Commit Graph

24 Commits

Author SHA1 Message Date
Brian S. Dean b09107e9af Optimize flash memory handling a little bit by ignoring 0xff data that
resides above the last non-0xff data value in the address space.  Only
do this for flash memory since writing a 0xff to flash is a no-op.
This has the affect of creating smaller output files when dumping
memory contents from flash if the program in flash does not consume
the whole memory space.  It also results in shorter programming times
when avrdude is asked to load a file into flash that has lots of 0xff
filled data past the last non-0xff data value.

I think this is basically where Alexey was going with his s-record
routine, but this should have a similar affect for all the I/O
routines.  The main difference is that Alexey's also optimized 0xff
from the beginning of the address space and was not limited to flash.

I think that these optimizations should be limited to the flash since
it is currently the only memory that treats 0xff as special.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@331 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-05-22 02:33:17 +00:00
Brian S. Dean ee8bf2d5fc Makefile: include a target to automatically generate the dependency
list.

All others


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@177 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-08 04:17:25 +00:00
Brian S. Dean 08e8c6e8ee Re-license using the GNU GPL. Thanks to Ted Roth for the patch.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@172 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-06 19:08:33 +00:00
Brian S. Dean 1e0c4f8756 Get rid of the verbose printing of individual file CVS version ids.
This was intended to be used for identifying code in the field for
incoming bug reports, but I've never really found it all that useful.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@171 81a1dc3b-b13d-400b-aceb-764788c761c2
2003-02-06 05:45:06 +00:00
Brian S. Dean d36b48d92b Optimize reading and writing for the STK500 programmer if the part
supports paged reads and writes.  This greatly decreases the
program/verify time from about 4.5 minutes down to about 10 seconds in
a 12K program size test case.

Print out the hardware and firmware version for the STK500 if verbose
is enabled.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@161 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-12-01 06:35:18 +00:00
Brian S. Dean a193330803 Seperate programmer operations out into a driver-like interface so
that programmers other than the direct parallel port connection can be
supported.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@159 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-11-30 14:09:12 +00:00
Brian S. Dean f2604f3523 Fix -Y option. Reported by Joerg Wunsch.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@153 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-11-06 02:19:57 +00:00
Brian S. Dean 4d2df35736 Implement a way of tracking how many erase-rewrite cycles a part has
undergone.  This utilizes the last two bytes of EEPROM to maintain a
counter that is incremented each time the part is erased.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@138 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-08-01 01:00:03 +00:00
Brian S. Dean fa956af92c Fix error reporting by avr_write_byte().
Fix setting of status LEDs under various write-fail conditions.

Add a flag to indicate that a memory type requires the device to
possibly be powered off and back on after a write to it.  This is due
to a hardware problem on some Atmel devices, see:

	http://www.atmel.com/atmel/acrobat/doc1280.pdf

Add greater verbosity to the part-display code when verbose>1 to
display avrprog's encoding of the defined programming instructions.
This is primarily for debugging purposes.


Part updates:

  * add the AT90S4414 part

  * add fuse and lock bit access instructions for the AT90S1200,
    AT90S4434, and AT90S8515.

  * add the pwroff_after_write flag to the fuse bits for the AT90S2333
    and AT90S4433 parts


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@123 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-02-14 02:48:07 +00:00
Brian S. Dean fbbd6ce36e Update version number. Update copyright.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@118 81a1dc3b-b13d-400b-aceb-764788c761c2
2002-01-12 01:51:35 +00:00
Brian S. Dean fb233af934 This is a jajor re-write of the programming algorithms. The Atmel
serial programming instructions are not very orthoganal, i.e., the
"read fuse bits" instruction on an ATMega103 is an entirely different
opcode and data format from the _same_ instruction for an ATMega163!
Thus, it becomes impossible to have a single instruction encoding
(varying the data) across the chip lines.

This set of changes allows and requires instruction encodings to be
defined on a per-part basis within the configuration file.  Hopefully
I've defined the encoding scheme in a general enough way so it is
useful in describing the instruction formats for yet-to-be invented
Atmel chips.  I've tried hard to make it match very closely with the
specification in Atmel's data sheets for their parts.  It's a little
more verbose than what I initially hoped for, but I've tried to keep
it as concise as I could, while still remaining reasonably flexible.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@100 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-11-21 02:46:55 +00:00
Brian S. Dean f1af5d3981 Add support for ATMega163.
Add support for reading/writing ATMega163 lock and fuse bits.
Unfortunately, in looking at the specs for other ATMega parts, they
use entirely different instruction formats for these commands.  Thus,
these routines won't work for the ATMega103, for example.

Add support for sending raw command bytes via the interactive terminal
interface.  This allows one to execute any programming instruction on
the target device, whether or not avrprog supports it explicitly or
not.  Thus, one can use this feature to program fuse / lock bits, or
access any other feature of a current or future device that avrprog
does not know how to do.

Add in comments, an experimental instruction format in the
configuration file.  If this works out, it would allow supporting new
parts and non-orthoganal instructions across existing parts without
making avrprog code changes.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@99 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-11-19 17:44:24 +00:00
Brian S. Dean 90d4f82fc9 Fix (again, hopefully) page addressing for the ATMega parts.
Rename the poorly chosen name "bank" to "page" for page addressing.
Atmel calls it "page" in their documentation.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@91 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-10-16 23:32:30 +00:00
Brian S. Dean c934f8cc7a Fix ATMega flash addressing. Add an ATMEGA16 part. Perform sanity
checking on the memory parameters for parts that do bank addressing.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@88 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-10-16 02:47:55 +00:00
Brian S. Dean 3d8f8bcd45 Use lex/yacc for parsing the config file. Re-work the config file
format using a more human-readable format.

Read part descriptions from the config file now instead of hard-coding
them.

Update usage().

Cleanup unused code.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@79 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-10-14 23:17:26 +00:00
Brian S. Dean 3bae0d8d14 First cut at supporting the ATmega 103 which uses bank addressing and
has a 128K flash.

Due to the bank addressing required, interactive update of the flash
is not supported, though the eeprom can be updated interactively.
Both memories can be programmed via non-interactive mode.

Intel Hex Record type '04' is now generated as required for outputing
memory contents that go beyond 64K.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@78 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-10-14 02:53:21 +00:00
Brian S. Dean f73b0f9eba Style fixes.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@77 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-10-13 03:13:13 +00:00
Brian S. Dean 42a81370c7 Commit changes in preparation for support the ATMega line.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@76 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-10-13 03:12:52 +00:00
Brian S. Dean a87a5d0671 Get rid of the Usage file.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@51 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-01-25 16:24:08 +00:00
Brian S. Dean eff6750e5c Move pin definitions to their own file.
First pass at providing feedback via the optionally connected leds.  I
don't actually have any of these attached to my programmer, so I can
only guess as whether this is toggling them on and off correctly.

Also, enable and disable the optional 74367 buffer.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@50 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-01-24 19:10:34 +00:00
Brian S. Dean fc56e6b4f9 Rearrange the pinout for the programmer to be a little more logical.
Provide hooks to support a buffered programmer, pin 6 is now used to
enable a buffer that can be used to isolate the target system from the
parallel port pins.  This is important when programming the target
in-system.

Totally change the way the pin definitions are defined.  Actually
set/clear pins based on the way more intuitive pin number, instead of
PPI data register, bit number combination.  A table of pin data is
used so that any hardware inversion done by the parallel port is
accounted for, what you set is actually what appears at the pin.
Retain the old method for handling Vcc, however, because the hold
method is much easier to use when setting / retrieving multiple pins
simultaneously.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@49 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-01-24 18:45:58 +00:00
Brian S. Dean 209f979c7f Makefile : use gzip -f for man page installation so that we don't get
prompted.

avr.c avr.h fileio.c term.c :

     Change the avrpart data structure so that the typedef AVRMEM is
     used as an index into an array for the sizes of the memory types
     and also for pointers to buffers that represent the chip data for
     that memory type.  This removes a lot of conditional code of the
     form:

		switch (memtype) {
			case AVR_FLASH :
		 	...
		}

     Also, re-code avr_read_byte() and avr_write_byte() to properly
     handle the flash memory type without having to tell them whether
     they should program the high byte or the low byte - figure that
     out from the address itself.  For flash memory type, these
     routines now take the actual byte address instead of the word
     address.  This _greatly_ simplifies many otherwise simple
     operations, such a reading or writing a range of memory, by not
     having to worry about whether the address starts on an odd byte
     or an even byte.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@45 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-01-22 01:59:47 +00:00
Brian S. Dean c06319e33c Return error codes instead of exiting, thus making sure that we exit
only via main() so that the exitspecs are properly applied.

When reading input data from a file, remember how many bytes were read
and write and verify only that many bytes.

Don't complain when an input file size is smaller than the memory size
we are programming.  This is normal.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@44 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-01-20 16:34:28 +00:00
Brian S. Dean 4265bfa150 The program was getting too large for a single file. Split it up into
more modular pieces.

Also, accept command abbreviations as long as they are not ambiguous.


git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@38 81a1dc3b-b13d-400b-aceb-764788c761c2
2001-01-19 02:46:50 +00:00