avrdude/README-old.md

61 lines
2.4 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# AVRDUDE
[![Build Status](https://github.com/avrdudes/avrdude/actions/workflows/build.yml/badge.svg)](https://github.com/avrdudes/avrdude/actions/workflows/build.yml)
AVRDUDE - AVR Downloader Uploader - is a program for downloading and uploading
the on-chip memories of Microchips [AVR microcontrollers](https://en.wikipedia.org/wiki/AVR_microcontrollers).
It can program the Flash and EEPROM, and where supported by the programming
protocol, it can program fuse and lock bits.
AVRDUDE also supplies a direct instruction mode allowing one to issue any
programming instruction to the AVR chip regardless of whether AVRDUDE
implements that specific feature of a particular chip.
AVRDUDE was originally written in 2003 by Brian S. Dean. Since 2006, AVRDUDE has been maintained by Jörg Wunsch,
with the help of [various contributors](./AUTHORS).
The latest version of AVRDUDE is always available here:\
<https://github.com/avrdudes/avrdude>
## Getting AVRDUDE for Windows
To get AVRDUDE for Windows, install the latest version from the [Releases](http://download.savannah.gnu.org/releases/avrdude/) page.
Alternatively, you may [build AVRDUDE](https://github.com/avrdudes/avrdude/wiki) yourself from source.
## Getting AVRDUDE for Linux
To install AVRDUDE for Linux, install the package `avrdude` by running the following commands:
```console
sudo apt-get install avrdude
```
Alternatively, you may [build AVRDUDE](https://github.com/avrdudes/avrdude/wiki) yourself from source.
## Getting AVRDUDE for MacOS
On MacOS, AVRDUDE can be installed through Mac Ports.
Alternatively, you may [build AVRDUDE](https://github.com/avrdudes/avrdude/wiki) yourself from source.
## Using AVRDUDE
AVRDUDE is a command-line application. Run the command `avrdude` without any arguments for a list of options.
A typical command to program your HEX file into your AVR microcontroller looks like this:
```console
avrdude -c <programmer> -p <part> -U flash:w:<file>:i
```
For instance, to program an **Arduino Uno** connected to the serial port **COM1** with a HEX file called `blink.hex`,
you would run the following command:
```console
avrdude -c arduino -P COM1 -b 115200 -p atmega328p -D -U flash:w:objs/blink.hex:i
```
There are many different programmers and options that may be required for the programming to succeed.
For more information, refer to the [AVRDUDE documentation](http://download.savannah.gnu.org/releases/avrdude/avrdude-doc-6.4.pdf).