Commit Graph

2160 Commits

Author SHA1 Message Date
Stefan Rueger 7743051926
Merge pull request #1095 from mariusgreuel/pr-fix-multiline-configure
CMake: Fix dependency chain between avrdude.conf.in and avrdude.conf
2022-09-24 13:22:37 +01:00
Stefan Rueger db8b04f423
Merge pull request #1094 from papazoga/main
avrdude.conf.in: Adds digilent-hs2 dongle
2022-09-24 13:22:14 +01:00
Stefan Rueger 3b8ac76246
Merge pull request #1093 from stefanrueger/gemmaBoot
Create two bootloader programmers for gemmaBoot boards
2022-09-24 13:21:44 +01:00
Stefan Rueger fe991b8214
Merge pull request #917 from asmirnou/iss45256-sysfs-gpio
Fix permission denied error in linuxgpio programmer
2022-09-24 13:21:08 +01:00
Stefan Rueger 097c78098d
Change printf() to avrdude_message() in linuxgio.c 2022-09-23 23:28:47 +01:00
Stefan Rueger 7087fd9f3e
Raise info level for overwriting mcuid to MSG_DEBUG 2022-09-11 23:08:48 +01:00
Stefan Rueger 168a8b92e9
Default mcuid without warning for parts known at compile time 2022-09-11 15:33:23 +01:00
Stefan Rueger a5f3885b50 Add and modify programmers for gemmaBoot in avrdude.conf.in 2022-09-07 09:56:28 +01:00
Marius Greuel 07ed4746be CMake: Fix dependency chain between avrdude.conf.in and avrdude.conf 2022-09-04 16:19:01 +02:00
Stefan Rueger b99df388bd
Change comment for diligent-hs2 in avrdude.conf.in 2022-09-01 13:08:44 +01:00
Alex Papazoglou bf70b5fc8c avrdude.conf.in: Cosmetic changes
Corrected formatting using /s. Added a URL for the
reference manual.
2022-08-31 20:43:27 -07:00
Alex Papazoglou 4af49bb5fb avrdude.conf.in: Adds digilent-hs2 dongle
Adds support for Digilint JTAG HS2 in MPSSE mode.
2022-08-31 11:45:08 -07:00
Stefan Rueger a536a01ebf
Create a bespoke bootloader programmer for gammaBoot trinkets 2022-08-31 18:15:35 +01:00
Stefan Rueger dab99c0823
Update NEWS 2022-08-31 17:35:03 +01:00
Stefan Rueger 0d1b49a4e4
Merge pull request #1091 from stefanrueger/config_file
Add new components in `avrdude.conf.in`
2022-08-31 17:27:05 +01:00
Stefan Rueger 602fab481c
Relax uniqueness check of mcuid for parts that might be variants
Two parts are considered variants here if one part name starts with the name
of the other, flash memory sizes are the same, flash page sizes are the same
and the number of interrupts are the same.
2022-08-31 11:59:19 +01:00
Stefan Rueger fc970226b6
Add avrintel.[ch] to Makefile.am 2022-08-31 11:31:58 +01:00
Stefan Rueger 40896802af
Allow integer expressions in config file where numbers are expected
Notable exceptions are for pin numbers and where numbers are separated by
space only, eg, in signature and readback assignments.
2022-08-31 11:29:06 +01:00
Stefan Rueger b328067f87
Remove has_jtag, has_debugwire, etc assignments in avrdude.conf.in
These assignments have been removed as they are redundant and only
imitate the single prog_modes = PM_... | PM_....; assignment. They
are still allowed in the grammar, and would still work.
2022-08-30 23:25:00 +01:00
Stefan Rueger ffb8b7fcdf
Try different header files for Windows compatibility 2022-08-30 21:31:11 +01:00
Stefan Rueger 4f7868ef4b
Declare rather than define extern const uPcore_t uP_table[372]; 2022-08-30 19:54:41 +01:00
Stefan Rueger 626a43b139
Add avrintel.[ch] to the project and warn if mcuid incompatible with avrintel.c 2022-08-30 19:48:17 +01:00
Stefan Rueger b0198a319f
Offload the programming interface info from part->flags to part->prog_modes
flags now just hold parameters of the JTAG interface and some secondary
serial, parallel, pseudo parallel info. This separation brings clarity. It
used to be hard to augur whether a part has an ISP interface:

   (part->flags & (AVRPART_HAS_PDI | AVRPART_AVR32 | AVRPART_HAS_TPI
    | AVRPART_HAS_UPDI)) == 0 && (part->flags & AVRPART_SERIALOK) != 0

or had HVSP or HVPP capability, for that matter. Now it is just, eg,

  part->prog_modes & PM_ISP
  part->prog_modes & PM_HVPP
2022-08-30 16:33:42 +01:00
Stefan Rueger 0756b8e3ad
Declare rather than define current_strct in header config.h 2022-08-30 02:49:37 +01:00
Stefan Rueger 0df8b87eda
Set part prog_modes, mcuid, n_interrupts and n_page_erase in avrdude.conf.in 2022-08-30 02:31:57 +01:00
Stefan Rueger ed2b8342df
Prepare for new components in avrdude.conf incl prog_modes
- Add prog_modes to part and programmer definitions; prog_mode is a bitwise
   or of programming modes
     + PM_SPM: Bootloaders, self-programming with SPM/NVM Controllers
     + PM_TPI: t4, t5, t9, t10, t20, t40, t102, t104
     + PM_ISP: SPI programming for In-System Programming (typ classic parts)
     + PM_PDI: Program and Debug Interface (xmega parts)
     + PM_UPDI: Unified Program and Debug Interface
     + PM_HVSP: High Voltage Serial Programming (some classic parts)
     + PM_HVPP: High Voltage Parallel Programming (most non-HVSP classic parts)
     + PM_debugWIRE: Simpler alternative to JTAG (a subset of HVPP/HVSP parts)
     + PM_JTAG: some classic parts, some xmega
     + PM_aWire: AVR32 parts
 - Add mcuid, a unique id in 0..2039, to part definition for urclock programmer
 - Add n_interrupts, the number of interrupts, to part definition
 - Add n_page_erase to part definition (# of pages erased during NVM erase)

 - Implement a simple calculator in config_gram.y so numeric values can be
   expressed as simple expressions such as PM_SPM | PM_UPDI

 - Introduce a new method of assigning simple components to the grammar without
   touching config_gram.y via an eligible-component list in config.c; numeric
   expressions on the rhs of an assignment resolve to integer values

 - Update documentation in avrdude.conf.in and avrdude.texi
2022-08-30 02:08:15 +01:00
Stefan Rueger eb7bdfd422
Merge pull request #1086 from stefanrueger/config_file
Rewrite avrdude.conf.in with developer options
2022-08-30 01:19:00 +01:00
Stefan Rueger cddf2943eb
Line up assignment operators in avrdude.conf.in 2022-08-30 01:10:45 +01:00
Stefan Rueger 0ccdd24d7e
Ensure arrays in developer_opts.c have at least one element 2022-08-24 13:50:07 +01:00
Stefan Rueger c97eb85cd8
Fix reset=dedicated|io; in avrdude.conf.in
Done by adding code in developer_opts.c that allows to inject part
or memory parameters into a semi-automated rewrite of avrdude.conf
This is a generic method, whereby an external program can, eg.,
scrape atdf files for the right parameters and put them into a
source table into developer_opts.c
  - Then write parts description with -p*/i
  - Use the output in a new avrdude.conf
  - Output again with -p* (no /i) and use that for final avrdude.conf
  - Remove table entries
2022-08-24 12:55:00 +01:00
Stefan Rueger 7fab75336e
Replace tabs in avrdude.conf.in with spaces 2022-08-24 11:46:24 +01:00
Stefan Rueger 716984dbb1
Reformat conditional programmers in avrdude.conf.in using -c* 2022-08-24 10:57:25 +01:00
Stefan Rueger 57ebd36a01
Rewrite avrdude.conf.in file from avrdude -c* -p* output
Some manual editing is still necessary to cater for the
@HAVE_PARPORT_BEGIN@ etc sections. This commit also fixes
superfluous whitesapce at the end of avrdude.conf.in lines

Although the avrdude.conf file has changed much, the internal
representation in avrdude has not. This can be verified by
exporting the raw internal data through

  avrdude -c*/r -p*/r >/tmp/avrdude.raw

before the change and by comparing again after the change:

  avrdude -c*/r -p*/r | diff - /tmp/avrdude.raw
2022-08-24 01:10:51 +01:00
Stefan Rueger 09d14601af
Fix 4 parts wrt to their interfaces in avrdude.conf 2022-08-24 00:54:11 +01:00
Stefan Rueger 3e49f078b3
Harden list management in pgm.c/config_gram.y 2022-08-24 00:03:45 +01:00
Stefan Rueger 731d581398
Update NEWS 2022-08-23 17:23:47 +01:00
Stefan Rueger 88c48cdf82
Merge pull request #1074 from stefanrueger/1073
Correct flash paged write for avrftdi.c
2022-08-23 17:09:46 +01:00
Stefan Rueger fc6ef68b98
Merge pull request #1083 from stefanrueger/1081
Make avr910 programmer initialize() less verbose
2022-08-23 17:08:23 +01:00
Stefan Rueger 61efb02ef8
Merge pull request #1078 from stefanrueger/terminal
Use const for programmer functions where useful
2022-08-23 17:06:53 +01:00
Stefan Rueger 5f910580b7
Extend const args to avr_set_*() and developer_opts.c
... and print programming modes for -p*/d
2022-08-23 16:57:49 +01:00
Stefan Rueger c6ef6a9b9b
Adapt indentation of a line in buspirate.c to neighbouring lines 2022-08-22 00:00:39 +01:00
Stefan Rueger c7951813ef
Make avr910 programmer initialize() less verbose 2022-08-21 23:49:54 +01:00
Stefan Rueger 56aae55737
Replace loop/if condition and reduce signed comparison warnings in avrftfi.c
Change (int) poll_index >= (int) addr to poll_index+1 > addr as the former
might turn out to be implementation-defined. The latter is always defined
and what we want here (poll_index+1 won't overflow). Originally, the
condition was poll_index > addr-1, which was always false for addr=0 owing to
2^n modulo arithmetic of unsigned.

Also changed a few comparisons so they no longer are between signed
and unsigned integers reducing compiler warnings.
2022-08-21 00:05:44 +01:00
Stefan Rueger f8dd9bc97d
Correct flash paged write for avrftdi.c 2022-08-20 14:08:04 +01:00
Stefan Rueger 38aa1313f9
Print device code in avr910.c as unsigned char 2022-08-19 23:14:19 +01:00
Stefan Rueger c03f4a7925
Use const in PROGRAMMER function arguments where appropriate
In order to get meaningful const properties for the PROGRAMMER, AVRPART and
AVRMEM arguments, some code needed to be moved around, otherwise a network of
"tainted" assignments risked rendering nothing const:

 - Change void (*enable)(PROGRAMMER *pgm) to void (*enable)(PROGRAMMER *pgm,
   const AVRPART *p); this allows changes in the PROGRAMMER structure after
   the part is known. For example, use TPI, UPDI, PDI functions in that
   programmer appropriate to the part. This used to be done later in the
   process, eg, in the initialize() function, which "taints" all other
   programmer functions wrt const and sometimes requires other finessing with
   flags etc. Much clearer with the modified enable() interface.

 - Move TPI initpgm-type code from initialize() to enable() --- note that
   initpgm() does not have the info at the time when it is called whether or
   not TPI is required

 - buspirate.c: move pgm->flag to PDATA(pgm)->flag (so legitimate
   modification of the flag does not change PROGRAMMER structure)

 - Move AVRPART_INIT_SMC and AVRPART_WRITE bits from the flags field in
   AVRPART to jtagmkII.c's private data flags32 fiels as FLAGS32_INIT_SMC and
   FLAGS32_WRITE bits

 - Move the xbeeResetPin component to private data in stk500.c as this is
   needed by xbee when it saddles on the stk500 code (previously, the flags
   component of the part was re-dedicated to this)

 - Change the way the "chained" private data are used in jtag3.c whilst
   keeping the PROGRAMMER structure read-only otherwise

 - In stk500v2.c move the STK600 pgm update from stk500v2_initialize() to
   stk500v2_enable() so the former keeps the PROGRAMMER structure read-only
   (for const assertion).

 - In usbasp change the code from changing PROGRAMMER functions late to
   dispatching to TPI or regular SPI protocol functions at runtime; reason
   being the decision whether to use TPI protocol is done at run-time
   depending on the capability of the attached programmer

Also fixes Issue #1071, the treatment of default eecr value.
2022-08-17 16:05:28 +01:00
Stefan Rueger dfef8bb0a8
Add libavrdude functions avr_mem_is_flash_type() and avr_mem_is_eeprom_type() 2022-08-15 14:57:12 +01:00
Stefan Rueger e332ecf0b4
Change array for copy mem->desc to const char * in term.c 2022-08-15 14:25:58 +01:00
Stefan Rueger a4bfa8247d
Update NEWS 2022-08-15 00:56:38 +01:00
Stefan Rueger 4c6ba0aae6
Merge pull request #1063 from sbngross/main
man-page: Fix logfile short option
2022-08-15 00:49:39 +01:00