Commit Graph

147 Commits

Author SHA1 Message Date
joerg_wunsch e41d85664d Submitted by Lars Immisch:
patch #6750: Arduino support - new programmer-id
* arduino.c: New file, inherits stk500.c.
* arduino.h: New file.
* Makefile.am: Add arduino.c and arduino.h.
* config_gram.y: Add arduino keyword.
* lexer.l: (Ditto.)
* avrdude.conf.in: (Ditto.)
* avrdude.1: Document the new programmer type.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@808 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-25 09:39:04 +00:00
joerg_wunsch 3815878ed1 Submitted by Andrew O. Shadoura:
bug #25156: add direct SPI transfer mode
* bitbang.c: Implement direct SPI transfers.
* bitbang.h: (Ditto.)
* par.c: (Ditto.)
* pgm.c: (Ditto.)
* pgm.h: (Ditto.)
* term.c: Add the "spi" and "pgm" commands.
* avrdude.1: Document the changes.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@797 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-17 15:31:27 +00:00
joerg_wunsch 13edd1c5b6 Add the ATmega128RFA1, and document this.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@790 81a1dc3b-b13d-400b-aceb-764788c761c2
2009-02-05 16:20:29 +00:00
joerg_wunsch 6904c732f4 patch #6609: Using PCI parallel port cards on Windows
* ppiwin.c (ppi_open): If the port parameter passed from the
-p option is neither lpt1/2/3, try interpreting it directly as
a base address.
* avrdude.1: Document the change.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@786 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-11-05 20:53:51 +00:00
joerg_wunsch a37bbfab57 * main.c: Remember whether the device initialization worked, and
allow to continue with -F if it failed yet do not attempt to
perform anything on the device itself.  That way, -tF could be
specified for programmers like the STK500/STK600 even without a
device connected, just in order to allow changing parameters on
the programmer itself.
* avrdude.1: Document that possible use of the -F option.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@779 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-07-29 21:26:55 +00:00
joerg_wunsch 15fc8af421 First implementation of ATxmega support. By now, only the
PDI mode of the STK600 is supported.  Single-byte EEPROM
(and flash) updates do not work yet.
* avr.c: "boot" memory is a candidate memory region for paged
operations, besides "flash" and "eeprom".
* avrdude.conf.in: add ATxmega128A1 and ATxmega128A1revD
* avrpart.h: add the AVRPART_HAS_PDI flag (used to distinguish
ATxmega parts from classic AVRs), the nvm_base part field, and
the offset field for a memory region.
* config_gram.y: add "has_pdi", "nvm_base", and "offset"
* lexer.l: (Ditto.)
* main.c: disable auto_erase for ATxmega parts
* stk500v2.c: implement the XPROG functionality, and divert to
this for ATxmega parts
* avrdude.1: Document the changes.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@777 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-07-26 22:53:40 +00:00
joerg_wunsch 7f910d3be0 Contributed by Janos Sallai <janos.sallai@vanderbilt.edu>:
patch #6074: added support for crossbow's MIB510 programmer
* avrdude.conf.in: Add entry for mib510.
* stk500.c: Add special hooks to handle the MIB510 programmer.
It mostly talks STK500v1 protocol but has a special hello and
goodbye sequence, and uses a fixed block size of 256 bytes.
* doc/avrdude.texi: Document support for mib510.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@773 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-06-13 21:19:46 +00:00
joerg_wunsch 95200e0522 Contributed by Klaus Leidinger <klaus@mikrocontroller-projekte.de>:
Add check for buffermode feature, and use it if present.  Can be
turned off using -x no_blockmode.
* avr910.c: Implement buffermode test and usage.
* avrdude.1: Document -x no_blockmode.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@771 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-06-07 20:55:04 +00:00
joerg_wunsch da0f0105bb Add support for the -x devcode option, and document it.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@769 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-24 21:22:04 +00:00
joerg_wunsch 8b391a8150 Add initial support for the Atmel STK600, for
"classic" AVRs (AT90, ATtiny, ATmega) in both,
ISP and high-voltage programming modes.
* Makefile.am: Add -lm.
* avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp.
* config_gram.y: Add support for the stk600* keywords.
* lexer.l: (Ditto.)
* pgm.h: Add the "chan" parameter to set_varef().
* stk500.c: (Ditto.)
* serial.h: Add USB endpoint support to struct filedescriptor.
* stk500v2.c: Implement the meat of the STK600 support.
* stk500v2.h: Add new prototypes for stk600*() programmers.
* stk500v2_private.h: Add new constants used in the STK600.
* term.c: Add AREF channel support.
* usb_libusb.c: Automatically determine the correct write
endpoint ID, the STK600 uses 0x83 while all other tools use
0x82.  Propagate the EP to use through struct filedescriptor.
* usbdevs.h: Add the STK600 USB product ID.
* tools/get-stk600-cards.xsl: XSL transformation for
targetboards.xml to obtain the list of socket and routing
card IDs, to be used in stk500v2.c (for displaying the
names).
* tools/get-stk600-devices.xsl: XSL transformation for
targetboards.xml to obtain the table of socket/routing cards
and their respective AVR device support for doc/avrdude.texi.
* avrdude.1: Document all the STK600 stuff.
* doc/avrdude.texi: Ditto.  Added a new chapter for
Programmer Specific Information.

Thanks to Eirik Rasmussen from Atmel Norway for his support in
getting this code running within that short amount of time!


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
joerg_wunsch 0c8bd41a10 main.c, pgm.c, pgm.h: Add the -x option to pass extended parameters to
the programmer backend.

jtagmkII.c: Implement the extended parameter jtagchain=
to support JTAG daisy-chains.

avrdude.1, doc/avrdude.texi: Document all of the above.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@761 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-11-06 19:42:16 +00:00
joerg_wunsch 3a69fb7f64 Submitted by Wolfgang Moser:
patch #6121: ISP support for the C2N232I device (serial port
bitbanging)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@755 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 22:37:38 +00:00
joerg_wunsch eb27298b5d Submitted by <ladyada@gmail.com>:
Patch #6233: Add support for USBtinyISP programmer
* usbtiny.c: New file.
* usbtiny.h: (Ditto.)
* Makefile.am: Include usbtiny into the build.
* avrdude.conf.in: (Ditto.)
* config_gram.y: (Ditto.)
* lexer.l: (Ditto.)
* avrdude.1: Document the usbtiny support.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@749 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 18:03:02 +00:00
joerg_wunsch 962494cb56 Forgot to include USBasp into the list of supported programmers.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@748 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 17:53:58 +00:00
joerg_wunsch be94329a8e Sort list of supported programmers into
alphabetical order, add all missing programmers.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@747 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 16:17:01 +00:00
joerg_wunsch 8f04e0fd1c Mention frank-stk200 in the docs.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@708 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-12-21 22:05:56 +00:00
joerg_wunsch 26e8bc656a Submitted by Christian Starkjohann:
patch #5507: Support for AVR-Doper USB programmer in HID mode

* configure.ac: Add hooks to detect the Win32 HID library,
as well as the existence of <ddk/hidsdi.h>.
* Makefile.am: Add new files.
* my_ddk_hidsdi.h: (New file.)
* ser_avrdoper.c: (New file.)
* serial.h: Add declaration for avrdoper_serdev.
* stk500v2.c: Add hook to divert to the AVR Doper code.
* avrdude.1: Document the AVR Doper support.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@704 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-12-20 23:43:34 +00:00
joerg_wunsch 8bd117dccf Implement EEPROM access through debugWire.
* jtagmkII.c: Extend the jtagmkII_read_byte() and
jtagmkII_write_byte() methods to handle EEPROM through
debugWire.

* avrpart.h: Implement the "flash instruction" parameter.
* config_gram.y: (Ditto.)
* lexer.l: (Ditto.)
* avrdude.conf.in: (Ditto.)

* avrdude.1: Document the EEPROM access through dW.
* doc/avrdude.texi: (Ditto.)

* tools/get-dw-params.xsl: Extend to extract the flash
instruction field.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@693 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-23 07:07:06 +00:00
joerg_wunsch 8ed8377442 Implement debugWire programming support. Several limitations are
imposed by debugWire itself, so effectively, only flash ROM can be
read and written.

Currently, the required changes to avrdude.conf.in are only present
for the ATtiny44.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@688 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-20 23:23:37 +00:00
joerg_wunsch c35b4481dc Implement and document HVSP and PP modes for the AVR Dragon.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@677 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-01 21:47:25 +00:00
joerg_wunsch 2f798223d1 Add support for the AVR Dragon (JTAG and ISP mode).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@675 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-10-26 21:14:10 +00:00
joerg_wunsch 319d25efc4 Submitted by John Voltz: add AVR053 oscillator calibration.
* main.c: Add the -O option.
* pgm.c: Add the hook for the perform_osccal() method.
* pgm.h: (Ditto.)
* stk500v2.c: Implement perform_osccal().
* avrdude.1: Document the -O option.
* doc/avrdude.texi: (Ditto.)
Partially closes bug #17487: AVR RC oscillator calibration
routine not supported (feature request)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@671 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-10-09 14:34:24 +00:00
joerg_wunsch 2f73c4686e Add the "stk500generic" programmer that auto-probes for STK500
either firmware version 1 or 2.
* Makefile.am (avrdude_SOURCES): add the new files
stk500generic.c and stk500generic.h.
* avrdude.conf.in: Add the stk500generic programmer type, and
change the "stk500" entry to point to this programmer.
* config_gram.y: Add the stk500generic keyword.
* lexer.l: (Ditto.)
* stk500.c: Change the stk500v1 code to not call exit()
prematurely when failing to open the programmer, but instead
return an error status.
* stk500generic.c: (New file.) Stub programmer implementation.
Probe for either stk500v1 or stk500v2, and adjust the current pgm
appropriately.
* stk500generic.h: (New file.) Declare the public interface(s)
of stk500generic.c.
* doc/avrdude.texi: Document the changed behaviour of stk500.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@663 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-19 22:27:30 +00:00
joerg_wunsch cc44c564f8 More texinfo incompatibilities to avoid: replace @headitem by @item
and @strong{}


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@659 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-14 20:07:14 +00:00
joerg_wunsch d18c50d0b1 Not all texinfo versions understand indicateurl{}, so resort to url{}.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@658 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-14 20:00:55 +00:00
joerg_wunsch e114f6666b Convert some of the tables to multitables
in order to beautify the result.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@657 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-12 12:01:34 +00:00
joerg_wunsch 333be851b9 Contributed by Thomas Fischl: add support for USBasp.
patch #4686: Add support for USBasp, a simple USB programmer
* usbasp.c: New file, implement the USBasp driver.
* usbasp.h: New file, interface declarations for USBasp.
* Makefile.am: Wire the new files into the build.
* avrdude.conf.in: Add the usbasp programmer entry.
* config_gram.y: Add the usbasp token.
* lexer.l: (Ditto.)
* avrdude.1: Document the USBasp programmer.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@656 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-10 20:41:00 +00:00
joerg_wunsch 8ebe96ee2b Implement -U filename as a shorthand for -U flash:w:filename:a.
This has once been suggested by Brian Dean.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@655 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-08 21:52:45 +00:00
joerg_wunsch 92cbfc744a Implement numerical output formats for decimal, hexadecimal, octal,
and binary numbers.

Closes bug #16129: more output formats for fuse bits (avrdude
enhancement request)

* fileio.c: Implement fileio_num() and the itoa_simple() helper function.
* fileio.h: Add new file formats to FILEFMT.
* main.c: Parse the new file formats.
* avrdude.1: Document all this.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@654 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-08 21:28:24 +00:00
joerg_wunsch ee36ee5ab5 Describe how to disable the DWEN fuse.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@651 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-07 20:42:01 +00:00
joerg_wunsch a7014c1b56 The avr109 programmer type no longer chokes on a wrong avr910 device
ID, so remove that description.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@648 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-07 19:34:17 +00:00
joerg_wunsch f8796c29cc Add support for the JTAG ICE mkII in ISP mode.
* avrdude.conf.in (jtag2isp): New programmer entry.
* config_gram.y: Add K_JTAG_MKII_ISP.
* jtagmkII.c: Restructure and export some more functions.
* jtagmkII.h: Declare exported functions.
* jtagmkII_private.h: Prepare file to be included in stk500v2.c.
* lexer.l: Add jtagmkii_isp token.
* stk500v2.c: Implement glue to jtagmkII.c.
* stk500v2.h: Declare stk500v2_jtagmkII_initpgm().
* avrdude.1: Document the new programmer support.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@643 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-06 20:06:07 +00:00
joerg_wunsch 07735be08b The major part of this change has been contributed by
<andyw@pobox.com>.

Implements patch #4635: Add support for terminal/console servers for
serial programmers

* ser_posix.c: Add net_open(), and divert to it for net:host:port.
* ser_win32.c: Recognize net:host:port, and bail out.
* avrdude.1: Document the net:host:port connection option.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@635 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-08-31 20:52:47 +00:00
joerg_wunsch 0a555b3e8f Make CVS ignore all generated files.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@623 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-08-23 15:00:11 +00:00
joerg_wunsch 501918258b Submitted by Neil Davey:
patch #4539: Ability to control the bit clock (usleep) delay
for ppi interface
* bitbang.c: Implement bitbang_delay() and its calibration.
* bitbang.h: Declare bitbang_delay().
* main.c: Add the ispdelay option (-i).
* pgm.h (struct programmer_t): Add the ispdelay parameter.
* par.c: Add calls to bitbang_delay() when requested.
* serbb_posix.c: (Ditto.)
* serbb_win32.c: (Ditto.)
* avrdude.1: Document the new -i option.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@610 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-08-17 15:06:20 +00:00
joerg_wunsch e9b535423e Implement STK500 (v2) HVSP mode.
* stk500v2.c: Add new functions for HVSP support.
* stk500v2.h: Add prototype for the stk500hvsp programmer.
* avrpart.h: Add fields to struct avrpart for new features.
* config_gram.y: Extend the configuration syntax for new
features required for HVSP support.
* lexer.l: (Ditto.)
* avrdude.conf.in: Add HVSP support for ATtiny13 and
ATtiny45 as an example.
* avrdude.1: Document stk500hvsp.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@595 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-07-21 21:53:49 +00:00
joerg_wunsch 05139aa2d0 Document the stk500pp support.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@593 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-07-19 21:34:34 +00:00
joerg_wunsch 024ef322d7 Implement extended addressing needed for the ATmega256x devices.
Document ATmega256x support.  Also document Solaris port defaults
in avrdude.texi.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@584 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-05-25 14:38:08 +00:00
joerg_wunsch 108793bc7a Contributed by dcm@mit.edu: add support for the
AVRISP mkII device. (Savannah patch #4789.)
* serial.h: Declare usb_serdev_frame device descriptor.
* stk500v2.c: Implementation of the AVRISP mkII handling.
* usb_libusb.c: Add USB handling for short-frame delimited
AVRISP mkII USB protocol; add distinction of different
devices in usbdev_open().
* jtagmkII.c: Tell usbdev_open() to search for the JTAG ICE mkII.
* usbdevs.h: (New file.)
* Makefile.am: Add usbdevs.h, as well as some other forgotten
files "make distcheck" complained about.
* avrdude.conf.in: Add more aliases for the AVRISP mkII.
* avrdude.1: Document how to use the AVRISP mkII.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@564 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-01-12 23:13:50 +00:00
joerg_wunsch f2cf2650da Document the JTAG ICE mkI support.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@559 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-11-29 22:58:04 +00:00
joerg_wunsch d6caf49dd0 Add support for the ATmega640/1280/1281 devices.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@535 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-10-09 09:29:24 +00:00
joerg_wunsch 63638e9911 Polish up the docs a bit. Use smallexample instead of example for
wide tty output.  Document a trick to find out about the serial
numbers of all JTAG ICEs attached to USB.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@534 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-27 08:25:18 +00:00
bdean 778a066640 Previous commit was the wrong fix, instead look for an alternate file
for the texi2html split conditional.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@530 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-22 17:51:59 +00:00
bdean d189a174ee Fix conditional for the directory existance test.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@528 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-21 21:06:15 +00:00
joerg_wunsch d5464326e3 In lieu of Michael Holzt, add his serbb serial bit-bang code so it
will be available in the upcoming avrdude release.

His addition has been implemented by means of a generalized bit-bang
interface that contains the common part between serial and paralle
bit-bang devices, and specialed backends for the serial and parallel
port connections.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@515 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-18 20:12:23 +00:00
joerg_wunsch d1f0e2c6df Improve the doc generation a bit.
Do not rebuild the docs again if they are up-to-date.  This avoids as
well that they are rebuilt during "make install".

Use mv -f instead of plain mv in order to install the docs into the
respective subdirs, in order to avoid silly questions for non-writable
destination files.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@508 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-17 20:04:31 +00:00
joerg_wunsch 2ed9f462d2 Merge the changes from avrdude.1 rev 1.47.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@505 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-17 19:12:20 +00:00
joerg_wunsch 61f6a06038 avrdude.1: document the memtypes for -U
doc/avrdude.texi: (Ditto.)
Closes bug #13501: <memtype> should be listed in the man page


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@500 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-16 20:38:29 +00:00
joerg_wunsch 8ae17ae42a * doc/Makefile.am: add logic to detect the misf^H^H^H^H
gratitous API change in recent versions of texi2html where
the output directory has changed names.
Fix for:
bug #13026: The build fails with texi2html 1.76
bug #12715: make issues during install
patch #3091: commandline fix for latest version of texi2html


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@499 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-16 20:18:37 +00:00
joerg_wunsch f3c545ffc3 Make "jtag2" an alias for "jtag2fast", people will certainly love it
that way. ;-)  For those who want the 19200 Bd one, add "jtag2slow".


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@495 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-14 19:49:27 +00:00
joerg_wunsch 4bd79b2880 Add support for the ATtiny25/45/85. Note that only the ATtiny45
appears to have a complete XML description right now.

Document all the recently added new devices: AT90PWM2/3,
ATmega164/324/644, ATmega329x/649x, ATtiny25/45/85.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@489 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-08-28 19:37:59 +00:00
joerg_wunsch eed121e91f Extend the butterfly code to fully support AVR109 boot loaders. Notable
changes to butterfly.c include:

. do not exit for unsupported devices but return -1 from the init function
  instead; that way the -F option can be used to continue anyway

. honor the -b option as arbitrary bootloaders could be implemented with
  any baud rate, not just the fixed 19200 Bd used by the butterfly

. implement functionality to read the fuse and lock bits, and write the
  (boot) lock bits, resp.

. fix the signature byte order

The remaining files document the new functionality.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@486 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-07-28 16:06:35 +00:00
joerg_wunsch 2d236ed812 Implement and document a libusb-based USB transport for the JTAG ICE
mkII.

The serial transport methods have been moved out into a record of
function pointers for that purpose, defaulting to the actual serial
connection that natively applies to the hosting system.  Iff inside
the JTAG ICE mkII handler a port name starting with "usb" has been
detected, the record of function pointers is switched to USB.
Optionally, a serial number might be specified, so only the JTAG ICE
mkII matching the given serial number will be opened.  The match is
done right-to-left, so only the least significant bytes of the serial
number need to be given.

In order to make the change as least intrusive to existing drivers as
possible, the entire naming scheme of the serial_foo() function entry
points has been maintained as access macros that encapsulate these
into the respective indirect function calls via serdev->foo().


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@478 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-06-19 21:38:03 +00:00
joerg_wunsch 3b22cb93c0 Document that the JTAG ICE mkII code currently cannot write to flash
one byte at a time.  Also mention the bug tracker interface on
savannah.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@471 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-19 04:49:46 +00:00
joerg_wunsch 060f870bfe Umm, add the new programmer types to the texinfo documentation as well.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@465 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-14 08:06:18 +00:00
joerg_wunsch b49dc8f645 Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).

Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).

The JTAG ICE mkII support should be considered alpha to beta quality
at this point.  Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required.  Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).

Note that for the JTAG ICE, I did change a few things in the internal
API.  Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation).  Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character.  The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery.  The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
arcanum 107c46ff81 Document new Safe Mode feature and switch.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@443 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-01-24 21:26:14 +00:00
hinni 5b3bcb893e NEWS, doc/TODO: Updated NEWS and TODO
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@428 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-07 10:13:25 +00:00
hinni bcb78e8e05 stk500.c, term.c, doc/avrdude.texi, avrdude.1: added "sck"-command to the terminal mode. This command allows slowing down of the SCK of STK500-programmers.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@427 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-07 08:59:07 +00:00
hinni b26c4652fc avrdude.conf.in: Added support for tiny13 (contributed by Pawel Moll), mega48 and mega88 (contributed by Galen Seitz)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@418 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-06-22 17:38:54 +00:00
hinni db1a46c6ee * avrdude.1, doc/avrdude.texi, doc/TODO: Removed the deprecated options from documentation
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@411 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-02-10 00:20:51 +00:00
hinni 34c5ee9f0d * main.c: Removed deprecated options.
* doc/TODO: Still need to remove these options from documentation


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@410 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-02-09 23:43:42 +00:00
hinni 3ee1be5529 * pgm.[ch], main.c, par.c, avr910.c, butterfly.c, stk500.c:
Move save/restore-functionality into open/close.
	* par.c: open/close now saves/restores PPICTRL, too.
	* TODO: exitspecs don't work if RESET is in PPICTRL.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@407 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-28 20:01:44 +00:00
hinni 4c77350f24 * doc/avrdude.texi: get rid of those black boxes marking "overfull hbox"
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@401 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-17 19:38:15 +00:00
hinni 4b8db9e76e * doc/avrdude.texi: new appendix "Troubleshooting"
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@400 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-17 14:36:47 +00:00
hinni 93f2a54036 * avr910.c, avrpart.c, avrpart.h, doc/TODO: Look up devicecode and report device.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@399 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-12 22:48:50 +00:00
hinni 1fe6d367ce * avr910.c, pgm.c, pgm.h, config_gram.y, lexer.l: Add new configuration parameter baudrate to support avr910-programmers with non-standard baudrates
* avrdude.conf.in, doc/avrdude.texi: Added "baudrate" to documentation.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@398 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-03 18:36:44 +00:00
hinni 089c6ea144 doc/TODO: Removed two items.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@396 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-03 18:14:46 +00:00
arcanum b8f99c725b *doc/avrdude.texi: Update devices and programmers supported.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@392 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-12-01 19:42:25 +00:00
arcanum 523f7549d3 *doc/avrdude.texi: Add missing -D option to user manual.
[This fixes bug #6804]


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@391 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-12-01 19:02:10 +00:00
joerg_wunsch 9dd5e43b20 Make the -U parser tolerate colons in filenames.
Document the change, including changing one of the texinfo examples
to use a Windows-like filename that contains a space (and thus
requires quoting).

This fixes bug #6764.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@386 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-11-26 22:05:02 +00:00
arcanum b1c4bb0b9c * doc/TODO: Updated TODO list.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@372 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-09-24 15:34:04 +00:00
arcanum d890ae5341 * doc/avrdude.texi: Minor corrections. Change description of -P
to reference platform dependencies.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@370 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-09-18 18:11:25 +00:00
bdean 4df01a2189 Add an extended example of using the -U option to update the flash,
eeprom, efuse, hfuse, and lfuse on a single command line.  Much of the
output had to be ommitted from the example since the texi commands for
formatting the example don't allow page breaks within the example.  If
someone knows a better way to format it, please feel free to do so.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@361 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-09-04 01:01:40 +00:00
arcanum b8e9e89d07 * doc/avrdude.texi: Add note about privileges needed to load
the giveio driver for Windows.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@360 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-09-02 16:40:06 +00:00
bdean 1ec1c1c2ea Fix fuse bit setting example. This closes bug #4027 submitted by
(unknown).


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@350 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-08-28 14:00:07 +00:00
bdean e09ce4ec22 Fix example.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@345 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-08-24 20:53:25 +00:00
bdean 1015d6ab46 Update a few programmer entries (descriptions only).
Add the supported programmer list to the manual.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@343 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-08-24 18:31:08 +00:00
bdean 6183fc22a2 Remove debugging printf.
Update manual to reflect the new -U option.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@342 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-08-24 18:05:46 +00:00
troth e341f7d3ec * avrdude.1: Document the -q option.
* doc/avrdude.texi: Document the -q option.
Fix some typos left over from pasting in man output.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@339 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-08-01 20:11:21 +00:00
joerg_wunsch c79d3c75b0 Add support for displaying and changing the various STK500 operational
parameters.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@336 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-07-24 21:26:28 +00:00
troth 3817b01d8d * doc/TODO: Add note about avr910 device codes.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@327 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-05-13 21:41:36 +00:00
troth d1d76f9e9c * configure.ac: Add cvs suffix back to version.
* doc/TODO: Add a few items.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@316 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-04-19 05:26:23 +00:00
troth 897f2afd5b * configure.ac: Set version to 4.1.0.
* doc/avrdude.texi: Add note about avr910 programmer type.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@314 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-04-18 04:41:45 +00:00
troth edd634c6f6 * Makefile.am: Add CLEANFILES to remove all files from a make.
* doc/Makefile.am: Ditto


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@283 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-12 02:09:57 +00:00
arcanum f2658adc56 Add Install and Documentation sections for Windows. Fix typo.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@278 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-11 00:00:30 +00:00
troth d49018d1ce * doc/avrdude.texi: Add comment before each node to make them stand out better.
Use @option{} command for options instead of @code{}.
Merge FreeBSD and Linux platform dependent information.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@274 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-10 22:07:30 +00:00
arcanum 92294a3b65 Add notes about ability to list parts and list programmers in the config file in -p and -c descriptions. Change info about where to find Windows search method in -C description.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@270 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-06 21:46:20 +00:00
troth 68636562e5 * configure.ac: Add --enable-versioned-doc option and set DOC_INST_DIR.
* doc/Makefile.am: Add rules to install docs in DOC_INST_DIR.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@267 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-06 07:48:08 +00:00
troth b935a32263 Delete the lines which where commented out in previous commit.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@266 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-06 06:53:39 +00:00
troth fef132199c * configure.ac: Remove hack to make work with automake-1.5.
* doc/Makefile.am: Remove extra rules that were needed to work with
	automake-1.5.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@265 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-06 06:45:54 +00:00
arcanum e1d8ea7bee Minor Windows doc corrections.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@253 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-04 21:13:45 +00:00
arcanum ebb01521aa Add TODO file.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@252 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-04 18:17:43 +00:00
troth b03e04dfe1 * doc/Makefile.am: Add ps and pdf rules since they aren't supplied by
automake versions prior to 1.7.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@247 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-03 18:42:04 +00:00
troth b0528bfef4 * doc/avrdude.texi: Add node and menu information for the info system.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@246 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-03 02:03:49 +00:00
troth c8da7420c9 * Makefile.am (SUBDIRS): Add doc dir.
* configure.ac (AC_CONFIG_FILES): Add doc/Makefile.
* doc/Makefile.am: New file.
* doc/avrdude.texi: Use automatically generated version.texi.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@245 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-03 01:09:52 +00:00
bdean b8c21b8b21 Initial manual.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@244 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-02 01:32:24 +00:00