Put the movers' Wander and Ballyhoo speed on knob 13 in the test show.

A Movers speed dial on knob 13 (CC 42), beside the cans' Speed dial, sets
how long Wander takes to go round and gives Ballyhoo an eighth of it
(scripts/shows/mover_speed.py).

QLC+ 4.12 counts an EFX's fade-in inside every round, so Wander has been
taking 22 s and Ballyhoo 2.5 s, not 24 s and 3 s. The dial keeps those as
its starting point and runs from 62 s and 7.5 s fully left to 10 s and 1 s
fully right. The fade-ins stay, so the movers don't jump when either starts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
jimmyandClaude Opus 5.5 committed 2026-10-23 01:46:27 +13:00
1 parent ae186c51ea
commit 09aab70bd6
4 files changed
+85 -4

No files matched your search

+2 -2
View File
@@ -5,11 +5,11 @@ On the movers layer (Pause on), pad 11 toggles a fast, wide figure of eight
around wherever the Pan and Tilt knobs (9 and 10, CC 38 and 39) put the movers,
as Wander does:
94 Ballyhoo an Eight about ±85° of pan and ±26° of tilt, 3 s round
94 Ballyhoo an Eight about ±85° of pan and ±26° of tilt, 2.5 s round
All four start together. M1 and M4 turn the other way to M2 and M3, so the
same move mirrors left to right and front to back, and the beams sweep out
and cross in the middle together. It fades in over 0.5 s. When it goes off,
and cross in the middle together. It fades in over 0.5 s, which QLC+ counts inside each 3 s round. When it goes off,
the pad controller nudges the two knobs so QLC+ drops its last offset
(padcontroller/layer.py).