Commit Graph

13 Commits

Author SHA1 Message Date
Joerg Wunsch cc65b4adab * usb_libusb.c (usbdev_open): Downgrade the max transfer size for
the main data endpoints when being forced so by the USB; this can
happen when attaching the JTAGICE3 to a USB 1.1 connection
* jtag3.c (jtag3_initialize): When detecting a downgraded max
transfer size on the JTAGICE3 (presumably, due to being connected
to USB 1.1 only), bail out as its firmware cannot properly handle
this (by now)



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1129 81a1dc3b-b13d-400b-aceb-764788c761c2
2013-01-02 10:16:37 +00:00
Joerg Wunsch 34a01cf0ac * config_gram.y: Implement the "ocdrev" keyword
* avrpart.c: (Dito)
* avrpart.h: (Dito)
* lexer.l: (Dito)
* avrdude.conf.in: Add "ocdrev" key/value pairs, based
on the AS6 XML file information.
* jtag3.c: Use the ocdrev in the parameter block.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1124 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-12-04 13:59:37 +00:00
Joerg Wunsch 1daf387df5 * jtag3.c: Make jtag3_command() public
* jtag3.h: (Dito.)
* jtag3_private.h: Add two new commands
* stk500v2.c: Implement the "MonCon disable" hack that
allows temporarily falling back to ISP when trying to
talk to a part that has debugWIRE enabled



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1123 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-12-03 21:03:06 +00:00
Joerg Wunsch 62f798bc54 Enable interactive adjustment of the various
clock frequencies (JTAG Xmega, JTAG megaAVR, PDI Xmega)
through the set_sck_period() callback.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1121 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-12-03 16:52:23 +00:00
Joerg Wunsch a0fb4bdb3f Remove unused code that was left over from
cloning the jtagmkII.c implementation



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1120 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-12-03 16:09:34 +00:00
Joerg Wunsch 2c540d02b6 * pgm_type.c: Add "jtagice3_isp" programmer hook
* avrdude.conf.in: Add "jtag3isp" programmer
* jtag3.c: jtag3_setparm() is now public
* jtag3.h: (Dito)
* stk500v2_private.h: Command 0x1D is CMD_SPI_MULTI only
for STK500v2, AVRISPmkII, and JTAGICEmkII; for JTAGICE3,
it's CMD_SET_SCK now; also add CMD_GET_SCK
* avrpart.c (avr_get_output_index): New function
* avrpart.h: (Dito)
* stk500v2.c: Implement the pasthrough programmer glue logic
for JTAGICE3 in ISP mode
* stk500v2.h: (Dito)
* avrdude.1: Document the JTAGICE3 support.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1119 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-12-03 15:52:38 +00:00
Joerg Wunsch 1acbb2fb64 Add a failure code for debugWIRE communication failures I
happened to run into.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1118 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-30 22:18:34 +00:00
Joerg Wunsch c5df7c5284 * jtag3.c (jtag3_read_byte, jtag3_write_byte): Remove the
m->offset from addr, JTAGICE3 doesn't need it anymore (similar
to JTAGICEmkII with 7+ firmware)
* jtag3.c (jtag3_read_byte): Allow for full-page reads of
EEPROM also for Xmega and debugWIRE, allow for signature
read in debugWIRE




git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1117 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-30 12:51:07 +00:00
Joerg Wunsch bc23715902 * jtag3_private.h: Add two more error detail codes I stumbled
across during development
* jtag3.c: (Dito.)
* usb_libusb.c: Reduce timeouts from 100 to 10 s, still long
enough, but not getting cold feet when something goes wrong.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1116 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-30 12:36:00 +00:00
Joerg Wunsch 1948e4ff3f * jtag3.c: Handle events returned by the ICE
* usbdevs.h: Add defines that mark an event in return
from usb_recv_frame().
* usb_libusb.c: (Dito.)



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1115 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-29 21:43:54 +00:00
Joerg Wunsch 3d50edc3a7 Implement page erase functionality.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1114 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-29 16:20:48 +00:00
Joerg Wunsch 2abf90726e * jtag3.c: Fill in the missing pieces for Xmega support (both,
PDI and JTAG).
* jtagmkII.c (jtagmkII_set_xmega_params): Use "fuse1" rather
than "fuse0" memory space to fill in the NVM offset from, as
there is no "fuse0" on some Xmega devices.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1111 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-29 13:31:11 +00:00
Joerg Wunsch 7a9db49e7c First support for Atmel JTAGICE3. Guessed from USB sniffer
traces made by Knut Schwichtenberg, and by similarity to
JTAGICEmkII.

Still quite incomplete, just megaAVR/JTAG is done by now.



git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@1109 81a1dc3b-b13d-400b-aceb-764788c761c2
2012-11-28 22:39:01 +00:00