Settings gets a Driver tab (/settings/editor). It sends a driver its settings through PUT /devices/<id>, which now forwards name too, and runs the tools/driver_ota.py session from the browser. The firmware embeds the led-driver files and a manifest of their hashes, because crypto.subtle is unavailable over plain HTTP.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With no DHCP answer in 15 seconds the controller takes 192.168.4.1/24, for a cable straight to a PC with a static IP. /status reports why the board last restarted. First boot also seeds a default group that the default zone plays to.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
store_save removes the old file before renaming the finished .tmp, so a restart between the two started that collection empty.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The seed runs from the got-IP handler on sys_evt, whose 2304-byte stack overflowed on the flash writes. A store with no profile then crashed mid-save on every boot.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A store with no profile gets a default one, using the seed POST /profiles already
creates plus a starter palette. db/ now holds those records instead of stored
data, and the unused db/presets/*.bin files are gone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A web-only change relinked without recompiling esp_app_desc.c, so the image kept
its old build time. make ota now uses led-controller.local unless HOST is given.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Sequences, Settings and Audio only show in Edit mode. On wide screens the Edit
mode actions and Run mode move into the Menu.
Edit device gets a Groups checklist. The Devices list and Edit device group
show names without addresses, and every device in Edit device group, in the
group or in the list to add from, gets an Identify button.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Six test files each defined the same profile() fixture. It now lives once
in conftest.py, with test_profiles.py's 201 check on create.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The header is one row again: zone tabs on the left, then the BPM readout,
and on wide screens the Beat/Downbeat switch, brightness and the buttons.
Under 1000 px the buttons fold into the Menu, which opens with the mode
toggle and brightness, as in v1. Groups and the Beat/Downbeat switch from
main are kept; the Zones dropdown main used on narrow screens is gone,
since the zone tabs stay visible.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Zone tabs, the BPM readout and the Menu share one line at every width.
The header buttons and the Beat/Downbeat switch move into the Menu (the
narrow-screen layout, now everywhere), and the brightness slider sits at
the bottom of the Menu, under its items.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
API.md now documents what the firmware serves: groups, combined
brightness, beat-driven sequences, import/export, /api/audio, patterns
over ESP-NOW, outputs, /ws, driver OTA, and how API calls become driver
messages and group commands. The user guide follows the current UI; the
in-app audio help describes the microphone instead of input devices.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Profiles, presets and sequences export and import as main's bundles.
Zones carry group_ids, preset_group_ids, sequence_ids, content_kind and
brightness; profiles seed rainbow as colour_cycle, and deleting a
profile also deletes its sequences. Groups, zones and sequences written
by older versions are migrated at boot.
/api/audio (status, event stream, start/stop, reset, anchor-bar,
devices) maps main's audio detector onto the mic's beat detector. Audio
start/stop picks whether mic beats or the BPM clock time sequences; the
clock's beats also go to the drivers while the mic is off.
/ws now greets from a post-handshake callback (httpd does not call the
handler for the upgrade).
The web UI is main's, plus v2's outputs editor, list search and
hostname/static IP settings; the bridge, Wi-Fi AP and led-tool parts
are gone. API tests follow main's behaviour (119 pass on the board).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Groups (registry of driver MACs, optionally scoped to a profile) become
the drivers' group membership, alongside z<zone id> for zones that still
name drivers. Zones play to their group_ids. Group and device routes for
driver config, brightness (global x groups x device x zone) and identify.
The push path takes main's message shape: select as a list, groups as a
filter (one GROUP_CMD per group, or JSON when a preset has a background),
short keys so JSON fits a frame.
Sequences follow main: lanes of {preset_id, beats} steps played to each
lane's groups, advanced by the mic's beats or a clock at
audio_simulated_bpm; a switch waits for the next beat or downbeat; sync-
phase, stop (clears the zone's drivers) and status. This replaces the
time-based per-zone sequencer and scene playback, as in main.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
POST /devices/ping broadcasts an ESP-NOW PING_REQ, collects the drivers'
PING_RSP for timeout_s and registers or renames the ones that answer. A
reply also counts as the driver being heard, so group updates go to it
again. POST /devices/groups sends every ESP-NOW driver its groups and
reports the acks. The devices modal gets the Ping drivers and Update
groups buttons from main, with per-driver ping dots.
UI files are now served with Cache-Control: no-cache and the firmware
build hash as ETag, so a browser picks up a new UI right after an update
instead of a day later.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every acked unicast holds a pending slot for its whole retry run, so zone
and profile edits with drivers switched off filled the link and the next
zone play timed out (503). Group updates now go to a driver that has
failed three messages in a row at most once every 30 s; one that comes
back still gets its groups when it announces or resyncs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Profiles seed presets, a default zone and a palette, and clone with their
own copies; deleting a profile removes what it owned. Zones get the v1
list shape, set-current, current, clone and content-fragment. Devices are
keyed by MAC with v1 validation and identify. Patterns: definitions, OTA
file and manifest, upload, driver, and send over ESP-NOW (the led-driver
pattern sources are embedded in the firmware). Pixel outputs get v1
validation and a DDP/Art-Net/sACN test pattern. Sequences, palettes and
settings follow v1 replies and validation, and /ws forwards browser
messages to the drivers.
The resource handlers move out of api.c into res_*.c, patterns.c and
outputs.c. cJSON now allocates from PSRAM: the store had grown enough to
starve internal RAM and abort the mic at boot. /status reports
free_internal.
The Wi-Fi AP and led-tool routes are left out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HTTP tests against a running controller (make test-api HOST=ip). They
snapshot every collection through /db and restore it afterwards. v1
behaviour v2 does not have yet is marked as a strict xfail.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
At 20 MHz the controller intermittently dropped every Ethernet frame
over about 900 bytes, while small packets got through. The web UI then
hung after the first chunk of a response. At 10 MHz, full-size pings
and repeated fetches of every UI file all succeed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
tools/driver_ota.py (make ota-drivers) pushes the driver's .py files
through the controller, one file per POST /drivers/ota/file. Drivers
skip files they already have, and the rest are committed together.
- one target: acked unicast, two chunks in flight
- several targets: each file is broadcast once, then each driver is
asked for its missing chunks and repaired by unicast
- rel: rel_send_seq, rel_wait and rel_send_wait, plus a callback for
the drivers' 0x26 status replies
- commands are retried, because status replies are not acked
- broadcast chunks are paced 50 ms apart: faster broadcast left C3
drivers unable to receive until reset
- bench results in docs/BENCH_TEST.md, endpoints in docs/API.md
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The ESP-IDF project, docs, tools, tests and web UI move from v2/ to the
root, and the Makefile, README, build scripts and test runner drop the
v2/ prefix.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Move the web assets and templates under v2/web, drop the old src/, lib/
and scripts, and update firmware, tools, docs and db files. Add the audio
page, LED test scripts and VPN autoconnect script.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
POST /ota writes the image to the idle app slot and reboots; GET /ota
reports the running slot. App rollback is enabled, and a new image confirms
itself after 10 s. Adds make ota HOST=<ip>, tools/ota.py and the led-tool
--ota update.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Adds the audio endpoints, the Makefile pointer, the first-run results of
the lossy-link and beat tests, the USB and analyzer latency methods and the
ESP32-C3 comparison (delivery, latency, frame rate, Wi-Fi start-up order).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
make build / flash / monitor / flash-monitor / log / size / menuconfig /
erase / clean / test run ESP-IDF in Docker and handle rootless ownership.
Adds the helper scripts behind log and test, and a --settle option for
usb_latency.py (an ESP32-C3 driver resets when its port is opened).
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Restores the live audio section from esp32-eth: /audio page, /audio.wav
stream, /beats event feed, POST /tap and /time, and the mic and beat state
in /status. The web build adds an Audio entry to the header menu and the
mobile dropdown for the v2 copy of index.html only, so the Pi UI is unchanged.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The controller sent a GROUPS packet on every driver hello. For a driver in
no zone that was an empty list, which replaced the groups stored on the
driver. It is now sent at announce and resync only when the list is not
empty; explicit zone and device edits still send every list.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
New ESP-IDF project in v2/ that replaces the Pi and the UART bridge:
- W5500 Ethernet, INMP441 beat/tempo detector (from esp32-eth), ESP-NOW master
- LittleFS data store and a JSON API over the Pi's db/*.json collections,
with /db import and export; web UI minified and gzipped at build time
- Zone play/stop as 0x4C GROUP_CMD, preset push/send as CMD (binary v2
envelope, byte-identical to src/util/binary_envelope.py), sequencer and
scenes, driver registration from the boot hello
- Reliable bulk link: acks with retransmit, fragments, state-version digest
and resync; beat frames sent twice with a lead so drivers fire together
- Bench tooling: lossy-link mode, synthetic beats with echo measurement,
USB and logic-analyzer latency scripts, and docs/BENCH_TEST.md
Needs the matching led-driver changes (p2p branch) to receive the link and
beat frames.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Client-side filter that hides non-matching rows as you type, persists
across list re-renders, and clears when the modal is reopened or on Esc.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add src/engine, modelled on technicalkiwi/portal's player and sequence runner:
- Pixel generator: runs the unchanged led-driver patterns under CPython
(utime shim + NeoPixel-like buffer) on a per-zone render thread and
streams frames to pixel outputs, with keepalive for static frames.
- Output drivers: DDP, Art-Net (ArtDMX/ArtSync), sACN/E1.31, USB-DMX
(Enttec Pro / Open DMX), plus an ESP32 preset output that reuses the
existing preset + select delivery path. Registry in db/output.json,
CRUD and test pattern at /outputs.
- Sequencer: timed preset chains per zone (portal step shape), deadline
scheduling, loop/repeat, resume after restart; legacy sequence records
are migrated. Zone play/stop, sequence and scene play/stop endpoints.
- CLI (python -m engine.cli), Outputs and Sequences modals, preset tiles
drive pixel outputs, API/README docs, engine test suite.
ESP32 firmware is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Serve GET /settings as JSON by removing duplicate HTML route (use /settings/page for the standalone UI).
- Save global_brightness via PUT; broadcast to connected drivers; push saved level when outbound WS connects.
- Zones UI loads brightness from GET /settings only (no localStorage).
- Bump led-driver submodule for settings.save on brightness with save flag.
- Extend API doc and endpoint tests for global_brightness.
Co-authored-by: Cursor <cursoragent@cursor.com>
Require serial_enabled true in settings to open serial_port; default false in
set_defaults for Wi-Fi-only and dev machines.
Co-authored-by: Cursor <cursoragent@cursor.com>
Add a broad set of LED patterns with metadata/tests and update zone/profile preset seeding, while refining mobile/desktop UI behavior for scrolling, brightness controls, and bulk pattern sending.