- Driver acks each completed DDP frame; the test waits for the acks before broadcasting the sync. - Sync listener on UDP 4049: a frame is held until the next sync, then shown. - DDP pixels are shown at full brightness, ignoring the device brightness settings. - "DDP and sync receive on" setting (NVS, network API, web UI); off ignores DDP and sync packets. - ddp_test.py: finds devices on the subnet, drives them in lockstep at a fixed rate, runs animations. - /api/ddp reports sync counters for diagnosis. - Includes in-progress WebSocket, multi-driver web UI and Wi-Fi work from the same tree. Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
219 lines
7.9 KiB
Plaintext
219 lines
7.9 KiB
Plaintext
menu "mDNS"
|
||
|
||
config MDNS_MAX_INTERFACES
|
||
int "Max number of interfaces"
|
||
range 1 9
|
||
default 3
|
||
help
|
||
Number of network interfaces to be served by the mDNS library.
|
||
Lowering this number helps to reduce some static RAM usage.
|
||
|
||
config MDNS_MAX_SERVICES
|
||
int "Max number of services"
|
||
default 10
|
||
help
|
||
Services take up a certain amount of memory, and allowing fewer
|
||
services to be open at the same time conserves memory. Specify
|
||
the maximum amount of services here.
|
||
|
||
config MDNS_TASK_PRIORITY
|
||
int "mDNS task priority"
|
||
range 1 255
|
||
default 1
|
||
help
|
||
Allows setting mDNS task priority. Please do not set the task priority
|
||
higher than priorities of system tasks. Compile time warning/error
|
||
would be emitted if the chosen task priority were too high.
|
||
|
||
config MDNS_ACTION_QUEUE_LEN
|
||
int "Maximum actions pending to the server"
|
||
range 8 64
|
||
default 16
|
||
help
|
||
Allows setting the length of mDNS action queue.
|
||
|
||
config MDNS_TASK_STACK_SIZE
|
||
int "mDNS task stack size"
|
||
default 4096
|
||
help
|
||
Allows setting mDNS task stacksize.
|
||
|
||
choice MDNS_TASK_AFFINITY
|
||
prompt "mDNS task affinity"
|
||
default MDNS_TASK_AFFINITY_CPU0
|
||
help
|
||
Allows setting mDNS tasks affinity, i.e. whether the task is pinned to
|
||
CPU0, pinned to CPU1, or allowed to run on any CPU.
|
||
|
||
config MDNS_TASK_AFFINITY_NO_AFFINITY
|
||
bool "No affinity"
|
||
config MDNS_TASK_AFFINITY_CPU0
|
||
bool "CPU0"
|
||
config MDNS_TASK_AFFINITY_CPU1
|
||
bool "CPU1"
|
||
depends on !FREERTOS_UNICORE
|
||
|
||
endchoice
|
||
|
||
config MDNS_TASK_AFFINITY
|
||
hex
|
||
default FREERTOS_NO_AFFINITY if MDNS_TASK_AFFINITY_NO_AFFINITY
|
||
default 0x0 if MDNS_TASK_AFFINITY_CPU0
|
||
default 0x1 if MDNS_TASK_AFFINITY_CPU1
|
||
|
||
menu "MDNS Memory Configuration"
|
||
|
||
choice MDNS_TASK_MEMORY_ALLOC_FROM
|
||
prompt "Select mDNS task create on which type of memory"
|
||
default MDNS_TASK_CREATE_FROM_INTERNAL
|
||
config MDNS_TASK_CREATE_FROM_SPIRAM
|
||
bool "mDNS task creates on the SPIRAM (READ HELP)"
|
||
depends on (SPIRAM_USE_CAPS_ALLOC || SPIRAM_USE_MALLOC)
|
||
help
|
||
mDNS task creates on the SPIRAM.
|
||
This option requires FreeRTOS component to allow creating
|
||
tasks on the external memory.
|
||
Please read the documentation about FREERTOS_TASK_CREATE_ALLOW_EXT_MEM
|
||
|
||
config MDNS_TASK_CREATE_FROM_INTERNAL
|
||
bool "mDNS task creates on the internal RAM"
|
||
|
||
endchoice
|
||
|
||
choice MDNS_MEMORY_ALLOC_FROM
|
||
prompt "Select mDNS memory allocation type"
|
||
default MDNS_MEMORY_ALLOC_INTERNAL
|
||
|
||
config MDNS_MEMORY_ALLOC_SPIRAM
|
||
bool "Allocate mDNS memory from SPIRAM"
|
||
depends on (SPIRAM_USE_CAPS_ALLOC || SPIRAM_USE_MALLOC)
|
||
|
||
config MDNS_MEMORY_ALLOC_INTERNAL
|
||
bool "Allocate mDNS memory from internal RAM"
|
||
|
||
endchoice
|
||
|
||
config MDNS_MEMORY_CUSTOM_IMPL
|
||
bool "Implement custom memory functions"
|
||
default n
|
||
help
|
||
Enable to implement custom memory functions for mDNS library.
|
||
This option is useful when the application wants to use custom
|
||
memory allocation functions for mDNS library.
|
||
|
||
endmenu # MDNS Memory Configuration
|
||
|
||
config MDNS_SERVICE_ADD_TIMEOUT_MS
|
||
int "mDNS adding service timeout (ms)"
|
||
range 10 30000
|
||
default 2000
|
||
help
|
||
Configures timeout for adding a new mDNS service. Adding a service
|
||
fails if could not be completed within this time.
|
||
|
||
config MDNS_TIMER_PERIOD_MS
|
||
int "mDNS timer period (ms)"
|
||
range 10 10000
|
||
default 100
|
||
help
|
||
Configures period of mDNS timer, which periodically transmits packets
|
||
and schedules mDNS searches.
|
||
|
||
config MDNS_NETWORKING_SOCKET
|
||
bool "Use BSD sockets for mDNS networking"
|
||
default n
|
||
help
|
||
Enables optional mDNS networking implementation using BSD sockets
|
||
in UDP multicast mode.
|
||
This option creates a new thread to serve receiving packets (TODO).
|
||
This option uses additional N sockets, where N is number of interfaces.
|
||
|
||
config MDNS_SKIP_SUPPRESSING_OWN_QUERIES
|
||
bool "Skip suppressing our own packets"
|
||
default n
|
||
help
|
||
Enable only if the querier and the responder share the same IP address.
|
||
This usually happens in test mode, where we may run multiple instances of
|
||
responders/queriers on the same interface.
|
||
|
||
config MDNS_ENABLE_DEBUG_PRINTS
|
||
bool "Enable debug prints of mDNS packets"
|
||
default n
|
||
help
|
||
Enable for the library to log received and sent mDNS packets to stdout.
|
||
|
||
config MDNS_DEBUG_USE_ESP_LOG
|
||
bool "Route debug prints to ESP_LOG"
|
||
depends on MDNS_ENABLE_DEBUG_PRINTS
|
||
default y
|
||
help
|
||
Enable this option to route debug prints to ESP_LOG, which allows more flexibility.
|
||
|
||
config MDNS_DEBUG_BUFFER_SIZE
|
||
int "Size of temporary buffer for debug prints"
|
||
depends on MDNS_DEBUG_USE_ESP_LOG
|
||
default 1024
|
||
help
|
||
This buffer is used to output mDNS packets in debug prints.
|
||
|
||
config MDNS_ENABLE_CONSOLE_CLI
|
||
bool "Enable Command Line Interface on device console"
|
||
default y
|
||
help
|
||
Enable for the console cli to be available on the device.
|
||
When disabled, mdns does not depend on the console component at all.
|
||
With the IDF build system v1 the console component has to be part
|
||
of the build when this is enabled; projects that trim the component
|
||
list (COMPONENTS, EXCLUDE_COMPONENTS or MINIMAL_BUILD) need to
|
||
include it or disable this option. With build system v2 mdns
|
||
requires console itself when this is enabled.
|
||
|
||
config MDNS_ENABLE_BROWSE
|
||
bool "Enable mDNS browse (daemon service discovery)"
|
||
default y
|
||
help
|
||
Enable continuous browse APIs (mdns_browse_new / mdns_browse_delete)
|
||
and the related receive/send paths. Disable to save ~3–4 KB of flash
|
||
when the application only advertises services or uses one-shot queries.
|
||
|
||
config MDNS_RESPOND_REVERSE_QUERIES
|
||
bool "Enable responding to IPv4 reverse queries"
|
||
default n
|
||
help
|
||
Enables support for IPv4 reverse lookup. If enabled, the mDNS library
|
||
response to PTR queries of "A.B.C.D.in-addr.arpa" type.
|
||
|
||
config MDNS_MULTIPLE_INSTANCE
|
||
bool "Multiple instances under the same service type"
|
||
default y
|
||
help
|
||
Enables adding multiple service instances under the same service type.
|
||
|
||
menu "MDNS Predefined interfaces"
|
||
|
||
config MDNS_PREDEF_NETIF_STA
|
||
bool "Use predefined interface for WiFi Station"
|
||
default y
|
||
help
|
||
Set up mDNS for the default WiFi station.
|
||
Disable this option if you do not need mDNS on default WiFi STA.
|
||
|
||
config MDNS_PREDEF_NETIF_AP
|
||
bool "Use predefined interface for WiFi Access Point"
|
||
default y
|
||
help
|
||
Set up mDNS for the default WiFi Access Point.
|
||
Disable this option if you do not need mDNS on default WiFi AP.
|
||
|
||
config MDNS_PREDEF_NETIF_ETH
|
||
bool "Use predefined interface for Ethernet"
|
||
depends on ETH_ENABLED
|
||
default y
|
||
help
|
||
Set up mDNS for the default Ethernet interface.
|
||
Disable this option if you do not need mDNS on default Ethernet.
|
||
|
||
endmenu # MDNS Predefined interfaces
|
||
|
||
endmenu
|