feat: Wi-Fi access point with a setting, password and boot button
The controller runs an AP (SSID = hostname, 192.168.5.1) next to ESP-NOW, on by default. Network settings gain an on/off switch (ap_enabled) and an optional WPA2 password (ap_password, 8-63 chars; empty is open). A button on D7 (GPIO44) held at boot forces the AP on. Wi-Fi now starts before Ethernet, and a missing W5500 no longer aborts the boot: the web server and mDNS start anyway so the AP stays usable. Network tuning found while testing over the AP: HTTP backlog 10 and 12 open sockets (the default 5 dropped the 6th SYN, a 1 s stall on every page load), larger TCP and Wi-Fi buffers, and IPv6 link-local addresses so mDNS answers AAAA queries (browsers waited about a second for them). Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
This commit is contained in:
1 parent
9989dd3062
commit
f85021d40d
11 files changed
+197
-22
No files matched your search
@@ -1182,6 +1182,20 @@
|
||||
<input type="text" id="hostname-input" placeholder="led-controller" pattern="[A-Za-z0-9\-]+" maxlength="63">
|
||||
<small>The controller answers at <code>hostname.local</code>.</small>
|
||||
</div>
|
||||
<div class="form-group">
|
||||
<label for="ap-enabled-toggle">Wi-Fi access point</label>
|
||||
<div class="nav-slide-toggle-wrap">
|
||||
<button type="button" role="switch" class="nav-slide-toggle-switch" id="ap-enabled-toggle" aria-pressed="true" aria-label="Wi-Fi access point enabled">
|
||||
<span class="nav-slide-toggle-track" aria-hidden="true"><span class="nav-slide-toggle-thumb"></span></span>
|
||||
</button>
|
||||
</div>
|
||||
<small>Named after the hostname; the controller is at <code>192.168.5.1</code> on it. Holding the button on D7 while the controller boots turns it on even when this is off.</small>
|
||||
</div>
|
||||
<div class="form-group">
|
||||
<label for="ap-password-input">Access point password</label>
|
||||
<input type="text" id="ap-password-input" placeholder="open (no password)" minlength="8" maxlength="63" autocomplete="off">
|
||||
<small>8 to 63 characters (WPA2). Leave empty for an open network.</small>
|
||||
</div>
|
||||
<div class="form-group">
|
||||
<label>Static IPs</label>
|
||||
<small>Tried in order each time the Ethernet link comes up; the first whose gateway answers is used. If none does, or the list is empty, DHCP is used. With no DHCP server, as on a cable straight to a PC, the controller is at <code>192.168.4.1</code>; give the PC a static IP such as <code>192.168.4.2</code>.</small>
|
||||
|
||||
Reference in new issue
Block a user