Files
led-driver/main/net.h
T
jimmyandClaude Haiku 5.5 9a04d28ecf feat: web UI with AP, Wi-Fi client, mDNS, presets, OTA and DDP
- Wi-Fi access point led-XXXXXX plus a client network, configurable
  mDNS name and static client address
- Preset tiles with an editor, drag to reorder, default presets,
  global brightness, Run and Edit modes, collapsible menu on phones
- 35 patterns ported from led-driver, up to 512 LEDs, colour order,
  max brightness and data pin settings
- Over-the-air updates (POST /ota) with rollback, and a CLI in tools/ota.py
- DDP receiver on UDP 4048 with tools/ddp_test.py
- LED refresh every 10 ms; lwIP sockets raised to 16 so mDNS, HTTP
  and DDP can run together

Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
2026-11-11 01:54:32 +13:00

33 lines
1015 B
C++

/*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include <cstddef>
#include <cstdint>
#include "esp_err.h"
#include "esp_wifi_types.h"
#include "settings.h"
/** @brief Start Wi-Fi (AP `led-XXXXXX` plus an optional client), and mDNS. Needs NVS. */
esp_err_t net_start(void);
/** @brief Fill buf with the AP SSID, e.g. "led-A1B2C3". */
void net_ap_ssid(char *buf, size_t len);
/** @brief Client link state and its IPv4 address ("" if not connected). */
bool net_sta_status(char *ip, size_t ip_len);
/** @brief Save credentials, then connect the client with them. */
esp_err_t net_sta_connect(const wifi_creds_t *c);
/**
* @brief Save network settings and apply them: mDNS name, static or DHCP client address.
* A connected or configured client reconnects so the new address takes effect.
*/
esp_err_t net_save_network(const net_cfg_t *c);
/** @brief Scan for networks. On entry *count is the array size; on exit, the number found. */
esp_err_t net_scan(wifi_ap_record_t *recs, uint16_t *count);