Put the movers' Wander and Ballyhoo speed on knob 13 in the test show.

A Movers speed dial on knob 13 (CC 42), beside the cans' Speed dial, sets
how long Wander takes to go round and gives Ballyhoo an eighth of it
(scripts/shows/mover_speed.py).

QLC+ 4.12 counts an EFX's fade-in inside every round, so Wander has been
taking 22 s and Ballyhoo 2.5 s, not 24 s and 3 s. The dial keeps those as
its starting point and runs from 62 s and 7.5 s fully left to 10 s and 1 s
fully right. The fade-ins stay, so the movers don't jump when either starts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
jimmyandClaude Opus 5.5 committed 2026-10-23 01:46:27 +13:00
1 parent ae186c51ea
commit 09aab70bd6
4 files changed
+85 -4

No files matched your search

+3 -2
View File
@@ -5,10 +5,11 @@ On the movers layer (Pause on), pad 10 toggles a slow relative EFX that drifts
all four movers around wherever the Pan and Tilt knobs (9 and 10, CC 38 and 39)
put them, so turning the knobs moves the middle of the wander:
93 Wander a Lissajous about ±30° of pan and ±10° of tilt, 24 s round
93 Wander a Lissajous about ±30° of pan and ±10° of tilt, 22 s round
Each mover starts a quarter of the way further round, so they don't move as one.
It fades in over 2 s, so the movers ease off the knob position. QLC+ 4.12 leaves
It fades in over 2 s, so the movers ease off the knob position. QLC+ counts the
fade-in inside each 24 s round, which leaves 22 s. QLC+ 4.12 leaves
a relative EFX's last offset on the movers when it stops (with or without a
fade-out), so the pad controller nudges the two knobs when Wander goes off
(padcontroller/layer.py).