Jimmy
5094c7bcee
Bring the five-panel hex portal online with a browser 3D/schematic preview, Pi SPI backends, and renamed multi-panel Pico UDP firmware. Co-authored-by: Cursor <cursoragent@cursor.com>
45 lines
1.2 KiB
Plaintext
45 lines
1.2 KiB
Plaintext
;
|
|
; WS2812 PIO — from https://github.com/ForsakenNGS/Pico_WS2812
|
|
;
|
|
.program ws2812
|
|
.side_set 1
|
|
|
|
.define public T1 2
|
|
.define public T2 5
|
|
.define public T3 3
|
|
|
|
.lang_opt python sideset_init = pico.PIO.OUT_HIGH
|
|
.lang_opt python out_init = pico.PIO.OUT_HIGH
|
|
.lang_opt python out_shiftdir = 1
|
|
|
|
.wrap_target
|
|
bitloop:
|
|
out x, 1 side 0 [T3 - 1]
|
|
jmp !x send_zero side 1 [T1 - 1]
|
|
send_one:
|
|
jmp bitloop side 1 [T2 - 1]
|
|
send_zero:
|
|
nop side 0 [T2 - 1]
|
|
.wrap
|
|
|
|
% c-sdk {
|
|
#include "hardware/clocks.h"
|
|
|
|
static inline void ws2812_program_init(PIO pio, uint sm, uint offset, uint pin, float freq, uint bits) {
|
|
pio_gpio_init(pio, pin);
|
|
pio_sm_set_consecutive_pindirs(pio, sm, pin, 1, true);
|
|
|
|
pio_sm_config c = ws2812_program_get_default_config(offset);
|
|
sm_config_set_sideset_pins(&c, pin);
|
|
sm_config_set_out_shift(&c, false, true, bits);
|
|
sm_config_set_fifo_join(&c, PIO_FIFO_JOIN_TX);
|
|
|
|
int cycles_per_bit = ws2812_T1 + ws2812_T2 + ws2812_T3;
|
|
float div = (float)clock_get_hz(clk_sys) / (freq * (float)cycles_per_bit);
|
|
sm_config_set_clkdiv(&c, div);
|
|
|
|
pio_sm_init(pio, sm, offset, &c);
|
|
pio_sm_set_enabled(pio, sm, true);
|
|
}
|
|
%}
|