Files
led-driver/managed_components/espressif__mdns/Kconfig
T
jimmyandClaude Haiku 5.5 4cd3bc7973 feat: DDP frame sync over UDP broadcast, DDP acks, DDP enable setting
- Driver acks each completed DDP frame; the test waits for the acks before broadcasting the sync.
- Sync listener on UDP 4049: a frame is held until the next sync, then shown.
- DDP pixels are shown at full brightness, ignoring the device brightness settings.
- "DDP and sync receive on" setting (NVS, network API, web UI); off ignores DDP and sync packets.
- ddp_test.py: finds devices on the subnet, drives them in lockstep at a fixed rate, runs animations.
- /api/ddp reports sync counters for diagnosis.
- Includes in-progress WebSocket, multi-driver web UI and Wi-Fi work from the same tree.

Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
2026-11-11 14:10:55 +13:00

219 lines
7.9 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
menu "mDNS"
config MDNS_MAX_INTERFACES
int "Max number of interfaces"
range 1 9
default 3
help
Number of network interfaces to be served by the mDNS library.
Lowering this number helps to reduce some static RAM usage.
config MDNS_MAX_SERVICES
int "Max number of services"
default 10
help
Services take up a certain amount of memory, and allowing fewer
services to be open at the same time conserves memory. Specify
the maximum amount of services here.
config MDNS_TASK_PRIORITY
int "mDNS task priority"
range 1 255
default 1
help
Allows setting mDNS task priority. Please do not set the task priority
higher than priorities of system tasks. Compile time warning/error
would be emitted if the chosen task priority were too high.
config MDNS_ACTION_QUEUE_LEN
int "Maximum actions pending to the server"
range 8 64
default 16
help
Allows setting the length of mDNS action queue.
config MDNS_TASK_STACK_SIZE
int "mDNS task stack size"
default 4096
help
Allows setting mDNS task stacksize.
choice MDNS_TASK_AFFINITY
prompt "mDNS task affinity"
default MDNS_TASK_AFFINITY_CPU0
help
Allows setting mDNS tasks affinity, i.e. whether the task is pinned to
CPU0, pinned to CPU1, or allowed to run on any CPU.
config MDNS_TASK_AFFINITY_NO_AFFINITY
bool "No affinity"
config MDNS_TASK_AFFINITY_CPU0
bool "CPU0"
config MDNS_TASK_AFFINITY_CPU1
bool "CPU1"
depends on !FREERTOS_UNICORE
endchoice
config MDNS_TASK_AFFINITY
hex
default FREERTOS_NO_AFFINITY if MDNS_TASK_AFFINITY_NO_AFFINITY
default 0x0 if MDNS_TASK_AFFINITY_CPU0
default 0x1 if MDNS_TASK_AFFINITY_CPU1
menu "MDNS Memory Configuration"
choice MDNS_TASK_MEMORY_ALLOC_FROM
prompt "Select mDNS task create on which type of memory"
default MDNS_TASK_CREATE_FROM_INTERNAL
config MDNS_TASK_CREATE_FROM_SPIRAM
bool "mDNS task creates on the SPIRAM (READ HELP)"
depends on (SPIRAM_USE_CAPS_ALLOC || SPIRAM_USE_MALLOC)
help
mDNS task creates on the SPIRAM.
This option requires FreeRTOS component to allow creating
tasks on the external memory.
Please read the documentation about FREERTOS_TASK_CREATE_ALLOW_EXT_MEM
config MDNS_TASK_CREATE_FROM_INTERNAL
bool "mDNS task creates on the internal RAM"
endchoice
choice MDNS_MEMORY_ALLOC_FROM
prompt "Select mDNS memory allocation type"
default MDNS_MEMORY_ALLOC_INTERNAL
config MDNS_MEMORY_ALLOC_SPIRAM
bool "Allocate mDNS memory from SPIRAM"
depends on (SPIRAM_USE_CAPS_ALLOC || SPIRAM_USE_MALLOC)
config MDNS_MEMORY_ALLOC_INTERNAL
bool "Allocate mDNS memory from internal RAM"
endchoice
config MDNS_MEMORY_CUSTOM_IMPL
bool "Implement custom memory functions"
default n
help
Enable to implement custom memory functions for mDNS library.
This option is useful when the application wants to use custom
memory allocation functions for mDNS library.
endmenu # MDNS Memory Configuration
config MDNS_SERVICE_ADD_TIMEOUT_MS
int "mDNS adding service timeout (ms)"
range 10 30000
default 2000
help
Configures timeout for adding a new mDNS service. Adding a service
fails if could not be completed within this time.
config MDNS_TIMER_PERIOD_MS
int "mDNS timer period (ms)"
range 10 10000
default 100
help
Configures period of mDNS timer, which periodically transmits packets
and schedules mDNS searches.
config MDNS_NETWORKING_SOCKET
bool "Use BSD sockets for mDNS networking"
default n
help
Enables optional mDNS networking implementation using BSD sockets
in UDP multicast mode.
This option creates a new thread to serve receiving packets (TODO).
This option uses additional N sockets, where N is number of interfaces.
config MDNS_SKIP_SUPPRESSING_OWN_QUERIES
bool "Skip suppressing our own packets"
default n
help
Enable only if the querier and the responder share the same IP address.
This usually happens in test mode, where we may run multiple instances of
responders/queriers on the same interface.
config MDNS_ENABLE_DEBUG_PRINTS
bool "Enable debug prints of mDNS packets"
default n
help
Enable for the library to log received and sent mDNS packets to stdout.
config MDNS_DEBUG_USE_ESP_LOG
bool "Route debug prints to ESP_LOG"
depends on MDNS_ENABLE_DEBUG_PRINTS
default y
help
Enable this option to route debug prints to ESP_LOG, which allows more flexibility.
config MDNS_DEBUG_BUFFER_SIZE
int "Size of temporary buffer for debug prints"
depends on MDNS_DEBUG_USE_ESP_LOG
default 1024
help
This buffer is used to output mDNS packets in debug prints.
config MDNS_ENABLE_CONSOLE_CLI
bool "Enable Command Line Interface on device console"
default y
help
Enable for the console cli to be available on the device.
When disabled, mdns does not depend on the console component at all.
With the IDF build system v1 the console component has to be part
of the build when this is enabled; projects that trim the component
list (COMPONENTS, EXCLUDE_COMPONENTS or MINIMAL_BUILD) need to
include it or disable this option. With build system v2 mdns
requires console itself when this is enabled.
config MDNS_ENABLE_BROWSE
bool "Enable mDNS browse (daemon service discovery)"
default y
help
Enable continuous browse APIs (mdns_browse_new / mdns_browse_delete)
and the related receive/send paths. Disable to save ~3–4 KB of flash
when the application only advertises services or uses one-shot queries.
config MDNS_RESPOND_REVERSE_QUERIES
bool "Enable responding to IPv4 reverse queries"
default n
help
Enables support for IPv4 reverse lookup. If enabled, the mDNS library
response to PTR queries of "A.B.C.D.in-addr.arpa" type.
config MDNS_MULTIPLE_INSTANCE
bool "Multiple instances under the same service type"
default y
help
Enables adding multiple service instances under the same service type.
menu "MDNS Predefined interfaces"
config MDNS_PREDEF_NETIF_STA
bool "Use predefined interface for WiFi Station"
default y
help
Set up mDNS for the default WiFi station.
Disable this option if you do not need mDNS on default WiFi STA.
config MDNS_PREDEF_NETIF_AP
bool "Use predefined interface for WiFi Access Point"
default y
help
Set up mDNS for the default WiFi Access Point.
Disable this option if you do not need mDNS on default WiFi AP.
config MDNS_PREDEF_NETIF_ETH
bool "Use predefined interface for Ethernet"
depends on ETH_ENABLED
default y
help
Set up mDNS for the default Ethernet interface.
Disable this option if you do not need mDNS on default Ethernet.
endmenu # MDNS Predefined interfaces
endmenu