Polish up the docs a bit. Use smallexample instead of example for
wide tty output. Document a trick to find out about the serial numbers of all JTAG ICEs attached to USB. git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@534 81a1dc3b-b13d-400b-aceb-764788c761c2
This commit is contained in:
Joerg Wunsch
parent
03ff61ab12
commit
60dfba6575
|
|
@ -1,3 +1,10 @@
|
|||
2005-09-27 Joerg Wunsch <j@uriah.heep.sax.de>
|
||||
|
||||
* doc/avrdude.texi: Polish up the docs a bit. Use smallexample
|
||||
instead of example for wide tty output. Document a trick to
|
||||
find out about the serial numbers of all JTAG ICEs attached
|
||||
to USB.
|
||||
|
||||
2005-09-26 Joerg Wunsch <j@uriah.heep.sax.de>
|
||||
|
||||
* jtagmkII.c (jtagmkII_paged_write): default the page size early so the
|
||||
|
|
|
|||
|
|
@ -28,7 +28,7 @@ This file documents the avrdude program.
|
|||
|
||||
For avrdude version @value{VERSION}, @value{UPDATED}.
|
||||
|
||||
Copyright @copyright{} 2003,2005 Brian Dean
|
||||
Copyright @copyright{} 2003, 2005 Brian Dean
|
||||
|
||||
Permission is granted to make and distribute verbatim copies of
|
||||
this manual provided the copyright notice and this permission notice
|
||||
|
|
@ -59,9 +59,9 @@ by the Free Software Foundation.
|
|||
@author by Brian S. Dean
|
||||
|
||||
@page
|
||||
@hfill (Send bugs and comments on AVRDUDE to @w{@email{avrdude-dev@@nongnu.org}}.)
|
||||
Send comments on AVRDUDE to @w{@email{avrdude-dev@@nongnu.org}}.
|
||||
|
||||
@vfill
|
||||
Use @uref{http://savannah.nongnu.org/bugs/?group=avrdude} to report bugs.
|
||||
|
||||
Copyright @copyright{} 2003,2005 Brian S. Dean
|
||||
@sp 2
|
||||
|
|
@ -94,6 +94,12 @@ This file documents the avrdude program for downloading/uploading
|
|||
programs to Atmel AVR microcontrollers.
|
||||
|
||||
For avrdude version @value{VERSION}, @value{UPDATED}.
|
||||
|
||||
Send comments on AVRDUDE to @w{@email{avrdude-dev@@nongnu.org}}.
|
||||
|
||||
Use @uref{http://savannah.nongnu.org/bugs/?group=avrdude} to report bugs.
|
||||
|
||||
Copyright @copyright{} 2003,2005 Brian S. Dean
|
||||
@end ifinfo
|
||||
|
||||
@menu
|
||||
|
|
@ -223,9 +229,9 @@ Roth.
|
|||
@noindent
|
||||
AVRDUDE is a command line tool, used as follows:
|
||||
|
||||
@example
|
||||
@smallexample
|
||||
avrdude -p partno @var{options} @dots{}
|
||||
@end example
|
||||
@end smallexample
|
||||
|
||||
@noindent
|
||||
Command line options are used to control AVRDUDE's behaviour. The
|
||||
|
|
@ -554,6 +560,8 @@ matched against the serial number read from any JTAG ICE mkII found on
|
|||
USB. The match is done after stripping any existing colons from the
|
||||
given serial number, and right-to-left, so only the least significant
|
||||
bytes from the serial number need to be given.
|
||||
For a trick how to find out the serial numbers of all JTAG ICEs
|
||||
attached to USB, see @ref{Example Command Line Invocations}.
|
||||
|
||||
@item -q
|
||||
Disable (or quell) output of the progress bar while reading or writing
|
||||
|
|
@ -699,7 +707,7 @@ should not be used.
|
|||
Download the file @code{diag.hex} to the ATmega128 chip using the
|
||||
STK500 programmer connected to the default serial port:
|
||||
|
||||
@example
|
||||
@smallexample
|
||||
@cartouche
|
||||
% avrdude -p m128 -c stk500 -e -U flash:w:diag.hex
|
||||
|
||||
|
|
@ -735,7 +743,7 @@ avrdude done. Thank you.
|
|||
|
||||
%
|
||||
@end cartouche
|
||||
@end example
|
||||
@end smallexample
|
||||
|
||||
@page
|
||||
@noindent
|
||||
|
|
@ -743,7 +751,7 @@ Upload the flash memory from the ATmega128 connected to the STK500
|
|||
programmer and save it in raw binary format in the file named
|
||||
@code{c:/diag flash.bin}:
|
||||
|
||||
@example
|
||||
@smallexample
|
||||
@cartouche
|
||||
% avrdude -p m128 -c stk500 -U flash:r:"c:/diag flash.bin":r
|
||||
|
||||
|
|
@ -764,7 +772,7 @@ avrdude done. Thank you.
|
|||
|
||||
%
|
||||
@end cartouche
|
||||
@end example
|
||||
@end smallexample
|
||||
|
||||
@page
|
||||
@noindent
|
||||
|
|
@ -772,7 +780,7 @@ Using the default programmer, download the file @code{diag.hex} to
|
|||
flash, @code{eeprom.hex} to EEPROM, and set the Extended, High, and Low
|
||||
fuse bytes to 0xff, 0x89, and 0x2e respectively:
|
||||
|
||||
@example
|
||||
@smallexample
|
||||
@cartouche
|
||||
|
||||
% avrdude -p m128 -u -U flash:w:diag.hex \
|
||||
|
|
@ -813,14 +821,14 @@ avrdude done. Thank you.
|
|||
|
||||
%
|
||||
@end cartouche
|
||||
@end example
|
||||
@end smallexample
|
||||
|
||||
@page
|
||||
@noindent
|
||||
Connect to the JTAG ICE mkII which serial number ends up in 1C37 via
|
||||
USB, and enter terminal mode:
|
||||
|
||||
@example
|
||||
@smallexample
|
||||
@cartouche
|
||||
|
||||
% avrdude -c jtag2 -p m649 -P usb:1c:37 -t
|
||||
|
|
@ -836,8 +844,27 @@ avrdude: Device signature = 0x1e9603
|
|||
avrdude done. Thank you.
|
||||
|
||||
@end cartouche
|
||||
@end example
|
||||
@end smallexample
|
||||
|
||||
@noindent
|
||||
List the serial numbers of all JTAG ICEs attached to USB. This is
|
||||
done by specifying an invalid serial number, and increasing the
|
||||
verbosity level.
|
||||
|
||||
@smallexample
|
||||
@cartouche
|
||||
|
||||
% avrdude -c jtag2 -p m128 -P usb:xx -v
|
||||
[...]
|
||||
Using Port : usb:xxx
|
||||
Using Programmer : jtag2
|
||||
avrdude: usbdev_open(): Found JTAG ICE, serno: 00A000001C6B
|
||||
avrdude: usbdev_open(): Found JTAG ICE, serno: 00A000001C3A
|
||||
avrdude: usbdev_open(): Found JTAG ICE, serno: 00A000001C30
|
||||
avrdude: usbdev_open(): did not find any (matching) USB device "usb:xxx"
|
||||
|
||||
@end cartouche
|
||||
@end smallexample
|
||||
|
||||
|
||||
@c
|
||||
|
|
@ -958,7 +985,7 @@ Display the current target supply voltage and JTAG bit clock rate/period.
|
|||
@noindent
|
||||
Display part parameters, modify eeprom cells, perform a chip erase:
|
||||
|
||||
@example
|
||||
@smallexample
|
||||
@cartouche
|
||||
% avrdude -p m128 -c stk500 -t
|
||||
|
||||
|
|
@ -1010,7 +1037,7 @@ avrdude> dump eeprom 0 16
|
|||
|
||||
avrdude>
|
||||
@end cartouche
|
||||
@end example
|
||||
@end smallexample
|
||||
|
||||
|
||||
@noindent
|
||||
|
|
@ -1020,7 +1047,7 @@ rising power). Note since we are working with fuse bits the -u (unsafe)
|
|||
option is specified, which allows you to modify the fuse bits. First
|
||||
display the factory defaults, then reprogram:
|
||||
|
||||
@example
|
||||
@smallexample
|
||||
@cartouche
|
||||
% avrdude -p m128 -u -c stk500 -t
|
||||
|
||||
|
|
@ -1050,7 +1077,7 @@ avrdude> w lfuse 0 0x2f
|
|||
|
||||
avrdude>
|
||||
@end cartouche
|
||||
@end example
|
||||
@end smallexample
|
||||
|
||||
|
||||
@c
|
||||
|
|
@ -1119,7 +1146,7 @@ option.
|
|||
@noindent
|
||||
The format of the programmer definition is as follows:
|
||||
|
||||
@example
|
||||
@smallexample
|
||||
programmer
|
||||
id = <id1> [, <id2> [, <id3>] ...] ; # <idN> are quoted strings
|
||||
desc = <description> ; # quoted string
|
||||
|
|
@ -1135,7 +1162,7 @@ programmer
|
|||
pgmled = <num> ; # pin number
|
||||
vfyled = <num> ; # pin number
|
||||
;
|
||||
@end example
|
||||
@end smallexample
|
||||
|
||||
|
||||
@c
|
||||
|
|
@ -1144,7 +1171,7 @@ programmer
|
|||
@node Part Definitions, Other Notes, Programmer Definitions, Configuration File
|
||||
@section Part Definitions
|
||||
|
||||
@example
|
||||
@smallexample
|
||||
part
|
||||
id = <id> ; # quoted string
|
||||
desc = <description> ; # quoted string
|
||||
|
|
@ -1177,7 +1204,7 @@ part
|
|||
writepage = <instruction format> ;
|
||||
;
|
||||
;
|
||||
@end example
|
||||
@end smallexample
|
||||
|
||||
@menu
|
||||
* Instruction Format::
|
||||
|
|
@ -1226,7 +1253,7 @@ specification closely follows the instruction data provided in Atmel's
|
|||
data sheets for their parts. For example, the EEPROM read and write
|
||||
instruction for an AT90S2313 AVR part could be encoded as:
|
||||
|
||||
@example
|
||||
@smallexample
|
||||
|
||||
read = "1 0 1 0 0 0 0 0 x x x x x x x x",
|
||||
"x a6 a5 a4 a3 a2 a1 a0 o o o o o o o o";
|
||||
|
|
@ -1234,7 +1261,7 @@ read = "1 0 1 0 0 0 0 0 x x x x x x x x",
|
|||
write = "1 1 0 0 0 0 0 0 x x x x x x x x",
|
||||
"x a6 a5 a4 a3 a2 a1 a0 i i i i i i i i";
|
||||
|
||||
@end example
|
||||
@end smallexample
|
||||
|
||||
|
||||
|
||||
|
|
@ -1750,6 +1777,7 @@ line driven and for writing the batch files.
|
|||
|
||||
@noindent
|
||||
In general, please report any bugs encountered via
|
||||
@*
|
||||
@url{http://savannah.nongnu.org/bugs/?group=avrdude}.
|
||||
|
||||
|
||||
|
|
@ -1791,16 +1819,6 @@ Problem: I'm not using linux and my AVR910 programmer is really slow.
|
|||
Solutions: The reasons for this are the same as above.
|
||||
If you know how to work around this on your OS, please let us know.
|
||||
|
||||
@item
|
||||
Problem: I cannot modify the fuse bits on my AVR!
|
||||
|
||||
Solution: You probably forgot to specify the -u option, which allows you to modify fuse bits.
|
||||
This is done to prevent corrupt data from changing the fuse bits without you knowing about it, and
|
||||
currently also prevents the user from changing the fuse bits by accident. This patch was added in
|
||||
response to a number of occasions when an AVR had stopped responding because the fuse bits got changed
|
||||
by an error caused by the programmer. Programmer of course meaning both the physical device, and the
|
||||
person sitting at the keyboard.
|
||||
|
||||
@item
|
||||
Problem: AVRDUDE says my device is not supported when using the AVR109 boot loader
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue