feat: Wi-Fi access point with a setting, password and boot button

The controller runs an AP (SSID = hostname, 192.168.5.1) next to ESP-NOW,
on by default. Network settings gain an on/off switch (ap_enabled) and an
optional WPA2 password (ap_password, 8-63 chars; empty is open). A button
on D7 (GPIO44) held at boot forces the AP on.

Wi-Fi now starts before Ethernet, and a missing W5500 no longer aborts the
boot: the web server and mDNS start anyway so the AP stays usable.

Network tuning found while testing over the AP: HTTP backlog 10 and 12 open
sockets (the default 5 dropped the 6th SYN, a 1 s stall on every page load),
larger TCP and Wi-Fi buffers, and IPv6 link-local addresses so mDNS answers
AAAA queries (browsers waited about a second for them).

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
This commit is contained in:
jimmyandClaude Sonnet 5.5 committed 2026-11-10 01:46:05 +13:00
1 parent 9989dd3062
commit f85021d40d
11 files changed
+197 -22

No files matched your search

+17
View File
@@ -103,6 +103,23 @@ menu "Beat detection config"
endmenu
menu "AP config"
config AP_BUTTON_GPIO
int "AP button GPIO (XIAO D7), -1 for none"
default 44
help
Push button to ground. Held while the controller boots, it turns
the Wi-Fi access point on even when the ap_enabled setting is off.
GPIO44 is also UART0 RX; the button only pulls it low at boot.
config AP_HOLD_MS
int "Hold time at boot (ms)"
range 100 5000
default 1000
endmenu
menu "ESP-NOW config"
config ESPNOW_CHANNEL