3412196cd9
The check for typos in -U memory names against a list of known memory names now happens after the config files have been read, so newly declared memory names can be considered. This commit also weakens the check against existence of a known memory: it is now sufficent for a name to pass when it could be the initial string of any known memory of any part. Any -U memory that cannot possibly be matched up with a known memory is considered a typo and leads to an exit before the programmer is opened. This to protect users from typos that leave a device partially programmed. When every -U memory name might be matching one of the known memories, the programming is attempted. If the part to be programmed turns out not to have a particular -U memory, AVRDUDE warns the user and skips this -U update. This to support unifying interfaces that call AVRDUDE with potentially more memories than the actual part has (eg, efuse on ATmega8). |
||
---|---|---|
.github/workflows | ||
atmel-docs | ||
src | ||
tools | ||
.editorconfig | ||
.gitattributes | ||
.gitignore | ||
AUTHORS | ||
CMakeLists.txt | ||
COPYING | ||
INSTALL | ||
NEWS | ||
README.md | ||
build.sh |
README.md
AVRDUDE
AVRDUDE - AVR Downloader Uploader - is a program for downloading and uploading the on-chip memories of Microchip’s AVR microcontrollers. It can program the Flash and EEPROM, and where supported by the programming protocol, it can program fuse and lock bits. AVRDUDE also supplies a direct instruction mode allowing one to issue any programming instruction to the AVR chip regardless of whether AVRDUDE implements that specific feature of a particular chip.
AVRDUDE was originally written in 2003 by Brian S. Dean. Since 2006, AVRDUDE has been maintained by Jörg Wunsch, with the help of various contributors.
The latest version of AVRDUDE is always available here:
https://github.com/avrdudes/avrdude
Documentation
Documentation for current and previous releases is on Github Pages.
Getting AVRDUDE for Windows
To get AVRDUDE for Windows, install the latest version from the Releases page.
Alternatively, you may build AVRDUDE yourself from source.
Getting AVRDUDE for Linux
To install AVRDUDE for Linux, install the package avrdude
by running the following commands:
sudo apt-get install avrdude
Alternatively, you may build AVRDUDE yourself from source.
Getting AVRDUDE for MacOS
On MacOS, AVRDUDE can be installed through Mac Ports.
Alternatively, you may build AVRDUDE yourself from source.
Using AVRDUDE
AVRDUDE is a command-line application. Run the command avrdude
without any arguments for a list of options.
A typical command to program your HEX file into your AVR microcontroller looks like this:
avrdude -c <programmer> -p <part> -U flash:w:<file>:i
For instance, to program an Arduino Uno connected to the serial port COM1 with a HEX file called blink.hex
,
you would run the following command:
avrdude -c arduino -P COM1 -b 115200 -p atmega328p -D -U flash:w:objs/blink.hex:i
There are many different programmers and options that may be required for the programming to succeed.
For more information, refer to the AVRDUDE documentation.