mrf24j40/examples/RX_only/RX_only.pde

/**
 * Example code for using a microchip mrf24j40 module to receive only
 * packets using plain 802.15.4
 * Requirements: 3 pins for spi, 3 pins for reset, chip select and interrupt
 * notifications
 * This example file is considered to be in the public domain
 * Originally written by Karl Palsson, karlp@tweak.net.au, March 2011
 */
#include <SPI.h>
#include <mrf24j.h>

const int pin_reset = 6;
const int pin_cs = 7;
const int pin_interrupt = 5;

Mrf24j mrf(pin_reset, pin_cs, pin_interrupt);

void setup() {
  Serial.begin(9600);

  mrf.set_pan(0xcafe);
  // This is _our_ address
  mrf.address16_write(0x6001); 
  mrf.set_channel(12);

  // uncomment if you want to receive any packet on this channel
  // mrf.set_promiscuous(true);

  attachInterrupt(0, interrupt_routine, CHANGE);   
}

volatile uint8_t gotrx;

void interrupt_routine() {
    // read and clear from the radio
    byte last_interrupt = mrf.read_short(MRF_INTSTAT);
    if (last_interrupt & MRF_I_RXIF) {
        gotrx = 1;
    }
}

void loop() {
    int tmp;
    interrupts();
    if (gotrx) {
        gotrx = 0;
        noInterrupts();
        mrf.rx_disable();

        // read start of rxfifo
        byte frame_length = mrf.read_long(0x300);
        Serial.print("received a packet ");
        Serial.print(frame_length, DEC);
        Serial.println(" bytes long");

        Serial.println("Packet data:");
        for (int i = 1; i <= frame_length; i++) {
            tmp = mrf.read_long(0x300 + i);
            Serial.print(tmp, HEX);
        }

        Serial.print("\r\nLQI/RSSI=");
        byte lqi = mrf.read_long(0x300 + frame_length + 1);
        byte rssi = mrf.read_long(0x300 + frame_length + 2);
        Serial.print(lqi, HEX);
        Serial.println(rssi, HEX);

        mrf.rx_enable();
        interrupts();
    }
}