- ATxmega16D4, ATxmega32D4, ATxmega64D4, ATxmega128D4
- ATmega256RFR2, ATmega128RFR2, ATmega64RFR2, ATmega2564RFR2,
ATmega1284RFR2, ATmega644RFR2
- ATtiny1634
- ATxmega128A1U, ATxmega128A3U, ATxmega128A4U, ATxmega128B1,
ATxmega128B3, ATxmega128C3, ATxmega128D3, ATxmega16A4U,
ATxmega16C4, ATxmega192A3U, ATxmega192C3, ATxmega192D3,
ATxmega256A3BU, ATxmega256A3U, ATxmega256C3, ATxmega256D3,
ATxmega32A4U, ATxmega32C4, ATxmega384C3, ATxmega384D3,
ATxmega64A1U, ATxmega64A3U, ATxmega64A4U, ATxmega64B1,
ATxmega64B3, ATxmega64C3, ATxmega64D3
- ATtiny43U
- ATmega406
- ATxmega8E5, ATxmega16E5, ATxmega32E5
- ATtiny20, ATtiny40
* New programmers supported:
- linuxgpio
+ any (embedded) Linux system with 4 GPIOs available can be used
as a programmer with little or no additional hardware.
- avrftdi
+ o-link (patch #7672 adding support for O-Link (FTDI based
JTAG) as programmer)
+ 4232h (patch #7715 FT4232H support)
- TPI support
+ openmoko (bug #37977 Support for Openmoko Debug Board)
- usbasp
+ nibobee (previously specified as '-c usbasp -P nibobee)
+ usbasp-clone (same as usbasp but ignores vendor and product
string, checks only vid/pid)
- ftdi_syncbb (new type for synchronous bitbanging with ft232r/ft245r)
+ ft245r (FT245R Synchronous BitBang, miso = D1, sck = D0, mosi
= D2, reset = D4)
+ ft232r (FT232R Synchronous BitBang, miso = RxD, sck = RTS,
mosi = TxD, reset = DTR)
+ bwmega (BitWizard ftdi_atmega builtin programmer, miso = DSR,
sck = DCD, mosi = CTS, reset = RI)
+ arduino-ft232r (Arduino: FT232R connected to ISP, miso = CTS
X3(1), sck = DSR X3(2), mosi = DCD X3(3), reset = RI X3(4))
+ diecimila (alias for arduino-ft232r)
- pickit2
- Atmel JTAGICE3
- buspirate_bb (TPI programming using the BusPirate in bitbang mode)
* Bugfixes
- bug #34027: avrdude AT90S1200 Problem
- bug #34518: loading intel hex files > 64k using record-type 4
- patch #7667: Minor memory handling fixes
- patch #7680: Fixing timeout problem in ser_recv in ser_win32.c
- patch #7693: Fix config file atmel URLs (+ URLs in
avrdude.texi and avrpart.h)
- bug #21663: AT90PWM efuse incorrect, bug #30438: efuse bits
written as 0 on at90pwmxx parts
- bug #35261: avrftdi uses wrong interface in avrftdi_paged_(write|load)
- patch #7437 modifications to Bus Pirate module
- patch #7686 Updating buspirate ascii mode to current firmware,
use AUX as clock generator, and setting of serial receive
timeout
- bug #34768 Proposition: Change the name of the AVR32 devices
- patch #7718: Merge global data of avrftdi in a private data
structure
- bug #35208: avrdude 5.11 on freebsd 8.2-STABLE does not reset
Arduino Uno properly
- bug #34518: loading intel hex files > 64k using record-type 4
(Extended Linear Address Record)
- bug #34027: avrdude AT90S1200 Problem
- bug #30451: Accessing some Xmega memory sections gives not
supported error
- bug #28744: Can't load bootloader to xmega128a1
- bug #29019: pagel/bs2 warning when uploading using stk500 to xmega
- bug #30756: When setting SUT to 64ms on XMEGA, avrdude doesn't
read device signature
- bug #37265: wrong page sizes for XMega64xx in avrdude.conf
- bug #37942: Latest SVN can't program in dragon_jtag mode
- patch #7876 JTAGICE mkII fails to connect to attiny if debugwire
is enabled AND target has a very slow clock
- bug #39893: Verification failure with AVRISPmkII and Xmega
- bug #38713: Compilation of the documentation breaks with texinfo-5
- bug #38023: avrdude doesn't return an error code when attempting
to upload an invalid Intel HEX file
- bug #39794: warnings when building avrdude 6.0rc1 under CentOS 6.4
- bug #35800: Compilation error on certain systems if parport is disabled
- bug #38307: Can't write usersig of an xmega256a3
- bug #38580: Current svn head, xmega and fuses, all fuses tied to fuse0
- bug #39691: Buffer overrun when reading EEPROM byte with JTAGICE3
- bug #38951: AVR109 use byte offset instead of word offset
- patch #7769: Write flash fails for AVR910 programmers
- bug #38732: Support for ATtiny1634
- bug #36901: flashing Atmega32U4 EEPROM produces garbage on chip
- bug #28344: chip_erase_delay too short for ATmega324P, 644, 644P, and 1284P
- bug #34277: avrdude reads wrong byte order if using avr911 (aka butterfly)
- bug #35456: The progress bar for STK500V2 programmer is "wrong".
- patch #5708: avrdude should make 10 synchronization attempts instead of just one
- patch #7606: ATtiny43u support
- patch #7657: Add ATmega406 support for avrdude using DRAGON + JTAG
- bug #35474: Feature request: print fuse values in safemode output.
- patch #7710: usb_libusb: Check VID/PID before opening device
- [no-id]: Fix SCK period adjustment for STK500v2
- bug #40040: Support for ATtiny20 and ATtiny40
* Internals:
- Restructuring and compacting programmer definition part of
grammar for config file.
- Cleanup of parser code, removing unused definitions/
functions. Using yylex_destroy if available.
- Fixed some more memory leaks, added cleanup code at program exit
(to minimize the number of non-freed memory blocks reported by
valgrind)
- Fixed some findings reported by cppcheck.
Version 5.11:
* New devices supported:
- ATmega88P/168P
- ATmega8U2/16U2/32U2
- ATtiny4313
* New programmers supported:
- TPI programming through bitbang programmers (both, serial
and parallel ones)
- FT2232 (and relatives) based programmers (MPSSE bitbang mode)
- Wiring environment (http://wiring.org.co/)
- butterfly-style bootloader of the Mikrokopter.de device
* Bugfixes
Version 5.10:
* Bugfixes
- bug #28660: Problem with loading intel hex rom files that exceed
0x10000 bytes
- see ChangeLog for further details
* New Features
- (JTAG ICE / AVR Dragon) apply external reset if JTAG ID could
not be read
Version 5.9:
* New devices supported:
- AVR32A0512 (JTAGMKII only)
- ATmega32U4
- ATtiny4
- ATtiny5
- ATtiny9
- ATtiny10
* New programmers supported:
- BusPirate
- Arduino
- JTAGICEmkII and AVR Dragon in PDI mode (ATxmega devices)
- STK600 and AVRISP mkII in TPI mode (ATtiny4/5/9/10)
* Bugfixes
- see ChangeLog and ChangeLog-2009 for details
Version 5.8:
* Bugfixes; most importantly, fix a serious memory corruption for
that JTAG ICE mkII and AVR Dragon in ISP/HVSP/PP mode.
Version 5.7:
* New devices supported:
- ATXMEGA64A1
- ATXMEGA192A1
- ATXMEGA256A1
- ATXMEGA64A3
- ATXMEGA128A3
- ATXMEGA192A3
- ATXMEGA256A3
- ATXMEGA256A3B
- ATXMEGA16A4
- ATXMEGA32A4
- ATXMEGA64A4
- ATXMEGA128A4
* Major Xmega fixes for the JTAG ICE mkII (patch #6825)
* Bugfixes.
Version 5.6:
* New devices supported:
- AT90USB82
- AT90USB162
- ATtiny88
- ATmega328P
- ATmega1284P
- ATmega128RFA1
- ATxmega128A1 rev D
- ATxmega128A1
- ATxmega256A3
* New programmers supported:
- AT89ISP cable (patch #6069)
- Arduino
* Add support for the -x option to pass extended parameters to the
programmer backend.
* Add support for JTAG daisy-chains, using the -x daisychain=
option.
Add initial support for the Atmel STK600, for "classic" AVRs (AT90, ATtiny, ATmega) in both, ISP and high-voltage programming modes. * Makefile.am: Add -lm. * avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp. * config_gram.y: Add support for the stk600* keywords. * lexer.l: (Ditto.) * pgm.h: Add the "chan" parameter to set_varef(). * stk500.c: (Ditto.) * serial.h: Add USB endpoint support to struct filedescriptor. * stk500v2.c: Implement the meat of the STK600 support. * stk500v2.h: Add new prototypes for stk600*() programmers. * stk500v2_private.h: Add new constants used in the STK600. * term.c: Add AREF channel support. * usb_libusb.c: Automatically determine the correct write endpoint ID, the STK600 uses 0x83 while all other tools use 0x82. Propagate the EP to use through struct filedescriptor. * usbdevs.h: Add the STK600 USB product ID. * tools/get-stk600-cards.xsl: XSL transformation for targetboards.xml to obtain the list of socket and routing card IDs, to be used in stk500v2.c (for displaying the names). * tools/get-stk600-devices.xsl: XSL transformation for targetboards.xml to obtain the table of socket/routing cards and their respective AVR device support for doc/avrdude.texi. * avrdude.1: Document all the STK600 stuff. * doc/avrdude.texi: Ditto. Added a new chapter for Programmer Specific Information. Thanks to Eirik Rasmussen from Atmel Norway for his support in getting this code running within that short amount of time! git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
* Add support for the Atmel STK600 for "classic" AVRs (AT90, ATtiny,
ATmega), using either ISP or high-voltage programming modes.
* Add support for the -x devcode extended parameter to the avr910
programmer, to allow overriding the device code sent to the
programmer.
* Add support for the Crossbow MIB510 programmer (patch #6074, #6542).
* Add support to bootstrap with GNU autoconf 2.61, and automake 1.10,
respectively.
* Add support for ATxmega128A1 (including the revision D engineering
samples) for STK600 and AVRISPmkII tools using PDI
* The option combination -tF now enters terminal mode even if the
device initialization failed, so the user can modify programmer
parameters (like Vtarget).
* Add preliminary support for ATxmega128A1 for the JTAG ICE mkII using
JTAG.
* Add support for direct SPI transfers (bug #25156).
* Bugfixes.
Version 5.5:
* Add support for the USBtinyISP programmer (patch #6233)
* Add support for the C2N232I serial bitbang programmer (patch #6121)
* Bugfixes.
Version 5.4:
* New devices supported:
- AT90PWM2B/AT90PWM3B
* Bugfixes.
* Source code rearranged so that the functionality is now built
into a libavrdude.a library where main.c is currently the only
existing frontend.
* Implement ATmega256x support for butterfly/avr109.
Version 5.3.1:
* Add support for the AVR Dragon (all modes: ISP, JTAG, HVSP, PP,
debugWire).
* Add support for debugWire (both, JTAG ICE mkII, and AVR Dragon).
* Add support for the AVR Doper USB HID-class programmer.
* Bugfixes.
Version 5.2:
* New devices supported:
- AT90USB646/647/1286/1287
- ATmega2560/2561
- ATmega325/3250/645/6450
- ATtiny11 (HVSP only device)
- ATtiny261/461/861
* Fixed paged flash write operations for AT90PWMx devices
(error in datasheet).
* Add signature verification.
* Add high-voltage mode programming for the STK500 (both,
parallel, and high-voltage serial programming).
* Add support for using the JTAG ICE mkII as a generic ISP
programmer.
* Allow for specifying the ISP clock delay as an option for
bit-bang programming adapters.
* Add support for Thomas Fischl's USBasp low-cost USB-attached
programmer.
* The "stk500" programmer type is now implemented as a stub
that tries to probe for either "stk500v1" or "stk500v2".
* Many bugfixes.
Version 5.1:
* New devices supported:
- ATmega640/1280/1281
- ATtiny24/44/84
* JTAG mkII support now works with libusb-win32, too
* JTAG ICE mkI support has been added
* Solaris support has been added (including ecpp(7D) parallel-port
bit-bang mode)
Version 5.0:
* Support for JTAGICE MkII device
* Support for STK500 Version 2 Protocol
* New devices supported:
- AT90CAN128
- ATmega329x/649x
- ATmega164/324/644
- AT90PWM2/3,
- ATmega164/324/644
- ATmega329x/649x
- ATtiny25/45/85
* Support for serial bit-bang adapters: Ponyprog serial, UISP DASA,
UISP DASA3.
* DAPA programmer pinout supported
* New "safemode" feature where fuse bits are verified before exit
and if possible recovered if they have changed. This is intended
to protect against changed fuses which were not requested which is
reported to sometimes happen due to improper power supply or other
reasons.
* Various fixes for avr910 and butterfly programmers
* Full support for AVR109 boot loaders (butterfly)
* Adding -q -q suppresses most terminal output
Version 4.4.0:
* Native Win32 support: The windows build doesn't need Cygwin
anymore. Additionally, the delay timing on windows should be
more accurate now.
Contributed by Martin Thomas
* Add support for
- ATmega48, ATmega88 (contributed by Galen Seitz)
- ATtiny2313 (contributed by Bob Paddock)
- ATtiny13 (contributed by Pawel Moll)
* Added command to change the SCK of STK500-programmers. Now it
is possible to program uC with slow oscillator.
Contributed by Galen Seitz
* Baudrate for serial programmers (STK500 and AVR910) is
configurable in the config or at the command-line.
This way some more tweaked bootloaders and programmers can be used.
* Deprecated options have been removed.
Now the "-U" option must be used.
* MacOS X now supported by default.
Version 4.3.0:
* Added support for "Butterfly" evaluation board.
* Make cycle-count work with AVR910-programmers.
* Added "Troubleshooting"-Appendix to the manual.
* Add ATmega8515 support.
Contributed by: Matthias Weißer <matthias@matwei.de>
* Add ATmega64 support.
Contributed by: Erik Christiansen <erik@dd.nec.com.au>
* Improved polling algorithm to speed up
programming of byte oriented parallel programmers.
Contributed by: Jan-Hinnerk Reichert <jan-hinnerk_reichert@hamburg.de>
* Add "fuse" and "lock" definitions for the AT90S8535.
* STK500 skips empty pages in paged write resulting in faster downloads
when there are empty blocks in between code (such as files that contain
application code and bootloader code).
Version 4.2.0:
* Add basic support for reading and writing fuses via SPI with avr910
programmers. Submitted by
Jan-Hinnerk Reichert <jan-hinnerk_reichert@hamburg.de>.
* Perform an auto erase before programming if the flash memory is
anywhere specified to be written by any of the -U requests. Old
style memory specification options (-f, -i, -I, -m, and -o) are
deprecated in favor of the new -U options. Auto erase is disabled
if any of the old-style options (specifically -i and -o) are
specified.
* Add new -U option for specifying programming operations - allows
multiple memory operations on a single command line.
* New progress reporting, looks nicer and is nicer to wrapper
environments such as emacs.
* Fix long-standing timing (verify) problems on Windows platform.
Submitted by Alex Shepherd <ashepherd@wave.co.nz>.
* Add new file format option - 'm' for "immediate mode." In this
case, the filename argument of the -o, -i, or -U options is
treated as the data for uploading - useful for specifying fuse
bits without having to create a single-byte file for uploading.
* Add support for displaying and setting the various STK500 operational
parameters (Vtarget, Varef, Master clock).
* Add 'picoweb' programming cable programmer.
Contributed by Rune Christensen <rune.christensen@adslhome.dk>.
* Add support for the sp12 programmer. Submitted by
Larry Barello <larryba@barrello.net>.
Version 4.1.0
* Add support for the Bascom SAMPLE programmer. Submitted by
Larry Barello <larryba@barrello.net>.
* Add support for avr910 type programmers (mcu00100, pavr avr910, etc).
* Support new devices: ATmega8535, ATtiny26
Version 4.0.0
* Now support Linux - added by "Theodore A. Roth" <troth@openavr.org>.
* Now support Windows - added by "Eric B. Weddington" <eric@ecentral.com>.
* Use 'configure' scripts to tailor the code to the system avrdude
is getting ready to be compiled on - added by "Theodore A. Roth"
<troth@openavr.org>.
* Motorola S-Record support - submitted by "Alexey V.Levdikov "
<tsar@kemford.com>.
* Support parallel programming on the STK500. Introduce 'pagel' and
'bs2' keywords to the config file for this purpose.
* Add support for the AT90S2343
* Add support for the ATmega169
* Add ability to specify system defaults within the config file
(default parallel port, default serial port).
* Specify the default programmer seperately from the programmer
definition. This is now done in the config file using the
'default_programmer' keyword.
* Support a per-user config file (~/.avrduderc) so that one can
override system wide defaults if desired.
* Follow the datasheet more closely for several parts in the "retry"
code when entering programming mode fails initially. Introduce
'retry_pulse' to the config file for this purpose.
Version 3.1.0
* This change represents a name change only. There is currently an
effort to port AVRPROG to other platforms including Linux and
Windows. Since Atmel's programmer binary that's included within
their AVR Studio software is named AVRPROG.EXE on the Windows OS,
there is the chance for confusion if we keep calling this program
AVRPROG as well. Up until now the name hasn't really been a
problem since there was no chance to confuse 'avrprog' on Unix
with Atmel's AVRPROG because Atmel's tools only run on Windows.
But with the Unix 'avrprog' possibly being ported to Windows, I
felt a name change was the best way to avoid problems.
So - from this point forward, my FreeBSD Unix program formerly
known as AVRPROG will subsequently be known as AVRDUDE (AVR
Downloader/UploaDEr).
This change also represents a time when the AVRDUDE sources move
from my own private repository to a public repository. This will
give other developers a chance to port AVRDUDE to other platforms
and extend its functionality to support additional programming
hardware, etc.
So goodbye AVRPROG, welcome AVRDUDE!
Version 3.0.0
* Rewrite parts of the code to make it easy to support other types
of programmers besides the directly connected parallel port
programmer (PPI).
* Add support for Atmel's STK500 programmer/development board. The
STK500's "paged mode" read/write is supported which makes this
programmer very fast. This is sorely needed on parts with large
memories such as the ATmega128. My 12K test program burns in
about 5 seconds, add another 5 to read it back out for
verification.
Version 2.1.5:
* When getting ready to initiate communications with the AVR device,
first pull /RESET low for a short period of time before enabling
the buffer chip. This sequence allows the AVR to be reset before
the buffer is enabled to avoid a short period of time where the
AVR may be driving the programming lines at the same time the
programmer tries to. Of course, if a buffer is being used, then
the /RESET line from the programmer needs to be directly connected
to the AVR /RESET line and not via the buffer chip.
Feature contributed by Rick C. Petty <rick@KIWI-Computer.com>.
* When in interactive terminal mode and dumping memory using the
'dump <memtype>' command without any address information, and the
end of memory is reached, wrap back around to zero on the next
invocation.
Version 2.1.4:
* Fix -Y option.
Version 2.1.3:
* Be backward compatible when reading 2-byte rewrite cycle counters
as written by avrprog version 2.1.0. Version 2.1.1 changed over
to a 4-byte counter, which caused avrprog versions 2.1.1 and 2.1.2
to report a negative count for parts that were initialized using
version 2.1.0. Thanks to Joerg Wunsch for noticing this.
Version 2.1.2:
* Add '-V' option to disable automatic verify check with uploading
data.
Version 2.1.1:
* Fix ATmega128 instruction sequences for reading fuse bits -
contributed by Joerg Wunsch.
* Modify erase-rewrite cycle counter code to use a 4 byte counter
instead of a two byte counter.
Version 2.1.0:
* Implement a per-part erase-rewrite cycle counter; requires the use
of two bytes of EEPROM memory.
Version 2.0.5:
* Support for ATtiny15 - contributed by Asher Hoskins
Version 2.0.4:
* Config file fixes for various parts.
Version 2.0.3:
* Work around problem programming fuse bits on parts like the
at90s4433 as described in the following errata:
http://www.atmel.com/atmel/acrobat/doc1280.pdf
* Add part definition for at90s4414, at90s4433.
* Add fuse/lock bit memory instructions for the at90s1200,
at90s2333, at90s4433 and at90s8515.
* Fix setting of programmer status LEDs under certain write-fail
conditions.
Version 2.0.2 :
* Fix writing to read-only memories such as the lock bits of the
AT90S2313.
* Copyright updates.
Version 2.0.1 :
* Use correct parallel port pins for VCC.
* Add programmer definition for Atmel's STK200.
* Add programmer definition for the AVR3 board.
* Fix address bit encoding for many parts.
* Allow the ``BUFF'' signal to be asserted by multiple pins of the
parallel port (like VCC) instead of just one. The STK200 appears
to need this feature.
Version 2.0.0 :
* Add support for programming fuse and lock bits if supported by the
part.
* Move instruction encoding into the config file. Now any part can
be supported as long as it uses the same basic serial programming
instruction format.
* Add part definitions for the ATMega163 and ATMega8 devices.
Version 1.4.3 :
* Mostly internal code cleanup.
Version 1.4.2 :
* Fixes for ATMega paged memory support.
* Support for ATMega16 device.
Version 1.4.1 :
* No functional changes, update to Copyrights only.
Version 1.4.0 :
* Add part definitions to the config file.
* Add initial support for Atmel's ATMega paged memory parts.
* Config file documentation added.
* Add a definition for the Dontronics DT006 programmer.
* Fix Intel Hex support for addresses larger than 64k.
Version 1.3.0 :
* Make programmer pin assignments configurable.
Version 1.2.2 :
* Initial public release.