47 Commits
Author SHA1 Message Date
jimmyandClaude Sonnet 5.5 71bd320661 feat(v2): move web UI into v2, remove legacy MicroPython app
Move the web assets and templates under v2/web, drop the old src/, lib/
and scripts, and update firmware, tools, docs and db files. Add the audio
page, LED test scripts and VPN autoconnect script.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-11-02 20:30:02 +13:00
jimmyandClaude Sonnet 5.5 6c16998691 feat(v2): OTA firmware update over Ethernet
POST /ota writes the image to the idle app slot and reboots; GET /ota
reports the running slot. App rollback is enabled, and a new image confirms
itself after 10 s. Adds make ota HOST=<ip>, tools/ota.py and the led-tool
--ota update.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-11-01 00:22:55 +13:00
jimmyandClaude Sonnet 5.5 8d78af1246 docs(v2): bench guide results for the loss, beat, USB and C3 tests
Adds the audio endpoints, the Makefile pointer, the first-run results of
the lossy-link and beat tests, the USB and analyzer latency methods and the
ESP32-C3 comparison (delivery, latency, frame rate, Wi-Fi start-up order).

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 22:30:26 +13:00
jimmyandClaude Sonnet 5.5 899d4f2418 build(v2): root Makefile for build, flash and monitor
make build / flash / monitor / flash-monitor / log / size / menuconfig /
erase / clean / test run ESP-IDF in Docker and handle rootless ownership.
Adds the helper scripts behind log and test, and a --settle option for
usb_latency.py (an ESP32-C3 driver resets when its port is opened).

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 22:30:26 +13:00
jimmyandClaude Sonnet 5.5 f7ac4ab290 feat(v2): audio page, beat endpoints and an Audio menu button
Restores the live audio section from esp32-eth: /audio page, /audio.wav
stream, /beats event feed, POST /tap and /time, and the mic and beat state
in /status. The web build adds an Audio entry to the header menu and the
mobile dropdown for the v2 copy of index.html only, so the Pi UI is unchanged.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 22:30:26 +13:00
jimmyandClaude Sonnet 5.5 d332d447aa fix(v2): do not wipe a driver's groups when it announces and is in no zone
The controller sent a GROUPS packet on every driver hello. For a driver in
no zone that was an empty list, which replaced the groups stored on the
driver. It is now sent at announce and resync only when the list is not
empty; explicit zone and device edits still send every list.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 22:30:26 +13:00
jimmyandClaude Sonnet 5.5 a94d6a7de5 feat(v2): ESP32-S3 controller with Ethernet, I2S mic beat detection and ESP-NOW
New ESP-IDF project in v2/ that replaces the Pi and the UART bridge:

- W5500 Ethernet, INMP441 beat/tempo detector (from esp32-eth), ESP-NOW master
- LittleFS data store and a JSON API over the Pi's db/*.json collections,
  with /db import and export; web UI minified and gzipped at build time
- Zone play/stop as 0x4C GROUP_CMD, preset push/send as CMD (binary v2
  envelope, byte-identical to src/util/binary_envelope.py), sequencer and
  scenes, driver registration from the boot hello
- Reliable bulk link: acks with retransmit, fragments, state-version digest
  and resync; beat frames sent twice with a lead so drivers fire together
- Bench tooling: lossy-link mode, synthetic beats with echo measurement,
  USB and logic-analyzer latency scripts, and docs/BENCH_TEST.md

Needs the matching led-driver changes (p2p branch) to receive the link and
beat frames.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 17:15:28 +13:00
jimmyandClaude Sonnet 5.5 7336c7fb22 docs: document engine, outputs, sequences, brightness and search; update spec
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:02:13 +13:00
jimmyandClaude Opus 5.5 3a7723c586 feat(ui): add search filter to devices, zones and presets modals
Client-side filter that hides non-matching rows as you type, persists
across list re-renders, and clears when the modal is reopened or on Esc.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 14:11:55 +13:00
jimmyandClaude Opus 5.5 a5a7fc575f feat(engine): Pi-side animation engine with protocol outputs and sequencer
Add src/engine, modelled on technicalkiwi/portal's player and sequence runner:

- Pixel generator: runs the unchanged led-driver patterns under CPython
  (utime shim + NeoPixel-like buffer) on a per-zone render thread and
  streams frames to pixel outputs, with keepalive for static frames.
- Output drivers: DDP, Art-Net (ArtDMX/ArtSync), sACN/E1.31, USB-DMX
  (Enttec Pro / Open DMX), plus an ESP32 preset output that reuses the
  existing preset + select delivery path. Registry in db/output.json,
  CRUD and test pattern at /outputs.
- Sequencer: timed preset chains per zone (portal step shape), deadline
  scheduling, loop/repeat, resume after restart; legacy sequence records
  are migrated. Zone play/stop, sequence and scene play/stop endpoints.
- CLI (python -m engine.cli), Outputs and Sequences modals, preset tiles
  drive pixel outputs, API/README docs, engine test suite.

ESP32 firmware is unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 13:24:14 +13:00
piandCursor 827eb97203 feat(settings): server global brightness and Wi-Fi driver resync
- Serve GET /settings as JSON by removing duplicate HTML route (use /settings/page for the standalone UI).

- Save global_brightness via PUT; broadcast to connected drivers; push saved level when outbound WS connects.

- Zones UI loads brightness from GET /settings only (no localStorage).

- Bump led-driver submodule for settings.save on brightness with save flag.

- Extend API doc and endpoint tests for global_brightness.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 22:15:30 +12:00
piandCursor 3cca0cffc5 chore: bump led-tool and led-driver submodules
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 21:27:32 +12:00
piandCursor d36828bde2 feat(ui): persist header brightness slider in localStorage
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 21:27:31 +12:00
piandCursor ed0048c795 chore(service): avoid network-online stall and speed pipenv boot
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 21:27:31 +12:00
piandCursor b316edbaf9 fix(wifi): stagger driver ws dials and extend initial retry window
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 21:27:31 +12:00
jimmyandCursor c1b0c41ef2 fix(transport): disable UART ESP-NOW bridge by default
Require serial_enabled true in settings to open serial_port; default false in
set_defaults for Wi-Fi-only and dev machines.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 15:07:16 +12:00
jimmyandCursor 3bb75d49de feat(util): add binary envelope packing and message helpers
Includes tests for v1/v2 envelope round-trips.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 14:56:37 +12:00
jimmyandCursor 3d77cb448a chore: add vertical stand OpenSCAD model
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 14:56:35 +12:00
jimmyandCursor 49383c0003 feat(espnow): add espnow-sender utility
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 14:56:35 +12:00
jimmyandCursor 7d821b9c1c chore(db): add local preset fixtures
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 14:56:35 +12:00
jimmyandCursor 9b7e387ea6 chore(scripts): add dev-run helper
Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 14:56:34 +12:00
jimmyandCursor b4f0d1891e chore(submodule): bump led-driver and led-tool; register led-simulator
led-simulator was already a gitlink; add the missing .gitmodules entry.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 14:56:30 +12:00
jimmy 0da30b6d6b fix(submodule): update led-tool pointer to existing commit 2026-04-30 23:28:39 +12:00
jimmy 6cbb728d9a feat(patterns): add new pattern suite and improve mobile controls
Add a broad set of LED patterns with metadata/tests and update zone/profile preset seeding, while refining mobile/desktop UI behavior for scrolling, brightness controls, and bulk pattern sending.
2026-04-23 20:07:55 +12:00
jimmy ff92451a76 feat(profiles): seed twinkle preset defaults
Made-with: Cursor
2026-04-21 20:43:25 +12:00
jimmy 60485bc06a feat(ui): add clear device presets action
Made-with: Cursor
2026-04-21 00:44:38 +12:00
jimmy f6f299c3e5 feat(presets): add radiate pattern defaults
Made-with: Cursor
2026-04-20 23:38:02 +12:00
jimmy 66485f5c59 chore(led-driver): bump submodule for patterns and tests
Made-with: Cursor
2026-04-19 23:28:22 +12:00
jimmy 5f9ff9bcc9 style(ui): presets patterns and layout tweaks
Made-with: Cursor
2026-04-19 23:28:08 +12:00
jimmy 35730b36f0 feat(api): improve pattern deploy and device tcp handling
Made-with: Cursor
2026-04-19 23:28:01 +12:00
jimmy d516833cc3 feat(profiles): seed colour cycle flicker and flame presets
Made-with: Cursor
2026-04-19 23:27:57 +12:00
jimmy 220be64dec feat(db): add flicker flame presets and pattern metadata
Made-with: Cursor
2026-04-19 23:27:49 +12:00
jimmy b433477c64 chore(db): trim device registry
Made-with: Cursor
2026-04-19 23:27:37 +12:00
jimmy 43b7047c57 chore(submodule): bump led-tool for cli upload flags
Made-with: Cursor
2026-04-15 00:46:40 +12:00
jimmy 167417d1ec feat(ui): add web led-tool usb controls
Made-with: Cursor
2026-04-15 00:46:31 +12:00
jimmy fb8141b320 fix(server): close http listener cleanly on shutdown 2026-04-15 00:00:23 +12:00
jimmy 96712dda88 feat(controller): migrate wifi drivers from tcp to websocket clients 2026-04-14 23:13:26 +12:00
jimmy f5a7b42e7c fix(rules): revert unintended submodule changes 2026-04-14 21:54:02 +12:00
jimmy 1b1e9d727e chore(rules): enforce strict user-scoped changes 2026-04-14 21:50:55 +12:00
jimmy 668d29b786 chore(test): move pytest defaults to pyproject.toml
Made-with: Cursor
2026-04-12 02:39:39 +12:00
jimmy e5f42e099e chore: remove esp32 firmware tree and dev mpremote helper
Made-with: Cursor
2026-04-12 02:39:37 +12:00
jimmy a9edda38ef test(browser): fixture, env host and pacing, safer colour inputs
Made-with: Cursor
2026-04-12 02:34:46 +12:00
jimmy edec5ff460 chore(git): ignore pytest cache and ropeproject
Made-with: Cursor
2026-04-12 02:34:44 +12:00
pi 264eb7296f test: fix zone_ctl fixture, pattern assertions, and browser cleanup
Made-with: Cursor
2026-04-12 00:27:43 +12:00
pi fbd4295302 feat(ui): patterns list and create form layout
Made-with: Cursor
2026-04-12 00:13:58 +12:00
pi 7bdb324ebc feat(patterns): driver_patterns helper, on/off ota guard, drop duplicate py tree
Made-with: Cursor
2026-04-12 00:13:56 +12:00
pi 28b19b5219 docs: zones, transports, pattern ota, and submodule readmes
Made-with: Cursor
2026-04-12 00:13:54 +12:00
268 changed files with 14060 additions and 15207 deletions

No files matched your search

+45
View File
@@ -0,0 +1,45 @@
---
description: led-driver — MicroPython ESP32: mpremote, imports, layout, I/O, no pycache in src
globs: led-driver/**
alwaysApply: false
---
# led-driver (MicroPython / ESP32)
## Device and tests
1. Validate **MicroPython behaviour** under **`led-driver/`** with **`mpremote connect <PORT> …`** on the chip. Host **`python3`** does **not** prove the firmware build.
2. **Execution target is fixed:** treat **`led-driver/`** code as firmware that runs **only on MicroPython ESP32 devices**. Do **not** run `led-driver/src/main.py` (or other firmware modules) with host CPython as a normal execution path.
3. **Flow:** `mpremote connect <PORT> cp <local> :<on-flash>` then `run <script>.py`. Inline commands only — no **`.sh`** wrappers unless the user asks. Default serial placeholder: **`/dev/ttyACM0`**.
4. Checks that **import and run** code from **`led-driver/src/`** belong in **`led-driver/tests/`** and run with **`mpremote run …`**. **Do not** add **`pytest`** under **`led-controller/tests/`** that **`sys.path`**-loads **`led-driver/src`** and runs those modules on CPython.
## Import layout
4. **No** **`sys.path.insert`**, **`__file__`** path stitching, or other import-path hacks under **`led-driver/`**. Use device flash search path, or host **`PYTHONPATH`** / layout you control.
5. **No** “import fixer” code — fix copy order, flash paths, or env instead.
## Imports (fail loudly)
6. If a dependency does not load, **crash** and fix deployment or filesystem. **Do not** catch **`ImportError`** / **`ModuleNotFoundError`** around **`import`** / **`from … import`** for app/firmware modules (`settings`, `utils`, `network`, `machine`, …).
7. **Allowed — stdlib name pairs only** (MicroPython vs CPython): one **`except ImportError`**, then **one** fallback import, **no** extra logic in **`except`**:
- `uos` → `os`
- `ubinascii` → `binascii`
- `utime` → `time`
Not for “maybe the file exists on flash” — only different **stdlib** names.
8. **No** large inline reimplementations after **`except ImportError`** — deploy the real module.
## I/O
9. Non-blocking **recv** / **accept**: use plain **`except OSError:`** (or **break** on empty). **No** errno / EAGAIN / EWOULDBLOCK tables or **`getattr(errno, …)`** unless fixing a **documented** target bug.
10. Minimal **`try` / `except OSError`** around optional socket options (e.g. **`SO_REUSEADDR`**) is fine.
## Host Python and `src/`
11. **Do not** leave **`__pycache__/`** or **`.pyc`** under **`led-driver/src/`** from host runs. Remove if created; **`.gitignore`** already ignores it. Prefer **`PYTHONDONTWRITEBYTECODE=1`** or **`-B`** when host Python must touch **`led-driver/src/`**.
+12
View File
@@ -0,0 +1,12 @@
---
description: Require test pattern, pattern metadata, and test preset for new patterns
alwaysApply: true
---
# Pattern workflow requirements
1. When creating a new pattern under `led-driver/src/patterns/`, also add/update a corresponding test file in `led-driver/tests/patterns/`.
2. When adding a new pattern, ensure led-controller has `db/pattern.json`; if it does not exist, create it. Add the new pattern metadata and parameter mappings there.
3. When adding a new pattern, add at least one test preset entry in `db/preset.json` in led-controller that uses the new pattern.
+16
View File
@@ -0,0 +1,16 @@
---
description: enforce strict user-scoped changes only
alwaysApply: true
---
# Strict User Scope
1. Only implement exactly what the user asked for in the current message.
2. Do not add extra refactors, cleanups, renames, architecture changes, or behavioural changes unless the user explicitly asked for them.
3. If a potential improvement is noticed, mention it briefly and ask before changing code.
4. For revert/undo requests, perform the narrowest possible revert and do not modify anything else.
5. Keep edits minimal and local to the requested area.
+5
View File
@@ -1,5 +1,7 @@
# Python
__pycache__/
# led-driver/src is MicroPython source — never keep host __pycache__ there (see .cursor/rules/led-driver.mdc)
led-driver/src/__pycache__/
*.py[cod]
*$py.class
*.so
@@ -23,8 +25,11 @@ ENV/
Thumbs.db
# Project specific
scripts/.led-controller-venv
docs/.help-print.html
settings.json
*.log
*.db
*.sqlite
.pytest_cache/
.ropeproject/
+3
View File
@@ -4,3 +4,6 @@
[submodule "led-tool"]
path = led-tool
url = git@git.technical.kiwi:technicalkiwi/led-tool.git
[submodule "led-simulator"]
path = led-simulator
url = git@git.technical.kiwi:technicalkiwi/led-simulator.git
+98
View File
@@ -0,0 +1,98 @@
# Build, flash and monitor the v2 ESP32-S3 controller (ESP-IDF in Docker).
#
# make list the targets
# make build minify the web UI, then build the firmware
# make flash build if needed and flash the S3
# make monitor serial console (Ctrl-] to quit)
# make flash-monitor
#
# Override on the command line, e.g. make flash PORT=/dev/ttyACM1
PORT ?= /dev/ttyACM0
IDF_IMAGE ?= espressif/idf:v5.5.5
SECS ?= 10
V2 := v2
DOCKER_RUN = docker run --rm -v "$(CURDIR)/$(V2)":/project -w /project
DEVICE = --device=$(PORT)
# Interactive terminal only when there is one (monitor needs it, CI does not have it)
TTY := $(shell [ -t 0 ] && echo -it)
# Rootless Docker maps container root to you, so files must end up owned by uid 0 inside; with a
# normal daemon they must be owned by you.
OWNER := $(shell docker info --format '{{.SecurityOptions}}' 2>/dev/null | grep -q rootless && echo 0:0 || echo $$(id -u):$$(id -g))
FIX_OWNER = chown -R $(OWNER) /project
.PHONY: help web build flash ota monitor flash-monitor log size menuconfig clean fullclean erase test test-driver test-envelope
help:
@echo "v2 controller (ESP32-S3):"
@echo " make build minify + gzip the web UI, then build the firmware"
@echo " make flash flash firmware and web UI to PORT ($(PORT))"
@echo " make ota HOST=ip build, then upload the firmware (web UI included) over Ethernet (no USB)"
@echo " make monitor serial console on PORT (Ctrl-] to quit)"
@echo " make flash-monitor flash, then open the console"
@echo " make log [SECS=10] print the console for SECS seconds and exit (no terminal needed)"
@echo " make web only rebuild the web UI (needs node/npx)"
@echo " make size memory use of the last build"
@echo " make menuconfig change the ESP-NOW channel, marker pin, W5500 pins, ..."
@echo " make erase erase the whole flash (loses the stored data)"
@echo " make clean remove the build directory (keeps sdkconfig)"
@echo " make fullclean also remove sdkconfig and the web UI output"
@echo " make test driver unit tests + C/Python envelope cross-check"
@echo "variables: PORT=$(PORT) IDF_IMAGE=$(IDF_IMAGE)"
# --- web UI ---------------------------------------------------------------
web:
cd $(V2) && tools/build_web.sh
# --- firmware -------------------------------------------------------------
build: web
$(DOCKER_RUN) $(IDF_IMAGE) bash -c 'idf.py build; rc=$$?; $(FIX_OWNER); exit $$rc'
flash: build
$(DOCKER_RUN) $(DEVICE) $(IDF_IMAGE) bash -c 'idf.py -p $(PORT) flash; rc=$$?; $(FIX_OWNER); exit $$rc'
ota: build
@test -n "$(HOST)" || { echo "usage: make ota HOST=<controller ip>"; exit 1; }
python3 $(V2)/tools/ota.py $(HOST)
monitor:
$(DOCKER_RUN) $(TTY) $(DEVICE) $(IDF_IMAGE) idf.py -p $(PORT) monitor
flash-monitor: flash monitor
# Non-interactive: reset the board and print what it says for SECS seconds
log:
python3 $(V2)/tools/serial_log.py $(PORT) $(SECS)
size:
$(DOCKER_RUN) $(IDF_IMAGE) bash -c 'idf.py size; rc=$$?; $(FIX_OWNER); exit $$rc'
menuconfig:
$(DOCKER_RUN) -it $(IDF_IMAGE) bash -c 'idf.py menuconfig; rc=$$?; $(FIX_OWNER); exit $$rc'
erase:
$(DOCKER_RUN) $(DEVICE) $(IDF_IMAGE) idf.py -p $(PORT) erase-flash
clean:
rm -rf $(V2)/build
fullclean: clean
rm -rf $(V2)/sdkconfig $(V2)/sdkconfig.old $(V2)/www_dist
# --- tests ----------------------------------------------------------------
test: test-driver test-envelope
# Host-side unit tests for the driver's link layer and beat sync (pure Python)
test-driver:
python3 $(V2)/tools/run_driver_tests.py
# The C envelope packer must produce the same bytes as v2/test/binary_envelope.py
test-envelope:
@tmp=$$(mktemp -d); \
(cd $(V2)/test && python3 env_check.py) > $$tmp/py.txt; \
docker run --rm -v "$(CURDIR)/$(V2)":/project -w /project/test $(IDF_IMAGE) bash -c \
'gcc -Wall -I/opt/esp/idf/components/json/cJSON env_host.c ../main/envelope.c /opt/esp/idf/components/json/cJSON/cJSON.c -o /tmp/t -lm && /tmp/t' 2>&1 | tail -2 > $$tmp/c.txt; \
if diff -q $$tmp/py.txt $$tmp/c.txt >/dev/null; then echo "envelope: C and Python agree"; rm -rf $$tmp; \
else echo "envelope: MISMATCH"; diff $$tmp/py.txt $$tmp/c.txt; rm -rf $$tmp; exit 1; fi
-29
View File
@@ -1,29 +0,0 @@
[[source]]
url = "https://pypi.org/simple"
verify_ssl = true
name = "pypi"
[packages]
mpremote = "*"
pyserial = "*"
esptool = "*"
pyjwt = "*"
watchfiles = "*"
requests = "*"
selenium = "*"
adafruit-ampy = "*"
microdot = "*"
[dev-packages]
pytest = "*"
[requires]
python_version = "3.12"
[scripts]
web = "python /home/pi/led-controller/tests/web.py"
watch = "python -m watchfiles 'python tests/web.py' src tests"
install = "pipenv install"
run = "sh -c 'cd src && python main.py'"
dev = "watchfiles \"sh -c 'cd src && python main.py'\" src"
help-pdf = "sh scripts/build_help_pdf.sh"
Generated
-958
View File
@@ -1,958 +0,0 @@
{
"_meta": {
"hash": {
"sha256": "6cec0fe6dec67c9177363a558131f333153b6caa47e1ddeca303cb0d19954cf8"
},
"pipfile-spec": 6,
"requires": {
"python_version": "3.12"
},
"sources": [
{
"name": "pypi",
"url": "https://pypi.org/simple",
"verify_ssl": true
}
]
},
"default": {
"adafruit-ampy": {
"hashes": [
"sha256:4a74812226e53c17d01eb828633424bc4f4fe76b9499a7b35eba6fc2532635b7",
"sha256:f4cba36f564096f2aafd173f7fbabb845365cc3bb3f41c37541edf98b58d3976"
],
"index": "pypi",
"version": "==1.1.0"
},
"anyio": {
"hashes": [
"sha256:08b310f9e24a9594186fd75b4f73f4a4152069e3853f1ed8bfbf58369f4ad708",
"sha256:334b70e641fd2221c1505b3890c69882fe4a2df910cba14d97019b90b24439dc"
],
"markers": "python_version >= '3.10'",
"version": "==4.13.0"
},
"attrs": {
"hashes": [
"sha256:c647aa4a12dfbad9333ca4e71fe62ddc36f4e63b2d260a37a8b83d2f043ac309",
"sha256:d03ceb89cb322a8fd706d4fb91940737b6642aa36998fe130a9bc96c985eff32"
],
"markers": "python_version >= '3.9'",
"version": "==26.1.0"
},
"bitarray": {
"hashes": [
"sha256:004d518fa410e6da43386d20e07b576a41eb417ac67abf9f30fa75e125697199",
"sha256:014df8a9430276862392ac5d471697de042367996c49f32d0008585d2c60755a",
"sha256:01c5f0dc080b0ebb432f7a68ee1e88a76bd34f6d89c9568fcec65fb16ed71f0e",
"sha256:025d133bf4ca8cf75f904eeb8ea946228d7c043231866143f31946a6f4dd0bf3",
"sha256:0ca70ccf789446a6dfde40b482ec21d28067172cd1f8efd50d5548159fccad9e",
"sha256:0df69d26f21a9d2f1b20266f6737fa43f08aa5015c99900fb69f255fbe4dabb4",
"sha256:0f8069a807a3e6e3c361ce302ece4bf1c3b49962c1726d1d56587e8f48682861",
"sha256:15a2eff91f54d2b1f573cca8ca6fb58763ce8fea80e7899ab028f3987ef71cd5",
"sha256:15e8d0597cc6e8496de6f4dea2a6880c57e1251502a7072f5631108a1aa28521",
"sha256:165052a0e61c880f7093808a0c524ce1b3555bfa114c0dfb5c809cd07918a60d",
"sha256:178c5a4c7fdfb5cd79e372ae7f675390e670f3732e5bc68d327e01a5b3ff8d55",
"sha256:18214bac86341f1cc413772e66447d6cca10981e2880b70ecaf4e826c04f95e9",
"sha256:1a54d7e7999735faacdcbe8128e30207abc2caf9f9fd7102d180b32f1b78bfce",
"sha256:1a926fa554870642607fd10e66ee25b75fdd9a7ca4bbffa93d424e4ae2bf734a",
"sha256:1c8f2a5d8006db5a555e06f9437e76bf52537d3dfd130cb8ae2b30866aca32c9",
"sha256:21ca6a47bf20db9e7ad74ca04b3d479e4d76109b68333eb23535553d2705339e",
"sha256:22c540ed20167d3dbb1e2d868ca935180247d620c40eace90efa774504a40e3b",
"sha256:239578587b9c29469ab61149dda40a2fe714a6a4eca0f8ff9ea9439ec4b7bc30",
"sha256:25b9cff6c9856bc396232e2f609ea0c5ec1a8a24c500cee4cca96ba8a3cd50b6",
"sha256:26714898eb0d847aac8af94c4441c9cb50387847d0fe6b9fc4217c086cd68b80",
"sha256:28a85b056c0eb7f5d864c0ceef07034117e8ebfca756f50648c71950a568ba11",
"sha256:2a3d1b05ffdd3e95687942ae7b13c63689f85d3f15c39b33329e3cb9ce6c015f",
"sha256:2c3bb96b6026643ce24677650889b09073f60b9860a71765f843c99f9ab38b25",
"sha256:2fa23fdb3beab313950bbb49674e8a161e61449332d3997089fe3944953f1b77",
"sha256:2fe8c54b15a9cd4f93bc2aaceab354ec65af93370aa1496ba2f9c537a4855ee0",
"sha256:30989a2451b693c3f9359d91098a744992b5431a0be4858f1fdf0ec76b457125",
"sha256:31a4ad2b730128e273f1c22300da3e3631f125703e4fee0ac44d385abfb15671",
"sha256:337c8cd46a4c6568d367ed676cbf2d7de16f890bb31dbb54c44c1d6bb6d4a1de",
"sha256:33af25c4ff7723363cb8404dfc2eefeab4110b654f6c98d26aba8a08c745d860",
"sha256:3ea52df96566457735314794422274bd1962066bfb609e7eea9113d70cf04ffe",
"sha256:3eae38daffd77c9621ae80c16932eea3fb3a4af141fb7cc724d4ad93eff9210d",
"sha256:41b53711f89008ba2de62e4c2d2260a8b357072fd4f18e1351b28955db2719dc",
"sha256:451f9958850ea98440d542278368c8d1e1ea821e2494b204570ba34a340759df",
"sha256:46cf239856b87fe1c86dfbb3d459d840a8b1649e7922b1e0bfb6b6464692644a",
"sha256:4779f356083c62e29b4198d290b7b17a39a69702d150678b7efff0fdddf494a8",
"sha256:4902f4ecd5fcb6a5f482d7b0ae1c16c21f26fc5279b3b6127363d13ad8e7a9d9",
"sha256:4d73d4948dcc5591d880db8933004e01f1dd2296df9de815354d53469beb26fe",
"sha256:4d9984017314da772f5f7460add7a0301a4ffc06c72c2998bb16c300a6253607",
"sha256:4f298daaaea58d45e245a132d6d2bdfb6f856da50dc03d75ebb761439fb626cf",
"sha256:50ddbe3a7b4b6ab96812f5a4d570f401a2cdb95642fd04c062f98939610bbeee",
"sha256:5338a313f998e1be7267191b7caaae82563b4a2b42b393561055412a34042caa",
"sha256:5591daf81313096909d973fb2612fccd87528fdfdd39f6478bdce54543178954",
"sha256:56896ceeffe25946c4010320629e2d858ca763cd8ded273c81672a5edbcb1e0a",
"sha256:58a01ea34057463f7a98a4d6ff40160f65f945e924fec08a5b39e327e372875d",
"sha256:5bfac7f236ba1a4d402644bdce47fb9db02a7cf3214a1f637d3a88390f9e5428",
"sha256:5c5a8a83df95e51f7a7c2b083eaea134cbed39fc42c6aeb2e764ddb7ccccd43e",
"sha256:5f2fb10518f6b365f5b720e43a529c3b2324ca02932f609631a44edb347d8d54",
"sha256:64af877116edf051375b45f0bda648143176a017b13803ec7b3a3111dc05f4c5",
"sha256:6d70fa9c6d2e955bde8cd327ffc11f2cc34bc21944e5571a46ca501e7eadef24",
"sha256:6d79f659965290af60d6acc8e2716341865fe74609a7ede2a33c2f86ad893b8f",
"sha256:720963fee259291a88348ae9735d9deb5d334e84a016244f61c89f5a49aa400a",
"sha256:75a3b6e9c695a6570ea488db75b84bb592ff70a944957efa1c655867c575018b",
"sha256:792462abfeeca6cc8c6c1e6d27e14319682f0182f6b0ba37befe911af794db70",
"sha256:79ec4498a545733ecace48d780d22407411b07403a2e08b9a4d7596c0b97ebd7",
"sha256:7f14d6b303e55bd7d19b28309ef8014370e84a3806c5e452e078e7df7344d97a",
"sha256:7f65bd5d4cdb396295b6aa07f84ca659ac65c5c68b53956a6d95219e304b0ada",
"sha256:81c6b4a6c1af800d52a6fa32389ef8f4281583f4f99dc1a40f2bb47667281541",
"sha256:82a07de83dce09b4fa1bccbdc8bde8f188b131666af0dc9048ba0a0e448d8a3b",
"sha256:847c7f61964225fc489fe1d49eda7e0e0d253e98862c012cecf845f9ad45cdf4",
"sha256:84b52b2cf77bb7f703d16c4007b021078dbbe6cf8ffb57abe81a7bacfc175ef2",
"sha256:86685fa04067f7175f9718489ae755f6acde03593a1a9ca89305554af40e14fd",
"sha256:8a9c962c64a4c08def58b9799333e33af94ec53038cf151d36edacdb41f81646",
"sha256:8cbd4bfc933b33b85c43ef4c1f4d5e3e9d91975ea6368acf5fbac02bac06ea89",
"sha256:8ffe660e963ae711cb9e2b8d8461c9b1ad6167823837fc17d59d5e539fb898fa",
"sha256:94652da1a4ca7cfb69c15dd6986b205e0bd9c63a05029c3b48b4201085f527bd",
"sha256:969fd67de8c42affdb47b38b80f1eaa79ac0ef17d65407cdd931db1675315af1",
"sha256:9858dcbc23ba7eaadcd319786b982278a1a2b2020720b19db43e309579ff76fb",
"sha256:99d25aff3745c54e61ab340b98400c52ebec04290a62078155e0d7eb30380220",
"sha256:99f55e14e7c56f4fafe1343480c32b110ef03836c21ff7c48bae7add6818f77c",
"sha256:9d35d8f8a1c9ed4e2b08187b513f8a3c71958600129db3aa26d85ea3abfd1310",
"sha256:a2ba92f59e30ce915e9e79af37649432e3a212ddddf416d4d686b1b4825bcdb2",
"sha256:a2cb35a6efaa0e3623d8272471371a12c7e07b51a33e5efce9b58f655d864b4e",
"sha256:a358277122456666a8b2a0b9aa04f1b89d34e8aa41d08a6557d693e6abb6667c",
"sha256:a60da2f9efbed355edb35a1fb6829148676786c829fad708bb6bb47211b3593a",
"sha256:aa7dec53c25f1949513457ef8b0ea1fb40e76c672cc4d2daa8ad3c8d6b73491a",
"sha256:b1572ee0eb1967e71787af636bb7d1eb9c6735d5337762c450650e7f51844594",
"sha256:b4f10d3f304be7183fac79bf2cd997f82e16aa9a9f37343d76c026c6e435a8a8",
"sha256:bbbbfbb7d039b20d289ce56b1beb46138d65769d04af50c199c6ac4cb6054d52",
"sha256:c394a3f055b49f92626f83c1a0b6d6cd2c628f1ccd72481c3e3c6aa4695f3b20",
"sha256:c396358023b876cff547ce87f4e8ff8a2280598873a137e8cc69e115262260b8",
"sha256:c5ba07e58fd98c9782201e79eb8dd4225733d212a5a3700f9a84d329bd0463a6",
"sha256:c764fb167411d5afaef88138542a4bfa28bd5e5ded5e8e42df87cef965efd6e9",
"sha256:cbba763d99de0255a3e4938f25a8579930ac8aa089233cb2fb2ed7d04d4aff02",
"sha256:cbd1660fb48827381ce3a621a4fdc237959e1cd4e98b098952a8f624a0726425",
"sha256:cd761d158f67e288fd0ebe00c3b158095ce80a4bc7c32b60c7121224003ba70d",
"sha256:cdfbb27f2c46bb5bbdcee147530cbc5ca8ab858d7693924e88e30ada21b2c5e2",
"sha256:d2dbe8a3baf2d842e342e8acb06ae3844765d38df67687c144cdeb71f1bcb5d7",
"sha256:d5c931ec1c03111718cabf85f6012bb2815fa0ce578175567fa8d6f2cc15d3b4",
"sha256:df6d7bf3e15b7e6e202a16ff4948a51759354016026deb04ab9b5acbbe35e096",
"sha256:dfbe2aa45b273f49e715c5345d94874cb65a28482bf231af408891c260601b8d",
"sha256:e12769d3adcc419e65860de946df8d2ed274932177ac1cdb05186e498aaa9149",
"sha256:e5aed4754895942ae15ffa48c52d181e1c1463236fda68d2dba29c03aa61786b",
"sha256:e645b4c365d6f1f9e0799380ad6395268f3c3b898244a650aaeb8d9d27b74c35",
"sha256:ed3493a369fe849cce98542d7405c88030b355e4d2e113887cb7ecc86c205773",
"sha256:f08342dc8d19214faa7ef99574dea6c37a2790d6d04a9793ef8fa76c188dc08d",
"sha256:f0a55cf02d2cdd739b40ce10c09bbdd520e141217696add7a48b56e67bdfdfe6",
"sha256:f0ce9d9e07c75da8027c62b4c9f45771d1d8aae7dc9ad7fb606c6a5aedbe9741",
"sha256:f1f723e260c35e1c7c57a09d3a6ebe681bd56c83e1208ae3ce1869b7c0d10d4f",
"sha256:f2fcbe9b3a5996b417e030aa33a562e7e20dfc86271e53d7e841fc5df16268b8",
"sha256:f3fd8df63c41ff6a676d031956aebf68ebbc687b47c507da25501eb22eec341f",
"sha256:f8d3417db5e14a6789073b21ae44439a755289477901901bae378a57b905e148",
"sha256:fbf05678c2ae0064fb1b8de7e9e8f0fc30621b73c8477786dd0fb3868044a8c8",
"sha256:fc98ff43abad61f00515ad9a06213b7716699146e46eabd256cdfe7cb522bd97",
"sha256:ff1863f037dad765ef5963efc2e37d399ac023e192a6f2bb394e2377d023cefe"
],
"version": "==3.8.0"
},
"bitstring": {
"hashes": [
"sha256:e682ac522bb63e041d16cbc9d0ca86a4f00194db16d0847c7efe066f836b2e37",
"sha256:feac49524fcf3ef27e6081e86f02b10d2adf6c3773bf22fbe0e7eea9534bc737"
],
"markers": "python_version >= '3.8'",
"version": "==4.4.0"
},
"certifi": {
"hashes": [
"sha256:027692e4402ad994f1c42e52a4997a9763c646b73e4096e4d5d6db8af1d6f0fa",
"sha256:e887ab5cee78ea814d3472169153c2d12cd43b14bd03329a39a9c6e2e80bfba7"
],
"markers": "python_version >= '3.7'",
"version": "==2026.2.25"
},
"cffi": {
"hashes": [
"sha256:00bdf7acc5f795150faa6957054fbbca2439db2f775ce831222b66f192f03beb",
"sha256:07b271772c100085dd28b74fa0cd81c8fb1a3ba18b21e03d7c27f3436a10606b",
"sha256:087067fa8953339c723661eda6b54bc98c5625757ea62e95eb4898ad5e776e9f",
"sha256:0a1527a803f0a659de1af2e1fd700213caba79377e27e4693648c2923da066f9",
"sha256:0cf2d91ecc3fcc0625c2c530fe004f82c110405f101548512cce44322fa8ac44",
"sha256:0f6084a0ea23d05d20c3edcda20c3d006f9b6f3fefeac38f59262e10cef47ee2",
"sha256:12873ca6cb9b0f0d3a0da705d6086fe911591737a59f28b7936bdfed27c0d47c",
"sha256:19f705ada2530c1167abacb171925dd886168931e0a7b78f5bffcae5c6b5be75",
"sha256:1cd13c99ce269b3ed80b417dcd591415d3372bcac067009b6e0f59c7d4015e65",
"sha256:1e3a615586f05fc4065a8b22b8152f0c1b00cdbc60596d187c2a74f9e3036e4e",
"sha256:1f72fb8906754ac8a2cc3f9f5aaa298070652a0ffae577e0ea9bd480dc3c931a",
"sha256:1fc9ea04857caf665289b7a75923f2c6ed559b8298a1b8c49e59f7dd95c8481e",
"sha256:203a48d1fb583fc7d78a4c6655692963b860a417c0528492a6bc21f1aaefab25",
"sha256:2081580ebb843f759b9f617314a24ed5738c51d2aee65d31e02f6f7a2b97707a",
"sha256:21d1152871b019407d8ac3985f6775c079416c282e431a4da6afe7aefd2bccbe",
"sha256:24b6f81f1983e6df8db3adc38562c83f7d4a0c36162885ec7f7b77c7dcbec97b",
"sha256:256f80b80ca3853f90c21b23ee78cd008713787b1b1e93eae9f3d6a7134abd91",
"sha256:28a3a209b96630bca57cce802da70c266eb08c6e97e5afd61a75611ee6c64592",
"sha256:2c8f814d84194c9ea681642fd164267891702542f028a15fc97d4674b6206187",
"sha256:2de9a304e27f7596cd03d16f1b7c72219bd944e99cc52b84d0145aefb07cbd3c",
"sha256:38100abb9d1b1435bc4cc340bb4489635dc2f0da7456590877030c9b3d40b0c1",
"sha256:3925dd22fa2b7699ed2617149842d2e6adde22b262fcbfada50e3d195e4b3a94",
"sha256:3e17ed538242334bf70832644a32a7aae3d83b57567f9fd60a26257e992b79ba",
"sha256:3e837e369566884707ddaf85fc1744b47575005c0a229de3327f8f9a20f4efeb",
"sha256:3f4d46d8b35698056ec29bca21546e1551a205058ae1a181d871e278b0b28165",
"sha256:44d1b5909021139fe36001ae048dbdde8214afa20200eda0f64c068cac5d5529",
"sha256:45d5e886156860dc35862657e1494b9bae8dfa63bf56796f2fb56e1679fc0bca",
"sha256:4647afc2f90d1ddd33441e5b0e85b16b12ddec4fca55f0d9671fef036ecca27c",
"sha256:4671d9dd5ec934cb9a73e7ee9676f9362aba54f7f34910956b84d727b0d73fb6",
"sha256:53f77cbe57044e88bbd5ed26ac1d0514d2acf0591dd6bb02a3ae37f76811b80c",
"sha256:5eda85d6d1879e692d546a078b44251cdd08dd1cfb98dfb77b670c97cee49ea0",
"sha256:5fed36fccc0612a53f1d4d9a816b50a36702c28a2aa880cb8a122b3466638743",
"sha256:61d028e90346df14fedc3d1e5441df818d095f3b87d286825dfcbd6459b7ef63",
"sha256:66f011380d0e49ed280c789fbd08ff0d40968ee7b665575489afa95c98196ab5",
"sha256:6824f87845e3396029f3820c206e459ccc91760e8fa24422f8b0c3d1731cbec5",
"sha256:6c6c373cfc5c83a975506110d17457138c8c63016b563cc9ed6e056a82f13ce4",
"sha256:6d02d6655b0e54f54c4ef0b94eb6be0607b70853c45ce98bd278dc7de718be5d",
"sha256:6d50360be4546678fc1b79ffe7a66265e28667840010348dd69a314145807a1b",
"sha256:730cacb21e1bdff3ce90babf007d0a0917cc3e6492f336c2f0134101e0944f93",
"sha256:737fe7d37e1a1bffe70bd5754ea763a62a066dc5913ca57e957824b72a85e205",
"sha256:74a03b9698e198d47562765773b4a8309919089150a0bb17d829ad7b44b60d27",
"sha256:7553fb2090d71822f02c629afe6042c299edf91ba1bf94951165613553984512",
"sha256:7a66c7204d8869299919db4d5069a82f1561581af12b11b3c9f48c584eb8743d",
"sha256:7cc09976e8b56f8cebd752f7113ad07752461f48a58cbba644139015ac24954c",
"sha256:81afed14892743bbe14dacb9e36d9e0e504cd204e0b165062c488942b9718037",
"sha256:8941aaadaf67246224cee8c3803777eed332a19d909b47e29c9842ef1e79ac26",
"sha256:89472c9762729b5ae1ad974b777416bfda4ac5642423fa93bd57a09204712322",
"sha256:8ea985900c5c95ce9db1745f7933eeef5d314f0565b27625d9a10ec9881e1bfb",
"sha256:8eca2a813c1cb7ad4fb74d368c2ffbbb4789d377ee5bb8df98373c2cc0dee76c",
"sha256:92b68146a71df78564e4ef48af17551a5ddd142e5190cdf2c5624d0c3ff5b2e8",
"sha256:9332088d75dc3241c702d852d4671613136d90fa6881da7d770a483fd05248b4",
"sha256:94698a9c5f91f9d138526b48fe26a199609544591f859c870d477351dc7b2414",
"sha256:9a67fc9e8eb39039280526379fb3a70023d77caec1852002b4da7e8b270c4dd9",
"sha256:9de40a7b0323d889cf8d23d1ef214f565ab154443c42737dfe52ff82cf857664",
"sha256:a05d0c237b3349096d3981b727493e22147f934b20f6f125a3eba8f994bec4a9",
"sha256:afb8db5439b81cf9c9d0c80404b60c3cc9c3add93e114dcae767f1477cb53775",
"sha256:b18a3ed7d5b3bd8d9ef7a8cb226502c6bf8308df1525e1cc676c3680e7176739",
"sha256:b1e74d11748e7e98e2f426ab176d4ed720a64412b6a15054378afdb71e0f37dc",
"sha256:b21e08af67b8a103c71a250401c78d5e0893beff75e28c53c98f4de42f774062",
"sha256:b4c854ef3adc177950a8dfc81a86f5115d2abd545751a304c5bcf2c2c7283cfe",
"sha256:b882b3df248017dba09d6b16defe9b5c407fe32fc7c65a9c69798e6175601be9",
"sha256:baf5215e0ab74c16e2dd324e8ec067ef59e41125d3eade2b863d294fd5035c92",
"sha256:c649e3a33450ec82378822b3dad03cc228b8f5963c0c12fc3b1e0ab940f768a5",
"sha256:c654de545946e0db659b3400168c9ad31b5d29593291482c43e3564effbcee13",
"sha256:c6638687455baf640e37344fe26d37c404db8b80d037c3d29f58fe8d1c3b194d",
"sha256:c8d3b5532fc71b7a77c09192b4a5a200ea992702734a2e9279a37f2478236f26",
"sha256:cb527a79772e5ef98fb1d700678fe031e353e765d1ca2d409c92263c6d43e09f",
"sha256:cf364028c016c03078a23b503f02058f1814320a56ad535686f90565636a9495",
"sha256:d48a880098c96020b02d5a1f7d9251308510ce8858940e6fa99ece33f610838b",
"sha256:d68b6cef7827e8641e8ef16f4494edda8b36104d79773a334beaa1e3521430f6",
"sha256:d9b29c1f0ae438d5ee9acb31cadee00a58c46cc9c0b2f9038c6b0b3470877a8c",
"sha256:d9b97165e8aed9272a6bb17c01e3cc5871a594a446ebedc996e2397a1c1ea8ef",
"sha256:da68248800ad6320861f129cd9c1bf96ca849a2771a59e0344e88681905916f5",
"sha256:da902562c3e9c550df360bfa53c035b2f241fed6d9aef119048073680ace4a18",
"sha256:dbd5c7a25a7cb98f5ca55d258b103a2054f859a46ae11aaf23134f9cc0d356ad",
"sha256:dd4f05f54a52fb558f1ba9f528228066954fee3ebe629fc1660d874d040ae5a3",
"sha256:de8dad4425a6ca6e4e5e297b27b5c824ecc7581910bf9aee86cb6835e6812aa7",
"sha256:e11e82b744887154b182fd3e7e8512418446501191994dbf9c9fc1f32cc8efd5",
"sha256:e6e73b9e02893c764e7e8d5bb5ce277f1a009cd5243f8228f75f842bf937c534",
"sha256:f73b96c41e3b2adedc34a7356e64c8eb96e03a3782b535e043a986276ce12a49",
"sha256:f93fd8e5c8c0a4aa1f424d6173f14a892044054871c771f8566e4008eaa359d2",
"sha256:fc33c5141b55ed366cfaad382df24fe7dcbc686de5be719b207bb248e3053dc5",
"sha256:fc7de24befaeae77ba923797c7c87834c73648a05a4bde34b3b7e5588973a453",
"sha256:fe562eb1a64e67dd297ccc4f5addea2501664954f2692b69a76449ec7913ecbf"
],
"markers": "python_full_version >= '3.9' and platform_python_implementation != 'PyPy'",
"version": "==2.0.0"
},
"charset-normalizer": {
"hashes": [
"sha256:06a7e86163334edfc5d20fe104db92fcd666e5a5df0977cb5680a506fe26cc8e",
"sha256:0c173ce3a681f309f31b87125fecec7a5d1347261ea11ebbb856fa6006b23c8c",
"sha256:0e28d62a8fc7a1fa411c43bd65e346f3bce9716dc51b897fbe930c5987b402d5",
"sha256:0e901eb1049fdb80f5bd11ed5ea1e498ec423102f7a9b9e4645d5b8204ff2815",
"sha256:11afb56037cbc4b1555a34dd69151e8e069bee82e613a73bef6e714ce733585f",
"sha256:150b8ce8e830eb7ccb029ec9ca36022f756986aaaa7956aad6d9ec90089338c0",
"sha256:172985e4ff804a7ad08eebec0a1640ece87ba5041d565fff23c8f99c1f389484",
"sha256:197c1a244a274bb016dd8b79204850144ef77fe81c5b797dc389327adb552407",
"sha256:1ae6b62897110aa7c79ea2f5dd38d1abca6db663687c0b1ad9aed6f6bae3d9d6",
"sha256:1cf0a70018692f85172348fe06d3a4b63f94ecb055e13a00c644d368eb82e5b8",
"sha256:1ed80ff870ca6de33f4d953fda4d55654b9a2b340ff39ab32fa3adbcd718f264",
"sha256:22c6f0c2fbc31e76c3b8a86fba1a56eda6166e238c29cdd3d14befdb4a4e4815",
"sha256:231d4da14bcd9301310faf492051bee27df11f2bc7549bc0bb41fef11b82daa2",
"sha256:259695e2ccc253feb2a016303543d691825e920917e31f894ca1a687982b1de4",
"sha256:2a24157fa36980478dd1770b585c0f30d19e18f4fb0c47c13aa568f871718579",
"sha256:2b1a63e8224e401cafe7739f77efd3f9e7f5f2026bda4aead8e59afab537784f",
"sha256:2bd9d128ef93637a5d7a6af25363cf5dec3fa21cf80e68055aad627f280e8afa",
"sha256:2e1d8ca8611099001949d1cdfaefc510cf0f212484fe7c565f735b68c78c3c95",
"sha256:2ef7fedc7a6ecbe99969cd09632516738a97eeb8bd7258bf8a0f23114c057dab",
"sha256:2f7fdd9b6e6c529d6a2501a2d36b240109e78a8ceaef5687cfcfa2bbe671d297",
"sha256:30f445ae60aad5e1f8bdbb3108e39f6fbc09f4ea16c815c66578878325f8f15a",
"sha256:31215157227939b4fb3d740cd23fe27be0439afef67b785a1eb78a3ae69cba9e",
"sha256:34315ff4fc374b285ad7f4a0bf7dcbfe769e1b104230d40f49f700d4ab6bbd84",
"sha256:3516bbb8d42169de9e61b8520cbeeeb716f12f4ecfe3fd30a9919aa16c806ca8",
"sha256:3778fd7d7cd04ae8f54651f4a7a0bd6e39a0cf20f801720a4c21d80e9b7ad6b0",
"sha256:39f5068d35621da2881271e5c3205125cc456f54e9030d3f723288c873a71bf9",
"sha256:404a1e552cf5b675a87f0651f8b79f5f1e6fd100ee88dc612f89aa16abd4486f",
"sha256:419a9d91bd238052642a51938af8ac05da5b3343becde08d5cdeab9046df9ee1",
"sha256:423fb7e748a08f854a08a222b983f4df1912b1daedce51a72bd24fe8f26a1843",
"sha256:4482481cb0572180b6fd976a4d5c72a30263e98564da68b86ec91f0fe35e8565",
"sha256:461598cd852bfa5a61b09cae2b1c02e2efcd166ee5516e243d540ac24bfa68a7",
"sha256:47955475ac79cc504ef2704b192364e51d0d473ad452caedd0002605f780101c",
"sha256:48696db7f18afb80a068821504296eb0787d9ce239b91ca15059d1d3eaacf13b",
"sha256:4be9f4830ba8741527693848403e2c457c16e499100963ec711b1c6f2049b7c7",
"sha256:4d1d02209e06550bdaef34af58e041ad71b88e624f5d825519da3a3308e22687",
"sha256:4f41da960b196ea355357285ad1316a00099f22d0929fe168343b99b254729c9",
"sha256:517ad0e93394ac532745129ceabdf2696b609ec9f87863d337140317ebce1c14",
"sha256:51fb3c322c81d20567019778cb5a4a6f2dc1c200b886bc0d636238e364848c89",
"sha256:5273b9f0b5835ff0350c0828faea623c68bfa65b792720c453e22b25cc72930f",
"sha256:530d548084c4a9f7a16ed4a294d459b4f229db50df689bfe92027452452943a0",
"sha256:530e8cebeea0d76bdcf93357aa5e41336f48c3dc709ac52da2bb167c5b8271d9",
"sha256:54fae94be3d75f3e573c9a1b5402dc593de19377013c9a0e4285e3d402dd3a2a",
"sha256:572d7c822caf521f0525ba1bce1a622a0b85cf47ffbdae6c9c19e3b5ac3c4389",
"sha256:58c948d0d086229efc484fe2f30c2d382c86720f55cd9bc33591774348ad44e0",
"sha256:5d11595abf8dd942a77883a39d81433739b287b6aa71620f15164f8096221b30",
"sha256:5f8ddd609f9e1af8c7bd6e2aca279c931aefecd148a14402d4e368f3171769fd",
"sha256:5feb91325bbceade6afab43eb3b508c63ee53579fe896c77137ded51c6b6958e",
"sha256:60c74963d8350241a79cb8feea80e54d518f72c26db618862a8f53e5023deaf9",
"sha256:613f19aa6e082cf96e17e3ffd89383343d0d589abda756b7764cf78361fd41dc",
"sha256:659a1e1b500fac8f2779dd9e1570464e012f43e580371470b45277a27baa7532",
"sha256:695f5c2823691a25f17bc5d5ffe79fa90972cc34b002ac6c843bb8a1720e950d",
"sha256:69dd852c2f0ad631b8b60cfbe25a28c0058a894de5abb566619c205ce0550eae",
"sha256:6cceb5473417d28edd20c6c984ab6fee6c6267d38d906823ebfe20b03d607dc2",
"sha256:71be7e0e01753a89cf024abf7ecb6bca2c81738ead80d43004d9b5e3f1244e64",
"sha256:74119174722c4349af9708993118581686f343adc1c8c9c007d59be90d077f3f",
"sha256:74a2e659c7ecbc73562e2a15e05039f1e22c75b7c7618b4b574a3ea9118d1557",
"sha256:7504e9b7dc05f99a9bbb4525c67a2c155073b44d720470a148b34166a69c054e",
"sha256:79090741d842f564b1b2827c0b82d846405b744d31e84f18d7a7b41c20e473ff",
"sha256:7a6967aaf043bceabab5412ed6bd6bd26603dae84d5cb75bf8d9a74a4959d398",
"sha256:7bda6eebafd42133efdca535b04ccb338ab29467b3f7bf79569883676fc628db",
"sha256:7edbed096e4a4798710ed6bc75dcaa2a21b68b6c356553ac4823c3658d53743a",
"sha256:7f9019c9cb613f084481bd6a100b12e1547cf2efe362d873c2e31e4035a6fa43",
"sha256:802168e03fba8bbc5ce0d866d589e4b1ca751d06edee69f7f3a19c5a9fe6b597",
"sha256:80d0a5615143c0b3225e5e3ef22c8d5d51f3f72ce0ea6fb84c943546c7b25b6c",
"sha256:82060f995ab5003a2d6e0f4ad29065b7672b6593c8c63559beefe5b443242c3e",
"sha256:836ab36280f21fc1a03c99cd05c6b7af70d2697e374c7af0b61ed271401a72a2",
"sha256:8761ac29b6c81574724322a554605608a9960769ea83d2c73e396f3df896ad54",
"sha256:87725cfb1a4f1f8c2fc9890ae2f42094120f4b44db9360be5d99a4c6b0e03a9e",
"sha256:899d28f422116b08be5118ef350c292b36fc15ec2daeb9ea987c89281c7bb5c4",
"sha256:8bc5f0687d796c05b1e28ab0d38a50e6309906ee09375dd3aff6a9c09dd6e8f4",
"sha256:8bea55c4eef25b0b19a0337dc4e3f9a15b00d569c77211fa8cde38684f234fb7",
"sha256:8e5a94886bedca0f9b78fecd6afb6629142fd2605aa70a125d49f4edc6037ee6",
"sha256:90ca27cd8da8118b18a52d5f547859cc1f8354a00cd1e8e5120df3e30d6279e5",
"sha256:92734d4d8d187a354a556626c221cd1a892a4e0802ccb2af432a1d85ec012194",
"sha256:947cf925bc916d90adba35a64c82aace04fa39b46b52d4630ece166655905a69",
"sha256:95b52c68d64c1878818687a473a10547b3292e82b6f6fe483808fb1468e2f52f",
"sha256:97d0235baafca5f2b09cf332cc275f021e694e8362c6bb9c96fc9a0eb74fc316",
"sha256:9ca4c0b502ab399ef89248a2c84c54954f77a070f28e546a85e91da627d1301e",
"sha256:9cc4fc6c196d6a8b76629a70ddfcd4635a6898756e2d9cac5565cf0654605d73",
"sha256:9cc6e6d9e571d2f863fa77700701dae73ed5f78881efc8b3f9a4398772ff53e8",
"sha256:a056d1ad2633548ca18ffa2f85c202cfb48b68615129143915b8dc72a806a923",
"sha256:a26611d9987b230566f24a0a125f17fe0de6a6aff9f25c9f564aaa2721a5fb88",
"sha256:a4474d924a47185a06411e0064b803c68be044be2d60e50e8bddcc2649957c1f",
"sha256:a4ea868bc28109052790eb2b52a9ab33f3aa7adc02f96673526ff47419490e21",
"sha256:a9e68c9d88823b274cf1e72f28cb5dc89c990edf430b0bfd3e2fb0785bfeabf4",
"sha256:aa9cccf4a44b9b62d8ba8b4dd06c649ba683e4bf04eea606d2e94cfc2d6ff4d6",
"sha256:ab30e5e3e706e3063bc6de96b118688cb10396b70bb9864a430f67df98c61ecc",
"sha256:ac2393c73378fea4e52aa56285a3d64be50f1a12395afef9cce47772f60334c2",
"sha256:ad8faf8df23f0378c6d527d8b0b15ea4a2e23c89376877c598c4870d1b2c7866",
"sha256:b35b200d6a71b9839a46b9b7fff66b6638bb52fc9658aa58796b0326595d3021",
"sha256:b3694e3f87f8ac7ce279d4355645b3c878d24d1424581b46282f24b92f5a4ae2",
"sha256:b4ff1d35e8c5bd078be89349b6f3a845128e685e751b6ea1169cf2160b344c4d",
"sha256:bbc8c8650c6e51041ad1be191742b8b421d05bbd3410f43fa2a00c8db87678e8",
"sha256:bc72863f4d9aba2e8fd9085e63548a324ba706d2ea2c83b260da08a59b9482de",
"sha256:bf625105bb9eef28a56a943fec8c8a98aeb80e7d7db99bd3c388137e6eb2d237",
"sha256:c2274ca724536f173122f36c98ce188fd24ce3dad886ec2b7af859518ce008a4",
"sha256:c45a03a4c69820a399f1dda9e1d8fbf3562eda46e7720458180302021b08f778",
"sha256:c8ae56368f8cc97c7e40a7ee18e1cedaf8e780cd8bc5ed5ac8b81f238614facb",
"sha256:c907cdc8109f6c619e6254212e794d6548373cc40e1ec75e6e3823d9135d29cc",
"sha256:ca0276464d148c72defa8bb4390cce01b4a0e425f3b50d1435aa6d7a18107602",
"sha256:cd5e2801c89992ed8c0a3f0293ae83c159a60d9a5d685005383ef4caca77f2c4",
"sha256:d08ec48f0a1c48d75d0356cea971921848fb620fdeba805b28f937e90691209f",
"sha256:d1a2ee9c1499fc8f86f4521f27a973c914b211ffa87322f4ee33bb35392da2c5",
"sha256:d5f5d1e9def3405f60e3ca8232d56f35c98fb7bf581efcc60051ebf53cb8b611",
"sha256:d60377dce4511655582e300dc1e5a5f24ba0cb229005a1d5c8d0cb72bb758ab8",
"sha256:d73beaac5e90173ac3deb9928a74763a6d230f494e4bfb422c217a0ad8e629bf",
"sha256:d7de2637729c67d67cf87614b566626057e95c303bc0a55ffe391f5205e7003d",
"sha256:dad6e0f2e481fffdcf776d10ebee25e0ef89f16d691f1e5dee4b586375fdc64b",
"sha256:dda86aba335c902b6149a02a55b38e96287157e609200811837678214ba2b1db",
"sha256:df01808ee470038c3f8dc4f48620df7225c49c2d6639e38f96e6d6ac6e6f7b0e",
"sha256:e1f6e2f00a6b8edb562826e4632e26d063ac10307e80f7461f7de3ad8ef3f077",
"sha256:e25369dc110d58ddf29b949377a93e0716d72a24f62bad72b2b39f155949c1fd",
"sha256:e3c701e954abf6fc03a49f7c579cc80c2c6cc52525340ca3186c41d3f33482ef",
"sha256:e5bcc1a1ae744e0bb59641171ae53743760130600da8db48cbb6e4918e186e4e",
"sha256:e68c14b04827dd76dcbd1aeea9e604e3e4b78322d8faf2f8132c7138efa340a8",
"sha256:e8aeb10fcbe92767f0fa69ad5a72deca50d0dca07fbde97848997d778a50c9fe",
"sha256:e985a16ff513596f217cee86c21371b8cd011c0f6f056d0920aa2d926c544058",
"sha256:ecbbd45615a6885fe3240eb9db73b9e62518b611850fdf8ab08bd56de7ad2b17",
"sha256:ee4ec14bc1680d6b0afab9aea2ef27e26d2024f18b24a2d7155a52b60da7e833",
"sha256:ef5960d965e67165d75b7c7ffc60a83ec5abfc5c11b764ec13ea54fbef8b4421",
"sha256:f0cdaecd4c953bfae0b6bb64910aaaca5a424ad9c72d85cb88417bb9814f7550",
"sha256:f1ce721c8a7dfec21fcbdfe04e8f68174183cf4e8188e0645e92aa23985c57ff",
"sha256:f50498891691e0864dc3da965f340fada0771f6142a378083dc4608f4ea513e2",
"sha256:f5ea69428fa1b49573eef0cc44a1d43bebd45ad0c611eb7d7eac760c7ae771bc",
"sha256:f61aa92e4aad0be58eb6eb4e0c21acf32cf8065f4b2cae5665da756c4ceef982",
"sha256:f6e4333fb15c83f7d1482a76d45a0818897b3d33f00efd215528ff7c51b8e35d",
"sha256:f820f24b09e3e779fe84c3c456cb4108a7aa639b0d1f02c28046e11bfcd088ed",
"sha256:f98059e4fcd3e3e4e2d632b7cf81c2faae96c43c60b569e9c621468082f1d104",
"sha256:fcce033e4021347d80ed9c66dcf1e7b1546319834b74445f561d2e2221de5659"
],
"markers": "python_version >= '3.7'",
"version": "==3.4.6"
},
"click": {
"hashes": [
"sha256:12ff4785d337a1bb490bb7e9c2b1ee5da3112e94a8622f26a6c77f5d2fc6842a",
"sha256:981153a64e25f12d547d3426c367a4857371575ee7ad18df2a6183ab0545b2a6"
],
"markers": "python_version >= '3.10'",
"version": "==8.3.1"
},
"cryptography": {
"hashes": [
"sha256:02f547fce831f5096c9a567fd41bc12ca8f11df260959ecc7c3202555cc47a72",
"sha256:039917b0dc418bb9f6edce8a906572d69e74bd330b0b3fea4f79dab7f8ddd235",
"sha256:1abfdb89b41c3be0365328a410baa9df3ff8a9110fb75e7b52e66803ddabc9a9",
"sha256:2ae6971afd6246710480e3f15824ed3029a60fc16991db250034efd0b9fb4356",
"sha256:2b7a67c9cd56372f3249b39699f2ad479f6991e62ea15800973b956f4b73e257",
"sha256:351695ada9ea9618b3500b490ad54c739860883df6c1f555e088eaf25b1bbaad",
"sha256:38946c54b16c885c72c4f59846be9743d699eee2b69b6988e0a00a01f46a61a4",
"sha256:3b4995dc971c9fb83c25aa44cf45f02ba86f71ee600d81091c2f0cbae116b06c",
"sha256:3ce58ba46e1bc2aac4f7d9290223cead56743fa6ab94a5d53292ffaac6a91614",
"sha256:3ee190460e2fbe447175cda91b88b84ae8322a104fc27766ad09428754a618ed",
"sha256:4108d4c09fbbf2789d0c926eb4152ae1760d5a2d97612b92d508d96c861e4d31",
"sha256:420d0e909050490d04359e7fdb5ed7e667ca5c3c402b809ae2563d7e66a92229",
"sha256:47fb8a66058b80e509c47118ef8a75d14c455e81ac369050f20ba0d23e77fee0",
"sha256:4c3341037c136030cb46e4b1e17b7418ea4cbd9dd207e4a6f3b2b24e0d4ac731",
"sha256:4d7e3d356b8cd4ea5aff04f129d5f66ebdc7b6f8eae802b93739ed520c47c79b",
"sha256:4d8ae8659ab18c65ced284993c2265910f6c9e650189d4e3f68445ef82a810e4",
"sha256:4e817a8920bfbcff8940ecfd60f23d01836408242b30f1a708d93198393a80b4",
"sha256:50bfb6925eff619c9c023b967d5b77a54e04256c4281b0e21336a130cd7fc263",
"sha256:556e106ee01aa13484ce9b0239bca667be5004efb0aabbed28d353df86445595",
"sha256:582f5fcd2afa31622f317f80426a027f30dc792e9c80ffee87b993200ea115f1",
"sha256:5be7bf2fb40769e05739dd0046e7b26f9d4670badc7b032d6ce4db64dddc0678",
"sha256:60ee7e19e95104d4c03871d7d7dfb3d22ef8a9b9c6778c94e1c8fcc8365afd48",
"sha256:61aa400dce22cb001a98014f647dc21cda08f7915ceb95df0c9eaf84b4b6af76",
"sha256:68f68d13f2e1cb95163fa3b4db4bf9a159a418f5f6e7242564fc75fcae667fd0",
"sha256:7d1f30a86d2757199cb2d56e48cce14deddf1f9c95f1ef1b64ee91ea43fe2e18",
"sha256:7d731d4b107030987fd61a7f8ab512b25b53cef8f233a97379ede116f30eb67d",
"sha256:803812e111e75d1aa73690d2facc295eaefd4439be1023fefc4995eaea2af90d",
"sha256:80a8d7bfdf38f87ca30a5391c0c9ce4ed2926918e017c29ddf643d0ed2778ea1",
"sha256:8293f3dea7fc929ef7240796ba231413afa7b68ce38fd21da2995549f5961981",
"sha256:8456928655f856c6e1533ff59d5be76578a7157224dbd9ce6872f25055ab9ab7",
"sha256:890bcb4abd5a2d3f852196437129eb3667d62630333aacc13dfd470fad3aaa82",
"sha256:94a76daa32eb78d61339aff7952ea819b1734b46f73646a07decb40e5b3448e2",
"sha256:9f16fbdf4da055efb21c22d81b89f155f02ba420558db21288b3d0035bafd5f4",
"sha256:a3d1fae9863299076f05cb8a778c467578262fae09f9dc0ee9b12eb4268ce663",
"sha256:a3d507bb6a513ca96ba84443226af944b0f7f47dcc9a399d110cd6146481d24c",
"sha256:abace499247268e3757271b2f1e244b36b06f8515cf27c4d49468fc9eb16e93d",
"sha256:ba2a27ff02f48193fc4daeadf8ad2590516fa3d0adeeb34336b96f7fa64c1e3a",
"sha256:bc84e875994c3b445871ea7181d424588171efec3e185dced958dad9e001950a",
"sha256:bfd56bb4b37ed4f330b82402f6f435845a5f5648edf1ad497da51a8452d5d62d",
"sha256:c18ff11e86df2e28854939acde2d003f7984f721eba450b56a200ad90eeb0e6b",
"sha256:c3bcce8521d785d510b2aad26ae2c966092b7daa8f45dd8f44734a104dc0bc1a",
"sha256:c4143987a42a2397f2fc3b4d7e3a7d313fbe684f67ff443999e803dd75a76826",
"sha256:c69fd885df7d089548a42d5ec05be26050ebcd2283d89b3d30676eb32ff87dee",
"sha256:ced80795227d70549a411a4ab66e8ce307899fad2220ce5ab2f296e687eacde9",
"sha256:d66e421495fdb797610a08f43b05269e0a5ea7f5e652a89bfd5a7d3c1dee3648",
"sha256:d861ee9e76ace6cf36a6a89b959ec08e7bc2493ee39d07ffe5acb23ef46d27da",
"sha256:e9251e3be159d1020c4030bd2e5f84d6a43fe54b6c19c12f51cde9542a2817b2",
"sha256:f145bba11b878005c496e93e257c1e88f154d278d2638e6450d17e0f31e558d2",
"sha256:fe346b143ff9685e40192a4960938545c699054ba11d4f9029f94751e3f71d87"
],
"markers": "python_version >= '3.8' and python_full_version not in '3.9.0, 3.9.1'",
"version": "==46.0.5"
},
"esptool": {
"hashes": [
"sha256:9c355b7d6331cc92979cc710ae5c41f59830d1ea29ec24c467c6005a092c06d6"
],
"index": "pypi",
"version": "==5.2.0"
},
"h11": {
"hashes": [
"sha256:4e35b956cf45792e4caa5885e69fba00bdbc6ffafbfa020300e549b208ee5ff1",
"sha256:63cf8bbe7522de3bf65932fda1d9c2772064ffb3dae62d55932da54b31cb6c86"
],
"markers": "python_version >= '3.8'",
"version": "==0.16.0"
},
"idna": {
"hashes": [
"sha256:771a87f49d9defaf64091e6e6fe9c18d4833f140bd19464795bc32d966ca37ea",
"sha256:795dafcc9c04ed0c1fb032c2aa73654d8e8c5023a7df64a53f39190ada629902"
],
"markers": "python_version >= '3.8'",
"version": "==3.11"
},
"intelhex": {
"hashes": [
"sha256:87cc5225657524ec6361354be928adfd56bcf2a3dcc646c40f8f094c39c07db4",
"sha256:892b7361a719f4945237da8ccf754e9513db32f5628852785aea108dcd250093"
],
"version": "==2.3.0"
},
"markdown-it-py": {
"hashes": [
"sha256:87327c59b172c5011896038353a81343b6754500a08cd7a4973bb48c6d578147",
"sha256:cb0a2b4aa34f932c007117b194e945bd74e0ec24133ceb5bac59009cda1cb9f3"
],
"markers": "python_version >= '3.10'",
"version": "==4.0.0"
},
"mdurl": {
"hashes": [
"sha256:84008a41e51615a49fc9966191ff91509e3c40b939176e643fd50a5c2196b8f8",
"sha256:bb413d29f5eea38f31dd4754dd7377d4465116fb207585f97bf925588687c1ba"
],
"markers": "python_version >= '3.7'",
"version": "==0.1.2"
},
"microdot": {
"hashes": [
"sha256:363e3ebfc80b7e0415779848c9332e4e7fb7bd365ee54d3620abffe42ed82946",
"sha256:abfb82ca31cc430174e4761cc7356adc4bff00ea758d437c2b258883dc63f464"
],
"index": "pypi",
"version": "==2.6.0"
},
"mpremote": {
"hashes": [
"sha256:11d134c69b21b487dae3d03eed54c8ccbf84c916c8732a3e069a97cae47be3d4",
"sha256:6bb75774648091dad6833af4f86c5bf6505f8d7aec211380f9e6996c01d23cb5"
],
"index": "pypi",
"version": "==1.27.0"
},
"outcome": {
"hashes": [
"sha256:9dcf02e65f2971b80047b377468e72a268e15c0af3cf1238e6ff14f7f91143b8",
"sha256:e771c5ce06d1415e356078d3bdd68523f284b4ce5419828922b6871e65eda82b"
],
"markers": "python_version >= '3.7'",
"version": "==1.3.0.post0"
},
"platformdirs": {
"hashes": [
"sha256:1ec356301b7dc906d83f371c8f487070e99d3ccf9e501686456394622a01a934",
"sha256:68a9a4619a666ea6439f2ff250c12a853cd1cbd5158d258bd824a7df6be2f868"
],
"markers": "python_version >= '3.10'",
"version": "==4.9.4"
},
"pycparser": {
"hashes": [
"sha256:600f49d217304a5902ac3c37e1281c9fe94e4d0489de643a9504c5cdfdfc6b29",
"sha256:b727414169a36b7d524c1c3e31839a521725078d7b2ff038656844266160a992"
],
"markers": "implementation_name != 'PyPy'",
"version": "==3.0"
},
"pygments": {
"hashes": [
"sha256:636cb2477cec7f8952536970bc533bc43743542f70392ae026374600add5b887",
"sha256:86540386c03d588bb81d44bc3928634ff26449851e99741617ecb9037ee5ec0b"
],
"markers": "python_version >= '3.8'",
"version": "==2.19.2"
},
"pyjwt": {
"hashes": [
"sha256:28ca37c070cad8ba8cd9790cd940535d40274d22f80ab87f3ac6a713e6e8454c",
"sha256:c74a7a2adf861c04d002db713dd85f84beb242228e671280bf709d765b03672b"
],
"index": "pypi",
"version": "==2.12.1"
},
"pyserial": {
"hashes": [
"sha256:3c77e014170dfffbd816e6ffc205e9842efb10be9f58ec16d3e8675b4925cddb",
"sha256:c4451db6ba391ca6ca299fb3ec7bae67a5c55dde170964c7a14ceefec02f2cf0"
],
"index": "pypi",
"version": "==3.5"
},
"pysocks": {
"hashes": [
"sha256:08e69f092cc6dbe92a0fdd16eeb9b9ffbc13cadfe5ca4c7bd92ffb078b293299",
"sha256:2725bd0a9925919b9b51739eea5f9e2bae91e83288108a9ad338b2e3a4435ee5",
"sha256:3f8804571ebe159c380ac6de37643bb4685970655d3bba243530d6558b799aa0"
],
"version": "==1.7.1"
},
"python-dotenv": {
"hashes": [
"sha256:1d8214789a24de455a8b8bd8ae6fe3c6b69a5e3d64aa8a8e5d68e694bbcb285a",
"sha256:2c371a91fbd7ba082c2c1dc1f8bf89ca22564a087c2c287cd9b662adde799cf3"
],
"markers": "python_version >= '3.10'",
"version": "==1.2.2"
},
"pyyaml": {
"hashes": [
"sha256:00c4bdeba853cc34e7dd471f16b4114f4162dc03e6b7afcc2128711f0eca823c",
"sha256:0150219816b6a1fa26fb4699fb7daa9caf09eb1999f3b70fb6e786805e80375a",
"sha256:02893d100e99e03eda1c8fd5c441d8c60103fd175728e23e431db1b589cf5ab3",
"sha256:02ea2dfa234451bbb8772601d7b8e426c2bfa197136796224e50e35a78777956",
"sha256:0f29edc409a6392443abf94b9cf89ce99889a1dd5376d94316ae5145dfedd5d6",
"sha256:10892704fc220243f5305762e276552a0395f7beb4dbf9b14ec8fd43b57f126c",
"sha256:16249ee61e95f858e83976573de0f5b2893b3677ba71c9dd36b9cf8be9ac6d65",
"sha256:1d37d57ad971609cf3c53ba6a7e365e40660e3be0e5175fa9f2365a379d6095a",
"sha256:1ebe39cb5fc479422b83de611d14e2c0d3bb2a18bbcb01f229ab3cfbd8fee7a0",
"sha256:214ed4befebe12df36bcc8bc2b64b396ca31be9304b8f59e25c11cf94a4c033b",
"sha256:2283a07e2c21a2aa78d9c4442724ec1eb15f5e42a723b99cb3d822d48f5f7ad1",
"sha256:22ba7cfcad58ef3ecddc7ed1db3409af68d023b7f940da23c6c2a1890976eda6",
"sha256:27c0abcb4a5dac13684a37f76e701e054692a9b2d3064b70f5e4eb54810553d7",
"sha256:28c8d926f98f432f88adc23edf2e6d4921ac26fb084b028c733d01868d19007e",
"sha256:2e71d11abed7344e42a8849600193d15b6def118602c4c176f748e4583246007",
"sha256:34d5fcd24b8445fadc33f9cf348c1047101756fd760b4dacb5c3e99755703310",
"sha256:37503bfbfc9d2c40b344d06b2199cf0e96e97957ab1c1b546fd4f87e53e5d3e4",
"sha256:3c5677e12444c15717b902a5798264fa7909e41153cdf9ef7ad571b704a63dd9",
"sha256:3ff07ec89bae51176c0549bc4c63aa6202991da2d9a6129d7aef7f1407d3f295",
"sha256:41715c910c881bc081f1e8872880d3c650acf13dfa8214bad49ed4cede7c34ea",
"sha256:418cf3f2111bc80e0933b2cd8cd04f286338bb88bdc7bc8e6dd775ebde60b5e0",
"sha256:44edc647873928551a01e7a563d7452ccdebee747728c1080d881d68af7b997e",
"sha256:4a2e8cebe2ff6ab7d1050ecd59c25d4c8bd7e6f400f5f82b96557ac0abafd0ac",
"sha256:4ad1906908f2f5ae4e5a8ddfce73c320c2a1429ec52eafd27138b7f1cbe341c9",
"sha256:501a031947e3a9025ed4405a168e6ef5ae3126c59f90ce0cd6f2bfc477be31b7",
"sha256:5190d403f121660ce8d1d2c1bb2ef1bd05b5f68533fc5c2ea899bd15f4399b35",
"sha256:5498cd1645aa724a7c71c8f378eb29ebe23da2fc0d7a08071d89469bf1d2defb",
"sha256:5cf4e27da7e3fbed4d6c3d8e797387aaad68102272f8f9752883bc32d61cb87b",
"sha256:5e0b74767e5f8c593e8c9b5912019159ed0533c70051e9cce3e8b6aa699fcd69",
"sha256:5ed875a24292240029e4483f9d4a4b8a1ae08843b9c54f43fcc11e404532a8a5",
"sha256:5fcd34e47f6e0b794d17de1b4ff496c00986e1c83f7ab2fb8fcfe9616ff7477b",
"sha256:5fdec68f91a0c6739b380c83b951e2c72ac0197ace422360e6d5a959d8d97b2c",
"sha256:6344df0d5755a2c9a276d4473ae6b90647e216ab4757f8426893b5dd2ac3f369",
"sha256:64386e5e707d03a7e172c0701abfb7e10f0fb753ee1d773128192742712a98fd",
"sha256:652cb6edd41e718550aad172851962662ff2681490a8a711af6a4d288dd96824",
"sha256:66291b10affd76d76f54fad28e22e51719ef9ba22b29e1d7d03d6777a9174198",
"sha256:66e1674c3ef6f541c35191caae2d429b967b99e02040f5ba928632d9a7f0f065",
"sha256:6adc77889b628398debc7b65c073bcb99c4a0237b248cacaf3fe8a557563ef6c",
"sha256:79005a0d97d5ddabfeeea4cf676af11e647e41d81c9a7722a193022accdb6b7c",
"sha256:7c6610def4f163542a622a73fb39f534f8c101d690126992300bf3207eab9764",
"sha256:7f047e29dcae44602496db43be01ad42fc6f1cc0d8cd6c83d342306c32270196",
"sha256:8098f252adfa6c80ab48096053f512f2321f0b998f98150cea9bd23d83e1467b",
"sha256:850774a7879607d3a6f50d36d04f00ee69e7fc816450e5f7e58d7f17f1ae5c00",
"sha256:8d1fab6bb153a416f9aeb4b8763bc0f22a5586065f86f7664fc23339fc1c1fac",
"sha256:8da9669d359f02c0b91ccc01cac4a67f16afec0dac22c2ad09f46bee0697eba8",
"sha256:8dc52c23056b9ddd46818a57b78404882310fb473d63f17b07d5c40421e47f8e",
"sha256:9149cad251584d5fb4981be1ecde53a1ca46c891a79788c0df828d2f166bda28",
"sha256:93dda82c9c22deb0a405ea4dc5f2d0cda384168e466364dec6255b293923b2f3",
"sha256:96b533f0e99f6579b3d4d4995707cf36df9100d67e0c8303a0c55b27b5f99bc5",
"sha256:9c57bb8c96f6d1808c030b1687b9b5fb476abaa47f0db9c0101f5e9f394e97f4",
"sha256:9c7708761fccb9397fe64bbc0395abcae8c4bf7b0eac081e12b809bf47700d0b",
"sha256:9f3bfb4965eb874431221a3ff3fdcddc7e74e3b07799e0e84ca4a0f867d449bf",
"sha256:a33284e20b78bd4a18c8c2282d549d10bc8408a2a7ff57653c0cf0b9be0afce5",
"sha256:a80cb027f6b349846a3bf6d73b5e95e782175e52f22108cfa17876aaeff93702",
"sha256:b30236e45cf30d2b8e7b3e85881719e98507abed1011bf463a8fa23e9c3e98a8",
"sha256:b3bc83488de33889877a0f2543ade9f70c67d66d9ebb4ac959502e12de895788",
"sha256:b865addae83924361678b652338317d1bd7e79b1f4596f96b96c77a5a34b34da",
"sha256:b8bb0864c5a28024fac8a632c443c87c5aa6f215c0b126c449ae1a150412f31d",
"sha256:ba1cc08a7ccde2d2ec775841541641e4548226580ab850948cbfda66a1befcdc",
"sha256:bdb2c67c6c1390b63c6ff89f210c8fd09d9a1217a465701eac7316313c915e4c",
"sha256:c1ff362665ae507275af2853520967820d9124984e0f7466736aea23d8611fba",
"sha256:c2514fceb77bc5e7a2f7adfaa1feb2fb311607c9cb518dbc378688ec73d8292f",
"sha256:c3355370a2c156cffb25e876646f149d5d68f5e0a3ce86a5084dd0b64a994917",
"sha256:c458b6d084f9b935061bc36216e8a69a7e293a2f1e68bf956dcd9e6cbcd143f5",
"sha256:d0eae10f8159e8fdad514efdc92d74fd8d682c933a6dd088030f3834bc8e6b26",
"sha256:d76623373421df22fb4cf8817020cbb7ef15c725b9d5e45f17e189bfc384190f",
"sha256:ebc55a14a21cb14062aa4162f906cd962b28e2e9ea38f9b4391244cd8de4ae0b",
"sha256:eda16858a3cab07b80edaf74336ece1f986ba330fdb8ee0d6c0d68fe82bc96be",
"sha256:ee2922902c45ae8ccada2c5b501ab86c36525b883eff4255313a253a3160861c",
"sha256:efd7b85f94a6f21e4932043973a7ba2613b059c4a000551892ac9f1d11f5baf3",
"sha256:f7057c9a337546edc7973c0d3ba84ddcdf0daa14533c2065749c9075001090e6",
"sha256:fa160448684b4e94d80416c0fa4aac48967a969efe22931448d853ada8baf926",
"sha256:fc09d0aa354569bc501d4e787133afc08552722d3ab34836a80547331bb5d4a0"
],
"markers": "python_version >= '3.8'",
"version": "==6.0.3"
},
"reedsolo": {
"hashes": [
"sha256:2b6a3e402a1ee3e1eea3f932f81e6c0b7bbc615588074dca1dbbcdeb055002bd",
"sha256:c1359f02742751afe0f1c0de9f0772cc113835aa2855d2db420ea24393c87732"
],
"version": "==1.7.0"
},
"requests": {
"hashes": [
"sha256:2462f94637a34fd532264295e186976db0f5d453d1cdd31473c85a6a161affb6",
"sha256:dbba0bac56e100853db0ea71b82b4dfd5fe2bf6d3754a8893c3af500cec7d7cf"
],
"index": "pypi",
"version": "==2.32.5"
},
"rich": {
"hashes": [
"sha256:793431c1f8619afa7d3b52b2cdec859562b950ea0d4b6b505397612db8d5362d",
"sha256:b8daa0b9e4eef54dd8cf7c86c03713f53241884e814f4e2f5fb342fe520f639b"
],
"markers": "python_full_version >= '3.8.0'",
"version": "==14.3.3"
},
"rich-click": {
"hashes": [
"sha256:022997c1e30731995bdbc8ec2f82819340d42543237f033a003c7b1f843fc5dc",
"sha256:2f99120fca78f536e07b114d3b60333bc4bb2a0969053b1250869bcdc1b5351b"
],
"markers": "python_version >= '3.8'",
"version": "==1.9.7"
},
"selenium": {
"hashes": [
"sha256:003e971f805231ad63e671783a2b91a299355d10cefb9de964c36ff3819115aa",
"sha256:b8ccde8d2e7642221ca64af184a92c19eee6accf2e27f20f30472f5efae18eb1"
],
"index": "pypi",
"version": "==4.41.0"
},
"sniffio": {
"hashes": [
"sha256:2f6da418d1f1e0fddd844478f41680e794e6051915791a034ff65e5f100525a2",
"sha256:f4324edc670a0f49750a81b895f35c3adb843cca46f0530f79fc1babb23789dc"
],
"markers": "python_version >= '3.7'",
"version": "==1.3.1"
},
"sortedcontainers": {
"hashes": [
"sha256:25caa5a06cc30b6b83d11423433f65d1f9d76c4c6a0c90e3379eaa43b9bfdb88",
"sha256:a163dcaede0f1c021485e957a39245190e74249897e2ae4b2aa38595db237ee0"
],
"version": "==2.4.0"
},
"tibs": {
"hashes": [
"sha256:01ea5258bdf942d21560dc07d532082cd04f07cfef65fedd58ae84f7d0d2562a",
"sha256:0a7ce857ef05c59dc61abadc31c4b9b1e3c62f9e5fb29217988c308936aea71e",
"sha256:130bc68ff500fc8185677df7a97350b5d5339e6ba7e325bc3031337f6424ede7",
"sha256:173dfbecb2309edd9771f453580c88cf251e775613461566b23dbd756b3d54cb",
"sha256:1906729038b85c3b4c040aa28a456d85bc976d0c5007177350eb73374ffa0fd0",
"sha256:1b56583db148e5094d781c3d746815dbcbb6378c6f813c8ce291efd4ab21da8b",
"sha256:1d5521cc6768bfa6282a0c591ba06b079ab91b5c7d5696925ad2abac59779a54",
"sha256:1f95d5db62960205a1e9eba73ce67dc14e7366ae080cd4e5b6f005ebd90faf02",
"sha256:29480bf03e3372a5f9cc59ea0541f76f8efd696d4f0d214715e94247c342a037",
"sha256:2a618de62004d9217d2d2ab0f7f9bbdd098c12642dc01f07b3fb00f0b5f3131a",
"sha256:42725200f1b02687ed6e6a1c01e0ec150dc829d21d901ffc74cc0ac4d821f57f",
"sha256:477608f9b87e24a22ab6d50b81da04a5cb59bfa49598ff7ec5165035a18fb392",
"sha256:4b7510235379368b7523f624d46e0680f3706e3a3965877a6583cdcb598b8bac",
"sha256:501728d096e10d9a165aa526743d47418a6bbfd7b084fa47ecb22be7641d3edb",
"sha256:63255749f937c5e6fedcc7d54e7bd359aef711017e6855f373b0510a14ee2215",
"sha256:6a9feed5931b881809a950eca0e01e757113e2383a2af06a3e6982f110c869e2",
"sha256:76746f01b3db9dbd802f5e615f11f68df7a29ecef521b082dca53f3fa7d0084f",
"sha256:77103a9f1af72ac4cf5006828d0fb21578d19ce55fd990e9a1c8e46fd549561f",
"sha256:7d6592ed93c6748acd39df484c1ee24d40ee247c2a20ca38ba03363506fd24f3",
"sha256:847709c108800ad6a45efaf9a040628278956938a4897f7427a2587013dc3b98",
"sha256:859f05315ffb307d3474c505d694f3a547f00730a024c982f5f60316a5505b3c",
"sha256:a61d36155f8ab8642e1b6744e13822f72050fc7ec4f86ec6965295afa04949e2",
"sha256:a883ca13a922a66b2c1326a9c188123a574741a72510a4bf52fd6f97db191e44",
"sha256:ac0aa2aae38f7325c91c261ce1d18f769c4c7033c98d6ea3ea5534585cf16452",
"sha256:ace018a057459e3dccd06a4aae1c5c8cd57e352b263dcef534ae39bf3e03b5cf",
"sha256:ad61df93b50f875b277ab736c5d37b6bce56f9abce489a22f4e02d9daa2966e3",
"sha256:b9535dc7b7484904a58b51bd8e64da7efbf1d8466ff7e84ed1d78f4ddc561c99",
"sha256:d4f3ff613d486650816bc5516760c0382a2cc0ca8aeddd8914d011bc3b81d9a2",
"sha256:e13b9c7ff2604b0146772025e1ac6f85c8c625bf6ac73736ff671eaf357dda41",
"sha256:f5eea45851c960628a2bd29847765d55e19a687c5374456ad2c8cf6410eb1efa",
"sha256:f70bd250769381c73110d6f24feaf8b6fcd44f680b3cb28a20ea06db3d04fb6f"
],
"markers": "python_version >= '3.8'",
"version": "==0.5.7"
},
"trio": {
"hashes": [
"sha256:3bd5d87f781d9b0192d592aef28691f8951d6c2e41b7e1da4c25cde6c180ae9b",
"sha256:a29b92b73f09d4b48ed249acd91073281a7f1063f09caba5dc70465b5c7aa970"
],
"markers": "python_version >= '3.10'",
"version": "==0.33.0"
},
"trio-websocket": {
"hashes": [
"sha256:22c72c436f3d1e264d0910a3951934798dcc5b00ae56fc4ee079d46c7cf20fae",
"sha256:df605665f1db533f4a386c94525870851096a223adcb97f72a07e8b4beba45b6"
],
"markers": "python_version >= '3.8'",
"version": "==0.12.2"
},
"typing-extensions": {
"hashes": [
"sha256:0cea48d173cc12fa28ecabc3b837ea3cf6f38c6d1136f85cbaaf598984861466",
"sha256:f0fa19c6845758ab08074a0cfa8b7aecb71c999ca73d62883bc25cc018c4e548"
],
"markers": "python_version >= '3.9'",
"version": "==4.15.0"
},
"urllib3": {
"hashes": [
"sha256:1b62b6884944a57dbe321509ab94fd4d3b307075e0c2eae991ac71ee15ad38ed",
"sha256:bf272323e553dfb2e87d9bfd225ca7b0f467b919d7bbd355436d3fd37cb0acd4"
],
"markers": "python_version >= '3.9'",
"version": "==2.6.3"
},
"watchfiles": {
"hashes": [
"sha256:00485f441d183717038ed2e887a7c868154f216877653121068107b227a2f64c",
"sha256:03fa0f5237118a0c5e496185cafa92878568b652a2e9a9382a5151b1a0380a43",
"sha256:04e78dd0b6352db95507fd8cb46f39d185cf8c74e4cf1e4fbad1d3df96faf510",
"sha256:059098c3a429f62fc98e8ec62b982230ef2c8df68c79e826e37b895bc359a9c0",
"sha256:08af70fd77eee58549cd69c25055dc344f918d992ff626068242259f98d598a2",
"sha256:0b495de0bb386df6a12b18335a0285dda90260f51bdb505503c02bcd1ce27a8b",
"sha256:130e4876309e8686a5e37dba7d5e9bc77e6ed908266996ca26572437a5271e18",
"sha256:14e0b1fe858430fc0251737ef3824c54027bedb8c37c38114488b8e131cf8219",
"sha256:17ef139237dfced9da49fb7f2232c86ca9421f666d78c264c7ffca6601d154c3",
"sha256:1a0bb430adb19ef49389e1ad368450193a90038b5b752f4ac089ec6942c4dff4",
"sha256:1db5d7ae38ff20153d542460752ff397fcf5c96090c1230803713cf3147a6803",
"sha256:28475ddbde92df1874b6c5c8aaeb24ad5be47a11f87cde5a28ef3835932e3e94",
"sha256:2edc3553362b1c38d9f06242416a5d8e9fe235c204a4072e988ce2e5bb1f69f6",
"sha256:30f7da3fb3f2844259cba4720c3fc7138eb0f7b659c38f3bfa65084c7fc7abce",
"sha256:311ff15a0bae3714ffb603e6ba6dbfba4065ab60865d15a6ec544133bdb21099",
"sha256:319b27255aacd9923b8a276bb14d21a5f7ff82564c744235fc5eae58d95422ae",
"sha256:35c53bd62a0b885bf653ebf6b700d1bf05debb78ad9292cf2a942b23513dc4c4",
"sha256:36193ed342f5b9842edd3532729a2ad55c4160ffcfa3700e0d54be496b70dd43",
"sha256:39574d6370c4579d7f5d0ad940ce5b20db0e4117444e39b6d8f99db5676c52fd",
"sha256:399600947b170270e80134ac854e21b3ccdefa11a9529a3decc1327088180f10",
"sha256:3a476189be23c3686bc2f4321dd501cb329c0a0469e77b7b534ee10129ae6374",
"sha256:3ad9fe1dae4ab4212d8c91e80b832425e24f421703b5a42ef2e4a1e215aff051",
"sha256:3bc570d6c01c206c46deb6e935a260be44f186a2f05179f52f7fcd2be086a94d",
"sha256:3dbd8cbadd46984f802f6d479b7e3afa86c42d13e8f0f322d669d79722c8ec34",
"sha256:3e6f39af2eab0118338902798b5aa6664f46ff66bc0280de76fca67a7f262a49",
"sha256:3f53fa183d53a1d7a8852277c92b967ae99c2d4dcee2bfacff8868e6e30b15f7",
"sha256:3f6d37644155fb5beca5378feb8c1708d5783145f2a0f1c4d5a061a210254844",
"sha256:3f7eb7da0eb23aa2ba036d4f616d46906013a68caf61b7fdbe42fc8b25132e77",
"sha256:3fa0b59c92278b5a7800d3ee7733da9d096d4aabcfabb9a928918bd276ef9b9b",
"sha256:421e29339983e1bebc281fab40d812742268ad057db4aee8c4d2bce0af43b741",
"sha256:4b943d3668d61cfa528eb949577479d3b077fd25fb83c641235437bc0b5bc60e",
"sha256:526e86aced14a65a5b0ec50827c745597c782ff46b571dbfe46192ab9e0b3c33",
"sha256:52e06553899e11e8074503c8e716d574adeeb7e68913115c4b3653c53f9bae42",
"sha256:544364b2b51a9b0c7000a4b4b02f90e9423d97fbbf7e06689236443ebcad81ab",
"sha256:5524298e3827105b61951a29c3512deb9578586abf3a7c5da4a8069df247cccc",
"sha256:55c7475190662e202c08c6c0f4d9e345a29367438cf8e8037f3155e10a88d5a5",
"sha256:563b116874a9a7ce6f96f87cd0b94f7faf92d08d0021e837796f0a14318ef8da",
"sha256:57ca5281a8b5e27593cb7d82c2ac927ad88a96ed406aa446f6344e4328208e9e",
"sha256:5c85794a4cfa094714fb9c08d4a218375b2b95b8ed1666e8677c349906246c05",
"sha256:5f3bde70f157f84ece3765b42b4a52c6ac1a50334903c6eaf765362f6ccca88a",
"sha256:5f3f58818dc0b07f7d9aa7fe9eb1037aecb9700e63e1f6acfed13e9fef648f5d",
"sha256:5fac835b4ab3c6487b5dbad78c4b3724e26bcc468e886f8ba8cc4306f68f6701",
"sha256:620bae625f4cb18427b1bb1a2d9426dc0dd5a5ba74c7c2cdb9de405f7b129863",
"sha256:672b8adf25b1a0d35c96b5888b7b18699d27d4194bac8beeae75be4b7a3fc9b2",
"sha256:6aae418a8b323732fa89721d86f39ec8f092fc2af67f4217a2b07fd3e93c6101",
"sha256:6c3631058c37e4a0ec440bf583bc53cdbd13e5661bb6f465bc1d88ee9a0a4d02",
"sha256:6c9c9262f454d1c4d8aaa7050121eb4f3aea197360553699520767daebf2180b",
"sha256:6e43d39a741e972bab5d8100b5cdacf69db64e34eb19b6e9af162bccf63c5cc6",
"sha256:7365b92c2e69ee952902e8f70f3ba6360d0d596d9299d55d7d386df84b6941fb",
"sha256:743185e7372b7bc7c389e1badcc606931a827112fbbd37f14c537320fca08620",
"sha256:74472234c8370669850e1c312490f6026d132ca2d396abfad8830b4f1c096957",
"sha256:74d5012b7630714b66be7b7b7a78855ef7ad58e8650c73afc4c076a1f480a8d6",
"sha256:77a13aea58bc2b90173bc69f2a90de8e282648939a00a602e1dc4ee23e26b66d",
"sha256:79ff6c6eadf2e3fc0d7786331362e6ef1e51125892c75f1004bd6b52155fb956",
"sha256:831a62658609f0e5c64178211c942ace999517f5770fe9436be4c2faeba0c0ef",
"sha256:836398932192dae4146c8f6f737d74baeac8b70ce14831a239bdb1ca882fc261",
"sha256:842178b126593addc05acf6fce960d28bc5fae7afbaa2c6c1b3a7b9460e5be02",
"sha256:8526e8f916bb5b9a0a777c8317c23ce65de259422bba5b31325a6fa6029d33af",
"sha256:859e43a1951717cc8de7f4c77674a6d389b106361585951d9e69572823f311d9",
"sha256:88863fbbc1a7312972f1c511f202eb30866370ebb8493aef2812b9ff28156a21",
"sha256:89eef07eee5e9d1fda06e38822ad167a044153457e6fd997f8a858ab7564a336",
"sha256:8c89f9f2f740a6b7dcc753140dd5e1ab9215966f7a3530d0c0705c83b401bd7d",
"sha256:8c91ed27800188c2ae96d16e3149f199d62f86c7af5f5f4d2c61a3ed8cd3666c",
"sha256:8ca65483439f9c791897f7db49202301deb6e15fe9f8fe2fed555bf986d10c31",
"sha256:8fbe85cb3201c7d380d3d0b90e63d520f15d6afe217165d7f98c9c649654db81",
"sha256:91d4c9a823a8c987cce8fa2690923b069966dabb196dd8d137ea2cede885fde9",
"sha256:9bb9f66367023ae783551042d31b1d7fd422e8289eedd91f26754a66f44d5cff",
"sha256:a173cb5c16c4f40ab19cecf48a534c409f7ea983ab8fed0741304a1c0a31b3f2",
"sha256:a36d8efe0f290835fd0f33da35042a1bb5dc0e83cbc092dcf69bce442579e88e",
"sha256:a55f3e9e493158d7bfdb60a1165035f1cf7d320914e7b7ea83fe22c6023b58fc",
"sha256:a625815d4a2bdca61953dbba5a39d60164451ef34c88d751f6c368c3ea73d404",
"sha256:a916a2932da8f8ab582f242c065f5c81bed3462849ca79ee357dd9551b0e9b01",
"sha256:ac3cc5759570cd02662b15fbcd9d917f7ecd47efe0d6b40474eafd246f91ea18",
"sha256:acb08650863767cbc58bca4813b92df4d6c648459dcaa3d4155681962b2aa2d3",
"sha256:aebfd0861a83e6c3d1110b78ad54704486555246e542be3e2bb94195eabb2606",
"sha256:afaeff7696e0ad9f02cbb8f56365ff4686ab205fcf9c4c5b6fdfaaa16549dd04",
"sha256:b27cf2eb1dda37b2089e3907d8ea92922b673c0c427886d4edc6b94d8dfe5db3",
"sha256:b2cd9e04277e756a2e2d2543d65d1e2166d6fd4c9b183f8808634fda23f17b14",
"sha256:b9c4702f29ca48e023ffd9b7ff6b822acdf47cb1ff44cb490a3f1d5ec8987e9c",
"sha256:bbe1ef33d45bc71cf21364df962af171f96ecaeca06bd9e3d0b583efb12aec82",
"sha256:bd404be08018c37350f0d6e34676bd1e2889990117a2b90070b3007f172d0610",
"sha256:bf0a91bfb5574a2f7fc223cf95eeea79abfefa404bf1ea5e339c0c1560ae99a0",
"sha256:bfb5862016acc9b869bb57284e6cb35fdf8e22fe59f7548858e2f971d045f150",
"sha256:bfff9740c69c0e4ed32416f013f3c45e2ae42ccedd1167ef2d805c000b6c71a5",
"sha256:c1f5210f1b8fc91ead1283c6fd89f70e76fb07283ec738056cf34d51e9c1d62c",
"sha256:c2047d0b6cea13b3316bdbafbfa0c4228ae593d995030fda39089d36e64fc03a",
"sha256:c22c776292a23bfc7237a98f791b9ad3144b02116ff10d820829ce62dff46d0b",
"sha256:c755367e51db90e75b19454b680903631d41f9e3607fbd941d296a020c2d752d",
"sha256:c882d69f6903ef6092bedfb7be973d9319940d56b8427ab9187d1ecd73438a70",
"sha256:cb467c999c2eff23a6417e58d75e5828716f42ed8289fe6b77a7e5a91036ca70",
"sha256:cdab464fee731e0884c35ae3588514a9bcf718d0e2c82169c1c4a85cc19c3c7f",
"sha256:ce19e06cbda693e9e7686358af9cd6f5d61312ab8b00488bc36f5aabbaf77e24",
"sha256:ce70f96a46b894b36eba678f153f052967a0d06d5b5a19b336ab0dbbd029f73e",
"sha256:cf57a27fb986c6243d2ee78392c503826056ffe0287e8794503b10fb51b881be",
"sha256:d1715143123baeeaeadec0528bb7441103979a1d5f6fd0e1f915383fea7ea6d5",
"sha256:d6ff426a7cb54f310d51bfe83fe9f2bbe40d540c741dc974ebc30e6aa238f52e",
"sha256:d7e7067c98040d646982daa1f37a33d3544138ea155536c2e0e63e07ff8a7e0f",
"sha256:db476ab59b6765134de1d4fe96a1a9c96ddf091683599be0f26147ea1b2e4b88",
"sha256:dcc5c24523771db3a294c77d94771abcfcb82a0e0ee8efd910c37c59ec1b31bb",
"sha256:de6da501c883f58ad50db3a32ad397b09ad29865b5f26f64c24d3e3281685849",
"sha256:e84087b432b6ac94778de547e08611266f1f8ffad28c0ee4c82e028b0fc5966d",
"sha256:eef58232d32daf2ac67f42dea51a2c80f0d03379075d44a587051e63cc2e368c",
"sha256:f096076119da54a6080e8920cbdaac3dbee667eb91dcc5e5b78840b87415bd44",
"sha256:f0ab1c1af0cb38e3f598244c17919fb1a84d1629cc08355b0074b6d7f53138ac",
"sha256:f27db948078f3823a6bb3b465180db8ebecf26dd5dae6f6180bd87383b6b4428",
"sha256:f537afb3276d12814082a2e9b242bdcf416c2e8fd9f799a737990a1dbe906e5b",
"sha256:f57b396167a2565a4e8b5e56a5a1c537571733992b226f4f1197d79e94cf0ae5",
"sha256:f8979280bdafff686ba5e4d8f97840f929a87ed9cdf133cbbd42f7766774d2aa",
"sha256:f9a2ae5c91cecc9edd47e041a930490c31c3afb1f5e6d71de3dc671bfaca02bf"
],
"index": "pypi",
"version": "==1.1.1"
},
"websocket-client": {
"hashes": [
"sha256:9e813624b6eb619999a97dc7958469217c3176312b3a16a4bd1bc7e08a46ec98",
"sha256:af248a825037ef591efbf6ed20cc5faa03d3b47b9e5a2230a529eeee1c1fc3ef"
],
"markers": "python_version >= '3.9'",
"version": "==1.9.0"
},
"wsproto": {
"hashes": [
"sha256:61eea322cdf56e8cc904bd3ad7573359a242ba65688716b0710a5eb12beab584",
"sha256:b86885dcf294e15204919950f666e06ffc6c7c114ca900b060d6e16293528294"
],
"markers": "python_version >= '3.10'",
"version": "==1.3.2"
}
},
"develop": {
"iniconfig": {
"hashes": [
"sha256:c76315c77db068650d49c5b56314774a7804df16fee4402c1f19d6d15d8c4730",
"sha256:f631c04d2c48c52b84d0d0549c99ff3859c98df65b3101406327ecc7d53fbf12"
],
"markers": "python_version >= '3.10'",
"version": "==2.3.0"
},
"packaging": {
"hashes": [
"sha256:00243ae351a257117b6a241061796684b084ed1c516a08c48a3f7e147a9d80b4",
"sha256:b36f1fef9334a5588b4166f8bcd26a14e521f2b55e6b9de3aaa80d3ff7a37529"
],
"markers": "python_version >= '3.8'",
"version": "==26.0"
},
"pluggy": {
"hashes": [
"sha256:7dcc130b76258d33b90f61b658791dede3486c3e6bfb003ee5c9bfb396dd22f3",
"sha256:e920276dd6813095e9377c0bc5566d94c932c33b27a3e3945d8389c374dd4746"
],
"markers": "python_version >= '3.9'",
"version": "==1.6.0"
},
"pygments": {
"hashes": [
"sha256:636cb2477cec7f8952536970bc533bc43743542f70392ae026374600add5b887",
"sha256:86540386c03d588bb81d44bc3928634ff26449851e99741617ecb9037ee5ec0b"
],
"markers": "python_version >= '3.8'",
"version": "==2.19.2"
},
"pytest": {
"hashes": [
"sha256:711ffd45bf766d5264d487b917733b453d917afd2b0ad65223959f59089f875b",
"sha256:75186651a92bd89611d1d9fc20f0b4345fd827c41ccd5c299a868a05d70edf11"
],
"index": "pypi",
"version": "==9.0.2"
}
}
}
+30 -24
View File
@@ -1,37 +1,43 @@
# led-controller
LED controller web app for managing profiles, tabs, presets, and colour palettes, and sending commands to LED devices over the serial -> ESP-NOW bridge.
ESP32-S3 controller for LED drivers: W5500 Ethernet, web UI, I2S microphone beat detection and an ESP-NOW link to the drivers. The firmware lives in [`v2/`](v2/); see [`v2/docs/BENCH_TEST.md`](v2/docs/BENCH_TEST.md) for the bench tests.
## Run
## Build and flash
- One-time setup for port 80 without root: `sudo scripts/setup-port80.sh`
- Start app: `pipenv run run`
- Dev watcher (auto-restart on `src/` changes): `pipenv run dev`
- Regenerate **`docs/help.pdf`** from **`docs/help.md`**: `pipenv run help-pdf` (requires **pandoc** and **chromium** on the host)
```bash
make build # minify the web UI from v2/web, then build the firmware (ESP-IDF in Docker)
make flash # flash over USB
make ota HOST=<ip> # update firmware (web UI included) over Ethernet, no USB (POST /ota)
make monitor # serial console
make test # driver unit tests and the C/Python envelope cross-check
```
## UI modes
`make` lists every target. The web UI sources are in `v2/web/` (`static/`, `templates/`, `audio.html`).
- **Run mode**: focused control view. Select tabs/presets and apply profiles. Editing actions are hidden.
- **Edit mode**: management view. Shows Tabs, Presets, Patterns, Colour Palette, and Send Presets controls, plus per-tile preset edit/remove and drag-reorder.
## Other directories
## Profiles
- `led-driver/` (submodule): MicroPython firmware for the ESP32 LED drivers.
- `led-tool/` (submodule): `led-cli`, configures drivers over serial and updates the controller over Ethernet (`led-cli --ota HOST`).
- `led-simulator/` (submodule), `espnow-sender/`: test helpers.
- `db/`: stored zones, presets and devices, importable with `PUT /db/<name>`.
- Applying a profile updates session scope and refreshes the active zone content.
- In **Run mode**, Profiles supports apply-only behavior (no create/clone/delete).
- In **Edit mode**, Profiles supports create/clone/delete.
- Creating a profile always creates a populated `default` zone (starter presets).
- Optional **DJ zone** seeding creates:
- `dj` zone bound to device name `dj`
- starter DJ presets (rainbow, single colour, transition)
## Docs
## Preset colours and palette linking
- API reference: `docs/API.md`
- User guide: `docs/help.md` (`scripts/build_help_pdf.sh` regenerates `docs/help.pdf`)
- Specification: `docs/SPECIFICATION.md`
- In preset editor, selecting a colour picker value auto-adds it when the picker closes.
- Use **From Palette** to add a palette-linked preset colour.
- Linked colours are stored as palette references and shown with a `P` badge.
- When profile palette colours change, linked preset colours update across that profile.
## Network
## API docs
The controller advertises `<hostname>.local` over mDNS (default `led-controller`, plus an `_http._tcp` service). Both settings below come from `/settings` and apply on reboot.
- Main API reference: `docs/API.md`
`static_ips` is a list of networks to try, in order, each time the Ethernet link comes up. The first entry whose gateway answers ARP is used; if none does (or the list is empty) the controller uses DHCP. `netmask` defaults to `255.255.255.0`, `dns` to the gateway.
```bash
curl -X PUT http://led-controller.local/settings/settings -H 'Content-Type: application/json' -d '{
"hostname": "stage",
"static_ips": [
{"ip": "192.168.1.50", "netmask": "255.255.255.0", "gw": "192.168.1.1"},
{"ip": "10.0.0.50", "netmask": "255.255.255.0", "gw": "10.0.0.1"}
]}'
```
+1 -1
View File
@@ -1 +1 @@
{"f0f5bdfb9d30": {"id": "f0f5bdfb9d30", "name": "a", "type": "led", "transport": "wifi", "address": "10.1.1.182", "default_pattern": null, "zones": []}, "188b0e1560a8": {"id": "188b0e1560a8", "name": "a", "type": "led", "transport": "wifi", "address": "10.1.1.242", "default_pattern": null, "zones": []}, "24ec4acaffcc": {"id": "24ec4acaffcc", "name": "c", "type": "led", "transport": "wifi", "address": "10.1.1.171", "default_pattern": null, "zones": []}}
{"e8f60a16e074": {"id": "e8f60a16e074", "name": "mirror", "type": "led", "transport": "wifi", "address": "192.168.1.199", "default_pattern": null, "zones": []}, "e8f60a16d51c": {"id": "e8f60a16d51c", "name": "mirror", "type": "led", "transport": "wifi", "address": "192.168.1.77", "default_pattern": null, "zones": []}, "e8f60a170d68": {"id": "e8f60a170d68", "name": "mirror", "type": "led", "transport": "wifi", "address": "192.168.1.217", "default_pattern": null, "zones": []}, "588c81a1182c": {"id": "588c81a1182c", "name": "dj", "type": "led", "transport": "wifi", "address": "192.168.1.114", "default_pattern": null, "zones": []}, "dcb4d99988c8": {"id": "dcb4d99988c8", "name": "roof", "type": "led", "transport": "wifi", "address": "192.168.1.158", "default_pattern": null, "zones": []}, "48f6ee2097c0": {"id": "48f6ee2097c0", "name": "roof", "type": "led", "transport": "wifi", "address": "192.168.1.246", "default_pattern": null, "zones": []}, "48f6ee211d8c": {"id": "48f6ee211d8c", "name": "roof", "type": "led", "transport": "wifi", "address": "192.168.1.55", "default_pattern": null, "zones": []}, "dcb4d99b0e34": {"id": "dcb4d99b0e34", "name": "roof", "type": "led", "transport": "wifi", "address": "192.168.1.167", "default_pattern": null, "zones": []}, "588c81a337fc": {"id": "588c81a337fc", "name": "inner", "type": "led", "transport": "wifi", "address": "192.168.1.110", "default_pattern": null, "zones": []}, "588c81a32e1c": {"id": "588c81a32e1c", "name": "outer", "type": "led", "transport": "wifi", "address": "192.168.1.250", "default_pattern": null, "zones": []}, "e8f60a16f288": {"id": "e8f60a16f288", "name": "mirror", "type": "led", "transport": "wifi", "address": "192.168.1.249", "default_pattern": null, "zones": []}, "e4b323c53870": {"id": "e4b323c53870", "name": "speaker1", "type": "led", "transport": "wifi", "address": "192.168.1.23", "default_pattern": null, "zones": []}, "e8f60a16eba4": {"id": "e8f60a16eba4", "name": "speaker2", "type": "led", "transport": "wifi", "address": "192.168.1.31", "default_pattern": null, "zones": []}, "e8f60a1707c0": {"id": "e8f60a1707c0", "name": "speaker3", "type": "led", "transport": "wifi", "address": "192.168.1.134", "default_pattern": null, "zones": []}, "e8f60a16fb14": {"id": "e8f60a16fb14", "name": "speaker4", "type": "led", "transport": "wifi", "address": "192.168.1.30", "default_pattern": null, "zones": []}, "e8f60a16e57c": {"id": "e8f60a16e57c", "name": "speaker5", "type": "led", "transport": "wifi", "address": "192.168.1.63", "default_pattern": null, "zones": []}, "e8f60a16f1b4": {"id": "e8f60a16f1b4", "name": "speaker6", "type": "led", "transport": "wifi", "address": "192.168.1.224", "default_pattern": null, "zones": []}, "e4b323c5ad6c": {"id": "e4b323c5ad6c", "name": "speaker7", "type": "led", "transport": "wifi", "address": "192.168.1.94", "default_pattern": null, "zones": []}, "588c81a200d8": {"id": "588c81a200d8", "name": "speaker8", "type": "led", "transport": "wifi", "address": "192.168.1.122", "default_pattern": null, "zones": []}, "a085e34efaec": {"id": "a085e34efaec", "name": "alleyway", "type": "led", "transport": "wifi", "address": "192.168.1.22", "default_pattern": null, "zones": []}, "e8f60a16f94c": {"id": "e8f60a16f94c", "name": "speaker10", "type": "led", "transport": "wifi", "address": "192.168.1.195", "default_pattern": null, "zones": []}, "e8f60a1701a8": {"id": "e8f60a1701a8", "name": "speaker9", "type": "led", "transport": "wifi", "address": "192.168.1.179", "default_pattern": null, "zones": []}}
+1
View File
@@ -0,0 +1 @@
{}
+1 -54
View File
@@ -1,54 +1 @@
{
"on": {
"min_delay": 10,
"max_delay": 10000,
"max_colors": 1
},
"off": {
"min_delay": 10,
"max_delay": 10000,
"max_colors": 0
},
"rainbow": {
"n1": "Step Rate",
"min_delay": 10,
"max_delay": 10000,
"max_colors": 0
},
"transition": {
"min_delay": 10,
"max_delay": 10000,
"max_colors": 10
},
"chase": {
"n1": "Colour 1 Length",
"n2": "Colour 2 Length",
"n3": "Step 1",
"n4": "Step 2",
"min_delay": 10,
"max_delay": 10000,
"max_colors": 2
},
"pulse": {
"n1": "Attack",
"n2": "Hold",
"n3": "Decay",
"min_delay": 10,
"max_delay": 10000,
"max_colors": 10
},
"circle": {
"n1": "Head Rate",
"n2": "Max Length",
"n3": "Tail Rate",
"n4": "Min Length",
"min_delay": 10,
"max_delay": 10000,
"max_colors": 2
},
"blink": {
"min_delay": 10,
"max_delay": 10000,
"max_colors": 10
}
}
{"on": {"min_delay": 10, "max_delay": 10000, "max_colors": 1}, "off": {"min_delay": 10, "max_delay": 10000, "max_colors": 0}, "rainbow": {"n1": "Step Rate", "min_delay": 10, "max_delay": 10000, "max_colors": 0}, "colour_cycle": {"n1": "Step Rate", "min_delay": 10, "max_delay": 10000, "max_colors": 10}, "transition": {"min_delay": 10, "max_delay": 10000, "max_colors": 10}, "chase": {"n1": "Colour 1 Length", "n2": "Colour 2 Length", "n3": "Step 1", "n4": "Step 2", "min_delay": 10, "max_delay": 10000, "max_colors": 2}, "pulse": {"n1": "Attack", "n2": "Hold", "n3": "Decay", "min_delay": 10, "max_delay": 10000, "max_colors": 10}, "circle": {"n1": "Head Rate", "n2": "Max Length", "n3": "Tail Rate", "n4": "Min Length", "min_delay": 10, "max_delay": 10000, "max_colors": 2}, "blink": {"min_delay": 10, "max_delay": 10000, "max_colors": 10}, "flicker": {"n1": "Min brightness", "min_delay": 10, "max_delay": 10000, "max_colors": 10}, "flame": {"n1": "Min brightness", "n2": "Breath period (ms)", "n3": "Spark gap min (ms, 0=default 10\u201330 s, -1=off)", "n4": "Spark gap max (ms)", "min_delay": 10, "max_delay": 10000, "max_colors": 10}, "twinkle": {"n1": "Twinkle activity (1\u2013255, higher = more changes)", "n2": "Density (0\u2013255, higher = more of the strip lit)", "n3": "Min adjacent LEDs per twinkle (same as max for fixed length)", "n4": "Max adjacent LEDs per twinkle (same as min for fixed length)", "min_delay": 84, "max_delay": 10000, "max_colors": 10}, "radiate": {"n1": "Node spacing (LEDs)", "n2": "Out time (ms)", "n3": "In time (ms)", "min_delay": 10, "max_delay": 10000, "max_colors": 2}, "meteor_rain": {"n1": "Tail length", "n2": "Speed (LEDs per frame)", "n3": "Fade amount (1-255)", "min_delay": 10, "max_delay": 10000, "max_colors": 10}, "scanner": {"n1": "Eye width", "n2": "End pause (frames)", "min_delay": 10, "max_delay": 10000, "max_colors": 10}, "gradient_scroll": {"n1": "Scroll step rate", "min_delay": 10, "max_delay": 10000, "max_colors": 10}, "comet_dual": {"n1": "Tail length", "n2": "Speed", "n3": "Gap", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "sparkle_trail": {"n1": "Spark density", "n2": "Decay", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "wave": {"n1": "Wavelength", "n2": "Amplitude", "n3": "Drift speed", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "plasma": {"n1": "Scale", "n2": "Speed", "n3": "Contrast", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "segment_chase": {"n1": "Segment size", "n2": "Phase step", "n3": "Segment phase offset", "n4": "Gap per segment", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "bar_graph": {"n1": "Level percent", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "breathing_dual": {"n1": "Phase offset", "n2": "Ease", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "strobe_burst": {"n1": "Burst count", "n2": "Burst gap", "n3": "Cooldown", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "rain_drops": {"n1": "Drop rate", "n2": "Ripple width", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "fireflies": {"n1": "Count", "n2": "Twinkle speed", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "clock_sweep": {"n1": "Hand width", "n2": "Marker interval", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "marquee": {"n1": "On length", "n2": "Off length", "n3": "Step", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "aurora": {"n1": "Band count", "n2": "Shimmer", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "snowfall": {"n1": "Flake density", "n2": "Fall speed", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "heartbeat": {"n1": "Pulse 1 ms", "n2": "Pulse 2 ms", "n3": "Pause ms", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "orbit": {"n1": "Orbit count", "n2": "Base speed", "max_colors": 10, "min_delay": 10, "max_delay": 10000}, "palette_morph": {"n1": "Morph ms", "n2": "Warp rate", "n3": "Turbulence", "max_colors": 10, "min_delay": 10, "max_delay": 10000}}
+1 -1
View File
@@ -1 +1 @@
{"1": {"name": "on", "pattern": "on", "colors": ["#FFFFFF"], "brightness": 255, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "2": {"name": "off", "pattern": "off", "colors": [], "brightness": 0, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "3": {"name": "rainbow", "pattern": "rainbow", "colors": [], "brightness": 255, "delay": 100, "auto": true, "n1": 2, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "4": {"name": "transition", "pattern": "transition", "colors": ["#FF0000", "#00FF00", "#0000FF", "#FFFFFF", "#0000FF", "#FFFF00"], "brightness": 255, "delay": 5000, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1", "palette_refs": [null, null, null, 6, 2, 3]}, "5": {"name": "chase", "pattern": "chase", "colors": ["#FF0000", "#0000FF"], "brightness": 255, "delay": 200, "auto": true, "n1": 5, "n2": 5, "n3": 1, "n4": 1, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "6": {"name": "pulse", "pattern": "pulse", "colors": ["#00FF00"], "brightness": 255, "delay": 500, "auto": true, "n1": 1000, "n2": 500, "n3": 1000, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "7": {"name": "circle", "pattern": "circle", "colors": ["#FFA500", "#800080"], "brightness": 255, "delay": 200, "auto": true, "n1": 2, "n2": 10, "n3": 2, "n4": 5, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "8": {"name": "blink", "pattern": "blink", "colors": ["#FF0000", "#00FF00", "#0000FF", "#FFFF00"], "brightness": 255, "delay": 1000, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "9": {"name": "warm white", "pattern": "on", "colors": ["#FFF5E6"], "brightness": 200, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "10": {"name": "cool white", "pattern": "on", "colors": ["#E6F2FF"], "brightness": 200, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "11": {"name": "red", "pattern": "on", "colors": ["#FF0000"], "brightness": 255, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "12": {"name": "blue", "pattern": "on", "colors": ["#0000FF"], "brightness": 255, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "13": {"name": "rainbow slow", "pattern": "rainbow", "colors": [], "brightness": 255, "delay": 150, "auto": true, "n1": 1, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "14": {"name": "pulse slow", "pattern": "pulse", "colors": ["#FF6600"], "brightness": 255, "delay": 800, "auto": true, "n1": 2000, "n2": 1000, "n3": 2000, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "15": {"name": "blink red green", "pattern": "blink", "colors": ["#FF0000", "#00FF00"], "brightness": 255, "delay": 500, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "30": {"name": "rainbow slow", "pattern": "rainbow", "colors": [], "brightness": 255, "delay": 150, "auto": true, "n1": 1, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "31": {"name": "DJ Rainbow", "pattern": "rainbow", "colors": [], "brightness": 220, "delay": 60, "n1": 12, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "32": {"name": "DJ Single Color", "pattern": "on", "colors": ["#ff00ff"], "brightness": 220, "delay": 100, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "33": {"name": "DJ Transition", "pattern": "transition", "colors": ["#ff0000", "#00ff00", "#0000ff"], "brightness": 220, "delay": 250, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "34": {"name": "DJ Rainbow", "pattern": "rainbow", "colors": [], "brightness": 220, "delay": 60, "n1": 12, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "35": {"name": "DJ Single Color", "pattern": "on", "colors": ["#ff00ff"], "brightness": 220, "delay": 100, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "36": {"name": "DJ Transition", "pattern": "transition", "colors": ["#ff0000", "#00ff00", "#0000ff"], "brightness": 220, "delay": 250, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "37": {"name": "tranistion2", "pattern": "transition", "colors": ["#FF0000", "#FFFF00", "#FF00FF"], "brightness": 128, "delay": 1000, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1", "palette_refs": [0, 3, 4]}}
{"1": {"name": "on", "pattern": "on", "colors": [], "brightness": 32, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1", "palette_refs": []}, "2": {"name": "off", "pattern": "off", "colors": [], "brightness": 0, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "3": {"name": "rainbow", "pattern": "rainbow", "colors": [], "brightness": 32, "delay": 100, "auto": true, "n1": 2, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1", "palette_refs": []}, "4": {"name": "transition", "pattern": "transition", "colors": ["#0000FF", "#FF00FF", "#FF0000", "#00FF00", "#FFFF00", "#00FFFF"], "brightness": 32, "delay": 5000, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1", "palette_refs": [2, 4, 0, 1, 3, 5]}, "5": {"name": "chase", "pattern": "chase", "colors": ["#006b12", "#2b02c0"], "brightness": 66, "delay": 150, "auto": true, "n1": 4, "n2": 4, "n3": 5, "n4": 1, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1", "palette_refs": [null, null]}, "6": {"name": "pulse", "pattern": "pulse", "colors": ["#f5e400"], "brightness": 255, "delay": 300, "auto": true, "n1": 200, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1", "palette_refs": [null]}, "7": {"name": "circle", "pattern": "circle", "colors": ["#ffbb00", "#000000"], "brightness": 64, "delay": 10, "auto": true, "n1": 25, "n2": 120, "n3": 27, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1", "palette_refs": [null, 7]}, "8": {"name": "blink", "pattern": "blink", "colors": ["#FF0000", "#00FF00", "#0000FF", "#FFFF00"], "brightness": 255, "delay": 1000, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "9": {"name": "warm white", "pattern": "on", "colors": ["#FFF5E6"], "brightness": 255, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1", "palette_refs": [null]}, "10": {"name": "cool white", "pattern": "on", "colors": ["#E6F2FF"], "brightness": 200, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "11": {"name": "red", "pattern": "on", "colors": ["#FF0000"], "brightness": 64, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1", "palette_refs": [null]}, "12": {"name": "blue", "pattern": "on", "colors": ["#0000FF"], "brightness": 255, "delay": 100, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "13": {"name": "rainbow slow", "pattern": "rainbow", "colors": [], "brightness": 255, "delay": 150, "auto": true, "n1": 1, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "14": {"name": "pulse slow", "pattern": "pulse", "colors": ["#FF6600", "#FF00FF", "#FFFF00"], "brightness": 127, "delay": 100, "auto": true, "n1": 2000, "n2": 1000, "n3": 1000, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1", "palette_refs": [null, 4, 3]}, "15": {"name": "blink red green", "pattern": "blink", "colors": ["#FF0000", "#00FF00"], "brightness": 255, "delay": 500, "auto": true, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "1"}, "30": {"name": "rainbow slow", "pattern": "rainbow", "colors": [], "brightness": 255, "delay": 150, "auto": true, "n1": 1, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "31": {"name": "DJ Rainbow", "pattern": "rainbow", "colors": [], "brightness": 220, "delay": 60, "n1": 12, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "32": {"name": "DJ Single Color", "pattern": "on", "colors": ["#ff00ff"], "brightness": 220, "delay": 100, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "33": {"name": "DJ Transition", "pattern": "transition", "colors": ["#ff0000", "#00ff00", "#0000ff"], "brightness": 220, "delay": 250, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "34": {"name": "DJ Rainbow", "pattern": "rainbow", "colors": [], "brightness": 220, "delay": 60, "n1": 12, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "35": {"name": "DJ Single Color", "pattern": "on", "colors": ["#ff00ff"], "brightness": 220, "delay": 100, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "36": {"name": "DJ Transition", "pattern": "transition", "colors": ["#ff0000", "#00ff00", "#0000ff"], "brightness": 220, "delay": 250, "n1": 0, "n2": 0, "n3": 0, "n4": 0, "n5": 0, "n6": 0, "n7": 0, "n8": 0, "profile_id": "2"}, "37": {"name": "tranistion2", "pattern": "transition", "colors": ["#FF0000", "#FFFF00"], "brightness": 1Line truncated
BIN
View File
Binary file not shown.
+3
View File
@@ -0,0 +1,3 @@
PRST1xœ%ÎÁ
Â0Ð_‘ñšCSµJîæ'D$¶«␍ÄÝ’¦ˆˆÿntOovæ²opxz‘´zޱ ¦P
e®µp={I’g¸ÖÇηÞãlpÍñ>¦¹mÓ ” ÎþrXŠÀ•¼�[¸Zq«l”­²S:e¯þLYn1Ñ%õ‹Ï ¥/ï
+2
View File
@@ -0,0 +1,2 @@
PRST1xњ%ОAВ …б»<·,J5\Е4␍К $84SX4Ж»‹eхеНlюШЅ B
‹+…„ЫОЬж#§,+м␍‡@ЖЏIб.сщ*Lk{ЊЖ(xJnѓХГ аjЙ°E*)°†m';ЗО©c:зОҐsЭY$‡�hЋѕuиЅ*Qлљ…В?†kJУчП=5Я
+1
View File
@@ -0,0 +1 @@
PRST1xœ%ÎA л|·, ŠÐK˜ÆP;* ␍……1Þ݉3›—ÿÿf>àø"̹ ÖØU–¢°Ä[É¥nì¬Ü8b2˜kz<Ó&Ãà½ÁB9¾œµ±·‚Ðj'vRñ ì•ƒâ•£rRÎÖZî)Ó5-ò‡Ã÷yÒ-€
+2
View File
@@ -0,0 +1,2 @@
PRST1xœEÎÁ
Â0Ð_‘9ç`«Qɯˆ”Ô®ˆ»e“RDüwsðô˜™Ë¼ÁñIИx”uS²¬p˜c­¤ü¬»J-ç‹Ã¨éþ¨LÅrï½ÃD9¾:¿uˆK„ª 9pg¥Ñ#ØÂ»Æ¾á‡Æ±qú1«ÜR¦!Mö¡Ãç ��1
+2
View File
@@ -0,0 +1,2 @@
PRST1xœ=ÎÝ
!†á[‰¯StK[¼€½‰ˆ°v*ÁTü!"º÷Ü¤Žžá�9˜¼¹4bu™VÙ…¢)…’ÿåVÎÁ…”¡÷XO“RœãÀpJöz+žr[ R2ÌäÌzäœÁÔ KªÄàE;àKõ´èÓæß¶Ð ²£:»Îø%¦p±ŽŽvn? ¼?�¨2ú
BIN
View File
Binary file not shown.
BIN
View File
Binary file not shown.
+2
View File
@@ -0,0 +1,2 @@
PRST1xœUÎÁ
Â0ЙsM5Uò+"²µ«â¦lSDÄwiNž³3‡ý@èɈPJ2–fª•Uþn×’‹.ˆ§³Ã¨éþ¨Â‹å>‡‰3½}×9ÐZ bÕ•ÄÛÀè­‘]cß�¡qh7f-·”ù’&ûÁãûF9/.
+2
View File
@@ -0,0 +1,2 @@
PRST1xœEÎÁ
Â0Ð_‘9ç`«Qɯˆ”Ô®ˆ»e“RDüwsðô˜™Ë¼ÁñIИx”uS²¬p˜c­¤ü¬»J-ç‹Ã¨éþ¨LÅrï½ÃD9¾:¿uˆK„ª 9pg¥Ñ#ØÂ»Æ¾á‡Æ±qú1«ÜR¦!Mö¡Çç �“1
BIN
View File
Binary file not shown.
+2
View File
@@ -0,0 +1,2 @@
PRST1xœ%ͽÂ0 àW©Ž5C~•&VÆ
¡@�)uª4K…xwR<}ç»Á° —ks <DjÎ)¦ …É•B™ë–¸ž¯µža;l¼×Ú{Üž9 ïÂ4×Á­ÐSt l«kævÅ[a'ì…ƒpN¦œ|ˆô}ýmðý‡-‰
+1
View File
@@ -0,0 +1 @@
PRST1xœMÎ1! †á¿b¾[=5ÌNÎnÆô@I°\€Åÿ»Å.²<oÚ¼Aîéa±?,ŽÅQ�-f‚ÂìZó…xÓþÇ·œr©°' !h~<´î-Õg…k‰÷G#_ùØ­0ùä^Ü#7-a;FX ka6ÂVØý˜K1ùKœø_Ÿ/ÐM4y
BIN
View File
Binary file not shown.
+2
View File
@@ -0,0 +1,2 @@
PRST1xœ%ͽÂ0 àW©Ž5C~•&VÆ
¡@�)uª4K…xwR<}ç»Á° —ks <DjÎ)¦ …É•B™ë–¸ž¯µža;l¼×Ú{Üž9 ïÂ4×Á­ÐSt l«kævÅ[a'ì…ƒpN¦œ|ˆô}ýmðý‡-‰
+1
View File
@@ -0,0 +1 @@
PRST1xœMÎ1! †á¿b¾[=5ÌNÎnÆô@I°\€Åÿ»Å.²<oÚ¼Aîéa±?,ŽÅQ�-f‚ÂìZó…xÓþÇ·œr©°' !h~<´î-Õg…k‰÷G#_ùØ­0ùä^Ü#7-a;FX ka6ÂVØý˜K1ùKœø_Ÿ/ÐM4y
BIN
View File
Binary file not shown.
BIN
View File
Binary file not shown.
+3
View File
@@ -0,0 +1,3 @@
PRST1xœUÎÁ‚0„áw¯=¤jú*†�
[m\[²”ƒ1¾»…ž<}ÉÌåÿ ºÁÂsŸ$P˜]Î$ño'Y`¯88ÒÚ{ô
7 ÷GŽ´”£5Fa"voX£Üšl–•bÛè2ÆvãXé*¦rªœ+—�Y’LC˜JM³·1•ºAÈo5qeî¿?ªð9±
BIN
View File
Binary file not shown.
+4
View File
@@ -0,0 +1,4 @@
PRST1xśMÎÁ‚0„áwŻ=$ű*†�
[%Y[RÚ1ľ»…^<}ÉĚĺ˙Ŕ™7�`ĺPa51rpËäŇ␍tÇĹÚ©×�Â#,ĎWtĽĺŁŞ{…™Ĺě V+�=(†Ä
®5m¶՝ίk@×B[č
·B˛oáq™sMu¶ çş1°=z\ľ?µ¦8>
+2
View File
@@ -0,0 +1,2 @@
PRST1xśmŹÁ‚0 †ßĄ\wČ`ŮMQ^Â2ĄčâÜČ1ĆřînĚ‹‰—~í—?Mű#ďüC™›F 0IďŃ™w¶ÚşÄ˛š7Ľm�ËĺMęveýuUąo<v[şć:'§.Wop
Ć ¨ĺDN)ąx » �<H¤)B2r"˘Śá@–Ć*ˇNŕ+&gGĄ±WC8<_ßĐéŽńpłhMţ”îýŹ!I°
+2
View File
@@ -0,0 +1,2 @@
PRST1xњUЋ;В0птТєp>°WAQґђ5X2Nд8BЬ;©hv¤·SМЃ_BдЙq(,њ’Др·Эg?ЗtEЕЅЦЦж­ТZіf
·иПdНJcЊВ$ћЯ “ЮТ Jq…PѓЪј…t)ПР‚є] ЁАињњw,q¶ОЛи¦\Wп­^rнЕ–є°yЇКѕ?Эh>Ў
BIN
View File
Binary file not shown.
+2
View File
@@ -0,0 +1,2 @@
PRST1xœEÎM
Â0à«Ès›Eÿ¢’ôE$¶£â¤$Ó…ˆww0 góÁ{o1o°„ŠìÊì™)Ã`õ"”Y‹6§˜r�›°ÇFgƒk÷‡0-:k␍Šþ×7~“'y#ná¥Ó™ÒÃ逇Э*ÇÊéÇšÓ-Dº„Eiñù¹L2‡
+3
View File
@@ -0,0 +1,3 @@
PRST1xœ=ŽA‚0E¯B>Û.
*š€KC*ŒØ¤¶¤Æxw�Í{™7‹y!ØÁ€)s5';9
\å1Eï¡°XfJA~mø·1ú˜2ÌußkÙÕZo^ls\®ÉÍw”å¸mµÂDÞ>a:Q»r„á´’Bh¤ Z)aW°/8tÇ‚ÓKŠ7çip“üÙàý)<¡
+3
View File
@@ -0,0 +1,3 @@
PRST1xś-ÎÁ‚0Đ_!õ‡Šdo˝ô'Ś!Ş’”–”ĺ`Ś˙î<˝ÍĚö�čfű•‹!Íž‹qs
‹cö9J·Çý?RHy]QZkŚÖ’•Zc-n
÷<=_ý*“Zk…Ń÷µrşŤ�óćbę„T ␍¨N ŮĹóA{p9čv–śSđý4Ęcľ?6Đ
+2
View File
@@ -0,0 +1,2 @@
PRST1x�5־A‚0…ב«�ַ¶ @Dׂ- —0ֶT©�X[2ֶxwG׳ש&‎»˜‚yXh°M\₪�׀��‚ֹ8…�0[
’ור/חט#%ט=ֺ¾†q”·r\…¹כ�ƒMע¥©*…ֹzף„מd5 Gh¦ֵ*„Zz+6b-1l ¿´™m¦ֻל2‎ֺLסגה"7ֹy5�־ד:G
+2
View File
@@ -0,0 +1,2 @@
PRST1xœ-ÎÁ Ð_1ã•ÔZŽúÆ´«’ 4°Õã¿»Š§7;sÙ¢»,˜
/îNP˜3å(í¿8¥�r�Ýa©õ¶ìŽÙ_®©ÈÐh­0RpOØN¢›9ÁržI!XÓˆ�ØËW„ö{­+]eSéL9�} ƒåƒ÷ªù0¿
+2
View File
@@ -0,0 +1,2 @@
PRST1x�=ЮA
Т0аЋШw�EZ5JаK�б�ZH��L"онС�Ћ7ќџѓFЄ�с!\e�е�`�I�KдќнRHЅТ�и�ЕЮсlp-ѓу)�ЋНЕzС;=i�/ee�иiІє:Sv�=МютЁсЧЦщG.щ>ОЬ�Овсѓ,�1И
BIN
View File
Binary file not shown.
+2
View File
@@ -0,0 +1,2 @@
PRST1xœ5ÎA‚0Ы�϶‹‚ˆ¦è%Œ!F �–´ÃÂïîhu6o2ÿ/æ ïV‚Sâ"Ѹ’碟\"(lŽ™¢—ø—tÿ¤Kˆ æ‚ÒZ-#·ò£µ¸*Üâ<Nì)I¥ÖZa Å=`ZYÝΆãN
¾‚i„¦0RðMæ˜i3§ÌùËÃ}^¨›ù­Âë␍Çü8÷
BIN
View File
Binary file not shown.
BIN
View File
Binary file not shown.
+2
View File
@@ -0,0 +1,2 @@
PRST1xœ5Î=Â0 †á«Tk†þQ�À%*T%Ô@¥’TŽ; ÄÝIáå±ôzðÞ¾å¨ET Ž ·JT,V•ŧšÃð·0‰ ‡Ë>¸8™OõS¨ËÒ`äÙ¾A]Zíª¤²²�¯@M¢ÎÉ7 v;÷-hã˜é2§Ìyg‘pŸf¦1ýTáû^
7˜
+3
View File
@@ -0,0 +1,3 @@
PRST1x�5ΞΝ
Β0ΰW)γ5‡ώh­Ήϊ"%ΪU5)›νAΔww5xϊ–™9μ Α=BI
v>Η%Α`q"ΔA»o<ώγK�#'Ψ#6‡²ο†'ƒ3ϋΫ]%-κ²4�hvOΨVO·J„^Ι T°M­Φ��ΐκ"l3»L›ΩgΊ Η«�iτ“ώSαύ��5%
+4
View File
@@ -0,0 +1,4 @@
PRST1xœMαÂ0 Ð_A×5CZ ´™Q~!¨ ‘BR%î€ÿŽE¦gÝÝà7¢{ ˜
ofŸiž
ÇL9JõŸÞRH¹ÀœÐX{Ô½–¬µµ£ÆYášýýÁ‘ŠL:­&
îÓËéVN0œWRˆ­dB3[Ä]e_é+‡ÊðcÉiö�.~’¿Z|¾¡ 61
+1
View File
@@ -0,0 +1 @@
PRST1xœ5ŽAƒ E¯b¾[¨U+WiŒ¡2¶¦ `š¦éÝ ’nxÌ›Y¼Œ|ùPÌÚÎ�¿ˆ60l2r&.?ýýlµuâ‚Rõ|àCt%Wuß5®n½Ýƒ!OjÎiùN¹ ÜN ¦‚¨¢35DÑ@¤é”Ñft}ÆùÀæì²jšVÓª#TSL�-)ËìZ³ôŒßQ•AÓ
+1
View File
@@ -0,0 +1 @@
PRST1xњEО1В0 Р« ПљЎiЎ ЂK „5)MЪФвоXНЂ—gщяБD72В‹lF—зВ ѓЙ‰pЋьoчR^@glOлаbpЛющ’И‹mУ ЬФлкЉ$ђдВС‚:ҐХљТЃ¬Іi/о+}еP9®L9=|а«ф‹пжg2д
+2
View File
@@ -0,0 +1,2 @@
PRST1xœ=ÎÍ
Â0àW‘é5‡ô?ìM"} ‰vÕBMJ’D|wSž¾afû†5O!rˆ;³zç␍#{›úuu³ótDQi­”N]ÑÊ^␍Öö²•�“ÀÅO÷G´Òq%¥Àȳy�ºÍ(ú•l ª¨I“­AM¦Ít™>£~,Þݦ™ÏÓ˜þ+ñùÚ¦5ó
+3
View File
@@ -0,0 +1,3 @@
PRST1x°Mна
б0 ЮW▒вз╘SzTЯ%D╓╨L╣m├┬ЬНfКе\╬ДOЫ ╦'а┌)С"┤ЬЙ°ВP3╔ ⌡©П}LЖ└Й8≈dуNЖр²╝╘©?8P√⌠Zk┘√╪{ц6р╨▒#,╖▒┌≥Жb␍k└%Л4╜
КBSь╤3C┼]ОИр╥Р≈аВ┘┘6
+2
View File
@@ -0,0 +1,2 @@
PRST1xœMÎK
Â0…á½§ÜT£’tR$Ú«âMÉc âÞm�ˆ£þ39Oˆ»3,¦2Car¥p’¿rŽ!¦ {ÀЍï‰0(œ’¿ÞŠpž‡Î…‘ƒ{À"WK„-©²‚hXMK•î;Ëú—6° ¦±mìûSŠøèÇù’Æë␍»0Ø
+4
View File
@@ -0,0 +1,4 @@
PRST1xœMÎA‚0Ы˜ï¶‹RÉ€KcŠŒBR[Ò c¼»­l\½Éÿùɼáí“ANr˜ÙFÙ
V+ÂÑçê?½b␍8ö½éj�‹Â—Ç,žS.ŒÖ
;ûµù´›�Ä�|ªL½uŨ)_ƒ
ÍN»sÞé~¬1ÜÇ×eÊ/Uø|Æœ5
BIN
View File
Binary file not shown.
+3
View File
@@ -0,0 +1,3 @@
PRST1xœ5ŽA‚0E¯B>Û.
*š€KCªŒBRÚ¦ c¼»ÅÙ¼7óÿb>ðv"0Í\D눙Š)¤8@!ZÙ’—xOºò.¤抲mµŒÜJ­W϶:n
÷4¾ö4K¹ÖZ¡'gß0�¨]8ÀpZHÁW0ÕVðõÞô˜ÇŒSF“qθlˆ)<GGÝØË«¾?ð¹<
+3
View File
@@ -0,0 +1,3 @@
PRST1xœMŽ1Â0 Eïò»fp
�(K/�
­�H!©Òt@ˆ»cÈÂô¾Ÿ¿%¿�üƒá0†2F†Âìkå’þÕ˜c. ÜÝ0 ‘¸Î‘%œ.%Üî5ñ"•Þ…‰£J&RðkÍpµ¬¬�´HA§e•6mÜÂÉQ2p_¹kØ7Øæ’¯!ò9Lò–Æû¼Ã1ó
BIN
View File
Binary file not shown.
+2
View File
@@ -0,0 +1,2 @@
PRST1xœ%ÎK
Ã0 Ы”éÖ‹$ýâ«”ÜFn Ž›PJï^ÇÖæI£Í|Áf&hlFæÃ6¹HPXLŒ$œãÀù|d…~àhË WxŠ{O‘iÍ�®iFòæÝî»I1@GI¤À-tޏ«œ*çÊ¥r­Ü*÷Â"Á:Oƒs�¶´ò”{␍Bv/ÃÉûþ÷½8ù
+1 -1
View File
@@ -1 +1 @@
{"1": {"name": "default", "type": "zones", "zones": ["1", "8"], "scenes": [], "palette_id": "1"}, "2": {"name": "test", "type": "zones", "zones": ["6", "7"], "scenes": [], "palette_id": "12"}}
{"1": {"name": "default", "type": "zones", "zones": ["1", "8", "9", "10", "11", "12", "13"], "scenes": [], "palette_id": "1"}, "2": {"name": "test", "type": "zones", "zones": ["6", "7"], "scenes": [], "palette_id": "12"}}
+1 -1
View File
@@ -1 +1 @@
{"1": {"group_name": "Main Group", "presets": ["1", "2"], "sequence_duration": 3000, "sequence_transition": 500, "sequence_loop": true, "sequence_repeat_count": 0, "sequence_active": false, "sequence_index": 0, "sequence_start_time": 0}, "2": {"group_name": "Accent Group", "presets": ["2", "3"], "sequence_duration": 2000, "sequence_transition": 300, "sequence_loop": true, "sequence_repeat_count": 0, "sequence_active": false, "sequence_index": 0, "sequence_start_time": 0}}
{"1": {"name": "Main Group", "zone_id": null, "loop": true, "repeat_count": 0, "steps": [{"preset_id": "1", "duration_s": 3.0}, {"preset_id": "2", "duration_s": 3.0}], "active": false}, "2": {"name": "Accent Group", "zone_id": null, "loop": true, "repeat_count": 0, "steps": [{"preset_id": "2", "duration_s": 2.0}, {"preset_id": "3", "duration_s": 2.0}], "active": false}}
+1 -1
View File
@@ -1 +1 @@
{"1": {"name": "default", "names": ["a", "c", "a"], "presets": [["4", "2", "7"], ["3", "14", "5"], ["8", "10", "11"], ["9", "12", "1"], ["13", "37", "6"]], "presets_flat": ["4", "2", "7", "3", "14", "5", "8", "10", "11", "9", "12", "1", "13", "37", "6"], "default_preset": "15"}, "2": {"name": "default", "names": ["1", "2", "3", "4", "5", "6", "7", "8", "0", "a"], "presets": [["16", "17", "18"], ["19", "20", "21"], ["22", "23", "24"], ["25", "26", "27"], ["28", "29", "30"]], "presets_flat": ["16", "17", "18", "19", "20", "21", "22", "23", "24", "25", "26", "27", "28", "29", "30"]}, "3": {"name": "default", "names": ["1"], "presets": [], "default_preset": null}, "4": {"name": "default", "names": ["1"], "presets": [], "default_preset": null}, "5": {"name": "dj", "names": ["dj"], "presets": [["31", "32", "33"]], "default_preset": "31", "presets_flat": ["31", "32", "33"]}, "6": {"name": "default", "names": ["1"], "presets": [], "default_preset": null}, "7": {"name": "dj", "names": ["dj"], "presets": [["34", "35", "36"]], "default_preset": "34", "presets_flat": ["34", "35", "36"]}, "8": {"name": "test", "names": ["11"], "presets": [["1", "2", "3"], ["4", "5"]], "default_preset": "1", "presets_flat": ["1", "2", "3", "4", "5"]}}
{"1": {"name": "mirror", "names": ["mirror", "mirror", "mirror", "mirror"], "presets": [["4", "2", "3"], ["14", "5", "9"], ["42", "39", "40"], ["38", "55", "43"], ["44", "45", "46"], ["64", "50", "47"], ["49", "54", "58"], ["59", "41", "57"]], "presets_flat": ["4", "2", "3", "14", "5", "9", "42", "39", "40", "38", "55", "43", "44", "45", "46", "64", "50", "47", "49", "54", "58", "59", "41", "57"], "default_preset": "5"}, "2": {"name": "default", "names": ["1", "2", "3", "4", "5", "6", "7", "8", "0", "a"], "presets": [["16", "17", "18"], ["19", "20", "21"], ["22", "23", "24"], ["25", "26", "27"], ["28", "29", "30"]], "presets_flat": ["16", "17", "18", "19", "20", "21", "22", "23", "24", "25", "26", "27", "28", "29", "30"]}, "3": {"name": "default", "names": ["1"], "presets": [], "default_preset": null}, "4": {"name": "default", "names": ["1"], "presets": [], "default_preset": null}, "5": {"name": "dj", "names": ["dj"], "presets": [["31", "32", "33"]], "default_preset": "31", "presets_flat": ["31", "32", "33"]}, "6": {"name": "default", "names": ["1"], "presets": [], "default_preset": null, "presets_flat": []}, "7": {"name": "dj", "names": ["dj"], "presets": [["34", "35", "36"]], "default_preset": "34", "presets_flat": ["34", "35", "36"]}, "8": {"name": "dj", "names": ["dj"], "presets": [["1", "2", "3"], ["4", "5", "66"], ["63", "65", "11"], ["67"]], "default_preset": "11", "presets_flat": ["1", "2", "3", "4", "5", "66", "63", "65", "11", "67"]}, "9": {"name": "roof", "names": ["roof", "roof", "roof", "roof"], "presets": [["5", "3", "42"], ["2", "1", "55"], ["4", "11", "9"], ["6"]], "default_preset": "3", "presets_flat": ["5", "3", "42", "2", "1", "55", "4", "11", "9", "6"]}, "10": {"name": "inner", "names": ["inner"], "presets": [["3", "46", "7"], ["55", "54", "37"], ["1", "2", "5"], ["6"]], "default_preset": "7", "presets_flat": ["3", "46", "7", "55", "54", "37", "1", "2", "5", "6"]}, "11": {"name": "outer", "names": ["outer"], "presets": [["3", "46", "7"], ["55", "54", "37"], ["2", "1"]], "default_preset": "46", "presets_flat": ["3", "46", "7", "55", "54", "37", "2", "1"]}, "12": {"name": "speakers", "names": ["speaker1", "speaker2", "speaker4", "speaker3", "speaker8", "speaker5", "speaker7", "speaker6", "speaker10", "speaker9"], "presets": [["4", "2", "41"], ["64", "3", "14"], ["5", "42", "40"], ["43", "45", "46"], ["47", "49", "54"], ["55", "59"]], "default_preset": "4", "presets_flat": ["4", "2", "41", "64", "3", "14", "5", "42", "40", "43", "45", "46", "47", "49", "54", "55", "59"]}, "13": {"name": "alleyway", "names": ["alleyway"], "presets": [["4", "2", "3"], ["14", "5", "9"], ["42", "39", "40"], ["38", "41", "43"], ["44", "45", "46"], ["50", "47", "49"], ["54", "55", "57"], ["58", "59"]], "default_preset": "4", "presets_flat": ["4", "2", "3", "14", "5", "9", "42", "39", "40", "38", "41", "43", "44", "45", "46", "50", "47", "49", "54", "55", "57", "58", "59"]}}
-53
View File
@@ -1,53 +0,0 @@
#!/usr/bin/env python3
import subprocess
import serial
import sys
print(sys.argv)
# Extract port (first arg if it's not a command)
commands = ["src", "lib", "ls", "reset", "follow", "db"]
port = None
if len(sys.argv) > 1 and sys.argv[1] not in commands:
port = sys.argv[1]
for cmd in sys.argv[1:]:
print(cmd)
match cmd:
case "src":
if port:
subprocess.call(["mpremote", "connect", port, "fs", "cp", "-r", ".", ":" ], cwd="src")
else:
print("Error: Port required for 'src' command")
case "lib":
if port:
subprocess.call(["mpremote", "connect", port, "fs", "cp", "-r", "lib", ":" ])
else:
print("Error: Port required for 'lib' command")
case "ls":
if port:
subprocess.call(["mpremote", "connect", port, "fs", "ls", ":" ])
else:
print("Error: Port required for 'ls' command")
case "reset":
if port:
with serial.Serial(port, baudrate=115200) as ser:
ser.write(b'\x03\x03\x04')
else:
print("Error: Port required for 'reset' command")
case "follow":
if port:
with serial.Serial(port, baudrate=115200) as ser:
while True:
if ser.in_waiting > 0: # Check if there is data in the buffer
data = ser.readline().decode('utf-8').strip() # Read and decode the data
print(data)
else:
print("Error: Port required for 'follow' command")
case "db":
if port:
subprocess.call(["mpremote", "connect", port, "fs", "cp", "-r", "db", ":" ])
else:
print("Error: Port required for 'db' command")
+88 -22
View File
@@ -2,10 +2,12 @@
This document covers:
1. **HTTP and WebSocket** exposed by the Raspberry Pi app (`src/main.py`) — profiles, presets, transport send, and related resources.
2. **LED driver JSON** — the compact message format sent over the serial→ESP-NOW bridge to devices (same logical API as ESP-NOW payloads).
1. **HTTP and WebSocket** exposed by the Raspberry Pi app (`src/main.py`) — profiles, zones, presets, transport send, pattern OTA helpers, and related resources.
2. **LED driver JSON** — the compact **v1** message format. It is sent over the **serial → ESP-NOW bridge** to ESP32 peers and as **single JSON text messages** over the **outbound WebSocket** to **Wi-Fi** drivers (same logical fields).
Default listen address: `0.0.0.0`. Port defaults to **80**; override with the `PORT` environment variable (see `pipenv run run`).
Default HTTP listen address: `0.0.0.0`. Port defaults to **80**; override with the **`PORT`** environment variable (see `pipenv run run`).
**Serial:** UART path and baud come from settings (defaults include `serial_port` such as `/dev/ttyS0` and `serial_baudrate`). **Wi-Fi drivers:** **UDP** on port **8766** is the **discovery** channel: each driver’s JSON hello (**`device_name`**, **MAC**, optional **`type`**) **creates or updates** that device in **`db/device.json`** (keyed by MAC); the Pi echoes the datagram. After a valid hello with **`v`:** **`"1"`**, the Pi also opens an **outbound WebSocket** to that IP (**`wifi_driver_ws_port`**, default **80**; **`wifi_driver_ws_path`**, default **`/ws`**) for v1 commands; presets are not pushed automatically on connect (use **Send Presets** / profile apply). The Pi may send periodic UDP **hello** nudges to known Wi‑Fi device IPs when the WebSocket is down (**`wifi_driver_hello_interval_s`** in settings).
All JSON APIs use `Content-Type: application/json` for bodies and responses unless noted.
@@ -16,7 +18,7 @@ All JSON APIs use `Content-Type: application/json` for bodies and responses unle
The main UI has two modes controlled by the mode toggle:
- **Run mode**: optimized for operation (zone/preset selection and profile apply).
- **Edit mode**: shows editing/management controls (tabs, presets, patterns, colour palette, send presets, profile management actions, **Devices** registry for LED driver names/MACs, and related tools).
- **Edit mode**: shows editing/management controls (zones, presets, patterns, colour palette, send presets, profile management actions, **Devices** registry for LED driver names/MACs, and related tools).
Profiles are available in both modes, but behavior differs:
@@ -40,7 +42,7 @@ Profiles are selected with **`POST /profiles/<id>/apply`**, which sets `current_
| Method | Path | Description |
|--------|------|-------------|
| GET | `/` | Main UI (`templates/index.html`) |
| GET | `/settings` | Settings page (`templates/settings.html`) |
| GET | `/settings/page` | Standalone settings page (`templates/settings.html`) |
| GET | `/favicon.ico` | Empty response (204) |
| GET | `/static/<path>` | Static files under `src/static/` |
@@ -50,10 +52,12 @@ Profiles are selected with **`POST /profiles/<id>/apply`**, which sets `current_
Connect to **`ws://<host>:<port>/ws`**.
- Send **JSON**: the object is forwarded to the transport (serial bridge → ESP-NOW) as JSON. Optional key **`to`**: 12-character hex MAC address; if present it is removed from the object and the payload is sent to that peer; otherwise the default destination is used.
- Send **JSON**: the object is forwarded through the **serial sender** (6-byte MAC prefix + payload to the ESP-NOW bridge). Optional key **`to`**: 12-character hex MAC address; if present it is removed from the object and the payload is sent to that peer; otherwise the default destination from settings is used.
- Send **non-JSON text**: forwarded as raw bytes with the default address.
- On send failure, the server may reply with `{"error": "Send failed"}`.
Wi-Fi devices are not targeted by `/ws` directly; use **`POST /presets/send`**, device routes, or **`POST /patterns/<name>/send`** as appropriate.
---
## HTTP API by resource
@@ -66,9 +70,10 @@ Below, `<id>` values are string identifiers used by the JSON stores (numeric str
|--------|------|-------------|
| GET | `/settings` | Full settings object (from `settings.json` / `Settings` model). |
| PUT | `/settings/settings` | Merge keys into settings and save. Returns `{"message": "Settings updated successfully"}`. |
| POST | `/reboot` | v2 controller: restart the board. Replies `{"message":"rebooting"}` first, then reboots after 0.5 s. Network settings (`hostname`, `static_ips`) apply on the next boot. |
| GET | `/settings/wifi/ap` | Saved Wi‑Fi AP fields: `saved_ssid`, `saved_password`, `saved_channel`, `active` (Pi: `active` is always false). |
| POST | `/settings/wifi/ap` | Body: `ssid` (required), `password`, `channel` (1–11). Persists AP-related settings. |
| GET | `/settings/page` | Serves `templates/settings.html` (same page as `GET /settings` from the root app, for convenience). |
| GET | `/settings/page` | Serves `templates/settings.html`. |
### Devices — `/devices`
@@ -77,11 +82,11 @@ Registry in `db/device.json`: storage key **`<id>`** (string, e.g. `"1"`) maps t
| Field | Description |
|-------|-------------|
| **`id`** | Same as the storage key (stable handle for URLs). |
| **`name`** | Shown in tabs and used in `select` keys. |
| **`name`** | Shown in the UI and used in `select` keys. |
| **`type`** | `led` (only value today; extensible). |
| **`transport`** | `espnow` or `wifi`. |
| **`address`** | For **`espnow`**: optional 12-character lowercase hex MAC. For **`wifi`**: optional IP or hostname string. |
| **`default_pattern`**, **`tabs`** | Optional, as before. |
| **`default_pattern`**, **`zones`** | Optional. Legacy **`tabs`** may still appear in old files and is migrated away on load. |
Existing records without `type` / `transport` / `id` are backfilled on load (`led`, `espnow`, and `id` = key).
@@ -89,7 +94,7 @@ Existing records without `type` / `transport` / `id` are backfilled on load (`le
|--------|------|-------------|
| GET | `/devices` | Map of device id → device object. |
| GET | `/devices/<id>` | One device, 404 if missing. |
| POST | `/devices` | Create. Body: **`name`** (required), **`type`** (default `led`), **`transport`** (default `espnow`), optional **`address`**, **`default_pattern`**, **`tabs`**. Returns `{ "<id>": { ... } }`, 201. |
| POST | `/devices` | Create. Body: **`name`** (required), **`type`** (default `led`), **`transport`** (default `espnow`), optional **`address`**, **`default_pattern`**, **`zones`**. Returns `{ "<id>": { ... } }`, 201. |
| PUT | `/devices/<id>` | Partial update. **`name`** cannot be cleared. **`id`** in the body is ignored. **`type`** / **`transport`** validated; **`address`** normalised for the resulting transport. |
| DELETE | `/devices/<id>` | Remove device. |
@@ -102,7 +107,7 @@ Existing records without `type` / `transport` / `id` are backfilled on load (`le
| GET | `/profiles/<id>` | Single profile. If `<id>` is `current`, same as `/profiles/current`. |
| POST | `/profiles` | Create profile. Body may include `name` and other fields. Optional `seed_dj_zone` (request-only) seeds a DJ zone + presets. New profiles always get a populated `default` zone. Returns `{ "<id>": { ... } }` with status 201. |
| POST | `/profiles/<id>/apply` | Sets session current profile to `<id>`. |
| POST | `/profiles/<id>/clone` | Clone profile (tabs, palettes, presets). Body may include `name`. |
| POST | `/profiles/<id>/clone` | Clone profile (zones, palettes, presets). Body may include `name`. |
| PUT | `/profiles/current` | Update the current profile (from session). |
| PUT | `/profiles/<id>` | Update profile by id. |
| DELETE | `/profiles/<id>` | Delete profile. |
@@ -143,11 +148,11 @@ Stored preset records can include:
- `colors`: resolved hex colours for editor/display.
- `palette_refs`: optional array of palette indexes parallel to `colors`. If a slot contains an integer index, the colour is linked to the current profile palette at that index.
### Tabs — `/zones`
### Zones — `/zones`
| Method | Path | Description |
|--------|------|-------------|
| GET | `/zones` | `tabs`, `zone_order`, `current_zone_id`, `profile_id` for the session-backed profile. |
| GET | `/zones` | `zones` (map of zone id → zone object), `zone_order`, `current_zone_id`, `profile_id` for the session-backed profile. |
| GET | `/zones/current` | Current zone from cookie/session. |
| POST | `/zones` | Create zone; optional JSON `name`, `names`, `presets`; can append to current profile’s zone list. |
| GET | `/zones/<id>` | Zone JSON. |
@@ -155,6 +160,9 @@ Stored preset records can include:
| DELETE | `/zones/<id>` | Delete zone; can delete `current` to remove the active zone; updates profile zone list. |
| POST | `/zones/<id>/set-current` | Sets `current_zone` cookie. |
| POST | `/zones/<id>/clone` | Clone zone into current profile. |
| POST | `/zones/<id>/play` | Body **`{"preset_id": "16", "drivers": true}`**. Runs the preset on every target in the zone through the Pi engine: pixel **outputs** are rendered on the Pi, ESP32 drivers get the preset + `select` (skipped when **`drivers`** is `false`; the UI sends to drivers itself and passes `false`). Stops any sequence on the zone. Returns the zone's player status. |
| POST | `/zones/<id>/stop` | Stops the zone's sequence and Pi rendering (pixel outputs go black). ESP32 drivers keep their current preset. |
| GET | `/zones/engine/status` | Engine state: `zones` (per-zone player: preset, pattern, error, per-output frame/packet/error counters) and `sequences`. |
### Palettes — `/palettes`
@@ -186,32 +194,90 @@ Stored preset records can include:
| PUT | `/scenes/<id>` | Update. |
| DELETE | `/scenes/<id>` | Delete. |
### Scene playback
| Method | Path | Description |
|--------|------|-------------|
| POST | `/scenes/<id>/play` | Starts every sequence listed in the scene's `sequences`. Returns `started` ids and per-sequence `errors`. |
| POST | `/scenes/<id>/stop` | Stops the scene's sequences. |
### Sequences — `/sequences`
Timed preset chains for one zone, run by the Pi engine (hard cuts). Stored in **`db/sequence.json`**:
```json
{"name": "Showcase", "zone_id": "2", "loop": true, "repeat_count": 0,
"steps": [{"preset_id": "16", "duration_s": 8}, {"preset_id": "17", "duration_s": 8}],
"active": false}
```
`duration_s` is clamped to 0.5–600 (default 5). `repeat_count` counts passes when `loop` is true (0 = forever). `active` is maintained by the engine; active sequences resume after a restart. Legacy records (`group_name`, `presets`, `sequence_duration` in ms) are migrated on load.
| Method | Path | Description |
|--------|------|-------------|
| GET | `/sequences` | All sequences. |
| GET | `/sequences/status` | Runtime state per sequence: `zone_id`, `step_index`, `preset_id`, `pass`, `next_at`, `running`, optional `error`. |
| GET | `/sequences/<id>` | One sequence. |
| POST | `/sequences` | Create; may use `group_name`, `presets` in body. |
| PUT | `/sequences/<id>` | Update. |
| DELETE | `/sequences/<id>` | Delete. |
| POST | `/sequences` | Create (body as above). 400 on invalid steps. |
| PUT | `/sequences/<id>` | Update (merged, then re-validated). |
| DELETE | `/sequences/<id>` | Stop if running, then delete. |
| POST | `/sequences/<id>/play` | Start on its zone; replaces a sequence already running there. 400 without `zone_id`/steps. |
| POST | `/sequences/<id>/stop` | Stop; the zone keeps its current preset. |
### Patterns — `/patterns`
Picking a preset manually on a zone (`/zones/<id>/play`) stops that zone's sequence.
### Outputs — `/outputs`
Pixel outputs the Pi renders frames for, stored in **`db/output.json`**. A zone drives an output when the output's **`name`** appears in the zone's `names` (the same list that holds ESP32 device names).
| Field | Notes |
|-------|-------|
| `name` | Matched against zone `names`. |
| `protocol` | `ddp` (UDP 4048), `artnet` (ArtDMX, UDP 6454), `sacn` (E1.31, UDP 5568), `dmx_serial` (USB-DMX). |
| `host`, `port` | Network outputs. `ddp` needs a host; Art-Net without host broadcasts; sACN without host uses multicast `239.255.<hi>.<lo>`. Blank port = protocol default. |
| `universe` | Art-Net/sACN start universe (sACN 1–63999). 170 RGB pixels per universe; consecutive universes are used for longer strips. |
| `serial_port`, `dmx_mode`, `channel` | USB-DMX: `enttec_pro` (Enttec DMX USB Pro) or `open_dmx` (FTDI); start channel 1–512; one universe max. |
| `pixel_count`, `pixel_offset` | Pixels this output takes from the zone frame, starting at `pixel_offset`. Outputs at offset 0 mirror the frame start. |
| `color_order`, `reverse`, `brightness`, `fps`, `enabled` | Per-output wiring order, direction, 0–255 brightness (× global brightness), frame-rate cap (default 40). |
| Method | Path | Description |
|--------|------|-------------|
| GET | `/patterns/definitions` | Contents of `pattern.json` (pattern metadata for the UI). |
| GET | `/patterns` | All pattern records. |
| GET | `/patterns/<id>` | One pattern. |
| GET | `/outputs` | All outputs. |
| GET | `/outputs/<id>` | One output. |
| POST | `/outputs` | Create; 400 with `error` on validation failure. |
| PUT | `/outputs/<id>` | Update. |
| DELETE | `/outputs/<id>` | Delete. |
| POST | `/outputs/<id>/test` | Sends red, green, blue, white (optional body `step_s`, default 1 s each) then black. Returns per-output counters. |
### Patterns — `/patterns`
Pattern metadata lives in **`db/pattern.json`**; driver source files live under **`led-driver/src/patterns/`**. Several routes expose a **runtime map** (metadata merged with on-disk `.py` names so new files appear in menus).
| Method | Path | Description |
|--------|------|-------------|
| GET | `/patterns` | Runtime pattern map (object keyed by pattern id). |
| GET | `/patterns/definitions` | Same runtime map (intended for UI “definitions” clients). |
| GET | `/patterns/ota/manifest` | JSON `{"files":[{"name":"blink.py","url":"http://<Host>/patterns/ota/file/blink.py"},...]}` for OTA pulls. Requires **`Host`** header. |
| GET | `/patterns/ota/file/<name>` | Raw **`.py`** source for one driver pattern (`name` must be a safe filename, e.g. `rainbow.py`). |
| POST | `/patterns/<name>/send` | Push a **manifest** JSON line to **Wi-Fi** devices so they pull one pattern file over HTTP. Body may include **`device_id`** to target one device; otherwise all Wi-Fi devices with an **`address`** are tried. **`<name>`** may be with or without `.py`. |
| POST | `/patterns/upload` | Body JSON: **`name`**, **`code`**, optional **`overwrite`** (default true). Writes **`led-driver/src/patterns/<name>.py`**. |
| POST | `/patterns/driver` | Body JSON: **`name`** (identifier), **`code`**, optional metadata (`min_delay`, `max_delay`, `max_colors`, `n1`…`n8`, **`overwrite`**). Creates/updates both the **`.py`** file and **`db/pattern.json`** via the Pattern model. |
| GET | `/patterns/<id>` | One pattern record from the Pattern model (metadata only). |
| POST | `/patterns` | Create (`name`, optional `data`). |
| PUT | `/patterns/<id>` | Update. |
| DELETE | `/patterns/<id>` | Delete. |
**Devices — pattern OTA push**
| Method | Path | Description |
|--------|------|-------------|
| POST | `/devices/<id>/patterns/push` | Wi-Fi only. Asks the driver at **`address`** to pull pattern files from this server. Optional body **`manifest`**: either a **URL string** pointing at a manifest JSON document, or a **manifest object** (same shape as in driver messages). If omitted, a default manifest is built from the request **`Host`** header. |
---
## LED driver message format (transport / ESP-NOW)
## LED driver message format (transport / ESP-NOW / Wi-Fi)
Messages are JSON objects. The Pi **`build_message()`** helper (`src/util/espnow_message.py`) produces the same shape sent over serial and forwarded by the ESP32 bridge.
Messages are JSON objects. The Pi **`build_message()`** helper (`src/util/espnow_message.py`) produces the same shape sent over serial and forwarded by the ESP32 bridge, and the same logical object can be sent as a **single JSON text message** to a Wi-Fi driver over the **WebSocket**.
### Top-level fields
+44 -9
View File
@@ -1,13 +1,14 @@
# LED Driver System - Specification Document
**Version:** 1.0
**Date:** December 2025
**Version:** 1.1
**Date:** October 2026
**Status:** Draft
## Table of Contents
1. [Overview](#overview)
2. [System Architecture](#system-architecture)
- [Raspberry Pi Controller and Animation Engine](#raspberry-pi-controller-and-animation-engine)
3. [User Interface Specifications](#user-interface-specifications)
4. [Feature Specifications](#feature-specifications)
5. [Preset System](#preset-system)
@@ -54,6 +55,11 @@ The LED Driver system is a MicroPython-based application for controlling LED str
- Persistent settings storage (usqlite database)
- Web-based configuration interface (Microdot web server)
- SQLite database for presets and event logging
- **Raspberry Pi controller** (`src/`): Microdot web app with JSON-file storage (`db/*.json`) managing profiles, zones, presets, palettes, scenes, sequences and outputs
- **Pi-side animation engine** (`src/engine/`): renders the unchanged driver patterns on the Pi and streams pixels over DDP, Art-Net, sACN (E1.31) or USB-DMX
- **Preset sequencer**: timed preset chains per zone, resumed after restart
- Server-wide global brightness (0-255) pushed to drivers, including on Wi-Fi reconnect
- Search filter in the Devices, Zones and Presets lists
---
@@ -225,6 +231,29 @@ The LED Driver system uses a master/slave architecture where one device acts as
---
## Raspberry Pi Controller and Animation Engine
The current deployment adds a Raspberry Pi running the web app (`src/main.py`, Microdot on CPython). It is the authoritative store and UI host; ESP32 firmware is unchanged. Full route detail is in `docs/API.md`.
**Outbound paths**
- Serial → ESP-NOW bridge (JSON lines over UART).
- Wi-Fi drivers: TCP JSON lines (port 8765 on the Pi; drivers discover the Pi via UDP 8766 broadcast).
- Pixel outputs rendered by the Pi engine (below).
**Data model (`db/*.json`):** profile, zone, preset, palette, pattern, device, scene, sequence, output. A zone's `names` list holds ESP32 device names and/or output names.
### Animation Engine (`src/engine/`)
- **Pixel generator:** loads `led-driver/src/patterns/*.py` unmodified under CPython (`utime` shim plus a NeoPixel-like buffer) and runs one render thread per zone from the same preset JSON the drivers receive. Static frames are re-sent as keepalive.
- **Output drivers:** DDP (UDP 4048), Art-Net (ArtDMX/ArtSync, UDP 6454), sACN/E1.31 (UDP 5568, multicast or unicast), USB-DMX (Enttec DMX USB Pro or Open DMX). 170 RGB pixels per universe, consecutive universes for longer strips. A preset output for our ESP32 drivers (`outputs/driver.py`) reuses the existing preset + `select` path.
- **Output record** (`db/output.json`): `name`, `protocol`, `host`, `port`, `universe`, `serial_port`, `dmx_mode`, `channel`, `pixel_count`, `pixel_offset`, `color_order`, `reverse`, `brightness` (0-255, multiplied by global brightness), `fps` (default 40), `enabled`. CRUD and a test pattern (R, G, B, W, off) at `/outputs`.
- **Zone playback:** `POST /zones/<id>/play` renders a preset on every target and sends `select` to ESP32 drivers; `POST /zones/<id>/stop` blanks pixel outputs. `GET /zones/engine/status` reports per-zone and per-output counters.
- **Sequencer:** a sequence is `{name, zone_id, loop, repeat_count, steps: [{preset_id, duration_s}], active}`. `duration_s` is clamped to 0.5-600 s (default 5); steps are hard cuts; `repeat_count` of 0 loops forever. Deadline-based scheduling, `active` sequences resume after restart, manual preset selection on a zone stops its sequence. Legacy records (`group_name`, `presets`, `sequence_duration` ms) are migrated on load. Scenes start/stop the sequences they list (`/scenes/<id>/play`, `/stop`).
- **CLI:** `python -m engine.cli --output "ddp://host?pixels=300" --test | --preset N | --pattern NAME` (terminal preview when no output is given).
- **UI:** Outputs and Sequences modals (edit mode), preset tiles drive pixel outputs, header brightness slider, list search filters.
---
## User Interface Specifications
### 1. Dashboard (Main Control Panel)
@@ -350,7 +379,7 @@ Manage connected devices and create/manage device groups.
#### Layout
- **Header:** Title with "Add Device" button
- **Tabs:** Devices and Groups tabs
- **Zones:** Devices and Groups zones (zone buttons / zone strip)
- **Content Area:** Zone-specific content
#### Devices Zone
@@ -1575,11 +1604,13 @@ peak_mem = usqlite.mem_peak()
### Flow 8: Sequence Between Presets
1. Scene activated with group having multiple presets
2. Master applies first preset to itself (if in group), sends to slaves
3. After duration expires, master transitions to next preset with fade effect
4. Process repeats for all presets, loops if enabled
5. Continues until scene changes or manual stop
*(Implemented by the Pi-side sequencer; see Animation Engine.)*
1. User plays a sequence (or a scene that lists it) on a zone
2. Pi applies the first step: renders it to the zone's pixel outputs and sends the preset + `select` to its ESP32 drivers
3. After `duration_s` expires, the sequencer hard-cuts to the next step
4. Process repeats for all steps; loops forever or for `repeat_count` passes
5. Continues until stopped, the zone is played manually, or the app restarts (active sequences then resume)
---
@@ -1649,6 +1680,10 @@ peak_mem = usqlite.mem_peak()
- Any length (1-1000 LEDs supported)
- 5V power supply (external)
**Raspberry Pi (controller):**
- Python 3.x, runs the web app and animation engine
- Optional: Wi-Fi/Ethernet to DDP, Art-Net or sACN fixtures; USB-DMX adapter (Enttec DMX USB Pro / Open DMX)
**Host Computer:**
- Python 3.x
- pipenv for dependency management
@@ -1774,7 +1809,7 @@ peak_mem = usqlite.mem_peak()
- Buttons respond to clicks
- Sliders update values
- Modals open/close
- Tabs switch correctly
- Zone buttons switch correctly
- Preset selector works
- Preset creation form validates input
- Preset cards display correctly
+28 -11
View File
@@ -1,6 +1,6 @@
# LED controller — user guide
This page describes the **main web UI** served from the Raspberry Pi app: profiles, tabs, presets, colour palettes, and sending commands to LED devices over the serial → ESP-NOW bridge.
This page describes the **main web UI** served from the Raspberry Pi app: profiles, **zones**, presets, colour palettes, and sending commands to LED devices. Traffic may go over the **serial → ESP-NOW bridge** or **Wi-Fi** (TCP to drivers on the LAN), depending on each device’s transport.
For HTTP routes and the wire format the driver expects, see **[API.md](API.md)**. For running the app locally, see the project **README**.
@@ -12,25 +12,26 @@ Figures below are **schematic** (layout and ideas), not pixel-perfect screenshot
The header has a mode toggle (desktop and mobile menu). The **label on the button is the mode you switch to** when you press it.
![Schematic: zone buttons on the left; Profiles, Tabs, Presets, Patterns, and the mode toggle on the right (example shows Edit mode with “Run mode” on the button).](images/help/header-toolbar.svg)
![Schematic: zone buttons on the left; Profiles, Zones, Presets, Patterns, and the mode toggle on the right (example shows Edit mode with “Run mode” on the button).](images/help/header-toolbar.svg)
*The active zone is highlighted. Extra management buttons appear only in Edit mode.*
| Mode | Purpose |
|------|--------|
| **Run mode** | Day-to-day control: choose a zone, tap presets, apply profiles. Management buttons are hidden. |
| **Edit mode** | Full setup: tabs, presets, patterns, colour palette, **Send Presets**, profile create/clone/delete, preset reordering, and per-tile **Edit** on the strip. |
| **Edit mode** | Full setup: zones, presets, patterns, outputs, sequences, colour palette, **Send Presets**, profile create/clone/delete, preset reordering, and per-tile **Edit** on the strip. |
**Profiles** is available in both modes: in Run mode you can only **apply** a profile; in Edit mode you can also **create**, **clone**, and **delete** profiles.
---
## Tabs
## Zones
- **Select a zone**: click its button in the top bar. The main area shows that zone’s preset strip and controls.
- **Edit mode — open zone settings**: **right-click** a zone button to change its name, **device IDs** (comma-separated), and which presets appear on the zone. Device identifiers are matched to each device’s **name** when the app builds `select` messages for the driver.
- **Tabs modal** (Edit mode): create new tabs from the header **Tabs** button. New tabs need a name and device ID list (defaults to `1` if you leave a simple placeholder).
- **Brightness slider** (per zone): adjusts **global** brightness sent to devices (`b` in the driver message), with a short debounce so small drags do not flood the link.
- **Zones modal** (Edit mode): create new zones from the header **Zones** button. New zones need a name and device ID list (defaults to `1` if you leave a simple placeholder).
- **Brightness slider** (header, and in the mobile menu): adjusts the **global** brightness (0–255) sent to devices (`b` in the driver message), with a short debounce so small drags do not flood the link. The level is stored on the server (`global_brightness`) and re-sent to Wi-Fi drivers when they reconnect; the slider position is also remembered in your browser.
- **Search**: the Devices, Zones and Presets lists have a search box that hides non-matching rows as you type. It clears when you reopen the list or press **Esc**.
---
@@ -41,7 +42,7 @@ The header has a mode toggle (desktop and mobile menu). The **label on the butto
- **Edit** beside a tile opens the preset editor for that preset, scoped to the current zone (so you can **Remove from zone** without deleting the preset from the profile).
- **Drag and drop** tiles to reorder them; order is saved for that zone.
![Schematic: zone title, brightness slider, and a row of preset tiles; Edit mode adds an Edit control and drag handles for reordering.](images/help/zone-preset-strip.svg)
![Schematic: zone title, brightness slider, and a row of preset tiles; Edit mode adds an Edit control and drag handles for reordering.](images/help/tab-preset-strip.svg)
*The slider controls global brightness for the zone’s devices. Click the coloured area of a tile to select that preset.*
@@ -68,12 +69,26 @@ The **Presets** header button (Edit mode) opens a **profile-wide** list: **Add**
## Profiles
- **Apply**: sets the **current profile** in your session. Tabs and presets you see are scoped to that profile.
- **Apply**: sets the **current profile** in your session. Zones and presets you see are scoped to that profile.
- **Edit mode — Create**: new profiles always get a populated **default** zone. Optionally tick **DJ zone** to also create a `dj` zone (device name `dj`) with starter DJ-oriented presets.
- **Clone** / **Delete**: available in Edit mode from the profile list.
---
## Outputs (Edit mode)
Besides the ESP32 drivers, the Pi can render patterns itself and stream pixels to network or DMX fixtures. **Outputs** lists these fixtures; each has a **name**, a **protocol** (DDP, Art-Net, sACN/E1.31 or USB-DMX), its address (host/port, universe or serial port), pixel count and offset, colour order, brightness and frame rate. Use **Test** on an output to flash red, green, blue and white, then black.
To drive an output from a zone, add the output's **name** to the zone's device list (the same list used for ESP32 device names). Clicking a preset tile then renders it on the Pi for those outputs and still sends `select` to any ESP32 drivers in the zone.
---
## Sequences (Edit mode)
**Sequences** are timed chains of presets that play on one zone. Each step is a preset plus a duration (0.5–600 s); steps switch with hard cuts. Choose whether the sequence **loops** (and how many passes, 0 = forever), then **Play** or **Stop** it. Picking a preset by hand on that zone stops its sequence. Running sequences resume after the app restarts, and a **scene** can start every sequence it lists.
---
## Send Presets (Edit mode)
**Send Presets** walks **every zone** in the **current profile**, collects each zone’s preset IDs, and calls **`POST /presets/send`** per zone (including each zone’s **default** preset when set). Use this to bulk-push definitions to hardware after editing, without clicking **Send** on every preset individually.
@@ -82,7 +97,9 @@ The **Presets** header button (Edit mode) opens a **profile-wide** list: **Add**
## Patterns
The **Patterns** dialog (Edit mode) is a **read-only reference**: pattern names and typical **delay** ranges from the pattern definitions. It does not change device behaviour by itself; patterns are chosen inside the preset editor.
The **Patterns** dialog (Edit mode) lists pattern names and typical **delay** ranges from the pattern definitions. Choosing a pattern still happens inside the preset editor.
**Wi-Fi drivers** can install new pattern modules over HTTP: the REST API exposes **`/patterns/ota/*`**, **`POST /patterns/<name>/send`**, **`POST /patterns/upload`**, and **`POST /patterns/driver`** (see [API.md](API.md)). ESP-NOW devices follow the bridge/serial path you configure for preset traffic.
---
@@ -98,7 +115,7 @@ The **Patterns** dialog (Edit mode) is a **read-only reference**: pattern names
## Mobile layout
On narrow screens, use **Menu** to reach the same actions as the desktop header (Profiles, Tabs, Presets, Help, mode toggle, etc.).
On narrow screens, use **Menu** to reach the same actions as the desktop header (Profiles, Zones, Presets, Outputs, Sequences, Help, mode toggle, brightness, etc.).
![Schematic: narrow layout with Menu and the same header actions in a dropdown.](images/help/mobile-menu.svg)
@@ -108,5 +125,5 @@ On narrow screens, use **Menu** to reach the same actions as the desktop header
## Further reading
- **[API.md](API.md)** — REST routes, session scoping, WebSocket `/ws`, and LED driver JSON (`presets`, `select`, `save`, `default`, pattern keys).
- **[API.md](API.md)** — REST routes, session scoping, WebSocket `/ws`, and LED driver JSON (`presets`, `select`, `save`, `default`, pattern keys, pattern **manifest**).
- **README** — `pipenv run run`, port 80 setup, and high-level behaviour.
BIN
View File
Binary file not shown.
-112
View File
@@ -1,112 +0,0 @@
# Benchmark: LRU eviction vs add-then-remove-after-use on ESP32.
# Run on device: mpremote run esp32/benchmark_peers.py
# (add/del_peer are timed; send() may fail if no peer is listening - timing still valid)
import espnow
import network
import time
BROADCAST = b"\xff\xff\xff\xff\xff\xff"
MAX_PEERS = 20
ITERATIONS = 50
PAYLOAD = b"x" * 32 # small payload
network.WLAN(network.STA_IF).active(True)
esp = espnow.ESPNow()
esp.active(True)
esp.add_peer(BROADCAST)
# Build 19 dummy MACs so we have 20 peers total (broadcast + 19).
def mac(i):
return bytes([0, 0, 0, 0, 0, i])
peers_list = [mac(i) for i in range(1, 20)]
for p in peers_list:
esp.add_peer(p)
# One "new" MAC we'll add/remove.
new_mac = bytes([0, 0, 0, 0, 0, 99])
def bench_lru():
"""LRU: ensure_peer (evict oldest + add new), send, update last_used."""
last_used = {BROADCAST: time.ticks_ms()}
for p in peers_list:
last_used[p] = time.ticks_ms()
# Pre-remove one so we have 19; ensure_peer(new) will add 20th.
esp.del_peer(peers_list[-1])
last_used.pop(peers_list[-1], None)
# Now 19 peers. Each iteration: ensure_peer(new) -> add_peer(new), send, update.
# Next iter: ensure_peer(new) -> already there, just send. So we need to force
# eviction each time: use a different "new" each time so we always evict+add.
t0 = time.ticks_us()
for i in range(ITERATIONS):
addr = bytes([0, 0, 0, 0, 0, 50 + (i % 30)]) # 30 different "new" MACs
peers = esp.get_peers()
peer_macs = [p[0] for p in peers]
if addr not in peer_macs:
if len(peer_macs) >= MAX_PEERS:
oldest_mac = None
oldest_ts = time.ticks_ms()
for m in peer_macs:
if m == BROADCAST:
continue
ts = last_used.get(m, 0)
if ts <= oldest_ts:
oldest_ts = ts
oldest_mac = m
if oldest_mac is not None:
esp.del_peer(oldest_mac)
last_used.pop(oldest_mac, None)
esp.add_peer(addr)
esp.send(addr, PAYLOAD)
last_used[addr] = time.ticks_ms()
t1 = time.ticks_us()
return time.ticks_diff(t1, t0)
def bench_add_then_remove():
"""Add peer, send, del_peer (remove after use). At 20 we must del one first."""
# Start full: 20 peers. To add new we del any one, add new, send, del new.
victim = peers_list[0]
t0 = time.ticks_us()
for i in range(ITERATIONS):
esp.del_peer(victim) # make room
esp.add_peer(new_mac)
esp.send(new_mac, PAYLOAD)
esp.del_peer(new_mac)
esp.add_peer(victim) # put victim back so we're at 20 again
t1 = time.ticks_us()
return time.ticks_diff(t1, t0)
def bench_send_existing():
"""Baseline: send to existing peer only (no add/del)."""
t0 = time.ticks_us()
for _ in range(ITERATIONS):
esp.send(peers_list[0], PAYLOAD)
t1 = time.ticks_us()
return time.ticks_diff(t1, t0)
print("ESP-NOW peer benchmark ({} iterations)".format(ITERATIONS))
print()
# Baseline: send to existing peer
try:
us = bench_send_existing()
print("Send to existing peer only: {:>8} us total {:>7.1f} us/iter".format(us, us / ITERATIONS))
except Exception as e:
print("Send existing failed:", e)
print()
# LRU: evict oldest then add new, send
try:
us = bench_lru()
print("LRU (evict oldest + add + send): {:>8} us total {:>7.1f} us/iter".format(us, us / ITERATIONS))
except Exception as e:
print("LRU failed:", e)
print()
# Add then remove after use
try:
us = bench_add_then_remove()
print("Add then remove after use: {:>8} us total {:>7.1f} us/iter".format(us, us / ITERATIONS))
except Exception as e:
print("Add-then-remove failed:", e)
print()
print("Done.")
-253
View File
@@ -1,253 +0,0 @@
# Serial-to-ESP-NOW bridge: JSON in both directions on UART + ESP-NOW.
#
# Pi → UART (two supported forms):
# A) Legacy: 6 bytes destination MAC + UTF-8 JSON payload (one write = one frame).
# B) Newline JSON: one object per line, UTF-8, ending with \n
# - Multicast via ESP32: {"m":"split","peers":["12hex",...],"body":{...}}
# - Unicast / broadcast: {"to":"12hex","v":"1",...} (all keys except to/dest go to peers)
#
# ESP-NOW → Pi: newline-delimited JSON, one object per packet:
# {"dir":"espnow_rx","from":"<12hex>","payload":{...}} if body was JSON
# {"dir":"espnow_rx","from":"<12hex>","payload_text":"..."} if UTF-8 not JSON
# {"dir":"espnow_rx","from":"<12hex>","payload_b64":"..."} if binary
from machine import Pin, UART
import espnow
import json
import network
import time
import ubinascii
UART_BAUD = 912000
BROADCAST = b"\xff\xff\xff\xff\xff\xff"
MAX_PEERS = 20
WIFI_CHANNEL = 6
sta = network.WLAN(network.STA_IF)
sta.active(True)
sta.config(pm=network.WLAN.PM_NONE, channel=WIFI_CHANNEL)
print("WiFi STA channel:", sta.config("channel"), "(WIFI_CHANNEL=%s)" % WIFI_CHANNEL)
esp = espnow.ESPNow()
esp.active(True)
esp.add_peer(BROADCAST)
uart = UART(1, UART_BAUD, tx=Pin(21), rx=Pin(6))
last_used = {BROADCAST: time.ticks_ms()}
uart_rx_buf = b""
ESP_ERR_ESPNOW_EXIST = -12395
def ensure_peer(addr):
peers = esp.get_peers()
peer_macs = [p[0] for p in peers]
if addr in peer_macs:
return
if len(peer_macs) >= MAX_PEERS:
oldest_mac = None
oldest_ts = time.ticks_ms()
for mac in peer_macs:
if mac == BROADCAST:
continue
ts = last_used.get(mac, 0)
if ts <= oldest_ts:
oldest_ts = ts
oldest_mac = mac
if oldest_mac is not None:
esp.del_peer(oldest_mac)
last_used.pop(oldest_mac, None)
try:
esp.add_peer(addr)
except OSError as e:
if e.args[0] != ESP_ERR_ESPNOW_EXIST:
raise
def try_apply_bridge_config(obj):
"""Pi sends {"m":"bridge","ch":1..11} — set STA channel only; do not ESP-NOW forward."""
if not isinstance(obj, dict) or obj.get("m") != "bridge":
return False
ch = obj.get("ch")
if ch is None:
ch = obj.get("wifi_channel")
if ch is None:
return True
try:
n = int(ch)
if 1 <= n <= 11:
sta.config(pm=network.WLAN.PM_NONE, channel=n)
print("Bridge STA channel ->", n)
except Exception as e:
print("bridge config:", e)
return True
def send_split_from_obj(obj):
"""obj has m=split, peers=[12hex,...], body=dict."""
body = obj.get("body")
if body is None:
return
try:
out = json.dumps(body).encode("utf-8")
except (TypeError, ValueError):
return
for peer in obj.get("peers") or []:
if not isinstance(peer, str) or len(peer) != 12:
continue
try:
mac = bytes.fromhex(peer)
except ValueError:
continue
if len(mac) != 6:
continue
ensure_peer(mac)
esp.send(mac, out)
last_used[mac] = time.ticks_ms()
def process_broadcast_payload_split_or_flood(payload):
try:
text = payload.decode("utf-8")
obj = json.loads(text)
except Exception:
obj = None
if isinstance(obj, dict) and try_apply_bridge_config(obj):
return
if (
isinstance(obj, dict)
and obj.get("m") == "split"
and isinstance(obj.get("peers"), list)
):
send_split_from_obj(obj)
return
ensure_peer(BROADCAST)
esp.send(BROADCAST, payload)
last_used[BROADCAST] = time.ticks_ms()
def process_legacy_uart_frame(data):
if not data or len(data) < 6:
return
addr = data[:6]
payload = data[6:]
if addr == BROADCAST:
process_broadcast_payload_split_or_flood(payload)
return
ensure_peer(addr)
esp.send(addr, payload)
last_used[addr] = time.ticks_ms()
def handle_json_command_line(obj):
if not isinstance(obj, dict):
return
if try_apply_bridge_config(obj):
return
if obj.get("m") == "split" and isinstance(obj.get("peers"), list):
send_split_from_obj(obj)
return
to = obj.get("to") or obj.get("dest")
if isinstance(to, str) and len(to) == 12:
try:
mac = bytes.fromhex(to)
except ValueError:
return
if len(mac) != 6:
return
body = {k: v for k, v in obj.items() if k not in ("to", "dest")}
if not body:
return
try:
out = json.dumps(body).encode("utf-8")
except (TypeError, ValueError):
return
ensure_peer(mac)
esp.send(mac, out)
last_used[mac] = time.ticks_ms()
def drain_uart_json_lines():
"""Parse leading newline-delimited JSON objects from uart_rx_buf; leave rest."""
global uart_rx_buf
while True:
s = uart_rx_buf.lstrip()
if not s:
uart_rx_buf = b""
return
if s[0] != ord("{"):
uart_rx_buf = s
return
nl = s.find(b"\n")
if nl < 0:
uart_rx_buf = s
return
line = s[:nl].strip()
uart_rx_buf = s[nl + 1 :]
if line:
try:
text = line.decode("utf-8")
obj = json.loads(text)
handle_json_command_line(obj)
except Exception as e:
print("UART JSON line error:", e)
# continue; there may be another JSON line in buffer
def drain_uart_legacy_frame():
"""If buffer does not start with '{', treat whole buffer as one 6-byte MAC + JSON frame."""
global uart_rx_buf
s = uart_rx_buf
if not s or s[0] == ord("{"):
return
if len(s) < 6:
return
data = s
uart_rx_buf = b""
process_legacy_uart_frame(data)
def forward_espnow_to_uart(mac, msg):
peer_hex = ubinascii.hexlify(mac).decode()
try:
text = msg.decode("utf-8")
try:
payload = json.loads(text)
line_obj = {"dir": "espnow_rx", "from": peer_hex, "payload": payload}
except ValueError:
line_obj = {"dir": "espnow_rx", "from": peer_hex, "payload_text": text}
except UnicodeDecodeError:
line_obj = {
"dir": "espnow_rx",
"from": peer_hex,
"payload_b64": ubinascii.b64encode(msg).decode(),
}
try:
line = json.dumps(line_obj) + "\n"
uart.write(line.encode("utf-8"))
except Exception as e:
print("UART TX error:", e)
print("Starting ESP32 bridge (UART JSON + legacy MAC+JSON, ESP-NOW RX → UART JSON lines)")
while True:
idle = True
if uart.any():
idle = False
uart_rx_buf += uart.read()
drain_uart_json_lines()
drain_uart_legacy_frame()
try:
peer, msg = esp.recv(0)
except OSError:
peer, msg = None, None
if peer is not None and msg is not None:
idle = False
if len(peer) == 6:
forward_espnow_to_uart(peer, msg)
if idle:
time.sleep_ms(1)
-21
View File
@@ -1,21 +0,0 @@
{
"ch": 6,
"peers": {
"12:3456789012":{
"select": [["name1", "preset1"]]
,
"ff:ff:ff:ff:ff:ff": {
"presets": {
"preset1": {
"pattern": "on",
"colors": ["#FF0000", "#00FF00", "#0000FF"],
"delay": 100,
"brightness": 127,
"auto": true
}
}
}
}
}
+7
View File
@@ -0,0 +1,7 @@
# espnow-sender
Minimal MicroPython project for receiving JSON over Microdot WebSocket.
- WebSocket endpoint: `/ws`
- Entry point: `main.py`
- Message template: `msg.json`
+120
View File
@@ -0,0 +1,120 @@
import asyncio
import json
from microdot import Microdot
from microdot.websocket import WebSocketError, with_websocket
import espnow
import network
from util import format_mac, parse_mac
app = Microdot()
_esp = None
_known_peers = set()
_ws_clients = set()
def _init_espnow():
global _esp
sta = network.WLAN(network.STA_IF)
sta.active(True)
_esp = espnow.ESPNow()
_esp.active(True)
def _validate_envelope(obj):
if obj.get("v") != "1":
raise ValueError("message.v must be '1'")
devices = obj["devices"]
for address in devices.keys():
parse_mac(address)
return obj
def _send_espnow(address, payload):
if _esp is None:
raise ValueError("espnow is not initialized")
mac = parse_mac(address)
msg = json.dumps(payload, separators=(",", ":")).encode("utf-8")
if mac not in _known_peers:
_esp.add_peer(mac)
_known_peers.add(mac)
_esp.send(mac, msg)
return mac, len(msg)
async def _broadcast_ws(obj):
text = json.dumps(obj)
dead = []
for client in list(_ws_clients):
try:
await client.send(text)
except Exception:
dead.append(client)
for client in dead:
_ws_clients.discard(client)
async def _espnow_receive_loop():
while True:
host, msg = _esp.recv(0)
if not host:
await asyncio.sleep(0.01)
continue
await _broadcast_ws(
{
"from": format_mac(host),
"payload": msg.decode("utf-8"),
}
)
@app.route("/ws")
@with_websocket
async def ws(request, ws):
_ws_clients.add(ws)
while True:
try:
raw = await ws.receive()
except WebSocketError:
break
if not raw:
break
try:
parsed = json.loads(raw)
env = _validate_envelope(parsed)
sent = []
for address, payload in env["devices"].items():
mac, payload_size = _send_espnow(address, payload)
sent.append(
{
"address": format_mac(mac),
"bytes": payload_size,
}
)
except (ValueError, TypeError) as e:
await ws.send(json.dumps({"ok": False, "error": str(e)}))
continue
await ws.send(
json.dumps(
{
"ok": True,
"sent": sent,
}
)
)
_ws_clients.discard(ws)
async def main(port=80):
_init_espnow()
asyncio.create_task(_espnow_receive_loop())
await app.start_server(host="0.0.0.0", port=port)
if __name__ == "__main__":
asyncio.run(main(port=80))
+24
View File
@@ -0,0 +1,24 @@
{
"v": "1",
"devices": {
"ff:ff:ff:ff:ff:ff": {
"presets": {
"preset_id": {
"pattern": "on",
"colors": ["#FF0000"],
"delay": 100,
"brightness": 255,
"auto": true
}
},
"select": {
"preset": "preset_id",
"step": 0
},
"save": true,
"default": "preset_id",
"b": 255
}
}
}
+12
View File
@@ -0,0 +1,12 @@
def parse_mac(value):
raw = value.strip().lower().replace(":", "").replace("-", "")
if len(raw) != 12:
raise ValueError("address must be 12 hex chars or aa:bb:cc:dd:ee:ff")
try:
return bytes.fromhex(raw)
except ValueError:
raise ValueError("address contains non-hex characters")
def format_mac(mac_bytes):
return ":".join("{:02x}".format(b) for b in mac_bytes)
Submodule
+1
Submodule led-simulator added at 7ce56b64df.
Submodule led-tool updated: 5f7acf38f0...892ccaec71.
+123
View File
@@ -0,0 +1,123 @@
// Parametric LED bar vertical stand socket
// For a bar nominally 14 x 17 mm, 2 m long.
// This part is intended to be screwed to an MDF base.
// -------------------------
// User parameters
// -------------------------
bar_w = 14; // Bar width (mm)
bar_d = 17; // Bar depth (mm)
clearance = 0.4; // Total clearance added to each axis (mm)
socket_height = 36; // Height of printed socket body (mm)
wall = 3.2; // Socket wall thickness (mm)
base_thickness = 5; // Printed bottom plate thickness (mm)
// USB cable/connector side opening
usb_notch_enable = true;
usb_notch_w = 11;
usb_notch_h = 9;
usb_notch_from_bottom = 6;
usb_notch_side = "right"; // "right" or "left"
// Mounting ears for MDF screws
ear_enable = true;
ear_len = 16;
ear_w = 16;
ear_thickness = base_thickness;
screw_hole_d = 4.2; // M4 clearance. Use 3.4 for M3.
screw_hole_edge = 5.5; // Hole center offset from ear outer corner
// Optional clamp lip at top to reduce wobble
top_lip_enable = true;
top_lip_depth = 2.0; // Intrudes into opening on each side
top_lip_height = 3.0;
$fn = 48;
// -------------------------
// Derived
// -------------------------
inner_w = bar_w + clearance;
inner_d = bar_d + clearance;
outer_w = inner_w + wall * 2;
outer_d = inner_d + wall * 2;
outer_h = socket_height;
module screw_hole() {
cylinder(h = ear_thickness + 0.2, d = screw_hole_d);
}
module mounting_ear(sign_y = 1) {
translate([outer_w / 2, sign_y * (outer_d / 2), 0])
cube([ear_len, ear_w, ear_thickness], center = false);
}
module top_lip() {
if (top_lip_enable) {
// Front and back lips at the top of the socket.
translate([wall, wall, outer_h - top_lip_height])
cube([top_lip_depth, inner_d, top_lip_height]);
translate([outer_w - wall - top_lip_depth, wall, outer_h - top_lip_height])
cube([top_lip_depth, inner_d, top_lip_height]);
}
}
difference() {
union() {
// Main body
cube([outer_w, outer_d, outer_h], center = false);
// Base plate under socket for stiffness
translate([0, 0, -base_thickness])
cube([outer_w, outer_d, base_thickness], center = false);
// Mounting ears
if (ear_enable) {
translate([0, 0, -ear_thickness]) {
mounting_ear(1);
mounting_ear(-1);
}
}
top_lip();
}
// Main bar cavity
translate([wall, wall, 0])
cube([inner_w, inner_d, outer_h + 0.2], center = false);
// USB side notch
if (usb_notch_enable) {
if (usb_notch_side == "right") {
translate([outer_w - wall - 0.1, (outer_d - usb_notch_w) / 2, usb_notch_from_bottom])
cube([wall + 0.3, usb_notch_w, usb_notch_h], center = false);
} else {
translate([-0.2, (outer_d - usb_notch_w) / 2, usb_notch_from_bottom])
cube([wall + 0.3, usb_notch_w, usb_notch_h], center = false);
}
}
// Screw holes in ears
if (ear_enable) {
// Upper ear hole
translate([
outer_w / 2 + ear_len - screw_hole_edge,
outer_d / 2 + ear_w - screw_hole_edge,
-ear_thickness - 0.05
]) screw_hole();
// Lower ear hole
translate([
outer_w / 2 + ear_len - screw_hole_edge,
-outer_d / 2 + screw_hole_edge,
-ear_thickness - 0.05
]) screw_hole();
}
}
// Print orientation helper:
// Keep the base/ears on the bed.
// If fit is tight, increase clearance to 0.5 or 0.6.
-2
View File
@@ -1,2 +0,0 @@
from microdot.microdot import Microdot, Request, Response, abort, redirect, \
send_file # noqa: F401
-8
View File
@@ -1,8 +0,0 @@
try:
from functools import wraps
except ImportError: # pragma: no cover
# MicroPython does not currently implement functools.wraps
def wraps(wrapped):
def _(wrapper):
return wrapper
return _
File diff suppressed because it is too large. Load diff
-225
View File
@@ -1,225 +0,0 @@
try:
import jwt
HAS_JWT = True
except ImportError:
HAS_JWT = False
try:
import ubinascii
except ImportError:
import binascii as ubinascii
try:
import uhashlib as hashlib
except ImportError:
import hashlib
try:
import uhmac as hmac
except ImportError:
try:
import hmac
except ImportError:
hmac = None
import json
from microdot.microdot import invoke_handler
from microdot.helpers import wraps
class SessionDict(dict):
"""A session dictionary.
The session dictionary is a standard Python dictionary that has been
extended with convenience ``save()`` and ``delete()`` methods.
"""
def __init__(self, request, session_dict):
super().__init__(session_dict)
self.request = request
def save(self):
"""Update the session cookie."""
self.request.app._session.update(self.request, self)
def delete(self):
"""Delete the session cookie."""
self.request.app._session.delete(self.request)
class Session:
"""Session handling
:param app: The application instance.
:param secret_key: The secret key, as a string or bytes object.
:param cookie_options: A dictionary with cookie options to pass as
arguments to :meth:`Response.set_cookie()
<microdot.Response.set_cookie>`.
"""
secret_key = None
def __init__(self, app=None, secret_key=None, cookie_options=None):
self.secret_key = secret_key
self.cookie_options = cookie_options or {}
if app is not None:
self.initialize(app)
def initialize(self, app, secret_key=None, cookie_options=None):
if secret_key is not None:
self.secret_key = secret_key
if cookie_options is not None:
self.cookie_options = cookie_options
if 'path' not in self.cookie_options:
self.cookie_options['path'] = '/'
if 'http_only' not in self.cookie_options:
self.cookie_options['http_only'] = True
app._session = self
def get(self, request):
"""Retrieve the user session.
:param request: The client request.
The return value is a session dictionary with the data stored in the
user's session, or ``{}`` if the session data is not available or
invalid.
"""
if not self.secret_key:
raise ValueError('The session secret key is not configured')
if hasattr(request.g, '_session'):
return request.g._session
session = request.cookies.get('session')
if session is None:
request.g._session = SessionDict(request, {})
return request.g._session
request.g._session = SessionDict(request, self.decode(session))
return request.g._session
def update(self, request, session):
"""Update the user session.
:param request: The client request.
:param session: A dictionary with the update session data for the user.
Applications would normally not call this method directly, instead they
would use the :meth:`SessionDict.save` method on the session
dictionary, which calls this method. For example::
@app.route('/')
@with_session
def index(request, session):
session['foo'] = 'bar'
session.save()
return 'Hello, World!'
Calling this method adds a cookie with the updated session to the
request currently being processed.
"""
if not self.secret_key:
raise ValueError('The session secret key is not configured')
encoded_session = self.encode(session)
@request.after_request
def _update_session(request, response):
response.set_cookie('session', encoded_session,
**self.cookie_options)
return response
def delete(self, request):
"""Remove the user session.
:param request: The client request.
Applications would normally not call this method directly, instead they
would use the :meth:`SessionDict.delete` method on the session
dictionary, which calls this method. For example::
@app.route('/')
@with_session
def index(request, session):
session.delete()
return 'Hello, World!'
Calling this method adds a cookie removal header to the request
currently being processed.
"""
@request.after_request
def _delete_session(request, response):
response.delete_cookie('session', **self.cookie_options)
return response
def encode(self, payload, secret_key=None):
"""Encode session data using JWT if available, otherwise use simple HMAC."""
if HAS_JWT:
return jwt.encode(payload, secret_key or self.secret_key,
algorithm='HS256')
else:
# Simple encoding for MicroPython: base64(json) + HMAC signature
key = (secret_key or self.secret_key).encode() if isinstance(secret_key or self.secret_key, str) else (secret_key or self.secret_key)
payload_json = json.dumps(payload)
payload_b64 = ubinascii.b2a_base64(payload_json.encode()).decode().strip()
# Create HMAC signature
if hmac:
# Use hmac module if available
h = hmac.new(key, payload_json.encode(), hashlib.sha256)
else:
# Fallback: simple SHA256(key + message)
h = hashlib.sha256(key + payload_json.encode())
signature = ubinascii.b2a_base64(h.digest()).decode().strip()
return f"{payload_b64}.{signature}"
def decode(self, session, secret_key=None):
"""Decode session data using JWT if available, otherwise use simple HMAC."""
if HAS_JWT:
try:
payload = jwt.decode(session, secret_key or self.secret_key,
algorithms=['HS256'])
except jwt.exceptions.PyJWTError: # pragma: no cover
return {}
return payload
else:
try:
# Simple decoding for MicroPython
if '.' not in session:
return {}
payload_b64, signature = session.rsplit('.', 1)
payload_json = ubinascii.a2b_base64(payload_b64).decode()
# Verify HMAC signature
key = (secret_key or self.secret_key).encode() if isinstance(secret_key or self.secret_key, str) else (secret_key or self.secret_key)
if hmac:
# Use hmac module if available
h = hmac.new(key, payload_json.encode(), hashlib.sha256)
else:
# Fallback: simple SHA256(key + message)
h = hashlib.sha256(key + payload_json.encode())
expected_signature = ubinascii.b2a_base64(h.digest()).decode().strip()
if signature != expected_signature:
return {}
return json.loads(payload_json)
except Exception:
return {}
def with_session(f):
"""Decorator that passes the user session to the route handler.
The session dictionary is passed to the decorated function as an argument
after the request object. Example::
@app.route('/')
@with_session
def index(request, session):
return 'Hello, World!'
Note that the decorator does not save the session. To update the session,
call the :func:`session.save() <microdot.session.SessionDict.save>` method.
"""
@wraps(f)
async def wrapper(request, *args, **kwargs):
return await invoke_handler(
f, request, request.app._session.get(request), *args, **kwargs)
return wrapper
-70
View File
@@ -1,70 +0,0 @@
from utemplate import recompile
_loader = None
class Template:
"""A template object.
:param template: The filename of the template to render, relative to the
configured template directory.
"""
@classmethod
def initialize(cls, template_dir='templates',
loader_class=recompile.Loader):
"""Initialize the templating subsystem.
:param template_dir: the directory where templates are stored. This
argument is optional. The default is to load
templates from a *templates* subdirectory.
:param loader_class: the ``utemplate.Loader`` class to use when loading
templates. This argument is optional. The default
is the ``recompile.Loader`` class, which
automatically recompiles templates when they
change.
"""
global _loader
_loader = loader_class(None, template_dir)
def __init__(self, template):
if _loader is None: # pragma: no cover
self.initialize()
#: The name of the template
self.name = template
self.template = _loader.load(template)
def generate(self, *args, **kwargs):
"""Return a generator that renders the template in chunks, with the
given arguments."""
return self.template(*args, **kwargs)
def render(self, *args, **kwargs):
"""Render the template with the given arguments and return it as a
string."""
return ''.join(self.generate(*args, **kwargs))
def generate_async(self, *args, **kwargs):
"""Return an asynchronous generator that renders the template in
chunks, using the given arguments."""
class sync_to_async_iter():
def __init__(self, iter):
self.iter = iter
def __aiter__(self):
return self
async def __anext__(self):
try:
return next(self.iter)
except StopIteration:
raise StopAsyncIteration
return sync_to_async_iter(self.generate(*args, **kwargs))
async def render_async(self, *args, **kwargs):
"""Render the template with the given arguments asynchronously and
return it as a string."""
response = ''
async for chunk in self.generate_async(*args, **kwargs):
response += chunk
return response
-231
View File
@@ -1,231 +0,0 @@
import binascii
import hashlib
from microdot import Request, Response
from microdot.microdot import MUTED_SOCKET_ERRORS, print_exception
from microdot.helpers import wraps
class WebSocketError(Exception):
"""Exception raised when an error occurs in a WebSocket connection."""
pass
class WebSocket:
"""A WebSocket connection object.
An instance of this class is sent to handler functions to manage the
WebSocket connection.
"""
CONT = 0
TEXT = 1
BINARY = 2
CLOSE = 8
PING = 9
PONG = 10
#: Specify the maximum message size that can be received when calling the
#: ``receive()`` method. Messages with payloads that are larger than this
#: size will be rejected and the connection closed. Set to 0 to disable
#: the size check (be aware of potential security issues if you do this),
#: or to -1 to use the value set in
#: ``Request.max_body_length``. The default is -1.
#:
#: Example::
#:
#: WebSocket.max_message_length = 4 * 1024 # up to 4KB messages
max_message_length = -1
def __init__(self, request):
self.request = request
self.closed = False
async def handshake(self):
response = self._handshake_response()
await self.request.sock[1].awrite(
b'HTTP/1.1 101 Switching Protocols\r\n')
await self.request.sock[1].awrite(b'Upgrade: websocket\r\n')
await self.request.sock[1].awrite(b'Connection: Upgrade\r\n')
await self.request.sock[1].awrite(
b'Sec-WebSocket-Accept: ' + response + b'\r\n\r\n')
async def receive(self):
"""Receive a message from the client."""
while True:
opcode, payload = await self._read_frame()
send_opcode, data = self._process_websocket_frame(opcode, payload)
if send_opcode: # pragma: no cover
await self.send(data, send_opcode)
elif data: # pragma: no branch
return data
async def send(self, data, opcode=None):
"""Send a message to the client.
:param data: the data to send, given as a string or bytes.
:param opcode: a custom frame opcode to use. If not given, the opcode
is ``TEXT`` or ``BINARY`` depending on the type of the
data.
"""
frame = self._encode_websocket_frame(
opcode or (self.TEXT if isinstance(data, str) else self.BINARY),
data)
await self.request.sock[1].awrite(frame)
async def close(self):
"""Close the websocket connection."""
if not self.closed: # pragma: no cover
self.closed = True
await self.send(b'', self.CLOSE)
def _handshake_response(self):
connection = False
upgrade = False
websocket_key = None
for header, value in self.request.headers.items():
h = header.lower()
if h == 'connection':
connection = True
if 'upgrade' not in value.lower():
return self.request.app.abort(400)
elif h == 'upgrade':
upgrade = True
if not value.lower() == 'websocket':
return self.request.app.abort(400)
elif h == 'sec-websocket-key':
websocket_key = value
if not connection or not upgrade or not websocket_key:
return self.request.app.abort(400)
d = hashlib.sha1(websocket_key.encode())
d.update(b'258EAFA5-E914-47DA-95CA-C5AB0DC85B11')
return binascii.b2a_base64(d.digest())[:-1]
@classmethod
def _parse_frame_header(cls, header):
fin = header[0] & 0x80
opcode = header[0] & 0x0f
if fin == 0 or opcode == cls.CONT: # pragma: no cover
raise WebSocketError('Continuation frames not supported')
has_mask = header[1] & 0x80
length = header[1] & 0x7f
if length == 126:
length = -2
elif length == 127:
length = -8
return fin, opcode, has_mask, length
def _process_websocket_frame(self, opcode, payload):
if opcode == self.TEXT:
payload = payload.decode()
elif opcode == self.BINARY:
pass
elif opcode == self.CLOSE:
raise WebSocketError('Websocket connection closed')
elif opcode == self.PING:
return self.PONG, payload
elif opcode == self.PONG: # pragma: no branch
return None, None
return None, payload
@classmethod
def _encode_websocket_frame(cls, opcode, payload):
frame = bytearray()
frame.append(0x80 | opcode)
if opcode == cls.TEXT:
payload = payload.encode()
if len(payload) < 126:
frame.append(len(payload))
elif len(payload) < (1 << 16):
frame.append(126)
frame.extend(len(payload).to_bytes(2, 'big'))
else:
frame.append(127)
frame.extend(len(payload).to_bytes(8, 'big'))
frame.extend(payload)
return frame
async def _read_frame(self):
header = await self.request.sock[0].read(2)
if len(header) != 2: # pragma: no cover
raise WebSocketError('Websocket connection closed')
fin, opcode, has_mask, length = self._parse_frame_header(header)
if length == -2:
length = await self.request.sock[0].read(2)
length = int.from_bytes(length, 'big')
elif length == -8:
length = await self.request.sock[0].read(8)
length = int.from_bytes(length, 'big')
max_allowed_length = Request.max_body_length \
if self.max_message_length == -1 else self.max_message_length
if length > max_allowed_length:
raise WebSocketError('Message too large')
if has_mask: # pragma: no cover
mask = await self.request.sock[0].read(4)
payload = await self.request.sock[0].read(length)
if has_mask: # pragma: no cover
payload = bytes(x ^ mask[i % 4] for i, x in enumerate(payload))
return opcode, payload
async def websocket_upgrade(request):
"""Upgrade a request handler to a websocket connection.
This function can be called directly inside a route function to process a
WebSocket upgrade handshake, for example after the user's credentials are
verified. The function returns the websocket object::
@app.route('/echo')
async def echo(request):
if not authenticate_user(request):
abort(401)
ws = await websocket_upgrade(request)
while True:
message = await ws.receive()
await ws.send(message)
"""
ws = WebSocket(request)
await ws.handshake()
@request.after_request
async def after_request(request, response):
return Response.already_handled
return ws
def websocket_wrapper(f, upgrade_function):
@wraps(f)
async def wrapper(request, *args, **kwargs):
ws = await upgrade_function(request)
try:
await f(request, ws, *args, **kwargs)
except OSError as exc:
if exc.errno not in MUTED_SOCKET_ERRORS: # pragma: no cover
raise
except WebSocketError:
pass
except Exception as exc:
print_exception(exc)
finally: # pragma: no cover
try:
await ws.close()
except Exception:
pass
return Response.already_handled
return wrapper
def with_websocket(f):
"""Decorator to make a route a WebSocket endpoint.
This decorator is used to define a route that accepts websocket
connections. The route then receives a websocket object as a second
argument that it can use to send and receive messages::
@app.route('/echo')
@with_websocket
async def echo(request, ws):
while True:
message = await ws.receive()
await ws.send(message)
"""
return websocket_wrapper(f, websocket_upgrade)
View File
Whitespace-only changes.
-14
View File
@@ -1,14 +0,0 @@
class Loader:
def __init__(self, pkg, dir):
if dir == ".":
dir = ""
else:
dir = dir.replace("/", ".") + "."
if pkg and pkg != "__main__":
dir = pkg + "." + dir
self.p = dir
def load(self, name):
name = name.replace(".", "_")
return __import__(self.p + name, None, None, (name,)).render
-21
View File
@@ -1,21 +0,0 @@
# (c) 2014-2020 Paul Sokolovsky. MIT license.
try:
from uos import stat, remove
except:
from os import stat, remove
from . import source
class Loader(source.Loader):
def load(self, name):
o_path = self.pkg_path + self.compiled_path(name)
i_path = self.pkg_path + self.dir + "/" + name
try:
o_stat = stat(o_path)
i_stat = stat(i_path)
if i_stat[8] > o_stat[8]:
# input file is newer, remove output to force recompile
remove(o_path)
finally:
return super().load(name)
-188
View File
@@ -1,188 +0,0 @@
# (c) 2014-2019 Paul Sokolovsky. MIT license.
from . import compiled
class Compiler:
START_CHAR = "{"
STMNT = "%"
STMNT_END = "%}"
EXPR = "{"
EXPR_END = "}}"
def __init__(self, file_in, file_out, indent=0, seq=0, loader=None):
self.file_in = file_in
self.file_out = file_out
self.loader = loader
self.seq = seq
self._indent = indent
self.stack = []
self.in_literal = False
self.flushed_header = False
self.args = "*a, **d"
def indent(self, adjust=0):
if not self.flushed_header:
self.flushed_header = True
self.indent()
self.file_out.write("def render%s(%s):\n" % (str(self.seq) if self.seq else "", self.args))
self.stack.append("def")
self.file_out.write(" " * (len(self.stack) + self._indent + adjust))
def literal(self, s):
if not s:
return
if not self.in_literal:
self.indent()
self.file_out.write('yield """')
self.in_literal = True
self.file_out.write(s.replace('"', '\\"'))
def close_literal(self):
if self.in_literal:
self.file_out.write('"""\n')
self.in_literal = False
def render_expr(self, e):
self.indent()
self.file_out.write('yield str(' + e + ')\n')
def parse_statement(self, stmt):
tokens = stmt.split(None, 1)
if tokens[0] == "args":
if len(tokens) > 1:
self.args = tokens[1]
else:
self.args = ""
elif tokens[0] == "set":
self.indent()
self.file_out.write(stmt[3:].strip() + "\n")
elif tokens[0] == "include":
if not self.flushed_header:
# If there was no other output, we still need a header now
self.indent()
tokens = tokens[1].split(None, 1)
args = ""
if len(tokens) > 1:
args = tokens[1]
if tokens[0][0] == "{":
self.indent()
# "1" as fromlist param is uPy hack
self.file_out.write('_ = __import__(%s.replace(".", "_"), None, None, 1)\n' % tokens[0][2:-2])
self.indent()
self.file_out.write("yield from _.render(%s)\n" % args)
return
with self.loader.input_open(tokens[0][1:-1]) as inc:
self.seq += 1
c = Compiler(inc, self.file_out, len(self.stack) + self._indent, self.seq)
inc_id = self.seq
self.seq = c.compile()
self.indent()
self.file_out.write("yield from render%d(%s)\n" % (inc_id, args))
elif len(tokens) > 1:
if tokens[0] == "elif":
assert self.stack[-1] == "if"
self.indent(-1)
self.file_out.write(stmt + ":\n")
else:
self.indent()
self.file_out.write(stmt + ":\n")
self.stack.append(tokens[0])
else:
if stmt.startswith("end"):
assert self.stack[-1] == stmt[3:]
self.stack.pop(-1)
elif stmt == "else":
assert self.stack[-1] == "if"
self.indent(-1)
self.file_out.write("else:\n")
else:
assert False
def parse_line(self, l):
while l:
start = l.find(self.START_CHAR)
if start == -1:
self.literal(l)
return
self.literal(l[:start])
self.close_literal()
sel = l[start + 1]
#print("*%s=%s=" % (sel, EXPR))
if sel == self.STMNT:
end = l.find(self.STMNT_END)
assert end > 0
stmt = l[start + len(self.START_CHAR + self.STMNT):end].strip()
self.parse_statement(stmt)
end += len(self.STMNT_END)
l = l[end:]
if not self.in_literal and l == "\n":
break
elif sel == self.EXPR:
# print("EXPR")
end = l.find(self.EXPR_END)
assert end > 0
expr = l[start + len(self.START_CHAR + self.EXPR):end].strip()
self.render_expr(expr)
end += len(self.EXPR_END)
l = l[end:]
else:
self.literal(l[start])
l = l[start + 1:]
def header(self):
self.file_out.write("# Autogenerated file\n")
def compile(self):
self.header()
for l in self.file_in:
self.parse_line(l)
self.close_literal()
return self.seq
class Loader(compiled.Loader):
def __init__(self, pkg, dir):
super().__init__(pkg, dir)
self.dir = dir
if pkg == "__main__":
# if pkg isn't really a package, don't bother to use it
# it means we're running from "filesystem directory", not
# from a package.
pkg = None
self.pkg_path = ""
if pkg:
p = __import__(pkg)
if isinstance(p.__path__, str):
# uPy
self.pkg_path = p.__path__
else:
# CPy
self.pkg_path = p.__path__[0]
self.pkg_path += "/"
def input_open(self, template):
path = self.pkg_path + self.dir + "/" + template
return open(path)
def compiled_path(self, template):
return self.dir + "/" + template.replace(".", "_") + ".py"
def load(self, name):
try:
return super().load(name)
except (OSError, ImportError):
pass
compiled_path = self.pkg_path + self.compiled_path(name)
f_in = self.input_open(name)
f_out = open(compiled_path, "w")
c = Compiler(f_in, f_out, loader=self)
c.compile()
f_in.close()
f_out.close()
return super().load(name)
-6
View File
@@ -1,6 +0,0 @@
from .blink import Blink
from .rainbow import Rainbow
from .pulse import Pulse
from .transition import Transition
from .chase import Chase
from .circle import Circle
-33
View File
@@ -1,33 +0,0 @@
import utime
class Blink:
def __init__(self, driver):
self.driver = driver
def run(self, preset):
"""Blink pattern: toggles LEDs on/off using preset delay, cycling through colors."""
# Use provided colors, or default to white if none
colors = preset.c if preset.c else [(255, 255, 255)]
color_index = 0
state = True # True = on, False = off
last_update = utime.ticks_ms()
while True:
current_time = utime.ticks_ms()
# Re-read delay each loop so live updates to preset.d take effect
delay_ms = max(1, int(preset.d))
if utime.ticks_diff(current_time, last_update) >= delay_ms:
if state:
base_color = colors[color_index % len(colors)]
color = self.driver.apply_brightness(base_color, preset.b)
self.driver.fill(color)
# Advance to next color for the next "on" phase
color_index += 1
else:
# "Off" phase: turn all LEDs off
self.driver.fill((0, 0, 0))
state = not state
last_update = current_time
# Yield once per tick so other logic can run
yield
-124
View File
@@ -1,124 +0,0 @@
import utime
class Chase:
def __init__(self, driver):
self.driver = driver
def run(self, preset):
"""Chase pattern: n1 LEDs of color0, n2 LEDs of color1, repeating.
Moves by n3 on even steps, n4 on odd steps (n3/n4 can be positive or negative)"""
colors = preset.c
if len(colors) < 1:
# Need at least 1 color
return
# Access colors, delay, and n values from preset
if not colors:
return
# If only one color provided, use it for both colors
if len(colors) < 2:
color0 = colors[0]
color1 = colors[0]
else:
color0 = colors[0]
color1 = colors[1]
color0 = self.driver.apply_brightness(color0, preset.b)
color1 = self.driver.apply_brightness(color1, preset.b)
n1 = max(1, int(preset.n1)) # LEDs of color 0
n2 = max(1, int(preset.n2)) # LEDs of color 1
n3 = int(preset.n3) # Step movement on even steps (can be negative)
n4 = int(preset.n4) # Step movement on odd steps (can be negative)
segment_length = n1 + n2
# Calculate position from step_count
step_count = self.driver.step
# Position alternates: step 0 adds n3, step 1 adds n4, step 2 adds n3, etc.
if step_count % 2 == 0:
# Even steps: (step_count//2) pairs of (n3+n4) plus one extra n3
position = (step_count // 2) * (n3 + n4) + n3
else:
# Odd steps: ((step_count+1)//2) pairs of (n3+n4)
position = ((step_count + 1) // 2) * (n3 + n4)
# Wrap position to keep it reasonable
max_pos = self.driver.num_leds + segment_length
position = position % max_pos
if position < 0:
position += max_pos
# If auto is False, run a single step and then stop
if not preset.a:
# Clear all LEDs
self.driver.n.fill((0, 0, 0))
# Draw repeating pattern starting at position
for i in range(self.driver.num_leds):
# Calculate position in the repeating segment
relative_pos = (i - position) % segment_length
if relative_pos < 0:
relative_pos = (relative_pos + segment_length) % segment_length
# Determine which color based on position in segment
if relative_pos < n1:
self.driver.n[i] = color0
else:
self.driver.n[i] = color1
self.driver.n.write()
# Increment step for next beat
self.driver.step = step_count + 1
# Allow tick() to advance the generator once
yield
return
# Auto mode: continuous loop
# Use transition_duration for timing and force the first update to happen immediately
transition_duration = max(10, int(preset.d))
last_update = utime.ticks_ms() - transition_duration
while True:
current_time = utime.ticks_ms()
if utime.ticks_diff(current_time, last_update) >= transition_duration:
# Calculate current position from step_count
if step_count % 2 == 0:
position = (step_count // 2) * (n3 + n4) + n3
else:
position = ((step_count + 1) // 2) * (n3 + n4)
# Wrap position
max_pos = self.driver.num_leds + segment_length
position = position % max_pos
if position < 0:
position += max_pos
# Clear all LEDs
self.driver.n.fill((0, 0, 0))
# Draw repeating pattern starting at position
for i in range(self.driver.num_leds):
# Calculate position in the repeating segment
relative_pos = (i - position) % segment_length
if relative_pos < 0:
relative_pos = (relative_pos + segment_length) % segment_length
# Determine which color based on position in segment
if relative_pos < n1:
self.driver.n[i] = color0
else:
self.driver.n[i] = color1
self.driver.n.write()
# Increment step
step_count += 1
self.driver.step = step_count
last_update = current_time
# Yield once per tick so other logic can run
yield
-96
View File
@@ -1,96 +0,0 @@
import utime
class Circle:
def __init__(self, driver):
self.driver = driver
def run(self, preset):
"""Circle loading pattern - grows to n2, then tail moves forward at n3 until min length n4"""
head = 0
tail = 0
# Calculate timing from preset
head_rate = max(1, int(preset.n1)) # n1 = head moves per second
tail_rate = max(1, int(preset.n3)) # n3 = tail moves per second
max_length = max(1, int(preset.n2)) # n2 = max length
min_length = max(0, int(preset.n4)) # n4 = min length
head_delay = 1000 // head_rate # ms between head movements
tail_delay = 1000 // tail_rate # ms between tail movements
last_head_move = utime.ticks_ms()
last_tail_move = utime.ticks_ms()
phase = "growing" # "growing", "shrinking", or "off"
# Support up to two colors (like chase). If only one color is provided,
# use black for the second; if none, default to white.
colors = preset.c
if not colors:
base0 = base1 = (255, 255, 255)
elif len(colors) == 1:
base0 = colors[0]
base1 = (0, 0, 0)
else:
base0 = colors[0]
base1 = colors[1]
color0 = self.driver.apply_brightness(base0, preset.b)
color1 = self.driver.apply_brightness(base1, preset.b)
while True:
current_time = utime.ticks_ms()
# Background: use second color during the "off" phase, otherwise clear to black
if phase == "off":
self.driver.n.fill(color1)
else:
self.driver.n.fill((0, 0, 0))
# Calculate segment length
segment_length = (head - tail) % self.driver.num_leds
if segment_length == 0 and head != tail:
segment_length = self.driver.num_leds
# Draw segment from tail to head as a solid color (no per-LED alternation)
current_color = color0
for i in range(segment_length + 1):
led_pos = (tail + i) % self.driver.num_leds
self.driver.n[led_pos] = current_color
# Move head continuously at n1 LEDs per second
if utime.ticks_diff(current_time, last_head_move) >= head_delay:
head = (head + 1) % self.driver.num_leds
last_head_move = current_time
# Tail behavior based on phase
if phase == "growing":
# Growing phase: tail stays at 0 until max length reached
if segment_length >= max_length:
phase = "shrinking"
elif phase == "shrinking":
# Shrinking phase: move tail forward at n3 LEDs per second
if utime.ticks_diff(current_time, last_tail_move) >= tail_delay:
tail = (tail + 1) % self.driver.num_leds
last_tail_move = current_time
# Check if we've reached min length
current_length = (head - tail) % self.driver.num_leds
if current_length == 0 and head != tail:
current_length = self.driver.num_leds
# For min_length = 0, we need at least 1 LED (the head)
if min_length == 0 and current_length <= 1:
phase = "off" # All LEDs off for 1 step
elif min_length > 0 and current_length <= min_length:
phase = "growing" # Cycle repeats
else: # phase == "off"
# Off phase: second color fills the ring for 1 step, then restart
tail = head # Reset tail to head position to start fresh
phase = "growing"
self.driver.n.write()
# Yield once per tick so other logic can run
yield
-64
View File
@@ -1,64 +0,0 @@
import utime
class Pulse:
def __init__(self, driver):
self.driver = driver
def run(self, preset):
self.driver.off()
# Get colors from preset
colors = preset.c
if not colors:
colors = [(255, 255, 255)]
color_index = 0
cycle_start = utime.ticks_ms()
# State machine based pulse using a single generator loop
while True:
# Read current timing parameters from preset
attack_ms = max(0, int(preset.n1)) # Attack time in ms
hold_ms = max(0, int(preset.n2)) # Hold time in ms
decay_ms = max(0, int(preset.n3)) # Decay time in ms
delay_ms = max(0, int(preset.d))
total_ms = attack_ms + hold_ms + decay_ms + delay_ms
if total_ms <= 0:
total_ms = 1
now = utime.ticks_ms()
elapsed = utime.ticks_diff(now, cycle_start)
base_color = colors[color_index % len(colors)]
if elapsed < attack_ms and attack_ms > 0:
# Attack: fade 0 -> 1
factor = elapsed / attack_ms
color = tuple(int(c * factor) for c in base_color)
self.driver.fill(self.driver.apply_brightness(color, preset.b))
elif elapsed < attack_ms + hold_ms:
# Hold: full brightness
self.driver.fill(self.driver.apply_brightness(base_color, preset.b))
elif elapsed < attack_ms + hold_ms + decay_ms and decay_ms > 0:
# Decay: fade 1 -> 0
dec_elapsed = elapsed - attack_ms - hold_ms
factor = max(0.0, 1.0 - (dec_elapsed / decay_ms))
color = tuple(int(c * factor) for c in base_color)
self.driver.fill(self.driver.apply_brightness(color, preset.b))
elif elapsed < total_ms:
# Delay phase: LEDs off between pulses
self.driver.fill((0, 0, 0))
else:
# End of cycle, move to next color and restart timing
color_index += 1
cycle_start = now
if not preset.a:
break
# Skip drawing this tick, start next cycle
yield
continue
# Yield once per tick
yield
-51
View File
@@ -1,51 +0,0 @@
import utime
class Rainbow:
def __init__(self, driver):
self.driver = driver
def _wheel(self, pos):
if pos < 85:
return (pos * 3, 255 - pos * 3, 0)
elif pos < 170:
pos -= 85
return (255 - pos * 3, 0, pos * 3)
else:
pos -= 170
return (0, pos * 3, 255 - pos * 3)
def run(self, preset):
step = self.driver.step % 256
step_amount = max(1, int(preset.n1)) # n1 controls step increment
# If auto is False, run a single step and then stop
if not preset.a:
for i in range(self.driver.num_leds):
rc_index = (i * 256 // self.driver.num_leds) + step
self.driver.n[i] = self.driver.apply_brightness(self._wheel(rc_index & 255), preset.b)
self.driver.n.write()
# Increment step by n1 for next manual call
self.driver.step = (step + step_amount) % 256
# Allow tick() to advance the generator once
yield
return
last_update = utime.ticks_ms()
while True:
current_time = utime.ticks_ms()
sleep_ms = max(1, int(preset.d)) # Get delay from preset
if utime.ticks_diff(current_time, last_update) >= sleep_ms:
for i in range(self.driver.num_leds):
rc_index = (i * 256 // self.driver.num_leds) + step
self.driver.n[i] = self.driver.apply_brightness(
self._wheel(rc_index & 255),
preset.b,
)
self.driver.n.write()
step = (step + step_amount) % 256
self.driver.step = step
last_update = current_time
# Yield once per tick so other logic can run
yield
-57
View File
@@ -1,57 +0,0 @@
import utime
class Transition:
def __init__(self, driver):
self.driver = driver
def run(self, preset):
"""Transition between colors, blending over `delay` ms."""
colors = preset.c
if not colors:
self.driver.off()
yield
return
# Only one color: just keep it on
if len(colors) == 1:
while True:
self.driver.fill(self.driver.apply_brightness(colors[0], preset.b))
yield
return
color_index = 0
start_time = utime.ticks_ms()
while True:
if not colors:
break
# Get current and next color based on live list
c1 = colors[color_index % len(colors)]
c2 = colors[(color_index + 1) % len(colors)]
duration = max(10, int(preset.d)) # At least 10ms
now = utime.ticks_ms()
elapsed = utime.ticks_diff(now, start_time)
if elapsed >= duration:
# End of this transition step
if not preset.a:
# One-shot: transition from first to second color only
self.driver.fill(self.driver.apply_brightness(c2, preset.b))
break
# Auto: move to next pair
color_index = (color_index + 1) % len(colors)
start_time = now
yield
continue
# Interpolate between c1 and c2
factor = elapsed / duration
interpolated = tuple(
int(c1[i] + (c2[i] - c1[i]) * factor) for i in range(3)
)
self.driver.fill(self.driver.apply_brightness(interpolated, preset.b))
yield
-4
View File
@@ -1,4 +0,0 @@
[pytest]
testpaths = tests
python_files = test_endpoints_pytest.py
-4
View File
@@ -1,4 +0,0 @@
#!/usr/bin/env bash
# Copy esp32/main.py to the connected ESP32 as /main.py (single line, no wrap).
cd "$(dirname "$0")/.."
pipenv run mpremote fs cp esp32/main.py :/main.py
-20
View File
@@ -1,20 +0,0 @@
#!/usr/bin/env bash
# Install systemd service so LED controller starts at boot.
# Run once: sudo scripts/install-boot-service.sh
set -e
cd "$(dirname "$0")/.."
REPO="$(pwd)"
SERVICE_NAME="led-controller.service"
UNIT_PATH="/etc/systemd/system/$SERVICE_NAME"
if [ ! -f "scripts/led-controller.service" ]; then
echo "Run this script from the repo root."
exit 1
fi
chmod +x scripts/start.sh
sudo cp "scripts/led-controller.service" "$UNIT_PATH"
sudo systemctl daemon-reload
sudo systemctl enable "$SERVICE_NAME"
echo "Installed and enabled $SERVICE_NAME"
echo "Start now: sudo systemctl start $SERVICE_NAME"
echo "Status: sudo systemctl status $SERVICE_NAME"
echo "Logs: journalctl -u $SERVICE_NAME -f"
Loaded 100 of 268 files, more files were not shown because too many files have changed in this diff. Show more