patch #6501: New autotools support for avrdude
* Makefile.am: add @WINDOWS_DIRS@ to SUBDIR
* bootstrap: allow for autconf-2.61 and automake-1.10, too
* configure.ac: fix @WINDOWS_DIRS@ recursion, replace
AC_PROG_CC by AM_PROG_CC_C_O, for esoteric reasons
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@774 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #6074: added support for crossbow's MIB510 programmer
* avrdude.conf.in: Add entry for mib510.
* stk500.c: Add special hooks to handle the MIB510 programmer.
It mostly talks STK500v1 protocol but has a special hello and
goodbye sequence, and uses a fixed block size of 256 bytes.
* doc/avrdude.texi: Document support for mib510.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@773 81a1dc3b-b13d-400b-aceb-764788c761c2
Add check for buffermode feature, and use it if present. Can be
turned off using -x no_blockmode.
* avr910.c: Implement buffermode test and usage.
* avrdude.1: Document -x no_blockmode.
* doc/avrdude.texi: (Ditto.)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@771 81a1dc3b-b13d-400b-aceb-764788c761c2
"classic" AVRs (AT90, ATtiny, ATmega) in both,
ISP and high-voltage programming modes.
* Makefile.am: Add -lm.
* avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp.
* config_gram.y: Add support for the stk600* keywords.
* lexer.l: (Ditto.)
* pgm.h: Add the "chan" parameter to set_varef().
* stk500.c: (Ditto.)
* serial.h: Add USB endpoint support to struct filedescriptor.
* stk500v2.c: Implement the meat of the STK600 support.
* stk500v2.h: Add new prototypes for stk600*() programmers.
* stk500v2_private.h: Add new constants used in the STK600.
* term.c: Add AREF channel support.
* usb_libusb.c: Automatically determine the correct write
endpoint ID, the STK600 uses 0x83 while all other tools use
0x82. Propagate the EP to use through struct filedescriptor.
* usbdevs.h: Add the STK600 USB product ID.
* tools/get-stk600-cards.xsl: XSL transformation for
targetboards.xml to obtain the list of socket and routing
card IDs, to be used in stk500v2.c (for displaying the
names).
* tools/get-stk600-devices.xsl: XSL transformation for
targetboards.xml to obtain the table of socket/routing cards
and their respective AVR device support for doc/avrdude.texi.
* avrdude.1: Document all the STK600 stuff.
* doc/avrdude.texi: Ditto. Added a new chapter for
Programmer Specific Information.
Thanks to Eirik Rasmussen from Atmel Norway for his support in
getting this code running within that short amount of time!
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@768 81a1dc3b-b13d-400b-aceb-764788c761c2
and turn stderr into unbuffered output while producing the
progress report.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@765 81a1dc3b-b13d-400b-aceb-764788c761c2
definition. If present, call the setup hook immediately after finding
the respective programmer object, and schedule the teardown hook to be
called upon exit. This allows the programmer implementation to
dynamically allocate private programmer data.
avr910.c, butterfly.c, jtagmkI.c, jtagmkII.c, stk500v2.c, usbasp.c,
usbtiny.c: Convert static programmer data into dynamically allocated
data.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@764 81a1dc3b-b13d-400b-aceb-764788c761c2
the programmer backend.
jtagmkII.c: Implement the extended parameter jtagchain=
to support JTAG daisy-chains.
avrdude.1, doc/avrdude.texi: Document all of the above.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@761 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #5007: Patch for line-buffering of stdout and stderr
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@757 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #6121: ISP support for the C2N232I device (serial port
bitbanging)
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@755 81a1dc3b-b13d-400b-aceb-764788c761c2
patch #6141: accept binary format immediate values
Detect a 0b prefix, and call strtoul() differently in that case.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@754 81a1dc3b-b13d-400b-aceb-764788c761c2
In ser_recv(): Drop the essentially unused variable "len", and use the
variable "read" in order to track how many bytes have just been read
in.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@753 81a1dc3b-b13d-400b-aceb-764788c761c2
Add definitions for the ATmega329P/3290P. Same as ATmega329/3290
except of the different signature.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@752 81a1dc3b-b13d-400b-aceb-764788c761c2
using default configuration file.
Uncomment the (bogus) stk500_devcode lines for the ATmega164P,
ATmega324P, ATmega644, and ATmega644P definitions. This only affects
users of STK500v1 firmware.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@750 81a1dc3b-b13d-400b-aceb-764788c761c2
"BOOT"-type code, while the standard codes are different (usually one
below).
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@740 81a1dc3b-b13d-400b-aceb-764788c761c2
paged_write backend functions iff the memory area in question has
a page_size != 0.
This is supposed to fix bug #19234: avrdude-5.3.1 segfaults when
stk500v1 tries to program an ATtiny15
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@739 81a1dc3b-b13d-400b-aceb-764788c761c2
resp. Add an entry for the ATmega644P.
Fixes bug #19769: ATmega164p not recognized
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@737 81a1dc3b-b13d-400b-aceb-764788c761c2
something to the serial line. That kind of polling isn't very useful
anyway, and it seems it breaks for the Linux CP210x USB<->RS-232
bridge driver which is certainly a bug in the driver, but we can just
avoid that bug alltogether.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@736 81a1dc3b-b13d-400b-aceb-764788c761c2
ATmega640/1280/1281/2560/2561. Atmel has changed the XML
files after the initial release.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@735 81a1dc3b-b13d-400b-aceb-764788c761c2
*Problem in verbose output of previous commit. I hoped to
have all the verbose changes in a single commit, but that
won't happen...
*Main thing is fixed safemode to turn itself off when you can't
read the fuses anyway. I don't know what I was thinking when
I made it fail out of programmers that don't support fuse reading.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@733 81a1dc3b-b13d-400b-aceb-764788c761c2
include the documentation into the tarball even if the configure had been
run without the --enable-doc.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@726 81a1dc3b-b13d-400b-aceb-764788c761c2
own (duplicate) copy of it.
other files: Constify char pointers.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@725 81a1dc3b-b13d-400b-aceb-764788c761c2
list_parts() and list_programmers() functions into general list
iteration functions that call a caller-supplied callback for each
element. Implement list_parts() and list_programmers() as private
functions in main.c based on that approach.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@724 81a1dc3b-b13d-400b-aceb-764788c761c2
and link main.c against that library.
Add AC_PROG_RANLIB to configure.ac as we are building a library now.
git-svn-id: svn://svn.savannah.nongnu.org/avrdude/trunk/avrdude@723 81a1dc3b-b13d-400b-aceb-764788c761c2
joerg_wunsch
fischl
c_oflynn