At 20 MHz the controller intermittently dropped every Ethernet frame over about 900 bytes, while small packets got through. The web UI then hung after the first chunk of a response. At 10 MHz, full-size pings and repeated fetches of every UI file all succeed. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
140 lines
3.4 KiB
Plaintext
140 lines
3.4 KiB
Plaintext
menu "W5500 config"
|
|
|
|
config W5500_SPI_HOST
|
|
int "SPI host number (1=SPI2, 2=SPI3)"
|
|
range 1 2
|
|
default 1
|
|
|
|
config W5500_SPI_CLOCK_MHZ
|
|
int "SPI clock speed (MHz)"
|
|
range 5 80
|
|
default 10
|
|
|
|
config W5500_SCLK_GPIO
|
|
int "SCLK GPIO (XIAO D8)"
|
|
default 7
|
|
|
|
config W5500_MISO_GPIO
|
|
int "MISO GPIO (XIAO D9)"
|
|
default 8
|
|
|
|
config W5500_MOSI_GPIO
|
|
int "MOSI GPIO (XIAO D10)"
|
|
default 9
|
|
|
|
config W5500_CS_GPIO
|
|
int "CS GPIO (XIAO D1)"
|
|
default 2
|
|
|
|
config W5500_INT_GPIO
|
|
int "INT GPIO (XIAO D2), -1 to poll"
|
|
default 3
|
|
|
|
config W5500_POLL_PERIOD_MS
|
|
int "RX poll period (ms) when INT is -1"
|
|
default 10
|
|
|
|
config W5500_RST_GPIO
|
|
int "RST GPIO (XIAO D0), -1 if not wired"
|
|
default 1
|
|
|
|
endmenu
|
|
|
|
menu "INMP441 mic config"
|
|
|
|
config MIC_SCK_GPIO
|
|
int "SCK GPIO (XIAO D4)"
|
|
default 5
|
|
|
|
config MIC_WS_GPIO
|
|
int "WS GPIO (XIAO D5)"
|
|
default 6
|
|
|
|
config MIC_SD_GPIO
|
|
int "SD GPIO (XIAO D6)"
|
|
default 43
|
|
|
|
config MIC_STREAM_GAIN
|
|
int "Digital gain for the audio stream (x)"
|
|
range 1 256
|
|
default 16
|
|
help
|
|
The INMP441 is quiet at full scale; x16 (+24 dB) makes speech
|
|
audible without clipping at normal distances.
|
|
|
|
endmenu
|
|
|
|
menu "Beat detection config"
|
|
|
|
config BEAT_LED_GPIO
|
|
int "Beat LED GPIO (XIAO user LED is 21), -1 for none"
|
|
default 21
|
|
|
|
config BEAT_LED_ACTIVE_LOW
|
|
bool "Beat LED lights when the pin is low"
|
|
default y
|
|
|
|
config BEAT_LED_PULSE_MS
|
|
int "Beat LED flash length (ms)"
|
|
range 10 500
|
|
default 60
|
|
|
|
config BEAT_LED_DOWNBEAT_MS
|
|
int "Beat LED flash length on the first beat of a bar (ms)"
|
|
range 10 1000
|
|
default 200
|
|
|
|
config BEAT_GATE_DBFS
|
|
int "Ignore audio quieter than this (dBFS, before stream gain)"
|
|
range -100 -20
|
|
default -75
|
|
help
|
|
The INMP441 self-noise is about -87 dBFS. Background music in a
|
|
room can sit around -65 dBFS, so keep this well below that.
|
|
|
|
config BEAT_LEAD_MS
|
|
int "Fire predicted beats this early (ms)"
|
|
range 0 200
|
|
default 30
|
|
help
|
|
Beats are predicted from the tempo, so they can be sent early
|
|
to cancel the ~30 ms of capture and analysis latency. Raise it
|
|
to cover output latency too (e.g. network or lights).
|
|
|
|
endmenu
|
|
|
|
menu "ESP-NOW config"
|
|
|
|
config ESPNOW_CHANNEL
|
|
int "Wi-Fi channel shared with the LED drivers"
|
|
range 1 13
|
|
default 6
|
|
|
|
config BEAT_TX_COPIES
|
|
int "Copies sent of every beat frame"
|
|
range 1 4
|
|
default 2
|
|
help
|
|
Each beat is broadcast this many times with the same beat index.
|
|
Drivers act on the first copy that arrives and drop the rest.
|
|
|
|
config BEAT_TX_GAP_US
|
|
int "Gap between beat copies (us)"
|
|
range 500 10000
|
|
default 2000
|
|
|
|
config BEAT_TEST_GPIO
|
|
int "GPIO toggled on every beat sent (-1 = off)"
|
|
range -1 48
|
|
default -1
|
|
help
|
|
For latency measurement: a logic analyzer or scope on this pin and on
|
|
the driver's beat pin shows the true master-to-LED delay.
|
|
|
|
config BULK_HOLDOFF_US
|
|
int "Hold bulk traffic back after a beat (us)"
|
|
range 0 20000
|
|
default 3000
|
|
|
|
endmenu
|