Each Haunting element can now be shown on its own on a black background. The Haunting code takes a config for how many of each to draw; solo modes use more of that kind, spread over the whole screen. Eyes and ghosts pick spawn spots clear of each other. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
esp32vga
800×600 VGA output with a web interface for the Seeed XIAO ESP32S3 Plus (16 MB flash, 8 MB PSRAM). It uses 8-bit colour (RGB332) from the LCD_CAM peripheral, with double buffering in PSRAM.
Content modes include a test pattern, plasma, starfield, clock, Mandelbrot, text messages, images (uploaded and dithered in the browser, with a 15-slot gallery in flash), a Halloween scene and "Haunting", a black-background mode for projecting onto fabric.
Wiring
| XIAO pin | GPIO | Signal | Resistor | VGA pin |
|---|---|---|---|---|
| D0 | 1 | Blue bit 0 | 820 Ω | 3 |
| D1 | 2 | Blue bit 1 | 430 Ω | 3 |
| D2 | 3 | Green bit 0 | 2 kΩ | 2 |
| D3 | 4 | Green bit 1 | 1 kΩ | 2 |
| D4 | 5 | Green bit 2 | 510 Ω | 2 |
| D5 | 6 | Red bit 0 | 2 kΩ | 1 |
| D6 | 43 | Red bit 1 | 1 kΩ | 1 |
| D7 | 44 | Red bit 2 | 510 Ω | 1 |
| D8 | 7 | HSYNC | 100 Ω | 13 |
| D9 | 8 | VSYNC | 100 Ω | 14 |
Ground goes to VGA pin 5 and pins 6–8, and VGA pin 9 (+5 V) is left unconnected.
Build and flash
You need ESP-IDF 5.4 or later.
cd vga_test
idf.py set-target esp32s3
idf.py build flash
The serial console is on the USB-Serial-JTAG port, because GPIO 43/44 carry colour bits.
Web interface
The board starts its own access point, ESP32-VGA (password esp32vga).
You can also give it your home WiFi details in Settings. Open its IP address
in a browser.
To update the firmware over WiFi, use the page's Settings section, or run:
curl -X POST --data-binary @build/vga_test.bin http://<board-ip>/api/ota