292f1d54b9
Update NEWS
2022-12-21 19:14:50 +00:00
217adc543b
Merge pull request #1233 from janegilruud/fix-pickit4-snap-jtag
...
#1052 Add JTAG support for PICkit4 and Snap.
2022-12-21 19:12:33 +00:00
c2070d44c7
Merge pull request #1226 from stefanrueger/optiboot-eeprom
...
Hint at -xeepromrw option in EEPROM error messages
2022-12-21 19:12:06 +00:00
c991ae9739
Read programmer serial number from libusb or hidusb ( #1223 )
...
* Silence compiler warnings
* Fix a fall-through error in switch
* Slightly reformat programmer info printout
Now the target voltage is printed out along with the HW version, FW version and serial number, and they all allign nicely. When in ISP mode, the "SCK period" value is printed _after_ the target voltage readout, and _before_ the additional clocks the programmer holds, such as JTAG, PDI and UPDI clocks.
Co-authored-by: Stefan Rueger <stefan.rueger@urclocks.com>
2022-12-21 19:11:31 +00:00
a696c94d8f
Merge pull request #1220 from stefanrueger/terminal-prompt
...
Remove extraneous avrdude> prompt at end of terminal session
2022-12-21 19:09:51 +00:00
b29dfb77e9
Merge pull request #1219 from MCUdude/pic-mode-recovery
...
Add alternative USB PID for PICkit4/SNAP in PIC mode
2022-12-21 19:09:34 +00:00
3c152dc122
Merge pull request #1216 from MCUdude/slow-clock-error
...
Print meaningful error when a too slow ISP clock is detected
2022-12-21 19:09:11 +00:00
435343bab3
Add more bootloader hashes
2022-12-20 23:25:43 +00:00
c6633fedce
Emphasise -xeepromrw and -xbootsize=<n> in documentation
2022-12-20 22:40:27 +00:00
a2ae465484
#1052 Update PICkit4 and Snap documentation with new modes.
2022-12-20 22:47:06 +01:00
4d9d4050e0
Add hashes for optiboot bootloader instantiations
2022-12-20 21:37:20 +00:00
918e01d93d
#1052 Remove AVR32JTAG support for PICkit4 and Snap.
2022-12-20 12:02:42 +01:00
d1010fd46f
#1052 Add JTAG support for PICkit4 and Snap.
2022-12-20 11:59:00 +01:00
3b14c2df77
Hint at -xeepromrw option in EEPROM error messages
2022-12-17 18:40:09 +00:00
0be8f3b82d
Start sentence with lower case character
2022-12-16 20:27:20 +01:00
412eb9503e
Remove extraneous avrdude> prompt at end of terminal session
2022-12-14 23:17:44 +00:00
30e90bdfd2
Add alternative USB PID for PICkit4/SNAP in PIC mode
2022-12-14 20:11:43 +01:00
159d12693e
Update NEWS
2022-12-14 00:27:13 +00:00
95363a11a7
Terminal read improvements ( #1209 )
...
* Preserve last address read from and length when reading a memory
* Add support for "graceful" memory read rollover
* Add extra padding for memories larger than 64kiB
* Bu default, don't read more bytes than the memory contains
* Prevent users from reading the same memory address twice
* Remove >>> echo and print read/dump command
* Only echo dump command in verbose mode
2022-12-14 00:10:30 +00:00
bbd3ed21ef
Merge pull request #1208 from stefanrueger/urclock-updi
...
Add urclock support for parts with bootloaders in low flash
2022-12-14 00:08:27 +00:00
b10854677d
Consider libedit only in interactive mode ( #1207 )
2022-12-14 00:07:41 +00:00
72f097502f
Merge pull request #1206 from stefanrueger/nsafety
...
Fix reading of .elf files
2022-12-14 00:06:47 +00:00
e4f10a33ab
Clarify comment
2022-12-13 23:59:58 +00:00
9bd4dee254
Merge pull request #1205 from janegilruud/jtag3-tpi-jer
...
Added TPI support for Microchip tools
2022-12-13 23:56:25 +00:00
f08f771ab4
#822 Fixed print_parms for TPI.
2022-12-13 15:07:14 +01:00
af43a7757d
#822 Print Vtarget when using TPI.
2022-12-12 14:31:41 +01:00
2561d87fbd
#822 Removed JTAGICE3 TPI support.
2022-12-12 14:10:42 +01:00
db0258a7d8
Add fuses, usersig, userrow, signature and data to elf_mem_limits()
2022-12-10 23:28:56 +00:00
8024bfd4fb
Add partial urclock support for parts with bootloaders in low flash
2022-12-03 23:20:05 +00:00
6b03d7dc5a
Correct upper flash boundary for 8-bit AVR parts in elf_mem_limits()
2022-12-03 13:39:28 +00:00
23dddef64b
Mark unused function parameters as such
2022-12-02 19:03:06 +00:00
f688baabb7
Improve error messaging
2022-12-02 18:45:47 +00:00
2e98ee3a1c
Check elf section fits into memory and fail elf2b() on elf handling errors
2022-12-02 18:28:19 +00:00
3b30e5d424
Fix elf2b() to consider all sections in segments
2022-12-01 20:29:54 +00:00
0ae632070f
Rewrite elf2b() in equivalent way absorbing elf_get_scn()
2022-12-01 20:21:33 +00:00
8db18e64ed
Remove redundant mem-check.
2022-12-01 20:12:26 +01:00
dc64fb716f
Fix wrongfully call to initCache() according to stefanrueger's instructions.
2022-12-01 20:05:55 +01:00
f78e14ee96
Revert "Skip chaching when size of memory is 0."
...
This reverts commit bb808e8d5f
2022-12-01 20:01:11 +01:00
bb808e8d5f
Skip chaching when size of memory is 0.
2022-12-01 15:16:23 +01:00
e18b5c4fb0
Made the code a little prettier.
2022-12-01 00:01:29 +01:00
b643f0a1a0
#822 Fixed bug in TPI byte write for ATtiny20 and ATtiny40.
2022-11-30 23:49:20 +01:00
b52bd393de
#822 Added TPI support for JTAGICE3.
2022-11-30 23:39:37 +01:00
95160e8801
Changed verbose level on TPI initialize notice.
2022-11-30 23:21:30 +01:00
e87a9b59b6
#822 Added and tested TPI support for AtmelICE, PowerDebugger, PICkit4 and Snap.
2022-11-30 23:08:55 +01:00
1eb6a06055
#822 Small refactoring and clean up.
2022-11-30 23:07:05 +01:00
cad296f780
Attempt to fix msvc builds.
2022-11-30 00:27:25 +01:00
90bd24a902
#822 Added support for TPI page write.
2022-11-30 00:14:19 +01:00
ea2d7eec95
Fix fopen() file mode in fileio_fmt_autodetect()
2022-11-29 19:46:48 +00:00
2f5566a8ed
#822 Added support for TPI page load.
2022-11-29 20:34:05 +01:00
f2156b834d
#822 Added sigrow memory to tiny102 and tiny 104, and removed duplicate lockbits.
2022-11-29 09:52:45 +01:00
Stefan Rueger
Hans
Jan Egil Ruud
Jan Egil Ruud
Jörg Wunsch