a73567893b
Properly handle negative number sizes
2022-02-21 13:43:38 +01:00
fa706f0d01
Handle data size warning better
...
Now it only outputs a warning when the size of the data the user input is actually ambiguous
2022-02-20 23:03:31 +01:00
3532c567ac
Add suffix for 8-bit data
...
use [val]HH or [val]hh to force 8-bit writes to memory
2022-02-20 22:23:15 +01:00
bb99a36a14
Formatting
...
Use enums for write mode, and change datatypes from int/long/char to int32_t/uint8_t where possible
2022-02-20 19:08:30 +01:00
a9b756e5c7
Add struct initialization list
2022-02-20 12:46:53 +01:00
cf67a76c23
Merge branch 'main' into ser_posix_cleanup
2022-02-20 12:37:19 +01:00
0e29b43bd0
Add support for 64-bit integers
...
Also, move everything data related into a struct, to keep tings a little more organized
2022-02-19 23:34:50 +01:00
4b9219edee
Add support for suffixes for manually specifying data size
...
H/h/S/s: 16-bit, L/l: 32-bit, F/f: 32-bit float
2022-02-19 22:48:58 +01:00
3efd3b2052
Merge pull request #873 from MCUdude/add-arduino-programmers
...
Add missing USBtiny derived programmers
2022-02-19 21:51:31 +01:00
75ab3c418e
Fixed warning with unsigned char
2022-02-19 21:18:03 +01:00
62f3b84eee
Use union for simpler data representation
...
It is a bit hacky, but for this purpose it fits surprisingly well
2022-02-19 20:15:52 +01:00
066f54fbfa
Cleanup of POSIX serial init code
2022-02-19 18:00:58 +01:00
de19f203e0
Smallest possible fix for PL2303HX
2022-02-19 15:07:32 +01:00
d054c68b19
Merge pull request #878 from MCUdude/fix-pkob-target-voltage
...
Fix Curiosity Nano target voltage
2022-02-18 23:01:49 +01:00
c2fe68ef7d
Merge pull request #877 from MCUdude/jtag3-verbosity
...
Reduce jtag3 output verbosity
2022-02-18 22:38:40 +01:00
c345985928
Merge branch 'avrdudes:main' into terminal-write
2022-02-18 22:09:42 +01:00
c1ec836fbd
PR #882 done
2022-02-18 21:37:27 +01:00
59ecd4cc65
Remove libhid support in ser_avrdoper.c in favor of libhidapi
2022-02-18 20:05:52 +01:00
e31be88ce0
Add LIB_LIBHID to CMake project to fix MinGW build issue
2022-02-18 19:58:13 +01:00
6e7f38e81f
Properly handle negative numbers
...
Now -3.141592 and -32768 are valid numbers that's stored correctly in memory
2022-02-18 09:58:16 +01:00
10e05eed21
Require single quotes when writing characters
2022-02-18 09:58:16 +01:00
551046052e
Add support for writing floats
2022-02-18 09:58:16 +01:00
2a92b8cce4
Add support for memory "fill" with arbitrary data too
...
If you run the following command: $ write eeprom 0x00 0x10 A B C ...
It will write the following data to EEPROM:
|ABCCCCCCCCCCCCCC|
starting from address 0x00
2022-02-18 09:58:16 +01:00
c007dc7d24
Add support for writing single characters
...
Now this is possible: write eeprom 0x00 a b c d e f 0x80 0x90 ! H E L L O
2022-02-18 09:58:16 +01:00
2589b17640
Add support for memory "fill" mode
...
Syntax: write <memtype> <start addr> <no. byte to write> <byte to write> ...
2022-02-18 09:58:13 +01:00
19e2cae053
Add Curiosity Nano to terminal list
2022-02-14 10:30:21 +01:00
932f68f24c
Set target voltage even thoug not target is detected
2022-02-14 10:28:54 +01:00
b1d34a510c
Reduce jtag3 output verbosity
2022-02-13 19:23:48 +01:00
f2bdcbe977
Add missing USBtiny derived programmers
...
ArduinoISP and the Arduino.org ISP are commercial versions of the USBtiny programmer with different USB VIDs/PIDs
2022-02-11 22:46:11 +01:00
76a17be4d0
Merge pull request #872 from MCUdude/jtag-string-formatting
...
Tweak programmer info formatting strings
2022-02-11 22:16:39 +01:00
80f1d96e07
Tweak programmer info formatting strings
...
Now all colons are on a straight line, just like #853 did to all jtag3 compatible programmers
2022-02-11 22:10:52 +01:00
f2c73c2bb8
Merge pull request #853 from MCUdude/jtag3-clock-update
...
Print JTAG3 clocks after configuration + string formatting
2022-02-11 21:44:54 +01:00
b581d14823
String formatting
...
Allign colons, only print clocks that are actually present (>0 kHz)
2022-02-11 21:35:07 +01:00
3fc39c47ad
Print memory name alias together with the canonical name if present
...
in avrdude.conf. An example would be "avrdude: reading fuse0/wdtcfg memory:"
2022-02-11 21:10:05 +01:00
d6ccf7a3ff
Add memory alias names for megaAVR0/tinyAVR0,1,2/AVR-Dx/AVR-Ex fuses
2022-02-10 22:34:33 +01:00
452f673f38
Back out the last "alias" commit (search for existing alias).
...
It breaks the alias handling completely as the search happens
way too late. So instead, just keep any possibly duplicate
name as it won't be in our way anyway.
2022-02-10 21:26:05 +01:00
d134dc8fff
Alias keyword ( #868 )
...
Implementation for an "alias" keyword.
By now, only applied inside memory descriptions.
* Make "mem_alias" a separate nonterminal.
The previous implementation attempt caused a syntax error in
yacc code, and separating mem_alias on the same level as
mem_spec appears to be the cleaner solution anyway.
* Maintain real memory aliases.
Instead of duplicating the aliased memory with a new name, maintain a
second list of memory aliases (per device) that contains a pointer to
the memory area it is aliased to. That way, a memory name can be
clearly distinguished between the canonical one and any aliases.
* Check p->mem_alias != NULL before touching it
* Add avr_find_memalias()
This takes a memory region as input, and searches whether an
alias can be found for it.
* We need to add a list structure for the mem_alias list, always.
By that means, mem_alias won't ever be NULL, so no need to check
later.
Also, in avr_dup_part(), duplicate the alias list.
* In a memory alias, actually remember the current name.
* In avr_dup_part(), adjust pointers of aliased memories
While walking the list of memories, for each entry, see if there is an
alias pointing to it. If so, allocate a duplicated one, and fix its
aliased_mem pointer to point to the duplicated memory region instead
of the original one.
* Add avr_locate_mem_noalias()
When looking whether any memory region has already been defined for
the current part while parsing the config file, only non-aliased names
must be considered. Otherwise, a newly defined alias would kick out
the memory definition it is being aliased to.
* When defining a mem_alias, drop any existing one of that name.
* Actually use avr_find_memalias() to find aliases
* Add declaration for avr_find_memalias()
* When defining a memory, also search for an existing alias
If the newly defined name has the same as an existing alias, the alias
can be removed.
Note that we do explicitly *not* remove any memory by the same name of
a later defined alias, as this might invalidate another alias'es
pointer. If someone defines that, the alias name just won't ever be
found by avr_locate_mem().
2022-02-10 20:39:19 +01:00
ba314f23e9
Merge pull request #863 from MCUdude/jtag3-read-memory-alias
...
Add support for reading from more memory sections
2022-02-10 20:35:06 +01:00
a43f220ef9
Add support for reading from more memory sections
...
It's now possible to read the following memories if present: osccal16, osccal20, tempsense, osc16err, osc20err
2022-02-07 21:51:35 +01:00
b6a6c681df
Merge pull request #859 from dl8dtl/safemode-removal
...
Remove the "safemode" feature.
2022-02-05 22:03:12 +01:00
625027a807
Add HV UPDI pulse command
2022-02-05 14:44:13 +01:00
8c6c6a14ec
Remove the "safemode" feature.
...
This feature has been designed with the sometimes quite flakey direct
(parallel or serial port attached) bitbang programming adapters in
mind that were quite common about two decades ago.
With parallel ports vanishing from modern PCs almost completely, and
the advent of various USB-attached low-cost programming devices,
this class of programmers disappeared almost completely.
Furthermore, the fuse combinations that were covered by the feature
are no longer around on all recent AVR devices, so for an ever
increasing number of devices, safemode already became meaningless and
was turned off anyway.
With the prospective version 7.x release, it's a good point in time to
introduce a major change like this one.
2022-01-31 20:44:32 +01:00
7ed3632902
CMake: use CMAKE_CURRENT_BINARY_DIR to locate avrdude.conf
...
With the split CMakeLists.txt infrastructure avrdude.conf
will be created in the build/src and not build folder. Hence,
fix its location in the install command.
2022-01-31 07:18:59 +01:00
e0bc6a8bd6
Merge pull request #855 from MCUdude/fix-arduino-retry-attempts
...
Fix Arduino retry attempts
2022-01-30 10:45:24 +01:00
b84e6862a7
Assign proper type to msg[] in errstr()
...
Obviously, the array ought to be of type char.
Closes Issue #856
2022-01-29 23:32:39 +01:00
7144a9f2ae
Replace incorrect warning message
...
Was mistakenly added in PR #854 .
2022-01-29 20:08:43 +01:00
28be45d8b6
Fix Ardino sync attempts
...
In order for the Arduino bootloader to re-sync with Avrdude, the microcontroller needs to be reset to start the bootloader again.
2022-01-29 19:53:42 +01:00
4ea4ff7fba
Merge pull request #850 from dl8dtl/usbasp-errstr
...
Fix libusb-1.0 error strings
2022-01-27 23:18:51 +01:00
7e7c4e630e
Merge pull request #854 from MCUdude/arduino-stk500
...
Set number of connection retry attempts for Arduino/STK500 programmer
2022-01-27 23:17:28 +01:00
39deb3a600
Merge pull request #852 from yegorich/cmake-split
...
CMake: split configuration in two files
2022-01-27 23:16:37 +01:00
dd8c3ff830
Merge pull request #843 from mariusgreuel/pr-ftdi-syncbb
...
Fix receive buffer implementation in ftdi_syncbb programmer
2022-01-27 23:15:10 +01:00
ad6eff0f76
Set number of Arduino/STK500 connection retry attempts
...
Using the extended parameter flag -x. Usage: . Default number of attempts is still 10 if not -x flag is specified
2022-01-25 09:40:24 +01:00
286c0f5e2a
Don't print irrelevant information for the Arduino programmer
2022-01-24 22:16:31 +01:00
f6bbaadfa6
Print clock info after the correct clock speeds has been set
...
The "new" clock speed set by the -B flag wasn't reflected in the output log
2022-01-23 22:45:54 +01:00
acee6afa4e
CMake: split configuration in two files
...
The main CMakeLists.txt file in the project's root directory takes
care of the main project settings like project name and version,
handling the options, finding dependencies, etc.
The src/CMakeLists.txt handles options that are necessary to build
libavrdude library and avrdude binary.
2022-01-23 21:22:07 +01:00
42a154dddf
Fix libusb-1.0 error strings
...
Previously, all libusb-1.0 error strings have been translated
by libusb_to_errno() into an errno-like integer, only in order
to pass that one straight into strerror().
For unhandled libusb-1.0 error codes, ERANGE was returned, which
is just nonsense ("Result too large", bug #848 ).
Instead, use a single function errstr() now that either can
use strerror() on some well-defined errno-like code, or otherwise
just return a string that mentions the numeric value.
2022-01-21 23:13:56 +01:00
37b0659951
PR #816 merged
...
Copy over man page additions into texinfo file as well.
2022-01-21 21:56:07 +01:00
cce7a934d6
Merge pull request #815 from MCUdude/add-memory-sections
...
Add more memory sections to read from
2022-01-21 21:49:29 +01:00
490558049e
Merge pull request #816 from andrewshadura/usbtiny-spi
...
Add SPI support to USBtiny
2022-01-21 21:40:00 +01:00
512cce405c
Merge pull request #829 from yegorich/cmake-install-liavrdude
...
CMake: add initial support for installing lib and include files
2022-01-21 21:37:21 +01:00
d401b2224e
Merge branch 'main' into jtagmkii-retry-attempts
2022-01-21 13:28:20 +01:00
b1cbbfc9f0
Reduce verbosity when setting fuses and uploading programs
...
Affects commands with no -v flag and one -v flag
2022-01-20 09:45:34 +01:00
dbac0ecf8c
Reduce the number of attempts to 10
...
+ print number of attempts
2022-01-19 23:25:47 +01:00
8be18c788e
CMake: add initial support for installing lib and include files
2022-01-18 14:54:42 +01:00
44b0c0715f
Fix receive buffer implementation in ftdi_syncbb programmer
2022-01-17 22:53:58 +01:00
7b9f258806
Add a new programmer 'ft232h', similar to ft232r. Improve and correct pinout documentation for um232h and c232hm programmer.
2022-01-17 22:49:03 +01:00
0e451f73cf
Print alias names if present
2022-01-17 21:34:09 +01:00
54d143d4a5
Merge pull request #836 from MCUdude/add-missing-targets
...
Add missing tinyAVR-2, AVR DD and AVR EA targets
2022-01-16 22:59:41 +01:00
4453d54296
Add memory name aliases for AVR DA/DB
...
+ add sernum and tempsense memory sections to read from
2022-01-15 21:53:58 +01:00
9c08c0c164
Attempt to fix incorrect readsize values
...
Values copied AVR64DD__.atdf and AVR64EA__.atdf. The order atdf files doesn't exist at the moment
2022-01-15 12:47:58 +01:00
628c48aff6
Add AVR EA targets
...
This includes AVR8EA28/32, AVR16EA28/32/48, AVR32EA28/32/48 and AVR64EA28/32/64
2022-01-14 20:30:49 +01:00
8e47768600
Add AVR DD targets
...
This includes AVR16DD14/20/28/32, AVR32DD14/20/28/32 and AVR64DD14/20/28/32
2022-01-14 19:52:22 +01:00
b99687f33c
Merge pull request #811 from dbuchwald/main
...
Added missing RTS/DTR management feature to serialupdi programmer
2022-01-14 08:24:58 +01:00
153031d6d6
Copy over description of extended parameters to avrdude.1
2022-01-14 08:18:56 +01:00
310fe49b73
Add missing tinyAVR-2 series targets
...
Includes ATtiny3224, ATtiny3226 and ATtiny3227
2022-01-13 22:29:22 +01:00
77a5703c5c
Merge pull request #832 from MCUdude/add-even-more-missing-targets
...
Add missing ATmega and ATtiny targets
2022-01-13 21:26:43 +01:00
822578cffd
Mention PR #809
...
Also fix signatures for ATmega169A, ATmega165 and ATmega165A.
2022-01-13 20:08:40 +01:00
d1634e4d96
Merge pull request #809 from MCUdude/add-missing-atmega-targets
...
Add missing ATmega__5 and ATmega__9 targets to avrdude.conf
2022-01-13 19:59:42 +01:00
99d8fa5d88
Add missing ATtiny targets
...
+ a little formatting
2022-01-13 19:45:45 +01:00
cc77f89953
Add missing ATmega targets
...
+ a little formatting
2022-01-13 19:45:30 +01:00
7064447378
Add all possible ATmega__5 and ATmega__9 targets
...
This includes the "non-P", A, P and PA suffixes
2022-01-13 18:27:36 +01:00
77ed8b98c5
Add ATmega165A/P targets
2022-01-13 18:27:36 +01:00
32232faa2b
Add missing ATmega targets
2022-01-13 18:27:34 +01:00
ab57f38387
Replaced tabs by spaces
2022-01-13 10:01:01 +01:00
90d0fa7346
Merge remote-tracking branch 'avrdudes/main' into main
2022-01-13 09:57:42 +01:00
3fbac230b3
Enable printf %n format specifier for MSVC
2022-01-12 20:41:52 +01:00
65d5cfadc1
Fix for TPI fuse write
...
In get_fuse_bitmask(), ensure the AVR_OP_READ and AVR_OP_WRITE
m->op[] fields are actually filled in, before referencing them.
If they are missing, just return a full byte mask (0xFF).
In avr_write(), for TPI memory, if the write consist of one byte onle
(which is the case for fuse byte writing), resort to avr_write_byte()
instead as it already implements everything needed. This leaves the
avr_write() implementation to handle full paged writes with an even
number of bytes only.
2022-01-11 22:00:22 +01:00
4e1bbf07ac
Merge pull request #826 from yegorich/cmake-dll
...
CMake: enable dynamic-link library for libavrdude
2022-01-11 15:40:58 +01:00
e72fa01073
Fix libavrdude library file name
...
CMake adds "lib" prefix to the library name and hence we get the
following name "liblibavrdude". Use set_target_properties to
set the prefix to "".
2022-01-11 14:58:40 +01:00
2d833e7ceb
Merge pull request #820 from dl8dtl/libavrdude-remove-ac_cfg_h
...
Remove ac_cfg.h from libavrdude.h
2022-01-11 12:44:26 +01:00
8374564665
CMake: enable dynamic-link library for libavrdude
...
Add on option BUILD_SHARED_LIBS to also build a DLL variant
of the libavrdude library. Turn it off by default to preserve
current behavior.
2022-01-11 12:02:36 +01:00
c7f7fcda8e
Fix URL for linuxgpio programmer
...
Closes #419
2022-01-10 22:12:36 +01:00
22e6c4b325
Merge pull request #818 from yegorich/pindefs-fix-warning
...
pindefs: conform to the function declaration
2022-01-10 21:33:04 +01:00
a3bf6cc4c5
Fix names of Logic Green devices
...
There's some confusion as the datasheet calls the device family
LGT8FX8P but the devices itself are LGT8F88P through LGT8F328P.
Obviously, the "X" is actually a wildcard denoting the flash size.
2022-01-10 21:29:09 +01:00
0a4193f742
Merge pull request #817 from mariusgreuel/pr-print-expected-part
...
Print expected part
2022-01-10 21:25:39 +01:00
48bcc269e2
Remove ac_cfg.h from libavrdude.h
2022-01-10 15:12:33 +01:00
cf35b7fe32
Include ac_cfg.h before libavrdude.h
...
On MSVC, this is required in order to have a definition of
PATH_MAX in place.
2022-01-10 14:51:48 +01:00
fa8a31740f
Remove ac_cfg.h from libavrdude.h
2022-01-10 14:27:08 +01:00
92a3eb1080
Merge remote-tracking branch 'avrdudes/main' into main
2022-01-09 23:39:09 +01:00
2fd967866c
Don't display target info that's not present in Avrdude.conf
...
I still have to figure out why all parts are flagged with support for both serial and parallel programming interfaces, even when this is not the case
2022-01-09 18:13:07 +01:00
1a85e01b63
pindefs: conform to the function declaration
...
The last parameter in the pins_check() routine is declared as
"const bool". Add the missing "const" specifier.
2022-01-09 15:57:45 +01:00
f67cb3c224
Preserve the insertion order of programmers and parts when parsing the avrdude.conf file
2022-01-09 11:52:52 +01:00
1297098eae
When the specified part has a matching signature, print the specified part instead of one from the parts list
2022-01-09 11:52:47 +01:00
40f0fae5a4
Update manpage for USBtiny and direct SPI
2022-01-09 10:57:22 +01:00
cffa6c7ca0
Add direct SPI mode to USBtiny
...
It is limited to exactly sending (and receiving) multiples of 4 bytes,
and unlike programming mode where slave select isn't required, SS must
be held low for SPI to work. USBtiny programmers don't usually have
a wire for SS.
2022-01-09 10:57:22 +01:00
112b6edd1c
Set back to programming mode on quit
...
Otherwise it can't read the fuses and the safe fuse code complains.
2022-01-09 10:27:36 +01:00
8f16c2a1e4
Add more memory sections to read from
...
+ improve Avrdude output in verbose mode
2022-01-08 23:57:37 +01:00
a182ef5a26
Notify user if pgm->open() failes
...
This is supposed to fix issue #813
2022-01-08 22:02:25 +01:00
a8de8b8b8f
Merge branch 'avrdudes:main' into main
2022-01-08 19:44:20 +01:00
4a26aac5c8
Added RTS/DTR release message
2022-01-08 19:14:33 +01:00
b70fe0e956
Added RTS/DTR status message
2022-01-08 18:53:46 +01:00
d2ae6a824f
Add C code alternative to __builtin_popcount.
2022-01-08 16:13:32 +01:00
21d7fc58b6
Add -Wall to CMake compiler options
2022-01-08 16:13:26 +01:00
1631fc4dd8
Implemented extended parameter for RTS/DTR lines management
2022-01-08 10:04:25 +01:00
428f5828b4
Add cross-compile to GitHub build actions
2022-01-07 23:57:54 +01:00
b87b527b3a
Add advapi32.lib to MSVC builds
2022-01-07 23:57:54 +01:00
80d53839dd
Replace MSVC implementation of __builtin_popcount with C code
2022-01-07 23:57:54 +01:00
e1221e22ff
Fix -Wpointer-sign warning in micronucleus.c
2022-01-07 23:48:56 +01:00
f2d6342d21
buspirate: fix invalidScanfArgType_int warning
...
"%x" specifies an unsigned int, hence change the type of spi_write, spi_read
accordingly.
2022-01-07 19:22:57 +01:00
6a737a0c13
Merge pull request #798 from mariusgreuel/pr-msvc
...
Add MSVC builds and better WinUSB/FTDI support
2022-01-07 18:30:19 +01:00
fc54ef5e59
Clean up legacy code
2022-01-07 17:57:02 +01:00
fe6f08d48f
Use alloca for stack based memory allocation
2022-01-07 17:54:36 +01:00
d05c2db3fb
Add a missing define to the MSVC compatiblity shim
2022-01-07 17:54:36 +01:00
1fb88c3040
Add external libraries to CMake project
2022-01-07 17:54:36 +01:00
c035c91db5
Add compatibility shim for MSVC
2022-01-07 17:54:36 +01:00
a91e389a5e
Merge pull request #807 from yegorich/src-typos
...
Fix typos all over the code
2022-01-07 13:15:14 +01:00
f29b2a283a
Fix typos all over the code
2022-01-07 11:31:16 +01:00
539eec79e6
Merge pull request #801 from dl8dtl/conffile-clean-up
...
Conffile clean up
2022-01-07 09:23:17 +01:00
f20c4bd9e6
Add support for Teensy bootloader
2022-01-06 23:39:17 +01:00
118993a584
Merge pull request #803 from MCUdude/add-missing-targets
...
Add missing ATtiny targets to avrdude.conf
2022-01-06 22:51:57 +01:00
6cfdb3a04b
Remove obsolete file
2022-01-06 22:39:36 +01:00
d5b2106644
term: fix memleakOnRealloc
...
Assign the newly allocated value to a temporary variable and in the
case where we cannot allocate memory, free the initial pointer.
2022-01-06 11:28:39 +01:00
97c34f7b26
Merge pull request #792 from yegorich/ftdi-fix-deprecated-call
...
avrftdi: don't use the deprecated ftdi_usb_purge_buffers routine
2022-01-05 17:41:08 +01:00
1529277477
When finding LIBFTDI, don't clobber LIBS but extend it
2022-01-05 17:26:39 +01:00
50e15a5cf8
Add missing ATtiny targets
...
ATtiny48, 87, 102, 104, 167 and 828
2022-01-05 11:50:31 +01:00
4b76ccc951
Merge branch 'main' into main
2022-01-05 08:05:38 +01:00
e27990bd54
Merge pull request #786 from mariusgreuel/pr-micronucleus
...
Add support for Micronucleus bootloader
2022-01-04 23:52:00 +01:00
b8c825c9af
Merge pull request #795 from MCUdude/add-pkobn_updi-vtarg
...
Add target voltage adjustment for Curiosity Nano boards
2022-01-04 23:50:20 +01:00
124ef7fe3d
Move the backslash replacement out into a separate function
2022-01-04 23:10:14 +01:00
6a87a110cc
Move the config file names out as #define into avrdude.h
2022-01-04 23:03:47 +01:00
374861f62e
Move the system config file search after option processing
...
For one, this allows us to use MSG_DEBUG in order to emit debug
messages (requires -v processing).
As another effect, if the -C conffile option was given, there is no
need at all to run through all the process of looking up a system
config file - it's right there already.
Also, move it after the logfile creation if -l logfile was given, so
the respective debug message can go to the logfile.
2022-01-04 22:45:47 +01:00
3747db516a
Add support for Micronucleus bootloader
2022-01-04 18:37:57 +01:00
863f77d827
Fix a (valid) warning about comparison of char vs. int against EOF
...
Closes PR #796
2022-01-04 13:48:11 +01:00
f9ea588525
Update the man page to reflect the search order for avrdude.conf
2022-01-03 23:53:51 +01:00
5c896992cd
Find 'avrdude.conf' based on absolute path to executable ( #780 )
...
* Find 'avrdude.conf' based on absolute path to executable
* Update coding style
* Update coding style
* Update 'src/doc/avrdude.texi' to reflect the new search method for 'avrdude.conf'
2022-01-03 23:20:31 +01:00
ecca860972
Add target voltage adjustment for Curiosity Nano boards
...
in Avrdude terminal mode
2022-01-03 18:51:33 +01:00
dc1fed40bf
avrftdi: don't use the deprecated ftdi_usb_purge_buffers routine
...
Since commit ed46f09c1ccd1351e003a200ba50e3e4778ac478 (Implement
tc[io]flush methods & deprecate broken purge_buffers methods.)
ftdi_usb_purge_buffers() routine is deprecated. Use HAVE_FTDI_TCIOFLUSH
macro to invoke the newly introduced ftdi_tcioflush() routine.
2022-01-03 17:59:05 +01:00
4d5af6370d
Change version URL from Savannah to GitHub
2022-01-03 15:13:00 +01:00
12a67554d9
Derive program version from last commit
2022-01-03 15:04:25 +01:00
e843db55ae
Use yacc/byacc as an alternative to bison
2022-01-03 13:10:54 +01:00
f96b98e9df
Mute "flash and boot" warning if s UPDI programmer is used
...
Currently, no UPDI compatible AVR has a dedicated boot section like the Xmegas do
2022-01-02 19:20:05 +01:00
dcd5374ae9
Print meaningful error if programmer doesn't support target
2022-01-02 12:57:42 +01:00
b9f03b1377
Fix typo in URL
2022-01-02 12:13:15 +01:00
f5bec43812
Add jtag2updi programmer to docs
2022-01-02 12:13:15 +01:00
a2a276a8cc
Add support for UPDI devices though jtag2updi
...
'Hack' borrowed from https://github.com/facchinm/avrdude
2022-01-02 12:13:15 +01:00
71d5dbec48
Add more jtagmkii baud rates
2022-01-02 12:13:13 +01:00
a6a06f47f6
Prevent `spi' and `pgm' commands from crashing terminal mode
...
These commands are been meaningful only on direct bitbang programming
adapters which implement a pgm->setpin method.
Disable these commands for all other programmers, and issue an
informational message.
This is a partial fix for bug #790 .
2022-01-01 20:58:26 +01:00
69231d7ad0
Merge pull request #791 from MCUdude/add-programmers
...
Add PicKit4 and SNAP programmers
2022-01-01 20:31:59 +01:00
2623e7a9fa
Update docs to reflect new programmers
2022-01-01 12:06:52 +01:00
302b6eb05a
Add PicKit4 and SNAP ISP and PDI programmer options
2022-01-01 12:04:16 +01:00
5246cf1750
Make Windows version resource accept fewer than four version numbers
2021-12-29 22:28:19 +01:00
0a335e2f73
Add jtag2updi programmer
2021-12-29 14:27:51 +01:00
a369f9d28f
SerialUPDI man page addition
2021-12-28 23:34:34 +01:00
805ca48ffa
Merge remote-tracking branch 'upstream/main'
2021-12-28 23:24:13 +01:00
b14459dc04
Merge pull request #782 from dbuchwald/main
...
Documentation for SerialUPDI programmer
2021-12-28 23:23:37 +01:00
a625db23e0
Merge remote-tracking branch 'upstream/main'
2021-12-28 15:00:53 +01:00
f531af70db
Merge pull request #783 from mariusgreuel/pr-improve-cmake
...
Improve CMake project
2021-12-28 14:47:58 +01:00
55251ea6f5
Fix avr_read() for page reads with page sizes that are not a multiple of the memory size
2021-12-26 16:57:23 +01:00
3840468e36
Improve CMake project to filter conditional sections
2021-12-26 16:46:15 +01:00
f391b7138b
Improve CMake project for FreeBSD builds
2021-12-26 16:40:28 +01:00
c48c5135d8
Added SerialUPDI related documentation
2021-12-26 14:34:01 +01:00
d14bb02dca
Fix memory leaks
...
Free buf in the case of an error. Found via cppcheck.
2021-12-24 10:14:16 +01:00
f2dc95ea01
Fix typos
2021-12-23 17:17:08 +01:00
025ebd4ae8
Ah OK, CMAKE doesn't like dashes in the version number.
...
Turn 6.99-20211218 into 6.99.20211218
2021-12-22 23:33:20 +01:00
47947fb35c
Make version numbers of configure.ac and CMakeLists.txt match
...
We are moving towards AVRDUDE 7.0, so express this by using
6.99 by now.
2021-12-22 23:27:05 +01:00
86cef2559f
Add serialupdi to CMakeLists.txt
2021-12-22 22:40:21 +01:00
1f44ec5e0c
Merge pull request #768 from mariusgreuel/pr-migration2
...
GitHub Migration part 2: start a CMake infrastructure
2021-12-22 22:20:21 +01:00
c093b21a67
Moved SerialUPDI sources to correct location
2021-12-21 21:45:36 +01:00
291549d021
Merged AVRDUDES/main into SerialUPDI branch
2021-12-21 21:38:51 +01:00
60cb548075
Remove 'windows' folder with giveio.sys driver
2021-12-21 17:45:35 +01:00
e4ebfe420c
Add Windows version resource
2021-12-20 17:51:44 +01:00
fbdb6a98c0
Add CMake project
2021-12-20 17:50:42 +01:00
868895e2e0
Make `bootstrap' executable
...
That bit appears to get lost during transition from SVN.
2021-12-19 00:35:52 +01:00
3a8af359f3
Update toplevel files.
...
Integrate old INSTALL into README.md, both files had a lot
of (potential) overlap.
Add template for new entries in NEWS, targetting next release.
Bump version number to 6.99-20211218
Tentatively, with the Github migration and all ongoing code
restructuring, we aim for a version 7.0 release at some point
in the future.
2021-12-18 22:32:50 +01:00
5633a6d88a
Move source files to 'src' folder
2021-12-17 09:17:42 +01:00
MCUdude
Dawid Buchwald
Jörg Wunsch
Marius Greuel
Yegor Yefremov
David Fries
Kristof Mulier