Commit Graph

1091 Commits

Author SHA1 Message Date
hweisbach a29fc23148 Adds initial avrftdi TPI support.
Device identification is possible tested under OS X 10.6.8 with an
FT4232H and ATtiny10.

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1145 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-05-02 11:06:15 +00:00
hweisbach 57b5e76065 avrftdi.c: rename constant ERROR to ERR
ERROR is already defined as a preprocessor macro in wingdi.h.

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1144 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-04-28 19:35:36 +00:00
hweisbach fc709f2a84 Rework of textual output of avrftdi.
Messages are divided by severity and printed accordingly to verbosity, as
specified by the user. The provided severity level are (ERROR, WARN, INFO,
DEBUG, TRACE). Where "ERROR" messages are always printed. Shortcut-macros
including function, from which the output was generated, and line number were
also added. Some log messages were updated and other code warnings removed.

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1143 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-04-28 19:35:26 +00:00
hweisbach a6f4aac8b1 Fixes bugs #38659 and #38831
Apparently, doing too large read/write I/O on the MPSSE fills up the RX Buffer
of the chip, resulting in STALL/NAK of additional transactions of an OUT request.
Since the OUT request is issued synchronously, an appropriate IN request cannot
be issued, resulting in a deadlock.
This problem is handled by submitting small enough OUT requests, that will not
fill up the RX buffer and interleaving them with IN requests.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1142 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-04-27 21:49:27 +00:00
hweisbach 2a3ecd0672 Updates avrftdi to use libftdi1
This includes adding libftdi1 to configure.ac and Makefile.am.
avrftdi code is changed to use libftdi1. At the same time device
discovery is moved to libftdi1. Some error and debug messages in
avrftdi are corrected and/or updated. avrftdi_print is updated,
to print all messages whose verbosity level is less or equal to
the global verbosity level, so that messages with level 0 are always
printed.
This change is tested on OS X 10.6.8, Ubuntu 12.04.2 and Win7 x86_64.
The Win7 version was cross-compiled on OS X 10.6.8.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1141 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-04-27 20:52:01 +00:00
joerg_wunsch 31618cb6df Replaces the old AM_CONFIG_HEADER by AC_CONFIG_HEADERS; automake 1.13+
barfs.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1140 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-04-25 20:14:44 +00:00
joerg_wunsch 9ad7888bc0 Add new devices: ATmega2564RFR2, ATmega1284RFR2, ATmega644RFR2
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1139 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-03-12 10:07:56 +00:00
rliebscher a8c3a0973a patch #7724 Add TPI support for Bus Pirate using bitbang mode
* buspirate.[ch]: added support for BusPirate Bitbanging
	* avrdude.conf.in: added entry for buspirate_bb
	* pgm_type.c: added entry for buspirate_bb


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1138 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-01-30 21:15:39 +00:00
rliebscher 825c570746 patch #7936 Patch to support BusPirate AVR Extended Commands mode
* buspirate.c: added support for BusPirate AVR Extended Commands mode
	* avrdude.1: added doc for nopagedread parameter
	* doc/avrdude.texi: added doc for nopagedread parameter


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1137 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-01-30 18:56:31 +00:00
rliebscher f33873b1ba patch #7723 Bus Pirate “raw-wire” mode which can run down to 5 kHz
* buspirate.c: added raw wire mode
	* avrdude.1: added doc for rawfreq parameter
	* doc/avrdude.texi: added doc for rawfreq parameter

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1136 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-01-30 17:58:48 +00:00
rliebscher a4dbfc95fa bug #37977 Support for Openmoko Debug Board
* avrdude.conf.in: added openmoko entry

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1135 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-01-30 16:46:31 +00:00
rliebscher 707e6634c1 patch #7932 Read USBtiny VID and PID from avrdude.conf if provided.
* avrdude.conf.in: added usbpid, usbvid to usbtiny
	* usbtiny.[ch]: use usbpid, usbpid if provided in config file

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1134 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-01-29 18:33:34 +00:00
joerg_wunsch c65baa766a bug #38172: avrftdi: Incorrect information in avrdude.conf
* avrdude.conf.in (avrftdi): fix comments about ACBUS vs. ADBUS;
add a comment that the MPSSE signals are fixed by the FTDI
hardware and cannot be changed



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1133 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-01-26 20:08:40 +00:00
rliebscher 8d6f310736 patch #7165 Add support for bitbanging GPIO lines using the Linux sysf GPIO interface
* doc/avrdude.texi,avrdude.1: added doc for linuxgpio 
	* avrdude.conf.in: added template for linuxgpio programmer
	* config_gram.y: pin numbers restricted to [PIN_MIN, PIN_MAX]
	* pindefs.h: added PIN_MIN, PIN_MAX, removed unused LED_ON/OFF
	* configure.ac: configure option enable-linuxgpio, print of enabled options
	* linuxgpio.[ch]: new source for linuxgpio programmer
	* Makefile.am: added linuxgpio to sources list
	* pgm_type.c: added linuxgpio to programmer types list

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1132 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-01-09 19:23:30 +00:00
joerg_wunsch 1b8fc9897d Replace some stray calls to putchar() by putc(..., stderr).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1131 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-01-08 21:02:01 +00:00
joerg_wunsch 17cc9e7d05 Fix a minor typo.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1130 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-01-02 20:31:13 +00:00
joerg_wunsch ac8b2858ad * usb_libusb.c (usbdev_open): Downgrade the max transfer size for
the main data endpoints when being forced so by the USB; this can
happen when attaching the JTAGICE3 to a USB 1.1 connection
* jtag3.c (jtag3_initialize): When detecting a downgraded max
transfer size on the JTAGICE3 (presumably, due to being connected
to USB 1.1 only), bail out as its firmware cannot properly handle
this (by now)



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1129 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-01-02 10:16:37 +00:00
joerg_wunsch ef0ee7525f Annual ChangeLog rotation time.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1128 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-01-02 10:13:26 +00:00
joerg_wunsch 3cb37fffbe Annual ChangeLog rotation time.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1127 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-01-02 10:12:41 +00:00
joerg_wunsch 076e03472f * usbdefs.h (USBDEV_BULK_EP_WRITE_STK600)
(USBDEV_BULK_EP_READ_STK600): new define values
* stk500v2.c (stk600_open): use the STK600 EP values,
as they are different from AVRISPmkII



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1126 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-12-18 10:45:23 +00:00
joerg_wunsch 9dc65f6008 bug #37942: Latest SVN can't program in dragon_jtag mode
* jtagmkII.c (jtagmkII_initialize): For Xmega devices, and
firmware >= 7.x, don't trigger a RESET, in order to work around a
firmware bug that appears to be present in at least firmware 7.24
for the Dragon.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1125 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-12-18 09:20:06 +00:00
joerg_wunsch 05fd0beac1 * config_gram.y: Implement the "ocdrev" keyword
* avrpart.c: (Dito)
* avrpart.h: (Dito)
* lexer.l: (Dito)
* avrdude.conf.in: Add "ocdrev" key/value pairs, based
on the AS6 XML file information.
* jtag3.c: Use the ocdrev in the parameter block.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1124 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-12-04 13:59:37 +00:00
joerg_wunsch 1f7b134420 * jtag3.c: Make jtag3_command() public
* jtag3.h: (Dito.)
* jtag3_private.h: Add two new commands
* stk500v2.c: Implement the "MonCon disable" hack that
allows temporarily falling back to ISP when trying to
talk to a part that has debugWIRE enabled



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1123 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-12-03 21:03:06 +00:00
rliebscher 7f9f0633cd * pickit2.c: reordered #includes for non-usb configuration
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1122 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-12-03 20:50:11 +00:00
joerg_wunsch 3024312901 Enable interactive adjustment of the various
clock frequencies (JTAG Xmega, JTAG megaAVR, PDI Xmega)
through the set_sck_period() callback.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1121 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-12-03 16:52:23 +00:00
joerg_wunsch 707ddd2de9 Remove unused code that was left over from
cloning the jtagmkII.c implementation



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1120 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-12-03 16:09:34 +00:00
joerg_wunsch 97357595b6 * pgm_type.c: Add "jtagice3_isp" programmer hook
* avrdude.conf.in: Add "jtag3isp" programmer
* jtag3.c: jtag3_setparm() is now public
* jtag3.h: (Dito)
* stk500v2_private.h: Command 0x1D is CMD_SPI_MULTI only
for STK500v2, AVRISPmkII, and JTAGICEmkII; for JTAGICE3,
it's CMD_SET_SCK now; also add CMD_GET_SCK
* avrpart.c (avr_get_output_index): New function
* avrpart.h: (Dito)
* stk500v2.c: Implement the pasthrough programmer glue logic
for JTAGICE3 in ISP mode
* stk500v2.h: (Dito)
* avrdude.1: Document the JTAGICE3 support.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1119 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-12-03 15:52:38 +00:00
joerg_wunsch de55b22e86 Add a failure code for debugWIRE communication failures I
happened to run into.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1118 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-30 22:18:34 +00:00
joerg_wunsch 4e0801803f * jtag3.c (jtag3_read_byte, jtag3_write_byte): Remove the
m->offset from addr, JTAGICE3 doesn't need it anymore (similar
to JTAGICEmkII with 7+ firmware)
* jtag3.c (jtag3_read_byte): Allow for full-page reads of
EEPROM also for Xmega and debugWIRE, allow for signature
read in debugWIRE




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1117 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-30 12:51:07 +00:00
joerg_wunsch d8ad0fdb28 * jtag3_private.h: Add two more error detail codes I stumbled
across during development
* jtag3.c: (Dito.)
* usb_libusb.c: Reduce timeouts from 100 to 10 s, still long
enough, but not getting cold feet when something goes wrong.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1116 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-30 12:36:00 +00:00
joerg_wunsch fa86937e91 * jtag3.c: Handle events returned by the ICE
* usbdevs.h: Add defines that mark an event in return
from usb_recv_frame().
* usb_libusb.c: (Dito.)



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1115 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-29 21:43:54 +00:00
joerg_wunsch fca08c90ab Implement page erase functionality.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1114 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-29 16:20:48 +00:00
joerg_wunsch 180c000565 * avrdude.conf.in: Remove "has_jtag" from Xmega A4 and D4
devices, as they only have PDI.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1113 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-29 14:23:18 +00:00
joerg_wunsch a1349681e1 bug #37265: wrong page sizes for XMega64xx in avrdude.conf
* avrdude.conf.in: Fix page sizes for all Xmega devices,
by cross-checking against Atmel Studio's device XML files




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1112 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-29 14:12:41 +00:00
joerg_wunsch 8d9a00ddc5 * jtag3.c: Fill in the missing pieces for Xmega support (both,
PDI and JTAG).
* jtagmkII.c (jtagmkII_set_xmega_params): Use "fuse1" rather
than "fuse0" memory space to fill in the NVM offset from, as
there is no "fuse0" on some Xmega devices.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1111 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-29 13:31:11 +00:00
joerg_wunsch 66b46eb591 Add device support for the recently released ATmega*RFR2 family.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1110 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-29 09:32:27 +00:00
joerg_wunsch ed3033e396 First support for Atmel JTAGICE3. Guessed from USB sniffer
traces made by Knut Schwichtenberg, and by similarity to
JTAGICEmkII.

Still quite incomplete, just megaAVR/JTAG is done by now.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1109 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-28 22:39:01 +00:00
joerg_wunsch 3fabed6ea5 Change all the USB details (endpoint numbers, max transfer size etc.)
to a per-programmer adjustable value.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1108 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-26 16:24:56 +00:00
joerg_wunsch 8fdf4d4071 Replace outdated FSF postal address by a reference to
the GPL info on their website.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1107 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-20 14:03:50 +00:00
rliebscher 52e3323b6e bug #35186 inverting pins with "~" doesn't work for pin lists (i.e. vcc)
bug #37727 Add support for LM3S811 dev board as a programmer
* lexer.l,config_gram.y: accepting inverted pins at pin lists 
	        syntax: ~num or ~(num,num,...)
* par.c: par_set_many_bits is now usable with inverted pins
* avrftdi.c: fixed wrong index in ftdi_pin_name
* avrdude.conf.in: added programmer lm3s811

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1106 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-13 21:34:02 +00:00
rliebscher 8af36ef451 * lexer.l,config_gram.y,config.[hc]: changed reading of numbers to integers except of default_bitclock which is the only real number.
No signs are allowed as negative values do not make sense for current config values.
* buspirate.c: include own header file buspirate.h
* doc/.cvsignore: add programmers.texi to ignore list

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1105 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-04 17:18:59 +00:00
joerg_wunsch c03387fcb1 Add EXTRA_DIST, replace $(srcdir) by
$(builddir) for generated files, so "make distcheck"
works again.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1104 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-09-06 15:33:09 +00:00
rliebscher 3e93f3d037 fixed doc/Makefile.am for use with BSD make
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1103 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-09-05 20:52:40 +00:00
rliebscher ae88486420 patch #7184 Support for PICKit2 programmer
* Makefile.am: add pickit2 files
	* pickit2.[ch]: new programmer implementation
	* pgm_type.c: add pickit to list
	* avrdude.1: documentation for pickit2
	* doc/avrdude.texi: documentation for pickit2
	* avrdude.conf.in: add pickit2 programmer entry

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1102 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-08-15 18:34:53 +00:00
rliebscher 911791686c bug #30559 Ft232 bit-bang support, see comment #30
* ft245r.c: added semaphore workaround for MacOS X,
	            added pthread_testcancel in reader thread

* configure.ac: added check for TYPE_232H in libftdi (not in libftdi < 0.20)
* avrftdi.c: do not use TYPE_232H if not declared

git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1101 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-08-15 17:31:11 +00:00
hweisbach 787a623715 Fixes 'label at end of compound statement' error introdcued in r1099
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1100 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-08-13 19:31:38 +00:00
hweisbach 7a9f682332 Fixes pin_limit error in avrftdic.
-Error was a result of a mixup between 2232C/D and 2232H


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1099 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-08-13 19:03:41 +00:00
hweisbach 086b4c329e Adds bugfixes and maintenance for avrftdi
Bugfixes:
-remove ftdi_usb_purge_buffers(), since it does not flush, but clear buffers
-fix bad polling in avrftdi_flash_write() where it was possible to poll a 0xff
 value. 

Maintenance:
-use #defines from libftdi for MPSSE commands where applicable
-reformat E() and E_VOID() macros
-remove TYPE_* macros
-clean up private structure (remove pin_inversion, type and ftype)
-adds ftdi_pin_name() to turn a (FTDI) pin number to a human readable string
-adds avrftdi_print to encapsulate "if(verbose > c) fprintf()"-idiom
-nicer / better understandable (I hope) output
-removes pin_limit() and adds a member in the private data structure.
 TYPE_* macros can be removed; decision is made from (struct ftdi_context).type
-add_pin(s)() functions reworked. parameters are validated first, if everything 
 is alright, pin_value is modified. pin_inversion mask is not needed; use
 PIN_INVERTED instead
-change set_pin(s)(), so that it gets the pin value used by avrdude (and not a
 bit mask). This way, PIN_INVERTED is usable and pin_inversion is not needed.
 Plus, the interface is consistent with the add_pin() signature. Also move
 parameter validation to the start of the function. I also commented out the
 warning, that a pin is not defined, because it is annoying.
-clean up avrftdi_open(): first parameter validation, then USB lookup, interface
 initialization then pin setup
-avrftdi_eeprom_read/write() and avrftdi_flash_read/write(): convert to new
 calling scheme, where every paged_* function is called once for every page



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1098 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-07-29 12:29:39 +00:00
hweisbach 08639363fa Adds ChangeLog entry for Rev 1095
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1097 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-07-25 16:36:17 +00:00
joerg_wunsch 60efc31839 Return MTYPE_FLASH from jtagmkII_memtype() rather than
MTYPE_SPM for non-Xmega flash regions.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1096 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-07-25 14:56:39 +00:00