Files
jimmyandClaude Opus 5.5 09aab70bd6 Put the movers' Wander and Ballyhoo speed on knob 13 in the test show.
A Movers speed dial on knob 13 (CC 42), beside the cans' Speed dial, sets
how long Wander takes to go round and gives Ballyhoo an eighth of it
(scripts/shows/mover_speed.py).

QLC+ 4.12 counts an EFX's fade-in inside every round, so Wander has been
taking 22 s and Ballyhoo 2.5 s, not 24 s and 3 s. The dial keeps those as
its starting point and runs from 62 s and 7.5 s fully left to 10 s and 1 s
fully right. The fade-ins stay, so the movers don't jump when either starts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 01:46:27 +13:00

89 lines
3.1 KiB
Python

#!/usr/bin/env python3
"""Add a Wander pad for the movers to shows/test.qxw, on note 93.
On the movers layer (Pause on), pad 10 toggles a slow relative EFX that drifts
all four movers around wherever the Pan and Tilt knobs (9 and 10, CC 38 and 39)
put them, so turning the knobs moves the middle of the wander:
93 Wander a Lissajous about ±30° of pan and ±10° of tilt, 22 s round
Each mover starts a quarter of the way further round, so they don't move as one.
It fades in over 2 s, so the movers ease off the knob position. QLC+ counts the
fade-in inside each 24 s round, which leaves 22 s. QLC+ 4.12 leaves
a relative EFX's last offset on the movers when it stops (with or without a
fade-out), so the pad controller nudges the two knobs when Wander goes off
(padcontroller/layer.py).
python3 scripts/shows/mover_wander.py
Run it once on a show without it; it stops if it is already there.
QLC+ has to reopen the show to see it.
"""
from __future__ import annotations
import re
from mover_bank import LEFT_TO_RIGHT, NO_FUNCTION, ROOT, button, note
SHOW = ROOT / "shows" / "test.qxw"
WIDTH, HEIGHT = 14, 10 # of 255 each way: 540° of pan, 270° of tilt
ROUND_MS = 24000
FADE_IN_MS = 2000
def efx(fid: int) -> str:
fixtures = "".join(f""" <Fixture>
<ID>{f}</ID>
<Head>0</Head>
<Mode>0</Mode>
<Direction>Forward</Direction>
<StartOffset>{90 * i}</StartOffset>
</Fixture>
""" for i, f in enumerate(LEFT_TO_RIGHT))
# Relative: the EFX adds its offset from 127 to the Pan and Tilt sliders' levels.
return f""" <Function ID="{fid}" Type="EFX" Name="Movers wander">
{fixtures} <PropagationMode>Parallel</PropagationMode>
<Speed FadeIn="{FADE_IN_MS}" FadeOut="0" Duration="{ROUND_MS}"/>
<Direction>Forward</Direction>
<RunOrder>Loop</RunOrder>
<Algorithm>Lissajous</Algorithm>
<Width>{WIDTH}</Width>
<Height>{HEIGHT}</Height>
<Rotation>0</Rotation>
<StartOffset>0</StartOffset>
<IsRelative>1</IsRelative>
<Axis Name="X">
<Offset>127</Offset>
<Frequency>3</Frequency>
<Phase>90</Phase>
</Axis>
<Axis Name="Y">
<Offset>127</Offset>
<Frequency>2</Frequency>
<Phase>0</Phase>
</Axis>
</Function>
"""
def main() -> None:
xml = SHOW.read_text()
if 'Name="Movers wander"' in xml:
raise SystemExit(f"{SHOW.relative_to(ROOT)} already has the movers wander")
engine, console = xml.split("<VirtualConsole>")
fid = max(int(i) for i in re.findall(r'<Function ID="(\d+)" Type', engine)) + 1
wid = max(int(i) for i in re.findall(r' ID="(\d+)"', console) if int(i) != NO_FUNCTION) + 1
xml = xml.replace(" </Engine>", efx(fid) + " </Engine>", 1)
# Beside the movers' Strobe, where Strobe 2 sits on the cans' layer.
strobe = re.search(r' <Button Caption="Strobe" ID="89" Icon="">\n.*? </Button>\n', xml, re.S).group(0)
xml = xml.replace(strobe, strobe + button(wid, "Wander", 100, 100, 90, fid, note(45)), 1)
SHOW.write_text(xml)
print(f"Added the movers wander to {SHOW.relative_to(ROOT)} (function {fid}, widget {wid})")
if __name__ == "__main__":
main()