59a191ee2c
Merge pull request #1101 from MCUdude/avr109-fix
...
Fix avr109 extended address
2022-10-05 22:00:59 +01:00
da275f8ef2
Adjust prog_modes on a few chip variants
...
Now variants of chips that the JTAG ICE supports will not cause a warning when used with the original JTAG ICE mkI.
Also, The ATmega165 isn't officially supported by the ICE mkI, so this should be properly tested with the ICE mkI first.
2022-10-05 19:24:40 +02:00
2c8cef2712
Merge branch 'avrdudes:main' into avr109-xmega
2022-10-02 22:43:03 +02:00
31c3db2617
Add support for prodsig read and usersig read/write
...
Currently only supported by the Xboot bootloader
2022-10-02 22:36:43 +02:00
ffabab1fb2
Improve pgm->id detection handling
2022-10-02 11:48:30 +02:00
4bc9e020f1
Merge branch 'flip2-reset' of https://github.com/MCUdude/avrdude into flip2-reset
2022-10-01 22:13:06 +02:00
419fd35b72
Mention linuxspi and flip2 programmers
...
in the -E exitspecs section. linuxspi and flip2 supports "-E reset" and "-E noreset".
2022-10-01 22:12:37 +02:00
ef209fe44e
GitHub Actions: Update apt index before installing packages
2022-10-01 22:12:37 +02:00
e05aa16510
use pgm->id to identify Power Debugger instead of USB PID
2022-10-01 21:17:55 +02:00
e39133daf5
Initial support for Power Debugger analog reading
...
Voltage and current though channel A and B
2022-10-01 21:17:01 +02:00
52eb2e36a7
Merge branch 'avrdudes:main' into flip2-reset
2022-09-30 20:16:58 +02:00
01ccab08b4
Improve exitspecs (-E) parsing
...
Use the same implementation as linuxspi does, instead of the one suggested in #733
2022-09-30 20:16:16 +02:00
521155c1c2
Improve punctuation in error message
2022-09-30 20:03:04 +02:00
3b8f41ca20
GitHub Actions: Update apt index before installing packages
2022-09-29 22:02:04 +02:00
e1a317c670
Remove Flip 2 stub functions
...
Used when compiling without libusb. Print reasonable error instead
2022-09-27 19:35:25 +02:00
2a64e78c7b
bugfix: saving errno of ioctl() call in a temporary variable to prevent overwriting by following avrdude_message() call
2022-09-25 16:46:10 +09:00
80ca8a644e
Add support for Flip 2 reset on exit
...
This makes it possible for the application to start immedeatly after the program has been loaded.
Simply use '-E reset' or '-E noreset'. Default is no reset.
Closes #733
2022-09-24 22:48:14 +02:00
62aa480876
Fix avr109 extended address
...
Closes #360 #454
2022-09-24 20:42:42 +02:00
8f478f0098
Update NEWS
2022-09-24 13:29:04 +01:00
9a59941dfe
Merge pull request #1100 from s-wakaba/sunxi_linuxspi_support
...
add extended parameter "disable_no_sc" for linuxspi programmer
2022-09-24 13:23:38 +01:00
94203eb441
Merge pull request #1099 from stefanrueger/prog_modes
...
Print compatible parts for programmer and vice versa using -c? or -p?
2022-09-24 13:23:12 +01:00
f172f05372
Merge pull request #1096 from mariusgreuel/pr-cmake-texinfo
...
CMake: Build docs
2022-09-24 13:22:55 +01:00
7743051926
Merge pull request #1095 from mariusgreuel/pr-fix-multiline-configure
...
CMake: Fix dependency chain between avrdude.conf.in and avrdude.conf
2022-09-24 13:22:37 +01:00
db8b04f423
Merge pull request #1094 from papazoga/main
...
avrdude.conf.in: Adds digilent-hs2 dongle
2022-09-24 13:22:14 +01:00
3b8ac76246
Merge pull request #1093 from stefanrueger/gemmaBoot
...
Create two bootloader programmers for gemmaBoot boards
2022-09-24 13:21:44 +01:00
fe991b8214
Merge pull request #917 from asmirnou/iss45256-sysfs-gpio
...
Fix permission denied error in linuxgpio programmer
2022-09-24 13:21:08 +01:00
f17a012325
Update documentation for linuxspi extended parameter disable_no_cs
2022-09-24 00:16:55 +01:00
097c78098d
Change printf() to avrdude_message() in linuxgio.c
2022-09-23 23:28:47 +01:00
ca154f812f
Improve error messaging in linuxspi.c
2022-09-23 16:53:52 +01:00
aa789d4662
Change error messages in linuxspi.c to maintain single style
2022-09-22 10:39:31 +01:00
93df07866a
Inform user of -x disable_no_spi when needed (without -v)
2022-09-22 10:31:59 +01:00
d8ff9bef6c
Improve error messaging when part or programmer are invalid
2022-09-21 15:38:05 +01:00
9e836d7988
Ensure avrdude.conf (programmer, part) pairs allow max one programming mode
2022-09-21 12:12:06 +01:00
4c29edbc41
Warn if a part shares multiple programming modes with a programmer
2022-09-21 12:10:24 +01:00
0175ffd21f
Shorten more redundant programmer description for -c \? -p part
2022-09-20 22:03:40 +01:00
505d53c2e1
Shorten redundant for bootloader description in -c ? -p part output
2022-09-20 21:55:29 +01:00
b04a83b1a2
Document conditional options -c ? -p part and -p ? -c programmer
2022-09-20 21:39:15 +01:00
97c5ac312a
Shorten redundant programmer description for -c \? -p part
2022-09-20 21:37:49 +01:00
4070ca9012
Distinguish different JTAG programming modes
2022-09-20 18:36:46 +01:00
be40d3b260
add extended parameter "disable_no_sc" for linuxspi programmer
2022-09-20 01:32:12 +09:00
07f1f60020
Make cosmetic changes to avrdude.conf.in
2022-09-16 19:10:39 +01:00
fba2ac0330
Align = of -p? and -c? output
2022-09-16 19:09:35 +01:00
7a76967851
Clarify desc lines for SPM programmers in avrdude.conf.in
2022-09-16 16:14:18 +01:00
669796119a
Add prog_modes lines for par programmers in avrdude.conf.in
2022-09-16 16:13:18 +01:00
f8a62cca34
Print compatible parts for programmer and vice versa using -c? or -p?
...
For example:
$ avrdude -p m328p -c?
$ avrdude -p? -c jtag2dw
2022-09-14 23:00:57 +01:00
0d411f2879
Add prog_modes lines for programmers in avrdude.conf.in
2022-09-14 18:36:37 +01:00
ac8fbadff4
Add assignment injection code for -c*/si
2022-09-14 18:04:12 +01:00
7087fd9f3e
Raise info level for overwriting mcuid to MSG_DEBUG
2022-09-11 23:08:48 +01:00
168a8b92e9
Default mcuid without warning for parts known at compile time
2022-09-11 15:33:23 +01:00
a5f3885b50
Add and modify programmers for gemmaBoot in avrdude.conf.in
2022-09-07 09:56:28 +01:00
Stefan Rueger
Hans
Marius Greuel
Shunichi Wakabayashi