Commit Graph
22 Commits
Author SHA1 Message Date
jimmyandClaude Sonnet 5.5 2543673bd8 feat: sequences v2, bridges, and sim-controller
Rework sequences (engine, seqplay, envelope, API, web UI), add bridge
support, add the host sim-controller and rig simulation tests, and
update docs, presets and project tooling config.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-11-10 17:47:27 +13:00
jimmyandClaude Opus 5.5 d664026ee5 feat: sequences can step on time; searchable group pickers
- Sequences: advance_mode "time" makes each step last its `seconds`
  (0.1–3600) instead of beats; editor gets a "Steps last" selector.
- UI: search box in the groups modal; searchable add pickers for zone
  groups and presets.
- Preset "try" sends only to the current zone's groups, never broadcast.
- led-driver: max_brightness ceiling from device config; follow a
  controller that restarted its beat counter.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 12:05:31 +13:00
jimmyandClaude Sonnet 5.5 38162d4b89 feat: faster, correct preset editor; default presets use their own pattern
- Editing a preset can change its pattern (the dropdown was disabled).
- on, off and rainbow are built-in patterns and are always listed, so the
  editor no longer falls back to the first pattern (aurora) for them.
- The editor loads the pattern names once and only the selected pattern's
  definition (new GET /patterns/names and GET /patterns/<name>).
- A shared GET cache (fetch_cache.js) reuses profile, palette, zone, preset,
  group and pattern lookups; any write clears it and entries expire at 30 s.
- The seeded rainbow preset uses the rainbow pattern.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-11-10 01:46:11 +13:00
jimmyandClaude Sonnet 5.5 f85021d40d feat: Wi-Fi access point with a setting, password and boot button
The controller runs an AP (SSID = hostname, 192.168.5.1) next to ESP-NOW,
on by default. Network settings gain an on/off switch (ap_enabled) and an
optional WPA2 password (ap_password, 8-63 chars; empty is open). A button
on D7 (GPIO44) held at boot forces the AP on.

Wi-Fi now starts before Ethernet, and a missing W5500 no longer aborts the
boot: the web server and mDNS start anyway so the AP stays usable.

Network tuning found while testing over the AP: HTTP backlog 10 and 12 open
sockets (the default 5 dropped the 6th SYN, a 1 s stall on every page load),
larger TCP and Wi-Fi buffers, and IPv6 link-local addresses so mDNS answers
AAAA queries (browsers waited about a second for them).

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-11-10 01:46:05 +13:00
jimmyandClaude Opus 5.5 06953028ab feat(ui): driver settings and code updates over ESP-NOW
Settings gets a Driver tab (/settings/editor). It sends a driver its settings through PUT /devices/<id>, which now forwards name too, and runs the tools/driver_ota.py session from the browser. The firmware embeds the led-driver files and a manifest of their hashes, because crypto.subtle is unavailable over plain HTTP.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 23:51:41 +13:00
jimmyandClaude Opus 5.5 2f0c26e9b8 feat: default IP, reset reason in /status, seeded default group
With no DHCP answer in 15 seconds the controller takes 192.168.4.1/24, for a cable straight to a PC with a static IP. /status reports why the board last restarted. First boot also seeds a default group that the default zone plays to.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 22:25:22 +13:00
jimmyandClaude Opus 5.5 190c8bc982 feat: seed a default profile at first boot
A store with no profile gets a default one, using the seed POST /profiles already
creates plus a starter palette. db/ now holds those records instead of stored
data, and the unused db/presets/*.bin files are gone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 20:47:00 +13:00
jimmyandClaude Opus 5.5 b2cd242390 docs: describe the v2 controller's API, UI and tests
API.md now documents what the firmware serves: groups, combined
brightness, beat-driven sequences, import/export, /api/audio, patterns
over ESP-NOW, outputs, /ws, driver OTA, and how API calls become driver
messages and group commands. The user guide follows the current UI; the
in-app audio help describes the microphone instead of input devices.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:42:03 +13:00
jimmyandClaude Opus 5.5 32c0ecfa76 feat: update led-driver app files over ESP-NOW
tools/driver_ota.py (make ota-drivers) pushes the driver's .py files
through the controller, one file per POST /drivers/ota/file. Drivers
skip files they already have, and the rest are committed together.

- one target: acked unicast, two chunks in flight
- several targets: each file is broadcast once, then each driver is
  asked for its missing chunks and repaired by unicast
- rel: rel_send_seq, rel_wait and rel_send_wait, plus a callback for
  the drivers' 0x26 status replies
- commands are retried, because status replies are not acked
- broadcast chunks are paced 50 ms apart: faster broadcast left C3
  drivers unable to receive until reset
- bench results in docs/BENCH_TEST.md, endpoints in docs/API.md

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 23:45:38 +13:00
jimmyandClaude Sonnet 5.5 71bd320661 feat(v2): move web UI into v2, remove legacy MicroPython app
Move the web assets and templates under v2/web, drop the old src/, lib/
and scripts, and update firmware, tools, docs and db files. Add the audio
page, LED test scripts and VPN autoconnect script.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-11-02 20:30:02 +13:00
jimmyandClaude Opus 5.5 a5a7fc575f feat(engine): Pi-side animation engine with protocol outputs and sequencer
Add src/engine, modelled on technicalkiwi/portal's player and sequence runner:

- Pixel generator: runs the unchanged led-driver patterns under CPython
  (utime shim + NeoPixel-like buffer) on a per-zone render thread and
  streams frames to pixel outputs, with keepalive for static frames.
- Output drivers: DDP, Art-Net (ArtDMX/ArtSync), sACN/E1.31, USB-DMX
  (Enttec Pro / Open DMX), plus an ESP32 preset output that reuses the
  existing preset + select delivery path. Registry in db/output.json,
  CRUD and test pattern at /outputs.
- Sequencer: timed preset chains per zone (portal step shape), deadline
  scheduling, loop/repeat, resume after restart; legacy sequence records
  are migrated. Zone play/stop, sequence and scene play/stop endpoints.
- CLI (python -m engine.cli), Outputs and Sequences modals, preset tiles
  drive pixel outputs, API/README docs, engine test suite.

ESP32 firmware is unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-22 13:24:14 +13:00
piandCursor 827eb97203 feat(settings): server global brightness and Wi-Fi driver resync
- Serve GET /settings as JSON by removing duplicate HTML route (use /settings/page for the standalone UI).

- Save global_brightness via PUT; broadcast to connected drivers; push saved level when outbound WS connects.

- Zones UI loads brightness from GET /settings only (no localStorage).

- Bump led-driver submodule for settings.save on brightness with save flag.

- Extend API doc and endpoint tests for global_brightness.

Co-authored-by: Cursor <cursoragent@cursor.com>
2026-05-03 22:15:30 +12:00
jimmy 96712dda88 feat(controller): migrate wifi drivers from tcp to websocket clients 2026-04-14 23:13:26 +12:00
pi 28b19b5219 docs: zones, transports, pattern ota, and submodule readmes
Made-with: Cursor
2026-04-12 00:13:54 +12:00
pi fd618d7714 feat(zones): rename tabs to zones across api, ui, and storage
Made-with: Cursor
2026-04-06 18:22:03 +12:00
pi f8eba0ee7e feat(api): tcp driver registry, identify, preset push delivery
- Track Wi-Fi TCP clients, liveness pings, disconnect broadcast, bind errors via gather\n- Device list/get include connected; POST identify with __identify preset\n- Presets push/send delivery helpers; bump led-driver hello type

Made-with: Cursor
2026-04-06 00:21:57 +12:00
pi e6b5bf2cf1 feat(devices): wifi tcp registry, device API/UI, tests; bump led-tool
Made-with: Cursor
2026-04-05 21:13:07 +12:00
jimmy b7c45fd72c docs(ui): switch user-facing spelling to colour
Made-with: Cursor
2026-03-22 00:00:12 +13:00
jimmy ef968ebe39 docs: run/edit mode, profiles behavior, send presets
Made-with: Cursor
2026-03-21 23:51:00 +13:00
jimmy edadb40cb6 docs: rewrite API reference for current HTTP and driver flows
Made-with: Cursor
2026-03-21 23:15:44 +13:00
jimmy 7e33f7db6a Add additional configuration and utility files
- Add install script and message configuration
- Add settings controller and templates
- Add ESP-NOW message utility
- Update API documentation
2026-01-27 13:05:09 +13:00
jimmy 9e2409430c Add documentation and utility modules
- Add API specification documentation
- Add system specification document
- Add UI mockups and documentation
- Add utility modules (wifi)
2026-01-11 21:34:18 +13:00