Files
led-driver/main/settings.h
T
jimmyandClaude Haiku 5.5 4cd3bc7973 feat: DDP frame sync over UDP broadcast, DDP acks, DDP enable setting
- Driver acks each completed DDP frame; the test waits for the acks before broadcasting the sync.
- Sync listener on UDP 4049: a frame is held until the next sync, then shown.
- DDP pixels are shown at full brightness, ignoring the device brightness settings.
- "DDP and sync receive on" setting (NVS, network API, web UI); off ignores DDP and sync packets.
- ddp_test.py: finds devices on the subnet, drives them in lockstep at a fixed rate, runs animations.
- /api/ddp reports sync counters for diagnosis.
- Includes in-progress WebSocket, multi-driver web UI and Wi-Fi work from the same tree.

Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
2026-11-11 14:10:55 +13:00

52 lines
1.7 KiB
C

/*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <stdbool.h>
#include "esp_err.h"
struct wifi_creds_t {
char ssid[33];
char pass[65];
};
struct net_cfg_t {
char hostname[64]; // mDNS name, without ".local"
bool use_static; // false: DHCP on the client interface
char ip[16]; // static client address, dotted quad
char netmask[16];
char gateway[16];
char dns[16]; // optional; empty uses the gateway
bool ap_enabled; // the access point (led-XXXXXX) is on; default on
bool ddp_enabled; // DDP pixels and frame sync are received; default on
};
/** @brief Read saved Wi-Fi client credentials. ESP_ERR_NVS_NOT_FOUND if none are saved. */
esp_err_t settings_load_wifi(wifi_creds_t *c);
/** @brief Save Wi-Fi client credentials to NVS. */
esp_err_t settings_save_wifi(const wifi_creds_t *c);
struct hw_cfg_t {
char order[4]; // colour order of the strip: rgb, rbg, grb, gbr, brg or bgr
uint8_t max_brightness; // ceiling for every output colour, 0-255
int num_leds; // 1-512
int pin; // GPIO for the data line
uint8_t global_brightness; // this device's own brightness, 0-255 (under max_brightness)
uint8_t master_brightness; // master scale for this device, 0-255, set from "All devices"
};
/** @brief Read the LED strip settings. Missing keys get their defaults (grb, 255, 119). */
esp_err_t settings_load_hw(hw_cfg_t *c);
/** @brief Save the LED strip settings. */
esp_err_t settings_save_hw(const hw_cfg_t *c);
/** @brief Read network settings. Missing keys get their defaults (hostname "led", DHCP). */
esp_err_t settings_load_net(net_cfg_t *c);
/** @brief Save network settings to NVS. */
esp_err_t settings_save_net(const net_cfg_t *c);