feat: Wi-Fi access point with a setting, password and boot button

The controller runs an AP (SSID = hostname, 192.168.5.1) next to ESP-NOW,
on by default. Network settings gain an on/off switch (ap_enabled) and an
optional WPA2 password (ap_password, 8-63 chars; empty is open). A button
on D7 (GPIO44) held at boot forces the AP on.

Wi-Fi now starts before Ethernet, and a missing W5500 no longer aborts the
boot: the web server and mDNS start anyway so the AP stays usable.

Network tuning found while testing over the AP: HTTP backlog 10 and 12 open
sockets (the default 5 dropped the 6th SYN, a 1 s stall on every page load),
larger TCP and Wi-Fi buffers, and IPv6 link-local addresses so mDNS answers
AAAA queries (browsers waited about a second for them).

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
This commit is contained in:
jimmyandClaude Sonnet 5.5 committed 2026-11-10 01:46:05 +13:00
1 parent 9989dd3062
commit f85021d40d
11 files changed
+197 -22

No files matched your search

+14
View File
@@ -1182,6 +1182,20 @@
<input type="text" id="hostname-input" placeholder="led-controller" pattern="[A-Za-z0-9\-]+" maxlength="63">
<small>The controller answers at <code>hostname.local</code>.</small>
</div>
<div class="form-group">
<label for="ap-enabled-toggle">Wi-Fi access point</label>
<div class="nav-slide-toggle-wrap">
<button type="button" role="switch" class="nav-slide-toggle-switch" id="ap-enabled-toggle" aria-pressed="true" aria-label="Wi-Fi access point enabled">
<span class="nav-slide-toggle-track" aria-hidden="true"><span class="nav-slide-toggle-thumb"></span></span>
</button>
</div>
<small>Named after the hostname; the controller is at <code>192.168.5.1</code> on it. Holding the button on D7 while the controller boots turns it on even when this is off.</small>
</div>
<div class="form-group">
<label for="ap-password-input">Access point password</label>
<input type="text" id="ap-password-input" placeholder="open (no password)" minlength="8" maxlength="63" autocomplete="off">
<small>8 to 63 characters (WPA2). Leave empty for an open network.</small>
</div>
<div class="form-group">
<label>Static IPs</label>
<small>Tried in order each time the Ethernet link comes up; the first whose gateway answers is used. If none does, or the list is empty, DHCP is used. With no DHCP server, as on a cable straight to a PC, the controller is at <code>192.168.4.1</code>; give the PC a static IP such as <code>192.168.4.2</code>.</small>