Commit Graph

120 Commits

Author SHA1 Message Date
Joerg Wunsch 8339bfa6f7 Add support for the -x devcode option, and document it.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@769 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-24 21:22:04 +00:00
Joerg Wunsch ec2df64017 Add initial support for the Atmel STK600, for
"classic" AVRs (AT90, ATtiny, ATmega) in both,
ISP and high-voltage programming modes.
* Makefile.am: Add -lm.
* avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp.
* config_gram.y: Add support for the stk600* keywords.
* lexer.l: (Ditto.)
* pgm.h: Add the "chan" parameter to set_varef().
* stk500.c: (Ditto.)
* serial.h: Add USB endpoint support to struct filedescriptor.
* stk500v2.c: Implement the meat of the STK600 support.
* stk500v2.h: Add new prototypes for stk600*() programmers.
* stk500v2_private.h: Add new constants used in the STK600.
* term.c: Add AREF channel support.
* usb_libusb.c: Automatically determine the correct write
endpoint ID, the STK600 uses 0x83 while all other tools use
0x82.  Propagate the EP to use through struct filedescriptor.
* usbdevs.h: Add the STK600 USB product ID.
* tools/get-stk600-cards.xsl: XSL transformation for
targetboards.xml to obtain the list of socket and routing
card IDs, to be used in stk500v2.c (for displaying the
names).
* tools/get-stk600-devices.xsl: XSL transformation for
targetboards.xml to obtain the table of socket/routing cards
and their respective AVR device support for doc/avrdude.texi.
* avrdude.1: Document all the STK600 stuff.
* doc/avrdude.texi: Ditto.  Added a new chapter for
Programmer Specific Information.

Thanks to Eirik Rasmussen from Atmel Norway for his support in
getting this code running within that short amount of time!


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
2008-03-14 13:00:08 +00:00
Joerg Wunsch f5c3910d48 main.c, pgm.c, pgm.h: Add the -x option to pass extended parameters to
the programmer backend.

jtagmkII.c: Implement the extended parameter jtagchain=
to support JTAG daisy-chains.

avrdude.1, doc/avrdude.texi: Document all of the above.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@761 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-11-06 19:42:16 +00:00
Joerg Wunsch eca3f00f65 Submitted by Wolfgang Moser:
patch #6121: ISP support for the C2N232I device (serial port
bitbanging)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@755 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 22:37:38 +00:00
Joerg Wunsch 190a4b87e8 Submitted by <ladyada@gmail.com>:
Patch #6233: Add support for USBtinyISP programmer
* usbtiny.c: New file.
* usbtiny.h: (Ditto.)
* Makefile.am: Include usbtiny into the build.
* avrdude.conf.in: (Ditto.)
* config_gram.y: (Ditto.)
* lexer.l: (Ditto.)
* avrdude.1: Document the usbtiny support.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@749 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 18:03:02 +00:00
Joerg Wunsch 3aa7889d2a Forgot to include USBasp into the list of supported programmers.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@748 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 17:53:58 +00:00
Joerg Wunsch 75937c8678 Sort list of supported programmers into
alphabetical order, add all missing programmers.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@747 81a1dc3b-b13d-400b-aceb-764788c761c2
2007-10-29 16:17:01 +00:00
Joerg Wunsch ab6b0be5de Mention frank-stk200 in the docs.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@708 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-12-21 22:05:56 +00:00
Joerg Wunsch 6524723327 Submitted by Christian Starkjohann:
patch #5507: Support for AVR-Doper USB programmer in HID mode

* configure.ac: Add hooks to detect the Win32 HID library,
as well as the existence of <ddk/hidsdi.h>.
* Makefile.am: Add new files.
* my_ddk_hidsdi.h: (New file.)
* ser_avrdoper.c: (New file.)
* serial.h: Add declaration for avrdoper_serdev.
* stk500v2.c: Add hook to divert to the AVR Doper code.
* avrdude.1: Document the AVR Doper support.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@704 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-12-20 23:43:34 +00:00
Joerg Wunsch 84b633e41d Implement EEPROM access through debugWire.
* jtagmkII.c: Extend the jtagmkII_read_byte() and
jtagmkII_write_byte() methods to handle EEPROM through
debugWire.

* avrpart.h: Implement the "flash instruction" parameter.
* config_gram.y: (Ditto.)
* lexer.l: (Ditto.)
* avrdude.conf.in: (Ditto.)

* avrdude.1: Document the EEPROM access through dW.
* doc/avrdude.texi: (Ditto.)

* tools/get-dw-params.xsl: Extend to extract the flash
instruction field.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@693 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-23 07:07:06 +00:00
Joerg Wunsch 9b9df3e773 Implement debugWire programming support. Several limitations are
imposed by debugWire itself, so effectively, only flash ROM can be
read and written.

Currently, the required changes to avrdude.conf.in are only present
for the ATtiny44.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@688 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-20 23:23:37 +00:00
Joerg Wunsch 31f93ccb59 Implement and document HVSP and PP modes for the AVR Dragon.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@677 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-11-01 21:47:25 +00:00
Joerg Wunsch 90d6100d88 Add support for the AVR Dragon (JTAG and ISP mode).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@675 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-10-26 21:14:10 +00:00
Joerg Wunsch 2cfccda03d Submitted by John Voltz: add AVR053 oscillator calibration.
* main.c: Add the -O option.
* pgm.c: Add the hook for the perform_osccal() method.
* pgm.h: (Ditto.)
* stk500v2.c: Implement perform_osccal().
* avrdude.1: Document the -O option.
* doc/avrdude.texi: (Ditto.)
Partially closes bug #17487: AVR RC oscillator calibration
routine not supported (feature request)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@671 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-10-09 14:34:24 +00:00
Joerg Wunsch bf388ff428 Add the "stk500generic" programmer that auto-probes for STK500
either firmware version 1 or 2.
* Makefile.am (avrdude_SOURCES): add the new files
stk500generic.c and stk500generic.h.
* avrdude.conf.in: Add the stk500generic programmer type, and
change the "stk500" entry to point to this programmer.
* config_gram.y: Add the stk500generic keyword.
* lexer.l: (Ditto.)
* stk500.c: Change the stk500v1 code to not call exit()
prematurely when failing to open the programmer, but instead
return an error status.
* stk500generic.c: (New file.) Stub programmer implementation.
Probe for either stk500v1 or stk500v2, and adjust the current pgm
appropriately.
* stk500generic.h: (New file.) Declare the public interface(s)
of stk500generic.c.
* doc/avrdude.texi: Document the changed behaviour of stk500.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@663 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-19 22:27:30 +00:00
Joerg Wunsch 94d5bfaf58 More texinfo incompatibilities to avoid: replace @headitem by @item
and @strong{}


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@659 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-14 20:07:14 +00:00
Joerg Wunsch 96a2a84914 Not all texinfo versions understand indicateurl{}, so resort to url{}.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@658 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-14 20:00:55 +00:00
Joerg Wunsch 51012e9af8 Convert some of the tables to multitables
in order to beautify the result.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@657 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-12 12:01:34 +00:00
Joerg Wunsch 637e389ef3 Contributed by Thomas Fischl: add support for USBasp.
patch #4686: Add support for USBasp, a simple USB programmer
* usbasp.c: New file, implement the USBasp driver.
* usbasp.h: New file, interface declarations for USBasp.
* Makefile.am: Wire the new files into the build.
* avrdude.conf.in: Add the usbasp programmer entry.
* config_gram.y: Add the usbasp token.
* lexer.l: (Ditto.)
* avrdude.1: Document the USBasp programmer.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@656 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-10 20:41:00 +00:00
Joerg Wunsch 501a1606b4 Implement -U filename as a shorthand for -U flash:w:filename:a.
This has once been suggested by Brian Dean.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@655 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-08 21:52:45 +00:00
Joerg Wunsch 876d75a1a8 Implement numerical output formats for decimal, hexadecimal, octal,
and binary numbers.

Closes bug #16129: more output formats for fuse bits (avrdude
enhancement request)

* fileio.c: Implement fileio_num() and the itoa_simple() helper function.
* fileio.h: Add new file formats to FILEFMT.
* main.c: Parse the new file formats.
* avrdude.1: Document all this.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@654 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-08 21:28:24 +00:00
Joerg Wunsch a41fdc3385 Describe how to disable the DWEN fuse.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@651 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-07 20:42:01 +00:00
Joerg Wunsch 27216a0cd6 The avr109 programmer type no longer chokes on a wrong avr910 device
ID, so remove that description.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@648 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-07 19:34:17 +00:00
Joerg Wunsch 995bd68034 Add support for the JTAG ICE mkII in ISP mode.
* avrdude.conf.in (jtag2isp): New programmer entry.
* config_gram.y: Add K_JTAG_MKII_ISP.
* jtagmkII.c: Restructure and export some more functions.
* jtagmkII.h: Declare exported functions.
* jtagmkII_private.h: Prepare file to be included in stk500v2.c.
* lexer.l: Add jtagmkii_isp token.
* stk500v2.c: Implement glue to jtagmkII.c.
* stk500v2.h: Declare stk500v2_jtagmkII_initpgm().
* avrdude.1: Document the new programmer support.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@643 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-09-06 20:06:07 +00:00
Joerg Wunsch 9e0c0b850a The major part of this change has been contributed by
<andyw@pobox.com>.

Implements patch #4635: Add support for terminal/console servers for
serial programmers

* ser_posix.c: Add net_open(), and divert to it for net:host:port.
* ser_win32.c: Recognize net:host:port, and bail out.
* avrdude.1: Document the net:host:port connection option.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@635 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-08-31 20:52:47 +00:00
Joerg Wunsch 88e2614ee2 Submitted by Neil Davey:
patch #4539: Ability to control the bit clock (usleep) delay
for ppi interface
* bitbang.c: Implement bitbang_delay() and its calibration.
* bitbang.h: Declare bitbang_delay().
* main.c: Add the ispdelay option (-i).
* pgm.h (struct programmer_t): Add the ispdelay parameter.
* par.c: Add calls to bitbang_delay() when requested.
* serbb_posix.c: (Ditto.)
* serbb_win32.c: (Ditto.)
* avrdude.1: Document the new -i option.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@610 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-08-17 15:06:20 +00:00
Joerg Wunsch dbf083fb4d Implement STK500 (v2) HVSP mode.
* stk500v2.c: Add new functions for HVSP support.
* stk500v2.h: Add prototype for the stk500hvsp programmer.
* avrpart.h: Add fields to struct avrpart for new features.
* config_gram.y: Extend the configuration syntax for new
features required for HVSP support.
* lexer.l: (Ditto.)
* avrdude.conf.in: Add HVSP support for ATtiny13 and
ATtiny45 as an example.
* avrdude.1: Document stk500hvsp.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@595 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-07-21 21:53:49 +00:00
Joerg Wunsch c2c6e20613 Document the stk500pp support.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@593 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-07-19 21:34:34 +00:00
Joerg Wunsch b409c03049 Implement extended addressing needed for the ATmega256x devices.
Document ATmega256x support.  Also document Solaris port defaults
in avrdude.texi.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@584 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-05-25 14:38:08 +00:00
Joerg Wunsch d98636cfad Contributed by dcm@mit.edu: add support for the
AVRISP mkII device. (Savannah patch #4789.)
* serial.h: Declare usb_serdev_frame device descriptor.
* stk500v2.c: Implementation of the AVRISP mkII handling.
* usb_libusb.c: Add USB handling for short-frame delimited
AVRISP mkII USB protocol; add distinction of different
devices in usbdev_open().
* jtagmkII.c: Tell usbdev_open() to search for the JTAG ICE mkII.
* usbdevs.h: (New file.)
* Makefile.am: Add usbdevs.h, as well as some other forgotten
files "make distcheck" complained about.
* avrdude.conf.in: Add more aliases for the AVRISP mkII.
* avrdude.1: Document how to use the AVRISP mkII.
* doc/avrdude.texi: (Ditto.)


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@564 81a1dc3b-b13d-400b-aceb-764788c761c2
2006-01-12 23:13:50 +00:00
Joerg Wunsch 9000815867 Document the JTAG ICE mkI support.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@559 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-11-29 22:58:04 +00:00
Joerg Wunsch 505e320a1b Add support for the ATmega640/1280/1281 devices.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@535 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-10-09 09:29:24 +00:00
Joerg Wunsch 60dfba6575 Polish up the docs a bit. Use smallexample instead of example for
wide tty output.  Document a trick to find out about the serial
numbers of all JTAG ICEs attached to USB.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@534 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-27 08:25:18 +00:00
Joerg Wunsch 5c8f87e395 In lieu of Michael Holzt, add his serbb serial bit-bang code so it
will be available in the upcoming avrdude release.

His addition has been implemented by means of a generalized bit-bang
interface that contains the common part between serial and paralle
bit-bang devices, and specialed backends for the serial and parallel
port connections.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@515 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-18 20:12:23 +00:00
Joerg Wunsch d420c53c67 Merge the changes from avrdude.1 rev 1.47.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@505 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-17 19:12:20 +00:00
Joerg Wunsch 1f25185e9f avrdude.1: document the memtypes for -U
doc/avrdude.texi: (Ditto.)
Closes bug #13501: <memtype> should be listed in the man page


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@500 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-16 20:38:29 +00:00
Joerg Wunsch 8bf2adbed2 Make "jtag2" an alias for "jtag2fast", people will certainly love it
that way. ;-)  For those who want the 19200 Bd one, add "jtag2slow".


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@495 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-09-14 19:49:27 +00:00
Joerg Wunsch 8261a6acd7 Add support for the ATtiny25/45/85. Note that only the ATtiny45
appears to have a complete XML description right now.

Document all the recently added new devices: AT90PWM2/3,
ATmega164/324/644, ATmega329x/649x, ATtiny25/45/85.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@489 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-08-28 19:37:59 +00:00
Joerg Wunsch 975d7b786a Extend the butterfly code to fully support AVR109 boot loaders. Notable
changes to butterfly.c include:

. do not exit for unsupported devices but return -1 from the init function
  instead; that way the -F option can be used to continue anyway

. honor the -b option as arbitrary bootloaders could be implemented with
  any baud rate, not just the fixed 19200 Bd used by the butterfly

. implement functionality to read the fuse and lock bits, and write the
  (boot) lock bits, resp.

. fix the signature byte order

The remaining files document the new functionality.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@486 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-07-28 16:06:35 +00:00
Joerg Wunsch f5882fc781 Implement and document a libusb-based USB transport for the JTAG ICE
mkII.

The serial transport methods have been moved out into a record of
function pointers for that purpose, defaulting to the actual serial
connection that natively applies to the hosting system.  Iff inside
the JTAG ICE mkII handler a port name starting with "usb" has been
detected, the record of function pointers is switched to USB.
Optionally, a serial number might be specified, so only the JTAG ICE
mkII matching the given serial number will be opened.  The match is
done right-to-left, so only the least significant bytes of the serial
number need to be given.

In order to make the change as least intrusive to existing drivers as
possible, the entire naming scheme of the serial_foo() function entry
points has been maintained as access macros that encapsulate these
into the respective indirect function calls via serdev->foo().


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@478 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-06-19 21:38:03 +00:00
Joerg Wunsch e7df01c555 Document that the JTAG ICE mkII code currently cannot write to flash
one byte at a time.  Also mention the bug tracker interface on
savannah.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@471 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-19 04:49:46 +00:00
Joerg Wunsch d8dbc1e4d8 Umm, add the new programmer types to the texinfo documentation as well.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@465 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-14 08:06:18 +00:00
Joerg Wunsch 04831af970 Mega-commit to bring in both, the STK500v2 support from Erik
Walthinsen, as well as JTAG ICE mkII support (by me).

Erik's submission has been cleaned up a little bit, mostly to add his
name and the current year to the copyright of the new file, remove
trailing white space before importing the files, and fix the minor
syntax errors in his avrdude.conf.in additions (missing semicolons).

The JTAG ICE mkII support should be considered alpha to beta quality
at this point.  Few things are still to be done, like defering the
hfuse (OCDEN) tweaks until they are really required.  Also, for
reasons not yet known, the target MCU doesn't start to run after
signing off from the ICE, it needs a power-cycle first (at least on my
STK500).

Note that for the JTAG ICE, I did change a few things in the internal
API.  Notably I made the serial receive timeout configurable by the
backends via an exported variable (done in both the Posix and the
Win32 implementation), and I made the serial_recv() function return a
-1 instead of bailing out with exit(1) upon encountering a receive
timeout (currently only done in the Posix implementation).  Both
measures together allow me to receive a datastreem from the ICE at 115
kbps on a somewhat lossy PCI multi-UART card that occasionally drops a
character.  The JTAG ICE mkII protocol has enough of safety layers to
allow recovering from these events, but the previous code wasn't
prepared for any kind of recovery.  The Win32 change for this still
has to be done, and the traditional drivers need to be converted to
exit(1) upon encountering a timeout (as they're now getting a -1
returned they didn't see before in that case).


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@451 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-05-10 19:17:12 +00:00
Eric Weddington c8f18db55e Document new Safe Mode feature and switch.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@443 81a1dc3b-b13d-400b-aceb-764788c761c2
2005-01-24 21:26:14 +00:00
Jan-Hinnerk Reichert 80f996b49a stk500.c, term.c, doc/avrdude.texi, avrdude.1: added "sck"-command to the terminal mode. This command allows slowing down of the SCK of STK500-programmers.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@427 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-07-07 08:59:07 +00:00
Jan-Hinnerk Reichert 91d893eb52 avrdude.conf.in: Added support for tiny13 (contributed by Pawel Moll), mega48 and mega88 (contributed by Galen Seitz)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@418 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-06-22 17:38:54 +00:00
Jan-Hinnerk Reichert fa2dc82565 * avrdude.1, doc/avrdude.texi, doc/TODO: Removed the deprecated options from documentation
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@411 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-02-10 00:20:51 +00:00
Jan-Hinnerk Reichert 54e348832b * doc/avrdude.texi: get rid of those black boxes marking "overfull hbox"
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@401 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-17 19:38:15 +00:00
Jan-Hinnerk Reichert 93a976470c * doc/avrdude.texi: new appendix "Troubleshooting"
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@400 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-17 14:36:47 +00:00
Jan-Hinnerk Reichert 816ff2623e * avr910.c, pgm.c, pgm.h, config_gram.y, lexer.l: Add new configuration parameter baudrate to support avr910-programmers with non-standard baudrates
* avrdude.conf.in, doc/avrdude.texi: Added "baudrate" to documentation.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@398 81a1dc3b-b13d-400b-aceb-764788c761c2
2004-01-03 18:36:44 +00:00
Eric Weddington 4a9b06bbbd *doc/avrdude.texi: Update devices and programmers supported.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@392 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-12-01 19:42:25 +00:00
Eric Weddington b15d8ca2a2 *doc/avrdude.texi: Add missing -D option to user manual.
[This fixes bug #6804]


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@391 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-12-01 19:02:10 +00:00
Joerg Wunsch 9a00b545e3 Make the -U parser tolerate colons in filenames.
Document the change, including changing one of the texinfo examples
to use a Windows-like filename that contains a space (and thus
requires quoting).

This fixes bug #6764.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@386 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-11-26 22:05:02 +00:00
Eric Weddington 7d9cd56f1e * doc/avrdude.texi: Minor corrections. Change description of -P
to reference platform dependencies.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@370 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-09-18 18:11:25 +00:00
Brian S. Dean 181436e0b8 Add an extended example of using the -U option to update the flash,
eeprom, efuse, hfuse, and lfuse on a single command line.  Much of the
output had to be ommitted from the example since the texi commands for
formatting the example don't allow page breaks within the example.  If
someone knows a better way to format it, please feel free to do so.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@361 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-09-04 01:01:40 +00:00
Eric Weddington b47fd376fa * doc/avrdude.texi: Add note about privileges needed to load
the giveio driver for Windows.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@360 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-09-02 16:40:06 +00:00
Brian S. Dean 3ce217e65e Fix fuse bit setting example. This closes bug #4027 submitted by
(unknown).


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@350 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-08-28 14:00:07 +00:00
Brian S. Dean d7720e037b Fix example.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@345 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-08-24 20:53:25 +00:00
Brian S. Dean 882b0c8c05 Update a few programmer entries (descriptions only).
Add the supported programmer list to the manual.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@343 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-08-24 18:31:08 +00:00
Brian S. Dean d0506ab0f9 Remove debugging printf.
Update manual to reflect the new -U option.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@342 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-08-24 18:05:46 +00:00
Theodore A. Roth 7364032012 * avrdude.1: Document the -q option.
* doc/avrdude.texi: Document the -q option.
Fix some typos left over from pasting in man output.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@339 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-08-01 20:11:21 +00:00
Joerg Wunsch 4e704ad695 Add support for displaying and changing the various STK500 operational
parameters.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@336 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-07-24 21:26:28 +00:00
Theodore A. Roth 87aa0c0daa * configure.ac: Set version to 4.1.0.
* doc/avrdude.texi: Add note about avr910 programmer type.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@314 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-04-18 04:41:45 +00:00
Eric Weddington fc78f7c729 Add Install and Documentation sections for Windows. Fix typo.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@278 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-11 00:00:30 +00:00
Theodore A. Roth 32595b3b80 * doc/avrdude.texi: Add comment before each node to make them stand out better.
Use @option{} command for options instead of @code{}.
Merge FreeBSD and Linux platform dependent information.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@274 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-10 22:07:30 +00:00
Eric Weddington caf2297d94 Add notes about ability to list parts and list programmers in the config file in -p and -c descriptions. Change info about where to find Windows search method in -C description.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@270 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-06 21:46:20 +00:00
Eric Weddington 143e30d32c Minor Windows doc corrections.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@253 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-04 21:13:45 +00:00
Theodore A. Roth 05cb7dea0b * doc/avrdude.texi: Add node and menu information for the info system.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@246 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-03 02:03:49 +00:00
Theodore A. Roth e3e30d79a8 * Makefile.am (SUBDIRS): Add doc dir.
* configure.ac (AC_CONFIG_FILES): Add doc/Makefile.
* doc/Makefile.am: New file.
* doc/avrdude.texi: Use automatically generated version.texi.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@245 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-03 01:09:52 +00:00
Brian S. Dean 5de6b8e8c7 Initial manual.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@244 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-03-02 01:32:24 +00:00